hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
26,872 Commits
5 Branches
29 Tags
205 MiB
Commit Graph

364 Commits (3a43738e214a256dbe59f17796ddb967b08ee67c)

Author SHA1 Message Date
Jonas Gorski 1beaf031d1 target: don't build jffs2 nor images by default 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36863
 2013-06-05 20:58:59 +00:00
John Crispin e9ef65175d lantiq: revert [36779] as it caused a regression 
submitter was informed of a endinaess swap regression and replied with "works on my board"

revert the patch and make arv7518 wifi work again

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36807
 2013-05-31 13:25:07 +00:00
John Crispin e60cb01c45 lantiq: ARV752DPW: fix reboot loop caused by wrong GPIO setting 
The GPIO buttons of ARV752DPW are active low.

Treating them as active high caused a reboot loop as a reset-button
press is detected by gpio-button-hotplug/gpio-keys-polled on startup.

This fixes: https://dev.openwrt.org/ticket/12642

Signed-off-by: Rafael Gieschke <rafael@gieschke.de>

SVN-Revision: 36783
 2013-05-30 16:01:06 +00:00
John Crispin c2b1e9eeef lantiq: Fix ar8216 switch configuration 
On linux 3.8 the switch is named as "switch0", but the network configuration script names it as "eth0", causing no communication over ethernet due to no proper VLAN config.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 36782
 2013-05-30 16:00:59 +00:00
John Crispin 090a75447b lantiq: DGN3500 support 
This requires all the preceding patches and finishes support for the
DGN3500, also removing an obsolete file.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36781
 2013-05-30 16:00:50 +00:00
John Crispin d1f3751d05 lantiq: wifi calibration from MTD 
This patch enables retrieving the wifi calibration data from an MTD
partition. It requires the previous patch.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36779
 2013-05-30 16:00:32 +00:00
John Crispin 83c3cd4ed9 lantiq: postpone PCI and wifi init 
This postpones the initialization of PCI and wifi until after the MTD
initialization, so that calibration data may be loaded from there.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36778
 2013-05-30 16:00:24 +00:00
John Crispin b585923cc9 lantiq: fix LED-handling oversights 
This reassigns the PPPoE status to the LED that was intended to indicate
it, rather than the DSL sync light.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36777
 2013-05-30 16:00:15 +00:00
Gabor Juhos 46225b99d9 kernel: update linux 3.8 to 3.8.13 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36724
 2013-05-26 16:02:31 +00:00
Jonas Gorski 526aedb705 kernel: move CONFIG_MIPS_SEAD3 to generic 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36617
 2013-05-12 21:41:55 +00:00
Gabor Juhos e57c7d6c12 kernel: update linux 3.8 to 3.8.12 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36576
 2013-05-08 08:53:53 +00:00
John Crispin eb10f052ce lantiq: enable portmaps again and set max port to 2 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36573
 2013-05-07 10:58:52 +00:00
Gabor Juhos 8a9fe26f20 kernel: update linux 3.8 to 3.8.11 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36507
 2013-05-01 22:15:18 +00:00
Gabor Juhos f718179af5 kernel: update linux 3.8 to 3.8.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36493
 2013-04-30 10:43:59 +00:00
Gabor Juhos 36d4fd70bc kernel: update linux 3.8 to 3.8.9 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36453
 2013-04-26 16:55:42 +00:00
John Crispin b42a173664 lantiq: make leds and network work on VG3503J 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36445
 2013-04-25 19:03:41 +00:00
John Crispin 520bf46375 lantiq: fix board detection helpers 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36444
 2013-04-25 19:03:37 +00:00
John Crispin 157c86371f lantiq: move dts files to thir own folder 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36443
 2013-04-25 19:03:32 +00:00
John Crispin 9ae3adbe3c lantiq: disable sw portmaps on xrx200 ethernet as segment solation does not work yet 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36441
 2013-04-25 19:03:25 +00:00
John Crispin d3d18ae812 lantiq: make lzma-loader based images for VG3503J 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36440
 2013-04-25 19:03:21 +00:00
John Crispin a46acc80e4 lantiq: update VG3503J.dts to match new partition layout 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36439
 2013-04-25 19:03:17 +00:00
John Crispin 46306c2e47 lantiq: add lzma-loader source 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36438
 2013-04-25 19:03:13 +00:00
Gabor Juhos 151cadfe32 kernel: update linux 3.8 to 3.8.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36363
 2013-04-19 08:07:34 +00:00
Gabor Juhos 604395650a kernel: update linux 3.8 to 3.8.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36332
 2013-04-14 09:25:53 +00:00
John Crispin d5f87e193c add VG3503J support 
this adds basic support. the bootloader on these units is locked down.

