Nicolas Thill
d08b2b02cf
base-files: fix preinit code typos
...
Signed-off-by: Ithamar R. Adema <ithamar.adema@team-embedded.nl>
Acked-by: Daniel Dickinson <cshore@csolve.net>
SVN-Revision: 20124
2010-03-10 18:09:53 +00:00
Felix Fietkau
bfeb96126d
add the block-mount package by Daniel Dickinson (cshore), replacing existing automount functionality
...
SVN-Revision: 19877
2010-02-26 22:45:39 +00:00
Jo-Philipp Wich
2e0d14f9c2
base-files: add /dev/hvcX to hotplug common rules
...
SVN-Revision: 19608
2010-02-12 18:57:01 +00:00
Travis Kemen
9e5844fda2
Here is LVM support for OpenWRT. It introduces 3 new packages: - kmod-dm for the device mapper kernel module. - kmod-libdevmapper for the device-mapper library. - kmod-lvm2 for the lvm tool. Note that it currently does not create the symlinks for all the lvm tools, so you have to use lvm pvs rather than just pvs. Thanks Stefan Monnier
...
SVN-Revision: 19595
2010-02-12 01:37:02 +00:00
Lars-Peter Clausen
275b0d8cd4
Don't do lazy unmounting of filessystems at reboot/poweroff. It is unneeded and could couse a broken filesystem if unmounting takes to long. Thanks to Peter Wagner
...
SVN-Revision: 19568
2010-02-09 18:07:36 +00:00
Felix Fietkau
10ec4fa292
when rebooting, use lazy umounts as fallback (patch by puchu)
...
SVN-Revision: 19429
2010-01-30 18:17:57 +00:00
Felix Fietkau
541725ce18
stop syslogd before rebooting, otherwise umount might not work properly when logging to a file (thx, puchu)
...
SVN-Revision: 19428
2010-01-30 18:17:52 +00:00
Felix Fietkau
d46a32fa60
when rebooting, stop the network interfaces last (just before umount) to allow services to shut down properly (thx, puchu)
...
SVN-Revision: 19427
2010-01-30 18:17:48 +00:00
Felix Fietkau
a254a9ff08
base-files: do not warn about nonexistant sysctl overrides (some of them are config dependent)
...
SVN-Revision: 19375
2010-01-29 02:17:11 +00:00
Felix Fietkau
56bc02a305
add preinit modularization work by Daniel Dickinson (cshore)
...
SVN-Revision: 19331
2010-01-25 17:11:17 +00:00
Jo-Philipp Wich
3634de3b80
base-files: try to activate hotplugged partitions as swap and fall back to lazy mount ( #6517 )
...
SVN-Revision: 19300
2010-01-23 21:58:01 +00:00
Jo-Philipp Wich
bf9917d651
base-files: disable bridge firewalling by default
...
SVN-Revision: 19214
2010-01-18 05:38:44 +00:00
Felix Fietkau
8ec79b460c
run led init after /etc/init.d/done to keep the configured led settings active after the system has finished booting Signed-off-by: Nuno Goncalves <nunojpg@gmail.com>
...
SVN-Revision: 19050
2010-01-06 02:34:20 +00:00
Felix Fietkau
91a8f2334a
add missing argument to debug/mount wrappers (thx, matteo)
...
SVN-Revision: 18718
2009-12-09 17:13:16 +00:00
Felix Fietkau
889532d1fd
do not start multiple subshells for applying /etc/uci-defaults. use sh -x for hush compatibility
...
SVN-Revision: 18717
2009-12-09 15:15:25 +00:00
Felix Fietkau
f1649982e2
functions.sh: use functions instead of aliases for the debug, mount wrappers - hush does not have aliases
...
SVN-Revision: 18715
2009-12-09 13:36:43 +00:00
Felix Fietkau
e39038f688
mount debugfs by default
...
SVN-Revision: 18502
2009-11-23 20:35:05 +00:00
Jo-Philipp Wich
cfe1bc11ad
base-files: only try to execute watchdog if binary is present
...
SVN-Revision: 18102
2009-10-20 17:07:08 +00:00
Jo-Philipp Wich
f44e4dcb4b
base-files: add hotplug rules for /dev/lpX ( #863 )
...
SVN-Revision: 17792
2009-09-28 20:05:50 +00:00
Nicolas Thill
6478e24f7d
accommodate for 5 digits svn revisions :)
...
SVN-Revision: 17670
2009-09-22 03:05:45 +00:00
Jo-Philipp Wich
bdaeaafbef
base-files: introduce a ready-to-use /etc/rc.local to let users run custom commands on init without creating custom init scripts
...
SVN-Revision: 17571
2009-09-11 21:35:03 +00:00
Felix Fietkau
91d40a14af
Revert "fix nonhotpluggable networks not being brought up. Closes #2781" (r17527) until we've solved the race conditions it creates
...
SVN-Revision: 17544
2009-09-09 00:16:55 +00:00
Travis Kemen
27915ac778
fix nonhotpluggable networks not being brought up. Closes #2781
...
SVN-Revision: 17527
2009-09-06 17:02:14 +00:00
Gabor Juhos
f494bcc222
package/base-files: set state to 'preinit' before preinit.arch is used, and set state to 'failsafe' when entering failsafe mode
...
SVN-Revision: 17517
2009-09-05 18:44:48 +00:00
Felix Fietkau
7d67818ab1
Revert "add ifup -a to boot(), closes #4543 #2781" (r17515) Hotpluggable interfaces are already brought up before /etc/init.d/network boot and this change can break them, if the ifup -a command runs at the wrong time, also starts many interfaces twice, which can lead to issues with PPPoE.
...
SVN-Revision: 17516
2009-09-05 13:05:59 +00:00
Travis Kemen
1776830e64
add ifup -a to boot(), closes #4543 #2781
...
