Commit Graph

355 Commits (338b698fb6f8f1fb38b36d10dfe087c7701a2d5e)

Author SHA1 Message Date
Vasilis Tsiligiannis b4f51343c6 Make gzipping of images configurable via menuconfig
SVN-Revision: 30587
2012-02-16 17:53:57 +00:00
Jo-Philipp Wich f35c4a3266 8139cp: backport patches to make driver stable again
List of patches that Jo-Philipp groveled out of git.

Redux: defuzzed.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 30366
2012-02-07 21:56:51 +00:00
Vasilis Tsiligiannis 834be6c1fe alix2, geos: Adjust CFLAGS
Clone of CFLAGS change from r30013 into Geos and Alix platforms.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 30353
2012-02-07 13:00:47 +00:00
Vasilis Tsiligiannis 42ec97097e generic: Enable HPET, HID and AT keyboard support
SVN-Revision: 30309
2012-02-05 17:56:04 +00:00
Vasilis Tsiligiannis b5ff8b85d6 generic: Add missing and remove unused config symbols
SVN-Revision: 30133
2012-02-04 20:45:17 +00:00
Jonas Gorski d6afe712ab x86: make alix platform patch apply to 3.3
Based on a patch from Philip Prindeville.

While at it, also refresh the patches.

SVN-Revision: 30025
2012-02-03 20:17:00 +00:00
Jo-Philipp Wich c433bfb571 disable additional PATA drivers in global 3.2 and 3.3 config, remove redundant symbols from alix2 config
SVN-Revision: 30024
2012-02-03 19:47:55 +00:00
Jo-Philipp Wich 40867f1b68 x86: trivial -- add missing CONFIG_GEOS symbol to top-level So that builds don't stall in x86 prompting for this symbol. [From Philip Prindeville, via http://patchwork.openwrt.org/patch/1828/]
SVN-Revision: 30023
2012-02-03 19:21:41 +00:00
Jo-Philipp Wich 79a3fdb9da geos: backport driver from linux-next to 3.2 and 3.3 The Geos driver is in linux-next and will be out in 3.4. It builds fine against 3.2.2 and 3.3-rc2. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 30022
2012-02-03 18:16:27 +00:00
Jo-Philipp Wich 25d605ab0e net5501: backport drivers from linux-next Backport net5501 platform driver from 3.4. Remove vestiges of old (pre-2.6.30) leds-net5501.c driver. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 30021
2012-02-03 18:14:02 +00:00
Jo-Philipp Wich 7a36f3d2ff x86: move additional oddball PATA drivers These should only be enabled in the generic image, as they bloat all of the other targets. Also add symbols for NET5501, ALIX, and GEOS which were added backported to 3.2 and 3.3. Restore PC speaker to Geos target. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 30019
2012-02-03 18:02:57 +00:00
Jo-Philipp Wich d13c3cd073 net5501: adjust CFLAGS and package selection (#10893) This patches the CFLAGS for Geode LX CPUs for 4.3 and new GGC versions. This creates more compatible code and allowed me to boot my system first time with no troubles. Also, the missing kmod is added in.
SVN-Revision: 30013
2012-02-03 14:19:29 +00:00
Jonas Gorski f99bf6517c x86: add 3.3 generic symbols
Copy x86/config-3.2 to x86/config-3.3 and add additional symbols (for 3.3-rc2).