until we have a replacement we can do basic testing with these env variables in uboot.

set update_openwrt erase 0xb0020000 0xb073ffff \;tftp 0x81000000 openwrt-lantiq-xway-VG3503J-squashfs.image\;cp.b 0x81000000 0xb0020000 \$(filesize)
set bootcmd cp.b 0xb0020000 0x80002000 0x400000\; go 0x80002000

unfortunatley the bootloader ignores the bootcmd, so autobooting is not possible yet. you need to call "run bootcmd" by hand after each power cycle.

please note that the vdsl firmware is non redistributable. you can find it in the GPL drop that BT provides.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36315
 2013-04-11 19:18:07 +00:00
John Crispin fbc1e3732b add FE phy firmware 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36314
 2013-04-11 19:17:48 +00:00
John Crispin 0d32469457 add missing pinmux patch 
Fix lantiq pinmux which affected PCI and USB.

Known affected boards are: ARV4518 and ARV7518.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 36312
 2013-04-11 07:12:37 +00:00
Steven Barth ea94d66b0f Adapt default network configuration for IPv6 
SVN-Revision: 36278
 2013-04-09 08:03:08 +00:00
Gabor Juhos f78c902cfd kernel: update linux 3.8 to 3.8.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36215
 2013-04-06 11:40:44 +00:00
John Crispin d9bb7ff7a5 Migrate lantiq platform to common led helper functions 
http://patchwork.openwrt.org/patch/3316/

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 36187
 2013-04-03 10:01:07 +00:00
John Crispin a4c745ee74 add a missing patch that makes board detection work again 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36186
 2013-04-03 10:01:03 +00:00
Gabor Juhos 07532dca7f kernel: update linux 3.8 to 3.8.3 
Also refresh the related generic/platform patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36039
 2013-03-15 14:39:51 +00:00
John Crispin 4d5860cdd6 ACMP252: fix USB-enable GPIO and use default PCI configuration for now 
EEPROM is an actial serial EEPROM on the WiFi module, therefore we can remove
ralink_eep from the dts.
USB power-enable GPIO turned out to be GPIO #3 (found via probing/brute-force).
PCI works with default settings as long as the vendor bootloader is used.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 36030
 2013-03-14 18:43:54 +00:00
John Crispin 0dbe4f502d fix buttons on vr9 eval kit 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36029
 2013-03-14 18:43:49 +00:00
John Crispin 9b4a8c6d1e select vdsl packages on vr9 boards 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36028
 2013-03-14 18:43:44 +00:00
John Crispin 0f7f1f3347 fix fritzbox 3370 partitions/memory/cmdline 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36027
 2013-03-14 18:43:39 +00:00
John Crispin 5452dbad61 build jffs images for nand based fritzbox 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36026
 2013-03-14 18:43:34 +00:00
John Crispin b98ae2b149 bump to v3.8 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36014
 2013-03-14 18:42:29 +00:00
John Crispin 3ab75692f3 move GPHY FW blobs to non versioned folder 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36013
 2013-03-14 18:42:21 +00:00
John Crispin 48a4b3a0cd fixes NO_XIP on CFI0001 flash 
This patch disables the execute-in-place (XIP) support for flash on
lantiq. This has to be disabled since the bus which flash is connected
to does not support unaligned accesses. Resolves data bus errors on
Lantiq routers with Intel command set flash.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 35992
 2013-03-12 13:53:08 +00:00
John Crispin e3a6ea65e1 add support for AudioCodes AC-252 
user-space support for extracting the EEPROM for the RaLink WiFi is still
missing. Besides this, it's all working.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 35990
 2013-03-12 13:52:54 +00:00
John Crispin 0b881eea72 unbreak dgn3500 spi-gpio 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 35989
 2013-03-12 13:52:47 +00:00
Gabor Juhos 23b3b3a194 kernel: update linux 3.7 to 3.7.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35860
 2013-03-03 13:57:40 +00:00
Gabor Juhos 3f749d1e8e kernel: update linux 3.7 to 3.7.9 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35644
 2013-02-17 21:32:42 +00:00
Gabor Juhos 162b8e23a5 kernel: update linux 3.7 to 3.7.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35604
 2013-02-15 07:36:15 +00:00
Gabor Juhos bae4bfe3f8 kernel: update linux 3.7 to 3.7.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35571
 2013-02-12 09:51:11 +00:00
Gabor Juhos 08ff976720 kernel: update linux 3.7 to 3.7.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35476
 2013-02-04 10:02:56 +00:00
Gabor Juhos 562ba537fc kernel: update linux 3.7 to 3.7.5 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35390
 2013-01-29 18:29:45 +00:00
John Crispin a0f7a3c214 dont load gptu on ase 
fixes #12792

