9d05b1b683
x86/alix2: add config for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36251
2013-04-07 15:53:08 +00:00
89f690843f
x86: add support for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36250
2013-04-07 15:53:05 +00:00
d1f28c6d1f
ramips: add nor-flash node for the RT-N56U
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36249
2013-04-07 14:46:11 +00:00
0c3c29ca38
ramips: fix pinmux settings for the RT-N56U
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36248
2013-04-07 14:46:10 +00:00
66fbe78a93
ramips: pinmux fixes
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36247
2013-04-07 14:46:09 +00:00
aedf05caa0
ramips: remove trailing whitespaces from dts files
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36246
2013-04-07 13:32:37 +00:00
017aabe292
ramips: handle PCI interrupts in plat_irq_dispatch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36245
2013-04-07 13:25:38 +00:00
811f7f9f2d
fix typos inside dts files
...
Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de>
SVN-Revision: 36244
2013-04-07 11:47:03 +00:00
709b19ed9f
fix default commandline in dts files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36243
2013-04-07 11:46:54 +00:00
85675528da
ramips: add cfi_cmdset_0002 patches
...
The parallel flash access on the RT-N56U is broken
without those patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36242
2013-04-07 11:37:15 +00:00
fde143b66f
cns3xxx: remove the watchdog IRQ from the resources, it breaks the driver init and is useful only for testing
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36241
2013-04-07 11:24:30 +00:00
c270db592a
gcc: remove the bogus CONFIG_TLS_SUPPORT symbol - TLS support is required by libc.
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36240
2013-04-07 10:11:41 +00:00
46072644e5
uClibc: unbreak ld-uClibc on non-64bit platforms
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36239
2013-04-07 10:11:38 +00:00
10d8e4b66c
ramips: remove top-level {address,size}-cells properties from .dts files
...
Those are defined in the SoC specific .dtsi files.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36237
2013-04-07 08:19:10 +00:00
4a46687d25
brcm47xx: use old partition names again for kernel 3.8
...
This fixes sysupgrade. The partition names are used all over the Internet in various howtos.
Thank you russell for spotting this problem.
SVN-Revision: 36235
2013-04-06 22:22:26 +00:00
204bde8d98
brcm47xx: fix error in board detection when nvram is not available.
...
SVN-Revision: 36234
2013-04-06 19:02:25 +00:00
d45ef216e6
linux/3.8: implement pcibios_get_phb_of_node for MIPS
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36233
2013-04-06 17:33:03 +00:00
51fa28e2c2
linux/3.8: backport devm_ioremap_resource from 3.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36232
2013-04-06 17:33:00 +00:00
756b810178
ramips: fix ethernet switch node in DIR-645.dts
...
Fix a typo in the node name and add vendor prefix
for the compatible string.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36231
2013-04-06 17:19:35 +00:00
747b795b56
generic: rtl8367: add compatible string with vendor prefix
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36230
2013-04-06 17:19:31 +00:00
f5d8d80ca9
generic: rtl8367b: fix rtl8367b_extif_init_of
...
* disable external interface if its property is not present
* show an error message if the extif property is not valid
* use proper error values intead of -1
* fix memory leak
* wrap long lines
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36229
2013-04-06 17:03:09 +00:00
32d3b456f0
linux/3.8: add more missing symbols
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36228
2013-04-06 16:56:47 +00:00
38b4865a68
package/kernel: only include i2c-of if CONFIG_OF enabled
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36227
2013-04-06 16:55:25 +00:00
89539462a8
linux/3.8: add missing symbol
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36226
2013-04-06 16:38:36 +00:00
fc0e720f53
kernel: fix md5sum for 3.8.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36225
2013-04-06 13:11:44 +00:00
bf57f33f02
kernel: Allow talitos crypto hw module selection
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36224
2013-04-06 12:41:06 +00:00
1ef39b43dd
ramips: remove spi node from RTN56.dts
...
The RT-N56U board uses a parallel flash.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36223
2013-04-06 12:37:40 +00:00
d57e662cda
ramips: fix ethernet switch node in RTN56U.dts
...
The RT-N56U uses an RTL8367M switch.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36222
2013-04-06 12:37:38 +00:00
4becd8590c
ramips: rt3883: enable the RTL8367 driver
...