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 30002
2012-02-02 21:01:59 +00:00
Jo-Philipp Wich b6be49429b alix2: backport platform driver updates from linux-next Add patches to x86/patches-3.2 and x86/patches-3.3 (update will appear in 3.4). [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1817/]
SVN-Revision: 30001
2012-02-02 19:26:32 +00:00
Jo-Philipp Wich 7a9e4ffe8e alix2, geos, net5501: remove kmod-ledtrig-netfilter, its not used by any standard system facility
SVN-Revision: 30000
2012-02-02 19:11:52 +00:00
Jo-Philipp Wich bf8bb9b661 alix2, goes, net5501: clean up default packages Remove packages which are dependencies of other packages Remove packages which are part of the default package list Remove DSL specific packages from net5501 Remove bridge package, we use the busybox applet Replace hostapd with wpad
SVN-Revision: 29999
2012-02-02 19:06:22 +00:00
Jo-Philipp Wich 047ba1e12e alix2, net5501: bump both subtargets to Linux 3.2.2 to align with the rest
SVN-Revision: 29998
2012-02-02 19:00:40 +00:00
Jo-Philipp Wich 1ae5715f2e geos: add missing files from previous commit
SVN-Revision: 29997
2012-02-02 18:59:51 +00:00
Jo-Philipp Wich a1258ccaba geos: backport Geos driver from linux-next Backport of linux-next driver. Driver adds support for LEDS and S/W button. Add hotplug script for button actions. Add Openwrt system config for LEDS triggers. Add updated kernel .config for 3.2 symbols. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1816/]
SVN-Revision: 29996
2012-02-02 18:58:20 +00:00
Jo-Philipp Wich 415a375eaa geos: cleanup GPIO driver name In 3.1, the old drivers/char/ entry for the CS5535 GPIO driver went obsolete. Make Geos use a recent kernel and remove this ambiguity. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1815/]
SVN-Revision: 29995
2012-02-02 18:44:35 +00:00
Jo-Philipp Wich 5523eca4e5 net5501: correct net5501 h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Designate eth0 as wan interface, and bridge eth1/eth2/eth3. Add heartbeat LED trigger. Use correct CS5535 GPIO driver. Use correct USB drivers (OHCI not UHCI). Add MSR and HW clock support. Add GPIO mask definition. Add correct SATA drivers. Add LED triggers. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1802/]
SVN-Revision: 29994
2012-02-02 18:41:10 +00:00
Jo-Philipp Wich 3310df6b52 alix2: correct h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Drop obsolete CS5535 GPIO driver.
[Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1804/]

SVN-Revision: 29981
2012-02-01 15:31:23 +00:00
Jo-Philipp Wich 55b5e15bff create a config-3.2 for upcoming changes, rebase config-default to 2.6.39
SVN-Revision: 29953
2012-01-30 02:13:37 +00:00
Jo-Philipp Wich 2fc3fe1d09 Make the grub timeout configurable on x86 targets
Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>

SVN-Revision: 29786
2012-01-19 01:14:45 +00:00
Jo-Philipp Wich 095f7f2da3 x86/config-3.2: add linux-3.2 symbols for x86
The following symbols are missing for x86, in sorted order.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 29783
2012-01-19 00:31:39 +00:00
Jo-Philipp Wich be49daffc8 base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli
SVN-Revision: 28933
2011-11-10 12:16:41 +00:00
Jo-Philipp Wich d6f02b62d4 add timeserver config to target specific system configs as well
SVN-Revision: 28750
2011-11-04 12:53:35 +00:00
Felix Fietkau b17bfe4f68 x86: disable crashlog, ioremap of RAM does not work properly here
SVN-Revision: 28599
2011-10-26 11:49:25 +00:00
Nicolas Thill b0d9bccafc x86: allow VDI & VMDK images for all subtargets (closes: #10255)
SVN-Revision: 28518
2011-10-22 13:09:15 +00:00
Daniel Dickinson c0a625ffbf Add patch for linux-3.0 as well.
Fix typo from previous submission with input-keys-polled.
Philip Prindeville - 2011-10-03 01:44:55

SVN-Revision: 28356
2011-10-03 03:09:20 +00:00
Daniel Dickinson 7e372b6dcf New x86 platform specific symbol needed for 3.1-rc3. 2011-10-03 03:06:29 +00:00
Daniel Dickinson 541aa8e38e A lot of these options get set automatically when Geode is selected.
Don't make the config more complicated than it needs to be.
Philip Prindeville - 2011-08-29 03:15:27

SVN-Revision: 28353
2011-10-03 03:02:42 +00:00
Jo-Philipp Wich ba46c7b3c6 Xen DomU: make sure kernel is gzip compressed, pygrub cannot handle xz
SVN-Revision: 28197
2011-09-08 22:18:26 +00:00
Florian Fainelli cbd28ad0ec bump to 2.6.39.4
Since linux gets developed on x86 more than all other hardware,
hardly makes sense to have our default x86 version be trailing
by over a year.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 28082
2011-08-25 09:35:51 +00:00
Florian Fainelli d2652dee9d update alix2 platform driver
Add support for Ed Wildgoose's alix platform driver plus my
enhancement to add GPIO soft button support.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 28081
2011-08-25 09:35:45 +00:00
Daniel Dickinson 7ef004a144 Add packages that will be relant as "There's a new Alix platform driver hitting linux-next upstream. Get ready for it in 2.6.39.4 and 3.0.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>"

SVN-Revision: 27929
2011-08-08 02:33:18 +00:00
Felix Fietkau 4da138d899 x86/alix2: include WAN interface by default
Include WAN interface by default, instead of putting both ports in the LAN bridge.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27787
2011-07-26 16:37:48 +00:00
Felix Fietkau 41db64f8e0 x86/alix2: fix typo in target makefile
Cut and paste cruft from borrowing from Geos platform.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27786
2011-07-26 16:37:44 +00:00
Hauke Mehrtens 80956276a7 x86: add missing config symbols
This adds some config symbols for kernel 3.0.