SVN-Revision: 35357
 2013-01-28 17:46:07 +00:00
John Crispin 0de0955931 refresh patches 
SVN-Revision: 35355
 2013-01-28 17:44:20 +00:00
John Crispin 0183df8ed9 Fix ARV7518 USB 
This patch correctly fixes USB on Lantiq ARV7518.
There was a failed attempt on fixing this on r35077 (https://dev.openwrt.org/changeset/35077/).

Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35354
 2013-01-28 17:43:35 +00:00
John Crispin 3534757bb9 Add ath9k eeprom and pci fixup support 
Add ath9k eeprom and pci fixup support (again) for linux 3.7.

On linux 3.3, the fixup forced the regdomain to 0x67, causing low TX power.
This patch only corrects checksum, the rest of the EEPROM isn't changed.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35353
 2013-01-28 17:43:25 +00:00
John Crispin 5eb43d4cf8 Add support for ARV4518PW R01 and rename R01A. 
There are two different versions of SMC7908A-ISP: R01 and R01A.
R01 has an internal clock for PCI, meanwhile R01A has an external clock.

This fixes: https://dev.openwrt.org/ticket/12884

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35352
 2013-01-28 17:42:59 +00:00
Felix Fietkau ed7ca5d44e kernel: clean up crypto related kconfig options 
SVN-Revision: 35327
 2013-01-27 17:23:12 +00:00
Gabor Juhos 15be1c9ee7 kernel: update linux 3.7 to 3.7.4 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35318
 2013-01-24 17:08:37 +00:00
Jo-Philipp Wich 3a2cccda2e all targets: use numerically prefixed uci-defaults file names to better control order of execution 
SVN-Revision: 35217
 2013-01-18 12:42:53 +00:00
Gabor Juhos 0de21d9747 kernel: update linux 3.7 to 3.7.3 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35216
 2013-01-18 11:44:42 +00:00
Gabor Juhos c19c30cefd kernel: update linux 3.7 to 3.7.2 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35100
 2013-01-12 11:43:08 +00:00
John Crispin 64910f4490 fixes USB reset on ARV7518 
SVN-Revision: 35077
 2013-01-10 06:44:58 +00:00
John Crispin 4834d09a3f fixes none-pci build 
SVN-Revision: 35062
 2013-01-09 09:04:09 +00:00
John Crispin 624eb36fff adds missing symbol 
SVN-Revision: 34939
 2012-12-30 21:31:10 +00:00
John Crispin ce57efa3ea fixes usb port on arv 4518 
SVN-Revision: 34935
 2012-12-30 12:38:40 +00:00
Felix Fietkau 41a039f464 mips: use -mno-branch-likely for kernel and userspace, saves ~11k kernel size after lzma and ~12k squashfs size in the default configuration 
SVN-Revision: 34909
 2012-12-28 19:17:19 +00:00
John Crispin efe3225e2b ar9 did not load atm driver properly 
SVN-Revision: 34840
 2012-12-22 10:16:52 +00:00
John Crispin 379cd6e25e dont use input layer for gpio buttons 
SVN-Revision: 34839
 2012-12-21 20:04:20 +00:00
John Crispin 90a3761b0b default switch setup for WBMR 
SVN-Revision: 34838
 2012-12-21 20:04:12 +00:00
John Crispin ae0b9ff1ce Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii seems to fix the communication issues with the ar8316 switch. (ticket #11143) 
Tested only on the wbmr-hp-g300h, could affect/break other devices.