SVN-Revision: 17515
2009-09-05 05:33:23 +00:00
Travis Kemen
4c47562a37
extend logging functions
...
SVN-Revision: 17514
2009-09-04 21:09:13 +00:00
Felix Fietkau
6155fdf5d3
preinit: fix failsafe mode through ctrl+c on devices that do not provide a preinit.arch file
...
SVN-Revision: 17470
2009-09-02 15:14:53 +00:00
Geoff Levand
525d86686e
udev: Update udev package from udev-106 to udev-142
...
Update the init scripts have to use udevadm where appropriate.
The udev package no longer provides separate udev utilities
like udevtrigger and udevsettle. These have been incorporated
into the udev admin program udevadm.
Replace the udevextras sub package with config options to the udev
package.
Update the preinit script to check for '/lib/udev/devices', and
copy it to '/dev/ if it is found, then to conditionaly setup
/dev the old way with mknod etc. Udev now recommends using
the directory '/lib/udev/devices' to initialize the '/dev'
directory at startup.
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
SVN-Revision: 17378
2009-08-24 20:19:26 +00:00
Jo-Philipp Wich
27da9d1984
base-files: move ipv6 module loading from setup_interface() to addif() in the hotplug call, this ensures that ipv6 is loaded before any interfaces or aliases with ip6addr option are configured ( #5356 )
...
SVN-Revision: 17217
2009-08-10 23:48:10 +00:00
Felix Fietkau
7c32f45749
base-files: clean up init.d/fstab and port it to the new config_get
...
... also remove the unused noauto variable in swapon.
Signed-off-by: Malte S. Stretz <mss@apache.org>
SVN-Revision: 17159
2009-08-07 00:08:01 +00:00
Felix Fietkau
ae0745e240
base-files: port init.d/led to new config_get
...
... and don't call logger directly, rcS takes care of the correct redirection
Signed-off-by: Malte S. Stretz <mss@apache.org>
SVN-Revision: 17158
2009-08-07 00:07:56 +00:00
Felix Fietkau
2892e2f1d5
base-files: port init.d/boot to new config_get
...
... and localize some variables.
Signed-off-by: Malte S. Stretz <mss@apache.org>
SVN-Revision: 17157
2009-08-07 00:07:51 +00:00
Felix Fietkau
387b221aa1
base-files: port functions.sh to new config_get
...
Signed-off-by: Malte S. Stretz <mss@apache.org>
SVN-Revision: 17156
2009-08-07 00:07:46 +00:00
Felix Fietkau
4dbaccf0cd
base-files: allow default value for config_get
...
Signed-off-by: Malte S. Stretz <mss@apache.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 17155
2009-08-07 00:07:42 +00:00
Florian Fainelli
de3a491240
simplify action handling in rc.common ( #5558 )
...
SVN-Revision: 17012
2009-07-26 12:34:09 +00:00
Felix Fietkau
038807906f
change sysctl.conf to disable tcp ecn by default (based on discussion with marek who stumbled upon this, it creates hard-to-debug connectivity issues with providers/servers that still use buggy equipment)
...
SVN-Revision: 16499
2009-06-17 21:57:07 +00:00
Hamish Guthrie
590f3042fb
Removed extra ; in exec rule
...
SVN-Revision: 16243
2009-06-01 08:48:37 +00:00
Florian Fainelli
0be2193e40
fix drivers firmware loading with the new hotplug2, patch from Russell Senior
...
SVN-Revision: 16231
2009-05-31 12:08:15 +00:00
Gabor Juhos
9b5e65f101
base-files: set rules file for hotplug2 in the boot script ( closes #5235 )
...
SVN-Revision: 16215
2009-05-30 17:09:41 +00:00
Gabor Juhos
463a6f4bda
base-files: update command line for the new hotplug2
...
SVN-Revision: 16154
2009-05-28 18:48:54 +00:00
Felix Fietkau
cbd52550bd
rcS: wait for init scripts to complete before initiating the shutdown (patch from #5032 )
...
SVN-Revision: 15530
2009-04-30 22:59:18 +00:00
Jo-Philipp Wich
1c41493d74
base-files: make diag.sh stub working in bash
...
SVN-Revision: 15527
2009-04-30 21:00:57 +00:00
Nicolas Thill
2fdeecdb47
add an explicit 'sysinit' tag for logging initscripts output, instead of '' that was logged as is
...
SVN-Revision: 15323
2009-04-21 12:02:34 +00:00
Jo-Philipp Wich
f40eaba4df
fix broken logic in r15272, r15273
...
SVN-Revision: 15274
2009-04-19 17:12:02 +00:00
Jo-Philipp Wich
b0ea64c211
base-files: ( #4928 ) handle "option gateway 0.0.0.0" and "option gateway interface" in route sections as "no gateway given" to allow defining gateway-less routes while still keeping the possibility to have static routes with a proper gateway on interfaces with# dynamic ips
...
SVN-Revision: 15272
2009-04-19 16:51:58 +00:00
Jo-Philipp Wich
a03e00bbcf
base-files: remove redundant netmask handling in 10-routes
...
SVN-Revision: 15219
2009-04-12 16:39:29 +00:00
Felix Fietkau
cf152cff39
tweak some sysctl values for better performance
...
SVN-Revision: 15129
2009-04-07 02:51:04 +00:00
Felix Fietkau
de0332f86a
rename our /bin/login script to /bin/login.sh to avoid collisions with busybox - we always use -l on telnetd anyway
...
SVN-Revision: 15097
2009-04-04 09:35:55 +00:00
Felix Fietkau
714ffa3260
fix failsafe mode
...
SVN-Revision: 15096
2009-04-04 09:35:49 +00:00