hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
22,848 Commits
5 Branches
29 Tags
202 MiB
Commit Graph

1786 Commits (379b8258f5210d996067473c2bed220ecb696d2b)

Author SHA1 Message Date
Felix Fietkau 53e0ba49b9 ar71xx: avoid __packed define in the unaligned access hack patch, make the ipv6 address struct also 2-byte-aligned/packed 
SVN-Revision: 35127
 2013-01-13 13:06:09 +00:00
Felix Fietkau 764520975c ar71xx: add more cpu feature overrides, slightly reduces kernel size 
SVN-Revision: 35125
 2013-01-13 11:33:48 +00:00
Felix Fietkau 310724c14d ar71xx: extend the unaligned access hacks to a few more places that showed up in the new kernel 
SVN-Revision: 35124
 2013-01-13 11:33:44 +00:00
Gabor Juhos eb2188c0e2 ar71xx: remove 3.6 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35114
 2013-01-12 12:25:38 +00:00
Gabor Juhos fe86bc9370 ar71xx: switch to 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35113
 2013-01-12 12:25:36 +00:00
Gabor Juhos ba4de984b9 ar71xx: disable PHY_SWAP and PHY_ADDR_SWAP bits on TL-WR703N/MR3020/MR3040/MR11U boards 
The PHY_SWAP and PHY_ADDR_SWAP bits are initialized
differently by different versions of the bootloader.
This leads to broken ethernet connection with OpenWrt
on some boards.

Turn both SWAP bits OFF on these boards to make it
consistent regardless of the bootloader used.

Based on a patch by Michel Stempin <michel.stempin@wanadoo.fr>.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35037
 2013-01-07 14:30:37 +00:00
Gabor Juhos 251e4608b0 ar71xx: add missing Makefile entry to the 74HC153 GPIO patch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35035
 2013-01-07 14:14:41 +00:00
Gabor Juhos e1965a1d1a ar71xx: register the NAND flash controller device on the AP135/136 boards 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34946
 2013-01-01 13:10:41 +00:00
Gabor Juhos 66efec6783 ar71xx: allow to register the NAND flash controller on the QCA955x 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34945
 2013-01-01 13:10:36 +00:00
Gabor Juhos 2c77e5d7b3 ar71xxx: allow to select ATH79_DEV_NFC for QCA955x 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34944
 2013-01-01 13:10:34 +00:00
Gabor Juhos d8446d65fe ar71xxx: allow to build the ar934x_nfc driver for QCA955x 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34943
 2013-01-01 13:10:29 +00:00
Gabor Juhos 93c322cacc ar71xx: fix NAND controller base for QCA955x SoCs 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34942
 2013-01-01 13:10:26 +00:00
Gabor Juhos b57cc9a538 ar71xx: fold AP135 patch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34941
 2013-01-01 13:10:22 +00:00
Gabor Juhos 87271e9f28 ar71xx: add support for 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34920
 2012-12-29 16:02:31 +00:00
Gabor Juhos a3a6e0f039 ar71xx: Build the AP135 images 
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34919
 2012-12-29 16:02:28 +00:00
Gabor Juhos dddf05bde2 ar71xx: Add userspace support for AP135 
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34918
 2012-12-29 16:02:27 +00:00
Gabor Juhos 1a379c5112 ar71xx: Add support for AP135 
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34917
 2012-12-29 16:02:24 +00:00
Gabor Juhos c6580f64b8 ar71xx: use a backported patch to fix AR933x UART baud rate calculation 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34915
 2012-12-29 13:52:38 +00:00
Felix Fietkau 348dc70c8c ar71xx: change the unaligned access hack to assume an alignment of 2 bytes, slightly improves performance and code size 
SVN-Revision: 34912
 2012-12-28 21:30:24 +00:00
Felix Fietkau 41a039f464 mips: use -mno-branch-likely for kernel and userspace, saves ~11k kernel size after lzma and ~12k squashfs size in the default configuration 
SVN-Revision: 34909
 2012-12-28 19:17:19 +00:00
Gabor Juhos f5b1cba606 ar71xx: build image for the AP136-020 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34886
 2012-12-26 09:50:37 +00:00
Gabor Juhos f3f05d86fe ar71xx: add user-space support for AP136-020 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34885
 2012-12-26 09:50:36 +00:00
Gabor Juhos ed1889db33 ar71xx: add kernel support for the AP136-020 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34884
 2012-12-26 09:50:34 +00:00
Gabor Juhos c887a7fe4e ar71xx: rename AP136 to AP136-010 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34883
 2012-12-26 09:50:31 +00:00
Gabor Juhos f8b4dfd172 ar71xx: dynamically set AR8327's PAD configuration on AP136 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34882
 2012-12-25 18:45:32 +00:00
Gabor Juhos 1dc2b6e8fa ar71xx: ag71xx: show PHY interface mode in dmesg 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34880
 2012-12-25 18:45:29 +00:00
Gabor Juhos 64d31e6c6b ar71xx: register the second ethernet interface on the AP136 
Also fix the default network configuration
according to the new setup.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34854
 2012-12-22 12:12:50 +00:00
Gabor Juhos 5dec87afef ar71xx: fix ethernet device registration for QCA9558 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34853
 2012-12-22 12:12:48 +00:00
Gabor Juhos 84a7051cef ar71xx: rename QCA9558 ETH_CFG bit defines 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34852
 2012-12-22 12:12:46 +00:00
Gabor Juhos 4085a5773d ar71xx: fixup allowed PHY interface types for QCA9558 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34851
 2012-12-22 12:12:44 +00:00
Gabor Juhos f01a786825 ar71xx: don't assign any MII bus device on QCA9558 by default 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34850
 2012-12-22 12:12:43 +00:00
Gabor Juhos 9edcd9d3a3 ar71xx: ag71xx: fix mii_bus_dev sanity check 
The mii_bus device is not required if phy_mask is zero.
The driver will use a fixed connection if it is not
specified.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34849
 2012-12-22 12:12:41 +00:00
Gabor Juhos ad0f03d250 ar71xx: ag71xx: don't start/stop built-in switch w/o mii_bus_dev 
Trying to do that causes a NULL pointer dereference:

CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 801d170c, ra == 801d18d4
Oops[#1]:
Cpu 0
$ 0   : 00000000 00000000 00000000 00000001
$ 4   : 00000000 802e6390 ffff8f45 00000001
$ 8   : 804b5360 ffffff80 802f93bc 00000000
$12   : 802f93e8 00000000 00000000 00000000
$16   : 8381aba0 8381aba0 00000000 00000000
$20   : 8295eff0 00000032 80000000 004101b8
$24   : 00000000 777265b0
$28   : 82936000 82937cf0 00420000 801d18d4
Hi    : 00000000
Lo    : 00000001
epc   : 801d170c ar7240sw_reset+0x1c/0x19c
    Tainted: G           O
ra    : 801d18d4 ag71xx_ar7240_start+0x28/0xc0
Status: 1100fc03    KERNEL EXL IE
Cause : 00800008
BadVA : 00000000
PrId  : 00019750 (MIPS 74Kc)
Modules linked in: ath79_wdt ohci_hcd ledtrig_usbdev ledtrig_netdev
nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp
 ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK
iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack
ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport
xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tab
les ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O)
ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80211(O) c
ompat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash
crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button
_hotplug(O)
Process netifd (pid: 677, threadinfo=82936000, task=82cbe140, tls=77803750)
Stack : ffffffff 80087900 00000001 82937d74 8381aba0 8381aba0 00000000 00000000
        8295eff0 801d18d4 8295eff0 801fa4a4 00420000 80092158 00000002 8381aba0
        8381a800 00000000 00000080 801cf900 8027e720 00000000 00000000 8009223c
        8381a800 8381a82c 8027e720 00000000 00000000 7f9d14f0 00420000 801ec08c
        8381a800 801ebfb0 33000000 82937e30 00000001 8381a800 00001003 801ec348
        ...
Call Trace:
[<801d170c>] ar7240sw_reset+0x1c/0x19c
[<801d18d4>] ag71xx_ar7240_start+0x28/0xc0
[<801cf900>] ag71xx_open+0x1d0/0x258
[<801ec08c>] __dev_open+0xcc/0x130
[<801ec348>] __dev_change_flags+0xc0/0x160
[<801ec490>] dev_change_flags+0x20/0x6c
[<801ec5c8>] dev_ifsioc+0xec/0x348
[<801ecdb8>] dev_ioctl+0x594/0x67c
[<800ec00c>] do_vfs_ioctl+0x598/0x5ec
[<800ec0b0>] sys_ioctl+0x50/0x90
[<8006a3c4>] stack_done+0x20/0x40
Code: afbf0024  afb40020  afb10014 <8c910000> 00809021  24100104 24130704  8e440000  02002821

