e87bb77966
ar8216: use vlan configuration for connecting ports (forced to be untagged) even with vlan_enable=0, but keep them isolated before the switch has been configured this makes enable_vlan=0 practical for vlan passthrough
...
SVN-Revision: 29719
2012-01-12 10:15:11 +00:00
c33e016fa5
ar8216: do not strip vlan tags when running with vlan_enable=0
...
SVN-Revision: 29718
2012-01-12 10:15:08 +00:00
8b567fb508
generic: add driver for the RTL8367R/M switches
...
SVN-Revision: 29678
2012-01-07 19:36:31 +00:00
87fb92ee03
generic: rtl8366: preparing for RTL8367 support
...
* make clock delay configurable
* make read,write commands configurable
* use u16 for member and untag fields
SVN-Revision: 29677
2012-01-07 19:36:30 +00:00
43196813d7
generic: rtl8366_smi: add timeout message
...
SVN-Revision: 29676
2012-01-07 19:36:25 +00:00
5fa65cba6e
kernel: swconfig: introduce a generic switch LED trigger
...
SVN-Revision: 29627
2011-12-31 15:02:30 +00:00
bbfaaeffd6
kernel: ar8216: add support for the AR8236 switch
...
SVN-Revision: 28993
2011-11-12 14:09:52 +00:00
ecb3690d0a
kernel: ar8216: move port vlan setup into a separate function
...
SVN-Revision: 28992
2011-11-12 14:09:50 +00:00
297ac9a7f1
kernel: swconfig: add a missing unlock in error path
...
SVN-Revision: 28753
2011-11-04 14:38:31 +00:00
b7a2a74823
ar8216: use mdiobus_{read,write} to ensure proper locking
...
SVN-Revision: 28421
2011-10-11 23:05:10 +00:00
93c093057d
generic: jumbo frames support for rtl8366s
...
This patch adds the option to enable jumbo frames on the rtl8366s
switch. This is almost exactly the same as the first patch at
https://dev.openwrt.org/ticket/7977 and it has been requested
in a comment there.
I have tested this and it successfully allows devices on the switch
using jumbo frames to communicate.
Signed-off-by: Ash Hughes <ashley.hughes@blueyonder.co.uk>
SVN-Revision: 28267
2011-09-21 11:47:38 +00:00
bb64fb2e58
generic: ar8216: add support for get link status
...
SVN-Revision: 27989
2011-08-15 14:11:41 +00:00
eaa935658b
swconfig: Add generic switch identifiers
...
Also make switches available under a generic name "switch<num>" for device
name agnostic access. The old device name is used as an alias for backward
compatibility.
SVN-Revision: 27800
2011-07-27 18:00:18 +00:00
5b32d62fcf
rtl8366_smi: implement a function for detecting whether the attached switch is RTL8366S or RTL8366RB
...
SVN-Revision: 27755
2011-07-24 14:40:31 +00:00
1afe8a0726
rtl8366: unify rtl8366s and rtl8366rb platform data
...
SVN-Revision: 27754
2011-07-24 14:40:23 +00:00
60c125b8e6
(respin) 802.1Q VLAN support for ADM6996M/ADM6996FC
...
This patch adds 802.1Q VLAN support for the ADM6996M chip.
The driver is loaded for both the FC and M model. It will detect which of the
two chips is connected. The FC model is initialised, but no further
functionality is offered.
The PHY driver will always report "100 Mbit/s, link up", for both the M and FC
models. This reflects the fact that the link between switch chip and Ethernet
MAC is always on[1].
Further documentation can be found in the kernel's
Documentation/networking/adm6996.txt
Signed-of-By: Peter Lebbing <peter@digitalbrains.com>
SVN-Revision: 26865
2011-05-09 15:21:58 +00:00
eb270c4d33
ar8316: automatically detect whether port4 is used as PHY or as a switch port
...
SVN-Revision: 26778
2011-04-28 21:27:37 +00:00
2336d4b438
ar8216: support AR8316 rev 0 devices
...
SVN-Revision: 26776
2011-04-28 19:30:43 +00:00
9e8cd78944
swconfig: Replace SPIN_LOCK_UNLOCKED with DEFINE_SPINLOCK
...
SPIN_LOCK_UNLOCKED has been deprecated since 2.6.19 and will get removed
in 2.6.39, so replace it with DEFINE_SPINLOCK().
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26770
2011-04-26 23:05:29 +00:00
f358166236
generic: rtl8366{s,rb}: remove the PHY driver.
...
Since the PHY driver is only used for the WAN port and there is virtually
no difference between it and the generic PHY driver, we can sefely remove
it.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26600
2011-04-12 09:29:07 +00:00
0508ee0c00
rtl8306: do not overwrite registers in the phy fixup, it could mess up other switches ( fixes #8911 )
...
SVN-Revision: 26410
2011-04-02 16:35:22 +00:00
4f1f672d9e
generic: rtl8366s: allow initial register values to be passed via platform_data
...
SVN-Revision: 25120
2011-01-26 20:35:46 +00:00
5641e8233e
generic: rtl8366: fix build error
...
SVN-Revision: 24943
2011-01-09 05:36:44 +00:00
792a1fb2c0
generic: rtl8366: enable vlans before enabling the ports
...
SVN-Revision: 24939
2011-01-08 20:24:29 +00:00
c16715f8d2
generic: rtl8366: enable ports only after VLAN configuration is done
...