Thank you realopty for the patch.

This is from #9719.

SVN-Revision: 27775
2011-07-25 21:21:01 +00:00
Imre Kaloz f0f10fa599 add missing symbols for generic and x86 on 3.0, based on Philip Prindeville's patch
SVN-Revision: 27762
2011-07-24 22:04:08 +00:00
Felix Fietkau b5e3f6cd81 x86: 2.6.39 requires additional symbol
Sysfs support for DMI BIOS was added in 2.6.39.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27749
2011-07-24 09:41:07 +00:00
Felix Fietkau 6d3bddb056 geos: include pppstats and pppdump in default packaging
As the Geos box includes an ADSL modem that's targeted towards PPPoE, PPPoA, and bridged utilization, including these useful tools allows for easier configuration and troubleshooting.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27743
2011-07-24 08:41:58 +00:00
John Crispin 2975f0aaf1 alix2: add/subtract features as needed
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27411
2011-07-03 17:39:24 +00:00
Daniel Dickinson 88dcf8629d The Geode CS5535 and CS5536 companion chips are backward compatible with the SCx200 I2C drivers.
Include this on Geos.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27368
2011-07-03 02:59:00 +00:00
Jo-Philipp Wich 2c6bd71767 remove remaining uci-defaults
SVN-Revision: 27291
2011-06-27 01:42:31 +00:00
Florian Fainelli 9f63b7326f geos: deprecate uci-defaults files
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 27287
2011-06-25 22:05:10 +00:00
Florian Fainelli 1f6047496e alix2: add config files for bridging
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 27286
2011-06-25 22:05:05 +00:00
Jo-Philipp Wich 70fb318a90 Restrict Soekris specific base-files handling to Soekris profiles, based on patch by Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27241
2011-06-19 23:05:21 +00:00
Felix Fietkau 9567b93e5c x86: add additional companion chip drivers to alix2 and geos
Add the MFGPT high precision timers, and integration into the schedule (clock events).

Use OHCI, not UHCI usb module.

Remove VIA SATA driver from Alix2... that was accidentally cloned from net5501 platform.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27038
2011-05-31 16:57:05 +00:00
Felix Fietkau 68af223efe x86: remove pata-amd driver from generic x86 images, add addition cs553x modules
The pata-cs5535/pata-cs5536 driver is actually fairly rare: it only gets used on embedded platforms. Therefore, we remove it from the generic x86 configuration.

Also, add definitions for other useful geode modules (high-res timers, MFGPT timers, etc).

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27037
2011-05-31 16:57:01 +00:00
Daniel Dickinson f2c86a3835 Simple typo for kmod- prefix in alix2 target makefile.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 26945
2011-05-19 04:29:40 +00:00
John Crispin dfc19a34b4 * adds support for Artec Thincan
Signed-of-By: Lauri Võsandi <lauri.vosandi@gmail.com>

SVN-Revision: 26919
2011-05-17 10:35:14 +00:00
Daniel Dickinson 09e0d10010 Removed Alix.mk profile which was accidently left as an empty file applying the patch during r26879 and r26880.
SVN-Revision: 26882
2011-05-13 07:23:11 +00:00
Daniel Dickinson 8d66bf7e72 Add missed files from previous commit: This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's.
Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.

GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)

GPIO 24 : Soft switch 1

No kernel version bump.  Added i2c-scx200-acb for lm-sensors support.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 26880
2011-05-13 06:08:49 +00:00
Daniel Dickinson 937362f270 This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's.
Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.

GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)

GPIO 24 : Soft switch 1

No kernel version bump.  Added i2c-scx200-acb for lm-sensors support.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 26879
2011-05-13 06:06:42 +00:00
Jo-Philipp Wich ae5435adc9 geos: remove unneeded modules The via-sata and gpio-nsc modules are both unneeded on the Geos platform.
SVN-Revision: 26811
2011-05-03 21:18:12 +00:00
Felix Fietkau ae51f1972f x86: remove 2.6.35 patches
SVN-Revision: 26710
2011-04-17 18:39:50 +00:00
Daniel Dickinson ff1bc5c29d x86: missing kernel symbols
Please include these two missing kernel CONFIG_ symbols.