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34848
 2012-12-22 12:12:40 +00:00
Gabor Juhos a0b31f97bb generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34846
 2012-12-22 12:12:35 +00:00
Gabor Juhos e108cb91c0 ar71xx: rename fix-ar933x-reset patch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34798
 2012-12-20 14:13:16 +00:00
Mirko Vogt e34a4e0c7b Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh) 
SVN-Revision: 34793
 2012-12-19 16:07:50 +00:00
Gabor Juhos 5f82aa4d15 ar71xx: merge machine patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34783
 2012-12-19 08:50:45 +00:00
Gabor Juhos cf99770800 ar71xx: build image for the TL-MR3220 v2 
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/

[juhosg: reorder MR3220 MultiProfile entry]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34782
 2012-12-19 08:50:44 +00:00
Gabor Juhos b1b7aa674e ar71xx: add user-space support for the TL-MR3220 v2 
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/

[juhosg: add uci-defaults/network support]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34780
 2012-12-19 08:50:41 +00:00
Gabor Juhos 0767605d17 ar71xx: add kernel support for the TL-MR3220 v2 
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/

[juhosg:
 - remove custom LED and button arrays
 - use separate machine specific patch
 - update Kconfig]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34779
 2012-12-19 08:50:35 +00:00
Gabor Juhos 149534f3ed ar71xx: image: add OpenMesh profile 
It allows to build firmware images for all OpenMesh
products in one step.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34761
 2012-12-18 15:16:05 +00:00
Gabor Juhos 44b9898251 kernel: update linux 3.6 to 3.6.11 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34748
 2012-12-18 14:41:16 +00:00
Gabor Juhos fc0da6852e ar71xx: nuke 3.3 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34743
 2012-12-17 22:28:09 +00:00
Gabor Juhos 61d715505c ar71xx: add profile and build image for UniFi AP Pro 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34730
 2012-12-17 12:28:21 +00:00
Gabor Juhos abbd18776e ar71xx: add user-space support for UniFi AP Pro 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34728
 2012-12-17 12:28:11 +00:00
Gabor Juhos ff3f28265f ar71xx: add kernel support for the UniFi AP Pro 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34727
 2012-12-17 12:28:02 +00:00
Gabor Juhos 2e2c88b625 ar71xx: reorder some patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34674
 2012-12-14 07:16:56 +00:00
Gabor Juhos 34411a0cbd ar71xx: merge unifi outdoor patch into the ubnt-xm one 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34673
 2012-12-14 07:16:50 +00:00
Gabor Juhos d085aad288 ar71xx: add profile and build initramfs image for the WNDR4300 
It is not yet possible to use the default squasfsh/jffs2 images
on NAND flashes, so only initramfs image is supported for now.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34650
 2012-12-12 16:49:52 +00:00
Gabor Juhos dcdfcb75f0 ar71xx: add user-space support for the NETGEAR WNDR4300 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34649
 2012-12-12 16:49:51 +00:00