Signed-off-by: Sebastian Mayr <sebastian.mayr@student.uibk.ac.at>

SVN-Revision: 34837
 2012-12-21 20:04:04 +00:00
John Crispin 9818a1f00b adds script to set wps info on boards with a wps button 
SVN-Revision: 34836
 2012-12-21 20:03:59 +00:00
John Crispin 3134205dfd minor tweaks to WBMR image 
SVN-Revision: 34835
 2012-12-21 20:03:54 +00:00
John Crispin f4b2439554 add missing PHY_BASIC_FEATURES to 100mbit phys 
SVN-Revision: 34826
 2012-12-21 14:41:35 +00:00
John Crispin 861bf6af49 fix typo inside fritz3370 devicetree file 
SVN-Revision: 34825
 2012-12-21 14:41:30 +00:00
John Crispin 54c096527a more devicetree fixes 
SVN-Revision: 34824
 2012-12-21 13:47:55 +00:00
John Crispin 59cc6d9ddd improve button handling 
SVN-Revision: 34823
 2012-12-21 13:47:50 +00:00
John Crispin 7ce4c81647 add phy-reset gpio handling to xrx200-net 
SVN-Revision: 34822
 2012-12-21 13:47:44 +00:00
John Crispin 42d668174e add more lantiq phy ids based on daniels uboot code 
SVN-Revision: 34821
 2012-12-21 13:47:40 +00:00
John Crispin 16c5946f8b refresh patch and install v1.1 gphy blobs 
SVN-Revision: 34820
 2012-12-21 13:47:35 +00:00
John Crispin 1b0aaff246 adds a fix for ar8216 mii detection on etop driver 
SVN-Revision: 34795
 2012-12-19 16:20:24 +00:00
Mirko Vogt e34a4e0c7b Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh) 
SVN-Revision: 34793
 2012-12-19 16:07:50 +00:00
John Crispin 687920ba3e minor basefiles fixes 
SVN-Revision: 34790
 2012-12-19 15:17:42 +00:00
John Crispin e472671bde fix gptu clocks 
SVN-Revision: 34789
 2012-12-19 15:17:31 +00:00
John Crispin 5495ffbfdf more board file fixes 
SVN-Revision: 34788
 2012-12-19 15:17:11 +00:00
John Crispin 4aa8272c8b fix gptu patch - tapi should now load 
SVN-Revision: 34777
 2012-12-18 20:12:57 +00:00
John Crispin af48676b28 update to 3.7.1 
SVN-Revision: 34771
 2012-12-18 19:32:01 +00:00
John Crispin 7bcb6b5479 make pinctrl-falcon honour status="disbaled"; 
SVN-Revision: 34714
 2012-12-16 10:03:28 +00:00
John Crispin 573cf13419 fix falcon profile 
SVN-Revision: 34713
 2012-12-16 10:03:23 +00:00
John Crispin 33d3433d75 fix i2c-lantiq module 
SVN-Revision: 34712
 2012-12-16 10:03:18 +00:00
John Crispin b637eb598d add falcon devicetree files 
SVN-Revision: 34711
 2012-12-16 10:03:11 +00:00
John Crispin 3ca51b5399 select hcd as a default package for the dgn3500 
SVN-Revision: 34702
 2012-12-15 11:01:16 +00:00
John Crispin 85e4da7e23 EASY80920 has 2 usb ports 
SVN-Revision: 34701
 2012-12-15 11:01:11 +00:00
John Crispin 3dac521a49 remove 3.3 and 3.6 
SVN-Revision: 34699
 2012-12-15 02:01:08 +00:00
John Crispin 1dece11487 cleanup basefiles 
SVN-Revision: 34698
 2012-12-15 02:01:00 +00:00
John Crispin 601bc28669 clean up modules.mk 
SVN-Revision: 34697
 2012-12-15 02:00:55 +00:00
John Crispin 2c33df0376 add devicetrees 
SVN-Revision: 34691
 2012-12-15 02:00:20 +00:00
John Crispin 3a948770cf add linux-v3.7 
SVN-Revision: 34687
 2012-12-15 01:59:45 +00:00
Gabor Juhos 2b378d11c8 kernel: update linux 3.6 to 3.6.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34639
 2012-12-11 20:14:39 +00:00
Gabor Juhos 2581173660 kernel: update linux 3.6 to 3.6.9 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34578
 2012-12-08 15:01:33 +00:00
Gabor Juhos c2f018fca2 remove common symbols from 3.6 configs 
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34404
 2012-11-29 15:21:41 +00:00
Gabor Juhos 1f516235ea remove common symbols from 3.3 configs 
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34403
 2012-11-29 15:21:35 +00:00
Gabor Juhos 3a4d0ebd5c kernel: update linux 3.6 to 3.6.8 
Also refresh the affected patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34402
 2012-11-29 07:42:19 +00:00
John Crispin f7ead0a2d5 adds proper package selection for dgn3500 
SVN-Revision: 34286
 2012-11-21 06:06:48 +00:00
Gabor Juhos ff1e854511 kernel: update linux 3.6 to 3.6.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34227
 2012-11-18 08:41:31 +00:00
John Crispin 3b419e506c fixes ar9 / dgn3500 support 
SVN-Revision: 34180
 2012-11-13 08:54:14 +00:00
John Crispin 71ddec8091 add more profiles 
SVN-Revision: 34131
 2012-11-09 19:26:58 +00:00
John Crispin 88e4d93802 a few more dts files (WIP) 
SVN-Revision: 34130
 2012-11-09 19:26:43 +00:00
John Crispin a30b3066ce add mtd split and atm patch 
SVN-Revision: 34129
 2012-11-09 19:26:30 +00:00
John Crispin 7404e59bbd add OWRTDTB marker patch 
SVN-Revision: 34100
 2012-11-06 10:39:43 +00:00
John Crispin 3a1851964e add support for arv7525 
SVN-Revision: 34097
 2012-11-06 07:38:24 +00:00
Gabor Juhos e8669729bc kernel: update linux 3.6 to 3.6.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34086
 2012-11-05 13:22:09 +00:00
John Crispin 05fbb370dc 3.6 is not the default yet 
SVN-Revision: 34065
 2012-11-03 13:29:44 +00:00
John Crispin a9ad36b7f1 adds dts files and make devicetree images buildable 
SVN-Revision: 34064
 2012-11-02 20:07:47 +00:00
John Crispin c8ae6dac56 update ase target for 3.6 
SVN-Revision: 34063
 2012-11-02 20:07:41 +00:00
John Crispin dc8641f7fa add subtarget, as of 3.6 we dont seperate xway SoC 
SVN-Revision: 34062
 2012-11-02 20:07:36 +00:00
John Crispin dd619da4fc adds 3.6 files, patches and config 
SVN-Revision: 34061
 2012-11-02 20:07:26 +00:00
John Crispin 736835343c move files/ -> files-3.3/ 
SVN-Revision: 34060
 2012-11-02 20:07:02 +00:00
John Crispin fa316620a7 prepare Makefile for 3.6 
SVN-Revision: 34059
 2012-11-02 20:06:51 +00:00
Gabor Juhos e91dc2e5b3 target: refresh all target configs with kconfig.pl 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33987
 2012-10-29 10:11:05 +00:00
John Crispin 6993e19532 drop GPIODEV platform code 
SVN-Revision: 33825
 2012-10-17 21:53:37 +00:00
John Crispin 9dc218f88f tapi was not registeredproperly for most arcadyan boards 
SVN-Revision: 33591
 2012-09-28 20:57:06 +00:00
Gabor Juhos 43147ffec5 generic: move GENERIC_PWM symbol into the generic config 
SVN-Revision: 33383
 2012-09-13 06:38:31 +00:00
Luka Perkov 4c76b3635b lantiq: fix sx76x default uci network configuration 
SVN-Revision: 33324
 2012-09-06 00:09:46 +00:00
John Crispin 64b385dda7 pci gpio mapping 
This patch fixes the GPIO ALTSEL settings for some of the GPIOs used by the PCI subsystem in Lantiq Danube. These changes are required for more than one PCI device to work. Tested with an ARV7510PW having two PCI-devices; a VIA USB controller and a Ralink WLAN mini-PCI card.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 33054
 2012-08-08 12:14:43 +00:00
John Crispin 5f438c3565 W502V/ARV4525 wireless mac bugfix 
The ARV4525 board init is passing the wrong offset to
arv_register_ath5k() resulting in a bogus mac.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 32993
 2012-08-04 20:14:52 +00:00
John Crispin 060b161ca6 cleanup patches 
SVN-Revision: 32953
 2012-08-03 08:53:02 +00:00
John Crispin c2d3274ffc fixes i2c clock enable 
SVN-Revision: 32949
 2012-08-02 13:29:49 +00:00
John Crispin f5f36911f0 add lantiq svip support 
SVN-Revision: 32925
 2012-07-31 18:49:54 +00:00
John Crispin 5178c177dc rebase config-3.3 
SVN-Revision: 32797
 2012-07-24 17:28:25 +00:00
John Crispin 48869ef7c0 move CONFIG_ETHERNET_PACKET_MANGLE to a generic config file 
This broke falcon builds

