bbd4d4c8b8
ar71xx: ethernet: reduce tx dma ring size further to improve cache footprint
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37765
2013-08-13 10:35:10 +00:00
58e049ea80
ar71xx: ethernet: reduce tx and rx DMA ring size to improve cache footprint
...
256 entries is a bit excessive, even for gigabit speeds
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37762
2013-08-12 17:26:03 +00:00
f43b4ea962
ar71xx: ethernet: cache skb->len in the tx function to avoid accessing it again in completion
...
Improves ethernet performance, especially during bridging
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37761
2013-08-12 17:26:00 +00:00
53c3b2a193
ar71xx: fix typo
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37759
2013-08-12 12:41:53 +00:00
f18fd5512e
ar71xx: ethernet: skip calls to netdev_completed_queue and netif_wake_queue if no tx cleanup was done
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37758
2013-08-12 11:44:35 +00:00
81cfb9e5ed
ar71xx: ethernet: do not update the unused dev->last_rx field
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37757
2013-08-12 11:44:31 +00:00
104ff48e25
ar71xx: add missing return statement in ethernet mtu change op
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37756
2013-08-12 11:44:28 +00:00
7b05fe59a4
ar71xx: allow mtu > 1500 based on the configured tx/rx mtu register value
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37748
2013-08-10 15:31:38 +00:00
f835cb6cc4
ar71xx: remove duplicate dir505 entry from board detection code
...
https://dev.openwrt.org/ticket/14006
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37723
2013-08-06 14:12:02 +00:00
267810f73a
ar71xx: add usb modules to dir 505 profile
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37706
2013-08-05 11:08:30 +00:00
553a469728
ar71xx: add support for dir 505 a1
...
this patch is based on ...
-> https://forum.openwrt.org/viewtopic.php?pid=179902#p179902
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37703
2013-08-05 10:41:48 +00:00
99a12119ca
ar71xx: fix tl-wa901nd buttons code
...
This patch fixes the code of the buttons for TP-Link WA901ND.
Signed-off-by: Rocco Folino <lordzen@autistici.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37696
2013-08-05 09:09:39 +00:00
ccec78beaa
ar71xx: ubnt unifi outdoor register gpio button
...
This patch register the gpio buttons for the Ubiquiti UniFi Outdoor.
Signed-off-by: Rocco Folino <lordzen@autistici.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37695
2013-08-05 09:09:37 +00:00
8f04792531
kernel: update to linux 3.10.4, refresh patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37617
2013-07-29 22:42:22 +00:00
73c4d73d6d
build: unify target independent optimization options
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37600
2013-07-29 09:38:29 +00:00
65584ed54f
ar71xx: add profile and build image for the WNR612 v2 board
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3876/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37577
2013-07-28 10:23:38 +00:00
41d136f2c8
ar71xx: add user-space support for the WNR612 v2 board
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3876/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37576
2013-07-28 10:23:37 +00:00
6d8163505e
ar71xx: add kernel support for the Netgear WNR612 v2 board
...
Netgear WNR612 v2:
- cpu Atheros AR7240 (Python) @400MHz
- flash 4MB
- ram 32MB
- ethernet 10/100: 1xwan + 2xlan (only two)
- radio AR9285
[juhosg: use a separate kernel patch]
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3876/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37575
2013-07-28 10:23:36 +00:00
ede1587ed8
ar71xx: add profile and build image for the TL-WR710N board
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3873/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37574
2013-07-28 10:23:34 +00:00
5f5257e234
ar71xx: add user-space support for the TL-WR710N board
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3873/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37573
2013-07-28 10:23:33 +00:00
c5029c2ebf
ar71xx: add kernel support for the TP-LINK TL-WR710N v1 board
...
Small router sold in EU: AR9330@400MHz, 1x USB2.0,
2x ethernet, 8MB flash, 32MB ram, one led, one button.
See: http://galeria.tech-blog.pl/TP-Link_TL-WR710N-EU/
[juhosg: use a separate kernel patch]
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3873/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37572
2013-07-28 10:23:32 +00:00
af1dd57a37
ar71xx: build image for the MERCURY MW4530R board
...
Mercury MW4530R is a TP-Link TL-WDR4310 clone but
with a much lower price tag (~ $40). This patch
is tested to work at trunk r37525.
Signed-off-by: Leon Xu <ylxu72@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3856/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37571
2013-07-28 10:23:31 +00:00
8b6f392b72
ar71xx: add model detection for the MERCURY MW4530R board
...
Mercury MW4530R is a TP-Link TL-WDR4310 clone but
with a much lower price tag (~ $40). This patch
is tested to work at trunk r37525.
Signed-off-by: Leon Xu <ylxu72@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3856/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37570
2013-07-28 10:23:29 +00:00
b49dc036e8
ar71xx: TEW632BRP has buttons 'active low', fix board config
...
Looks like trunk@37090 has changed the logic that determines
if router's button was pressed. This resulted in TEW632BRP
always booting into failsafe mode because it detected pressed
button (which was not pressed).
Measure with voltmeter has shown that buttons on this router
are actually active-low. This patch reflects this fact in
board configuration and fixes 'load info failsafe mode' issue.
