Commit Graph

11399 Commits (3194834c55c3f4753565664d98adf0c57e9e5f5f)

Author SHA1 Message Date
Gabor Juhos a2543d72d8 kernel: update 3.10 to 3.10.28
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39399
2014-01-26 11:30:34 +00:00
Gabor Juhos e41e531e3b ar71xx: image: reserve 4 erase blocks on the TP-Link devices
This ensures that the generated images will have enough erase
blocks for JFFS2.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39397
2014-01-25 18:12:13 +00:00
Gabor Juhos 50f38063cd ar71xx: archer c7: define LEDs connected to the AR8327 switch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39395
2014-01-25 11:16:59 +00:00
Gabor Juhos f1a9ed8345 ar71xx: image: move WNDAP360 macro
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39394
2014-01-25 08:31:45 +00:00
Gabor Juhos 715c7533b9 kernel/3.8: update pci_disable_usb_common_quirks patch
Fix build errors caused by undefined 'usb_disable_xhci_ports'
symbol.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39393
2014-01-25 08:25:05 +00:00
Gabor Juhos f85231257e ar71xx: fix bad RX sensitivity on newer TL-WDR4300 boards
On recent TL-WDR4300 boards the external LNAs of the 2.4GHz
interface are connected to GPIO lines. Because these GPIO
lines are disabled by default, the RX sensitivity of the
device is quite bad.

Setup the GPIOs of the external LNAs to fix the issue.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39392
2014-01-24 17:40:17 +00:00
Gabor Juhos 09bf46d418 ar71xx: image: generate sysupgrade images for the Compex boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39391
2014-01-24 17:15:03 +00:00
Gabor Juhos 252e906dda ar71xx: add sysupgrade support for the Compex boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39390
2014-01-24 17:15:02 +00:00
Gabor Juhos 0c0b87293e ar71xx: image: use a single firmware partition on Compex devices
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39389
2014-01-24 17:15:01 +00:00
Gabor Juhos 2995030b47 ar71xx: enable MTD_SPLIT_LZMA_FW option
It will be used for Compex devices.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39388
2014-01-24 17:15:01 +00:00
Gabor Juhos 89d60314e7 kernel/3.1x: add split code for LZMA compressed kernel based firmwares
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39387
2014-01-24 17:14:59 +00:00
Gabor Juhos 998c89a9a6 ar71xx: image: detect partition sizes in the Image/Build/Ath macro
Get the size of the mtd partitions directly from the
MTD layout and remove the superfluous macro parameters.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39384
2014-01-24 11:59:35 +00:00
Gabor Juhos 4556632578 ar71xx: image: fix size verification in the CatFiles macro
The macro checks the size of the rootfs image even if
the second parameter of the macro contains the size of
an eraseblock. It is wrong because the size of the
kernel image will be adjusted to the next eraseblock
and the resulting image might be too large.

Fix the macro to check the size of the final image
instead of the rootfs image.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39383
2014-01-24 11:59:32 +00:00
Gabor Juhos e89476e0a8 Revert "kernel: create firmware partition from MyLoader partition parser"
This reverts r38197.

The automatically created firmware partition includes
the partition_table partition. Apart from the partition
table, this partition contains sensitive data on some
Compex devices which data can be destroyed when the
firmware partition gets modified. Revert the change to
prevent that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39382
2014-01-24 08:48:10 +00:00
Gabor Juhos 56136c0f34 ar71xx: ap83: define mtd layout via command line
Also use the RKuImage macro becasue the original
firmware starts with the rootfs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39379
2014-01-23 16:47:42 +00:00
Gabor Juhos a59e82761f ar71xx: ap81: define mtd layout via command line
Also use the RKuImage macro becasue the original
firmware starts with the rootfs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39378
2014-01-23 16:47:41 +00:00
Gabor Juhos 9f4e2bf326 ar71xx: image: show size limit in warning messages
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39376
2014-01-23 12:27:28 +00:00
Gabor Juhos 447530995a ar71xx: add initramfs image support for Compex devices
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39375
2014-01-23 12:23:10 +00:00
Gabor Juhos b629009eaa ar71xx: wp543: use KEY_RESET code for the sw4 button
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39374
2014-01-23 12:23:08 +00:00
Luka Perkov cbc892a549 ar71xx: create wndr3700 network config from uci-defaults
Since that was the last configuration in defconfig directory we can drop the
defconfig init script too.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39373
2014-01-23 11:33:42 +00:00
Gabor Juhos bbe086873a kernel/3.10: update pci_disable_usb_common_quirks patch
Fix build errors caused by undefined 'usb_disable_xhci_ports'
symbol.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39369
2014-01-23 09:07:49 +00:00
Gabor Juhos 53512a1961 mpc85xx: Fix building ramdisk images
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39368
2014-01-23 06:55:58 +00:00
Gabor Juhos 30af45d19a mpc85xx: Remove inittab workaround
The default inittab uses "askconsole" which is implemented by procd
and uses the console provided by the kernel command line.