SVN-Revision: 32794
 2012-07-24 15:33:01 +00:00
John Crispin 95e69ac4f1 clean up generic image building 
SVN-Revision: 32065
 2012-06-05 17:49:42 +00:00
John Crispin a4d96aae8d bump to 3.3.8 
SVN-Revision: 32055
 2012-06-05 06:57:51 +00:00
Luka Perkov 7f00e5ffc6 uboot-envtools: update to 2012.04.01 
SVN-Revision: 32051
 2012-06-04 21:55:49 +00:00
John Crispin 2b4ef2eafa adds unset Kbuild symbol 
SVN-Revision: 32026
 2012-06-02 14:03:32 +00:00
John Crispin 47ef62d1b8 adds patch to make Tantos (psb6970) switch buildable again 
SVN-Revision: 32006
 2012-05-30 17:41:28 +00:00
Gabor Juhos ff74305623 lantiq: use the generic uci-default functions for initial LED setup 
SVN-Revision: 31995
 2012-05-29 16:39:21 +00:00
John Crispin f567980d38 move files-3.3 -> files 
SVN-Revision: 31912
 2012-05-27 16:13:02 +00:00
John Crispin 8002770520 3.2 R.I.P. 
SVN-Revision: 31911
 2012-05-27 16:12:59 +00:00
John Crispin 81ddc886e1 dgn3500 support with eeprom loading from sysfs 
WIFI eeprom:
As discussed, it is impossible for nand and spi flash platforms to have the eeprom data available from mtd. I suggested to load the eeprom from user-space. I've looked into regular firmware loading but this is only possible when using modules.  I've created a sysfs entry that allows reading and writing the eeprom data to the platform data. After loading the eeprom data I rely on pci-hotplug support to disable the bogus pci device and rescan the bus (with fixups and all). Because hotplug is not available, an init script is created that performs the copy from mtd to platform data. I think it is best to eventually move the sysfs functions to dev_wifi_athxk.c file, this would get rid of the external to the ath9k platform data.