Note: it looks like Trendnet TEW632BRP and a close relative
to TEW-652BRP V1.0 and D-Link DIR-615C1, so same problem may
exist on those routers as well. This patch doesn't affect
routers other than 632BRP and unfortunately I do not have
hardware to test this issue with other routers.
This patch fixes #13893 and is tested on actuall Trendnet
TEW632BRP.
Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37569
2013-07-28 10:23:22 +00:00
f093cda481
ar71xx: add profile and fixup image generation for the TL-MR10U board
...
Create a separate board profile and update the profile
name in image/makefile. Also use the correct machtype
string in kernel command line.
Based on andelf's patch:
http://andelf.diandian.com/post/2013-05-22/40050677370
Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37550
2013-07-26 07:32:01 +00:00
f4d5ecdb9f
ar71xx: add user-space support for the TL-MR10U board
...
Based on andelf's patch:
http://andelf.diandian.com/post/2013-05-22/40050677370
Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37548
2013-07-26 07:31:59 +00:00
ec7fe3fab7
ar71xx: add kernel support for the TL-MR10U board
...
Based on andelf's patch:
http://andelf.diandian.com/post/2013-05-22/40050677370
[juhosg: extend WR703N code to handle the TL-MR10U
instead of adding a separate mach-tl-mr10u file]]
Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37547
2013-07-26 07:31:57 +00:00
e9688455f6
kernel: update 3.10 to 3.10.3
...
Also refresh 3.10 patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37546
2013-07-26 07:19:58 +00:00
ea55883a51
ar71xx: fix switch port map for the Archer C7
...
The correct port number for the WAN port is 1.
Update the VLAN port maps to reflect that.
https://forum.openwrt.org/viewtopic.php?pid=203755#p203755
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37507
2013-07-22 16:02:13 +00:00
ef944dcb85
kernel: update 3.10 to 3.10.2
...
Also refresh 3.10 patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37502
2013-07-22 15:31:13 +00:00
205f7248ae
Revert "ar71xx: override cpu_has_mmips feature"
...
This reverts r37477. A generic patch is used to fix
this globally, so revert the ar71xx specific change.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37480
2013-07-20 10:14:08 +00:00
2d8fd8b58c
ar71xx: override cpu_has_mmips feature
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37477
2013-07-20 09:40:32 +00:00
8a6575cf53
ar71xx: use mtd_get_part_size helper
...
Drop the local get_mtd_part_size implementation and use
the equivalent function provided by lib/functions.sh.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37476
2013-07-20 09:26:57 +00:00
4a9d4271d0
ar71xx: build image for the TP-LINK TL-WR941N v6 board
...
TL-WR941N v6 use almost same IC as WDR3500.
[juhosg: change subject, and change fw layout from 4M to 4Mlzma]
Patchwork: http://patchwork.openwrt.org/patch/3719/
Signed-off-by: ShuYu Wang <andelf@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37471
2013-07-20 08:54:45 +00:00
b1b4e7db13
kernel: move CONFIG_NET_IP_TUNNEL to generic
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37465
2013-07-19 22:58:01 +00:00
8b92613b6c
ar71xx: fix uimage split for ew-dorin
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37350
2013-07-15 16:59:58 +00:00
c77eca3108
ar71xx: refresh patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37349
2013-07-15 15:12:41 +00:00
9e3eee974b
ar71xx: remove patches for 3.8 (leftover after r37315)
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37324
2013-07-14 22:57:47 +00:00
3d15bc6fb2
ar71xx: fix maximum watchdog timeout
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37315
2013-07-14 18:01:09 +00:00
eb0a44917e
ar71xx: update to 3.10.1
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37310
2013-07-14 17:29:56 +00:00
936683b2de
ar71xx: use uimage split for WHR-HP-G300N
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37303
2013-07-14 14:06:01 +00:00
342946d858
ar71xx: use uimage split for dlrtdev
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37302
2013-07-14 14:05:57 +00:00
594797cdd5
ar71xx: use uimage split for Allnet devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37301
2013-07-14 14:05:53 +00:00
e5b7a20bea
ar71xx: use uimage split for Cameo devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37300
2013-07-14 14:05:50 +00:00
4fc17e4d08
ar71xx: use uimage split for DIR-825B1
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37299
2013-07-14 14:05:46 +00:00
c263993197
ar71xx: use uimage split for Embedded Wireless Dorin
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37298
2013-07-14 14:05:42 +00:00
083b0a06a3
ar71xx: use uimage split for Ubiquiti XM devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37297
2013-07-14 14:05:39 +00:00
6702955857
ar71xx: increase kernel size for wndr3700 based devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37296
2013-07-14 14:05:35 +00:00
25d910a78f
ar71xx: use uimage split for WZR-HP-G300NH2
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37295
2013-07-14 14:05:31 +00:00
6bff456212
ar71xx: enable uimage split for wzr-hp-ag300h/wzr-600dhp
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37294
2013-07-14 14:05:27 +00:00
Felix Fietkau
John Crispin
Gabor Juhos
Jonas Gorski
Luka Perkov