SVN-Revision: 24938
2011-01-08 20:24:26 +00:00
0bcc97ac26
generic: rtl8366: add enable_port helper
...
SVN-Revision: 24937
2011-01-08 20:24:22 +00:00
5120660512
generic: rtl8366_smi: init VLANs only in first switch initialization
...
SVN-Revision: 24936
2011-01-08 20:24:18 +00:00
d88fc86fca
generic: rtl8366s: use correct bitmasks in sanity checks
...
SVN-Revision: 24935
2011-01-08 18:04:04 +00:00
ec9b5d6243
generic: rtl8366s: add vlan fid support
...
SVN-Revision: 24934
2011-01-08 18:04:00 +00:00
72779e560b
generic: rtl8366: add debugfs file for VLAN4K table
...
SVN-Revision: 24933
2011-01-08 18:03:57 +00:00
a4472870bd
generic: rtl8366rb: use correct bitmasks in sanity checks
...
SVN-Revision: 24930
2011-01-08 11:28:35 +00:00
90c0618011
generic: add rtl8366rb switch vlan fid support
...
Allows to use fids 0 to 7. Default is 0.
Those who will use this don't forget to `set vlan fid` every time
after `set vlan ports` if you want non default behavior.
Minor changes. Version bump.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 24125
2010-11-24 10:01:21 +00:00
edcbafc836
fix mvswitch PHY polling setting ( #8133 )
...
SVN-Revision: 23862
2010-11-04 14:09:20 +00:00
0ee2fda5e1
rt8366*: use __devinit instead of __init for the probe function to fix a section mismatch
...
SVN-Revision: 23573
2010-10-21 18:42:05 +00:00
352fea83d9
unify extended vlan id swconfig attributes. AR8216 and PSB6970 used "pvid", IP17xx used "tag" and RTL8306 called it "vid". Change all to "vid" and annotate the description with the valid ID range.
...
SVN-Revision: 23419
2010-10-12 20:49:35 +00:00
dc4df4ca65
generic: RTL8366S/RB: Fix autonegotiation for the WAN port.
...
The RTL8366S/RB support connecting a second mac to it and using the 5th
port as an independent phy. Therefore we need to handle autonegotiation
changes for phy 4 like on a single phy device.
This fixes #7980 , verified on a WNDR3700.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 23127
2010-09-27 14:42:05 +00:00
5721f06fe1
generic: add rtl8366rb switch port rate, port and qos enable/disable support
...
Patch-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 23126
2010-09-27 14:41:54 +00:00
0ca31140aa
add switch driver for Lantiq PSB6970
...
Tested on ifxmips based board. The PSB6970 is also known as the Infineon Tantos switch.
Signed-off-by: Ithamar R. Adema <ithamar.adema@team-embedded.nl>
SVN-Revision: 22914
2010-09-04 18:06:01 +00:00
08755b8858
rtl8366_smi: when setting VLAN ports, always initialize the PVID to ensure that the VLAN MC entry gets allocated. Fixes problems with tagged-only ports ( #7795 )
...
SVN-Revision: 22856
2010-08-31 19:04:02 +00:00
0826570bc4
generic: rtl8366: allow use of VIDs 16-4095 if vlan4k is enabled
...
SVN-Revision: 22704
2010-08-18 16:00:39 +00:00
08c5588cd2
generic: rtl8366: add generic code to enable VLANs
...
SVN-Revision: 22703
2010-08-18 16:00:37 +00:00
77d6cd0feb
generic: rtl8366: add enable_vlan{,4k} to smi_ops
...
SVN-Revision: 22702
2010-08-18 16:00:34 +00:00
e01649c7cc
generic: fix LED control on the RTL8366 switches
...
* patch from #7713
SVN-Revision: 22656
2010-08-15 06:47:42 +00:00
f8c4bf89b9
rtl8366: re-enable learning by default, disabling it broke switching functionality. add a configuration option for dynamically enabling/disabling this feature. based on patch from #7637
...
SVN-Revision: 22545
2010-08-08 20:15:10 +00:00
bd6324190f
swconfig: cleanup of kernel drivers and interface - add some comments to a few data structures - add a switch_dev_ops data structure for attributes and callback to replace the stupid template memcpy - get rid of the switch_dev.priv pointer - using container_of() is better
...
SVN-Revision: 22476
2010-08-04 00:43:40 +00:00
bf1db57017
ip17xx: r21709 broke VLAN functionality on the IP175C switch, add back mdelay() to wait before reading back the phy state, fixes ethernet on the DIR-300 and possibly others
...
SVN-Revision: 22468
2010-08-03 03:04:34 +00:00
9445ce43a6
generic: rtl8366: add debugfs file to show PVIDs
...
SVN-Revision: 22206
2010-07-15 13:05:56 +00:00
9a92e1a32c
generic: rtl8366: make rtl8366_set_vlan static
...
SVN-Revision: 22205
2010-07-15 13:05:53 +00:00
48934bbd88
generic: rtl8366: add common rtl8366_sw_{get,set}_vlan_ports functions
...
SVN-Revision: 22204
2010-07-15 13:05:50 +00:00
d4e0b75dda
generic: rtl8366: add common rtl8366_sw_get_vlan_info
...
SVN-Revision: 22203
2010-07-15 13:05:47 +00:00
Felix Fietkau
Gabor Juhos
Jonas Gorski
John Crispin
Florian Fainelli
Jo-Philipp Wich