SVN-Revision: 26679
2011-04-15 04:56:49 +00:00
Daniel Dickinson 4021469e4a geos: Add PC speaker to kernel definitions
Add the PC speaker back to the Geos platform.

Add DMI support in BIOS.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 26678
2011-04-15 04:51:05 +00:00
Jo-Philipp Wich 76bfcee5ea gzip jffs2 images Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>
SVN-Revision: 26625
2011-04-12 20:48:47 +00:00
Jo-Philipp Wich d1f053d7ef Enable padding of jffs2 images to user specified filesystem size Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>
SVN-Revision: 26624
2011-04-12 20:46:34 +00:00
Jo-Philipp Wich 1340b0b98e Bump kernel version to 2.6.37.6
SVN-Revision: 26525
2011-04-07 21:54:29 +00:00
Felix Fietkau e00dcbc593 x86/geos: redux of cs5535 version
The previous technique didn't work with "make defconfig" correctly.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 26458
2011-04-03 23:30:26 +00:00
Daniel Dickinson eb502bf450 We $(PLATFORM_SUBDIR)/target.mk gets included, include/kernel-version.mk hasn't yet been included... therefore KERNEL_PATCHVER hasn't yet been defined.
Ergo, we need to use a deferred definition of GEOS_GPIO (and can't use ifeq/endif).

Signed-off-by: Philip Prindeville <philipp@openwrt.org

SVN-Revision: 26397
2011-04-02 02:02:24 +00:00
Florian Fainelli ad9945105b geos: support cpu MSR register and flashrom for coreboot upgrades
The early versions of the platform shipped with coreboot 3.0, which had some issues rebooting correctly the first time.

Allow the user to upgrade his BIOS from Linux.

Signed-of-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 26344
2011-03-28 21:31:02 +00:00
Travis Kemen 99c3236182 The Geos target (and probably others, like net5501) need to grab the new cs5535 gpio driver.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 26330
2011-03-28 01:18:58 +00:00
Imre Kaloz b8430e7427 update to 2.6.32.33 and 2.6.37.4
SVN-Revision: 26226
2011-03-18 13:25:32 +00:00
Hauke Mehrtens b78210955c kernel: update to kernel version 2.6.32.32
SVN-Revision: 26124
2011-03-13 17:12:20 +00:00
Florian Fainelli 29fd37780b switch to newer CS5535 GPIO driver, patch from Philip Prindeville
SVN-Revision: 25631
2011-02-20 19:59:29 +00:00
Florian Fainelli 8d7ca65dab add two solos-releated patches from Philip Prindeville
SVN-Revision: 25630
2011-02-20 19:59:25 +00:00
Florian Fainelli d3c2b87213 update to 2.6.32.29
SVN-Revision: 25583
2011-02-19 12:44:23 +00:00
Jo-Philipp Wich 49057274ff geos: preconfig fix
SVN-Revision: 25255
2011-01-30 21:07:39 +00:00
Felix Fietkau 5571acdbd0 x86/soekris: Add defconfig for soekris net4801 and net4826
Add default config file for net4801 and 4826 and initial script
to copy config file like it is done for other platforms.

Patch from: kentarou matsuyama <matsuyama@thinktube.com>

SVN-Revision: 25103
2011-01-26 11:33:46 +00:00
Felix Fietkau 3d9d5cee8a x86/soekris: Add script to detect soekris model
Add script to detect soekris board of net4801 and net4826.

Patch from: kentarou matsuyama <matsuyama@thinktube.com>

SVN-Revision: 25102
2011-01-26 11:33:42 +00:00
Imre Kaloz 2821101c92 platform specific patches don't belong here - take #2
SVN-Revision: 25085
2011-01-24 12:11:25 +00:00
John Crispin 275c33c6f8 * Make sure that Geos baud-rate defaults correctly Changeset 23414 somehow got reordered. The unconditional default trumps later settings.
contributed by Philip Prindeville

SVN-Revision: 25068
2011-01-22 23:10:51 +00:00
John Crispin 079ba5ac14 * adds sane default uci environment * adds sane default package selection
contributed by Philip Prindeville

