289c41604f
bcm963xx: add missing trailing zero to load address
...
The load address for BCM963xx is 0x80010000, not 0xf8001000 as in the current
sources. I think this is just a typo, so this patch fixes it (tested on 96345).
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11177
2008-05-18 17:31:11 +00:00
17d20bb016
bcm963xx: flashmap support
...
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11176
2008-05-18 17:31:02 +00:00
da18b98cff
bcm963xx: serial port support
...
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11175
2008-05-18 17:30:49 +00:00
97b85443eb
bcm963xx: board support
...
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11174
2008-05-18 17:30:39 +00:00
f94d5eafc9
bcm963xx: add 2.6.25 configuration file
...
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11173
2008-05-18 17:30:30 +00:00
8e7ff7a673
bcm963xx: use the 2.6.25.1 kernel
...
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11172
2008-05-18 17:30:16 +00:00
2dfabe3991
bcm963xx: image generation using image tagger
...
This adds CFE tagged image generation in the BCM963xx target image Makefile.
It has to generate its own LZMA compressed kernel because CFE is a LZMA nazi.
It also seems that the Broadcom image tagger as well as CFE use AdvanceCOMP,
which is based on a slightly older LZMA SDK. Anyways, some of the code is
GPL, some of it is LGPL, so it might be that Broadcom owes some sources.
Also, LZMA has a bug which causes it to generate different output when you
are using stdin / stdout compared to plain files. I've just worked around
the issue by using plain files.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11171
2008-05-18 17:30:04 +00:00
46b4413fbb
bcm963xx: fix load address / kernel entry
...
Current kernels have the same kernel entry as load address, so just set them
like this. Also, the BCM963xx uses 0x80010000 as its load address, so use this
too.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11169
2008-05-18 17:29:39 +00:00
e3a42b23c6
enable proper PCI & USB support detection at config-time by disabling CONFIG_PCI & CONFIG_USB entries in generic/config and enabling them on targets where appropriate
...
SVN-Revision: 11097
2008-05-09 17:08:51 +00:00
68943e35c2
upgrade to 2.6.24.5
...
SVN-Revision: 10959
2008-04-28 10:23:36 +00:00
c6fe45ed55
properly disable CONFIG_CRYPTO_HW
...
SVN-Revision: 10952
2008-04-27 12:31:50 +00:00
03f917f26c
Delete config-default file and resync kernel configuration for brcm63xx
...
SVN-Revision: 10790
2008-04-11 14:22:41 +00:00
62240465c4
brcm63xx image generation cleanups ( #3169 )
...
SVN-Revision: 10703
2008-04-01 21:10:47 +00:00
ebf4eb11e9
Upgrade brcm63xx to 2.6.24
...
SVN-Revision: 10455
2008-02-13 17:31:17 +00:00
0a72d14e40
resync kernel config
...
SVN-Revision: 10444
2008-02-11 15:28:45 +00:00
3a0e58b2e1
upgrade & standardize kernel versions
...
SVN-Revision: 10443
2008-02-11 10:50:40 +00:00
3f7af01bb0
fix initramfs
...
SVN-Revision: 10080
2008-01-01 21:38:06 +00:00
1bca0cc517
make the image filenames a bit shorter
...
SVN-Revision: 9533
2007-11-10 23:08:11 +00:00
5f0272d618
move crypto support to a seperate crypto.mk file, split modules into multiple packages and adjust dependencies, sync crypto options in kconfigs.
...
SVN-Revision: 8980
2007-09-23 15:12:12 +00:00
fec4d9ee3c
add missing 2.6 conntrack/nat helpers, add 2.6 conntrack/nat helper for RTSP ( closes : #2297 , thanks to aorlinsk), sync 2.4 / 2.6 kconfigs.
...
SVN-Revision: 8955
2007-09-22 18:37:24 +00:00
236d7e62ca
clean up jffs2 config options
...
SVN-Revision: 8848
2007-09-19 20:58:16 +00:00
87a88cebc7
adapt profiles for subtarget changes
...
SVN-Revision: 8695
2007-09-08 20:04:43 +00:00
a9d683ca91
major target cleanup. it is now possible to have subtargets that can override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets
...
SVN-Revision: 8694
2007-09-08 19:55:42 +00:00
56231056ea
strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.
...
SVN-Revision: 8653
2007-09-06 16:27:37 +00:00
Felix Fietkau
Nicolas Thill
Imre Kaloz
Florian Fainelli
Gabor Juhos