SPI flash:
It seems that the spi-xway driver is not really working. It causes my kernel to crash in all sorts of ways. I added to bitbang SPI to be able to the calibration data mention above.
I've kept the original mtd partitioning that Netgear uses.

Buttons/LED:
Both buttons are working properly. Two leds are not enabled: The red internet led is connected to the pci_gnt1 pin... I can't disable it because then DMA stops working.
The green wifi led is connected to an unknown atheros gpio.

Signed-off-by: Pieter Voorthuijsen <p.voorthuijsen at gmail.com>

SVN-Revision: 31910
 2012-05-27 16:02:22 +00:00
John Crispin 6e8fe84472 fixes zyxel p2601hnfx 
moves the linux partition, removes the config partition and the
buttons settings have small adjustments.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31909
 2012-05-27 16:02:20 +00:00
John Crispin 3f2f50c681 Add basic configuration for new board ZTE H201L. Still missing are button and led gpio values. 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31908
 2012-05-27 16:02:16 +00:00
Gabor Juhos 2ae5581447 kernel: update linux 3.3 to 3.3.7 
SVN-Revision: 31848
 2012-05-23 21:05:32 +00:00
Felix Fietkau 9037c2ccc6 lantiq: allow platforms with rt2x00 to override the mac address without overriding eeprom, fixes bogus wlan mac address on arv4520 
SVN-Revision: 31835
 2012-05-20 21:58:03 +00:00
Gabor Juhos 39994008cb linux: move certain disabled symbols to the generic configs 
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
 2012-05-15 10:58:52 +00:00
John Crispin 364f47e454 code style cleanup of the mach files 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31735
 2012-05-15 09:38:05 +00:00
John Crispin 07dca108a9 adds zyxel p2601hnfx support 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31734
 2012-05-15 09:38:02 +00:00
John Crispin 9785ec070e set 3.3.6 as default 
SVN-Revision: 31733
 2012-05-15 09:37:59 +00:00
John Crispin c61ada1db8 set 3.3.5 as default 
SVN-Revision: 31718
 2012-05-14 16:11:26 +00:00
Gabor Juhos b472e5d12e kernel: update linux 3.3 to 3.3.6 
SVN-Revision: 31709
 2012-05-14 09:18:32 +00:00
John Crispin dc4cfd3a64 Add 3.3 config files 
SVN-Revision: 31672
 2012-05-09 12:52:24 +00:00
John Crispin 75827c538d Add missing 3.3 patches 
SVN-Revision: 31671
 2012-05-09 12:52:21 +00:00
John Crispin 7d638fbb2f Drop 2.6.32 support 
SVN-Revision: 31670
 2012-05-09 12:52:19 +00:00
Gabor Juhos 34018a630f kernel: update linux 3.3 to 3.3.5 
SVN-Revision: 31645
 2012-05-07 20:11:43 +00:00