That is needed by the Asus RT-N56U board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36221
2013-04-06 12:37:37 +00:00
38bd9b4337
generic: rtl8367: allow to load extif config from OF
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36220
2013-04-06 12:37:36 +00:00
585d19d168
generic: rtl8367: fix a typo in MODULE_DEVICE_TABLE macro
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36219
2013-04-06 12:37:34 +00:00
68c931c637
generic: rtl8367: add vendor prefix to the compatible string
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36218
2013-04-06 12:37:32 +00:00
348640f4b3
ramips: rt3883: sync 3.8 config
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36217
2013-04-06 12:37:31 +00:00
d16de0b69f
fix typo pinmmux -> pinmux
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36216
2013-04-06 11:46:34 +00:00
f78c902cfd
kernel: update linux 3.8 to 3.8.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36215
2013-04-06 11:40:44 +00:00
202fb45deb
refresh kernel configs with kconfig.pl
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36214
2013-04-06 11:40:41 +00:00
df7af06f1f
fix dir-615 h1 network config
...
http://patchwork.openwrt.org/patch/3527/
Signed-off-by: Daniel Petre <dani@ip6.ro>
SVN-Revision: 36213
2013-04-05 23:37:45 +00:00
e1a74d8ff7
fix typo that made gpiomuxing fail
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36212
2013-04-05 23:10:42 +00:00
495296bba9
malta: add le64 and be64 sub targets
...
These two subtargets are used to build a 64-bit malta kernel along with
64-bit userland support.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36211
2013-04-05 12:36:48 +00:00
12b925dcbf
malta: move 32-bits options to subtarget config
...
Preliminary change to add support for MIPS64-based malta subtargets.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36210
2013-04-05 12:36:45 +00:00
5eb8ba7f19
malta: move endianness kernel configuration to subtarget
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36209
2013-04-05 12:36:41 +00:00
f4c09ea554
toolchain/uClibc: backport a MIPS64 fix from openadk
...
Fixes uClibc dynamic loader name requested by executables when
targetting MIPS64 n64
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36208
2013-04-05 12:36:37 +00:00
463b80c3d1
toolchain/uClibc: handle different MIPS64 ABIs
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36207
2013-04-05 12:36:31 +00:00
2f972664ec
toolchain: musl is not available on MIPS64
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36206
2013-04-05 12:36:26 +00:00
e032922266
toolchain: allow choosing the MIPS64 user-land ABI
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36205
2013-04-05 12:36:23 +00:00
348cae15d2
buildroot: factor knowledge of a 64bits architecture
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36204
2013-04-05 12:36:19 +00:00
46dfa04a08
malta: enable mips16 feature flag
...
The malta platform supports mips16 advertise this feature flag.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36203
2013-04-05 12:36:16 +00:00
9e1d2c15d9
buildroot: allow enabling MIPS16 user-space build
...
Enabling MIPS16 is made conditional on advertising the "mips16" feature
for a specific target since it requires support from the CPU
(HAS_MIPS16) and the actual use of MIPS16 for building packages
(USE_MIPS16).
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36202
2013-04-05 12:36:12 +00:00
f223d0927e
openssl: Pass in any TARGET_ASFLAGS
...
Packages not picking up the regular TARGET_AS need their openwrt
Makefiles tweaked. For a basic build, that's just openssl.
This depends on patch 1/5.
Signed-off-by: Jay Carlson <nop@nop.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36201
2013-04-05 12:36:09 +00:00
9dc38e48f7
toolchain/gcc: .init and .fini need to pick one ISA
...
The .init and .fini sections are built by concatenating code
fragments. Putting mips16 code in the middle of a mips32 code block
doesn't work. Make gcc built the magic crt stuff in no-mips16 mode.
This is specific to 4.6-linaro but is probably portable to other gcc
flavors. Adding this to the t-libgcc-mips16 makefile fragment is a
hack not suitable for pushing upstream, but there is no mips/t-linux
or mips/t-uclibc and I am not going to touch gcc/configure for two
lines.
Signed-off-by: Jay Carlson <nop@nop.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36200
2013-04-05 12:36:06 +00:00
Gabor Juhos
John Crispin
Felix Fietkau
Hauke Mehrtens
Florian Fainelli