SVN-Revision: 25065
2011-01-22 22:43:51 +00:00
Daniel Dickinson cc7e8eabb1 Missing symbols for CONFIG_xxx .. Thanks Philip Prindeville
SVN-Revision: 25031
2011-01-17 05:49:02 +00:00
Hauke Mehrtens b8ab3d34eb kernel: update kernel versions Update kernel 2.6.32.26 to 2.6.32.27 Update kenrel 2.6.36.1 to 2.6.36.2
SVN-Revision: 24486
2010-12-11 16:07:21 +00:00
Imre Kaloz ead8ab8403 update to the latest stable kernels
SVN-Revision: 24136
2010-11-24 18:50:11 +00:00
Imre Kaloz 809943774d move x86 back to .32 for now
SVN-Revision: 24085
2010-11-22 12:58:31 +00:00
Imre Kaloz 4052849677 switch from ext2 to ext4 (w/o) journaling
SVN-Revision: 24084
2010-11-22 12:12:39 +00:00
Imre Kaloz cca7066e73 additional Kconfig options for newer kernels
SVN-Revision: 24081
2010-11-22 11:34:45 +00:00
Imre Kaloz 5406906be1 we don't need microcode updates
SVN-Revision: 24080
2010-11-22 11:33:25 +00:00
Felix Fietkau 9bfd20a160 x86: add missing l1 cache shift change
SVN-Revision: 24072
2010-11-21 23:27:25 +00:00
Felix Fietkau 1a9b885c74 x86: turn off CONFIG_X86_GENERIC for geos and net5501
CONFIG_X86_GENERIC obscures CONFIG_MGEODE_LX, etc. and causes it to use wrong cache-line size.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 24071
2010-11-21 22:56:33 +00:00
Felix Fietkau ba5296268c x86: refresh config, enable pci express support
SVN-Revision: 24026
2010-11-17 22:41:17 +00:00
Imre Kaloz 2f2442f323 x86 kernels target bzImage by default
SVN-Revision: 23926
2010-11-08 09:44:33 +00:00
Florian Fainelli 18fd669ef2 [x86 net5501: make kmod-leds-net5501 work
Fixes dependencies, and properly labels the module as GPL (thanks, Felix!).

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 23922
2010-11-08 07:31:40 +00:00
Florian Fainelli b6e9f1dfe0 make targets provide their KERNELNAME
SVN-Revision: 23919
2010-11-08 07:31:25 +00:00
Florian Fainelli 60c6d33e00 net5501: Add features to net5501 and remove HID support (unneeded)
Since the net5501 doesn't have a VGA port, it doesn't need HID support either --
 all console access will be over a serial port.

Also add FEATURES to it as well.

Signed-of-by: Philip Prindeville <philip@redfish-solutions.com>

SVN-Revision: 23916
2010-11-07 20:37:40 +00:00
Imre Kaloz 0a5da348d1 update kernels to 2.6.32.25 and 2.6.35.8
SVN-Revision: 23851
2010-11-04 09:01:08 +00:00
Florian Fainelli b013e4eec4 add kmod-leds-net5501
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 23729
2010-10-30 22:35:59 +00:00
Florian Fainelli eace922392 resync config-default, enable gpio support
SVN-Revision: 23727
2010-10-30 22:35:50 +00:00
Florian Fainelli 88eadf541f add required symbols to allow building of 2.6.35.7
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 23594
2010-10-23 18:56:19 +00:00
Florian Fainelli a6873b3095 Use -pipe for net5501 and geos CFLAGS, same as all of the other platforms
Makes the builds run slightly faster on multicores.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 23495
2010-10-17 12:42:06 +00:00
Alexandros C. Couloumbis e37cba7e95 target/linux: fix Geos baudrate. (thank you Philip Prindeville)
SVN-Revision: 23414
2010-10-12 15:27:34 +00:00
Jo-Philipp Wich 2bda5979ab Geos -- new x86 subtarget definition This defines the Geos platform from Traverse Technologies in AUS.
This is a Geode LX800 with 512MB of DDR400 memory, 2 8139CP interfaces, 2 Solos ADSL2+ interfaces, USB, serial console, CF slot, and miniPCI slot.

I'll add support for the LEDs separately.

Signed-off-by: Philip A. Prindeville

SVN-Revision: 23390
2010-10-10 22:48:33 +00:00
Imre Kaloz 5f9a6a5431 upgrade kernel versions to the latest stable ones
SVN-Revision: 23219
2010-10-04 10:40:41 +00:00
Felix Fietkau 19723d09c2 x86: turn on optimizations for net5501 (patch by Philip A. Prindeville)
SVN-Revision: 23104
2010-09-20 22:14:07 +00:00