Hence, this platform specific workaround is not necessary anymore.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39367
2014-01-23 06:55:50 +00:00
Florian Fainelli a747611fe3 brcm63xx: enable support for BCM63268
Support for the BCM63268 is usable, enable it by default.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39364
2014-01-21 18:50:26 +00:00
Florian Fainelli eaa3e9ec6e brcm63xx: add support for BCM963269BHR board
Add kernel support for the BCM963269BHR board, USB and Ethernet switch,
LEDs and buttons are working.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39363
2014-01-21 18:50:11 +00:00
Florian Fainelli fed4b02a68 brcm63xx: improve BCM63268 support
Allow using the HSSPI controller since it works just fine, as well as
the integrated switch core, since that one works too.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39362
2014-01-21 18:49:50 +00:00
Gabor Juhos 0b599c51cc ar71xx: mynet-n750: define LEDs connected to the AR8327 switch
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
Patchwork: http://patchwork.openwrt.org/patch/4743/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39361
2014-01-21 17:17:42 +00:00
Zoltan Herpai f3c07b8621 modules: swconfig.c: update the error path on 3.13, and behave nicely with return
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39360
2014-01-21 14:43:50 +00:00
Zoltan Herpai 4d26250db1 modules: update swconfig.c to compile on 3.13 (compile-tested)
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39359
2014-01-21 14:24:45 +00:00
Zoltan Herpai a7a890d9e8 add missing symbols
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39358
2014-01-21 14:23:00 +00:00
Jonas Gorski d5b4292032 kernel: ocf: add missing dependency for hifn driver
The HIFN driver is a PCI driver, thus requires PCI support to be enabled
to compile. Therefore let it depend on PCI..

Should fix mvebu builds.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39357
2014-01-21 12:11:18 +00:00
Zoltan Herpai 7ee639a81c add missing symbols
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39355
2014-01-21 07:53:11 +00:00
Hauke Mehrtens 1f4e6394ed b53: use drvdata to store driver data
we should not abuse the platform_data pointer.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39354
2014-01-20 20:01:22 +00:00
Hauke Mehrtens de266cd1c1 b53: make b53_switch_reset_gpio() static
SVN-Revision: 39353
2014-01-20 19:07:18 +00:00
Zoltan Herpai 2cf8391b75 update ocf patches - as ENT_DEBUG is removed, move the messages into pr_notice
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39350
2014-01-20 15:23:27 +00:00
Imre Kaloz c89e789913 update/fixup overlayfs patch
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39349
2014-01-20 14:46:29 +00:00
Imre Kaloz 6bd1a37001 add initial 3.13 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39348
2014-01-20 13:56:24 +00:00
Gabor Juhos 506b40b628 ar71xx: tl-wr1043nd-v2: define LEDs connected to the AR8327 switch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39346
2014-01-20 10:23:06 +00:00
Gabor Juhos c17cfab560 ar71xx: tl-wdr4300: define LEDs connected to the AR8327 switch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39345
2014-01-20 10:23:05 +00:00
Gabor Juhos db5f22a2d7 ar71xx: set default LED config for the RB2011* boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39344
2014-01-20 10:23:04 +00:00
Gabor Juhos 927809e59b ar71xx: set status_led for the RB2011* boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39343
2014-01-20 10:23:03 +00:00
Gabor Juhos 07f76a164a ar71xx: fix indentation in diag.sh
Replace the leading spaces with tabs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39342
2014-01-20 10:23:02 +00:00
Gabor Juhos 4c54635106 ar71xx: rb2011: define LEDs connected to the AR8327 switch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39341
2014-01-20 10:23:01 +00:00
Gabor Juhos 31d6ad289f ar71xx: enable AR8327 LED support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39340
2014-01-20 10:23:00 +00:00
Gabor Juhos 2d28a07df7 kernel/3.1[02]: add AR8216_PHY_LEDS option
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39339
2014-01-20 10:22:59 +00:00
Gabor Juhos 0056ac55af generic: ar8216: add custom LED support for the AR8327 switch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39338
2014-01-20 10:22:56 +00:00
Gabor Juhos 15d41de1eb generic: ar8216: allow to use chip specific cleanup callback
It will be used for AR8327.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39337
2014-01-20 10:22:55 +00:00
Gabor Juhos c7652f1f9e generic: ar8216: add optimized rmw operation
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39336
2014-01-20 10:22:54 +00:00
Gabor Juhos b4dc45e07d ar71xx: rb2011: fix eth5 LED
The eth5 LED on the RB2011 is not working because the
LED control rule is missing. Fix it.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39335
2014-01-20 10:22:49 +00:00
John Crispin ebaa3817a7 ralink: activate xhci config
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39330
2014-01-19 17:27:31 +00:00
John Crispin a818a3cf8f ralink: backport various fixes from linux-mti
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39329
2014-01-19 17:27:22 +00:00
John Crispin a75b692557 ralink: add xhci driver
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39328
2014-01-19 17:27:13 +00:00
Jonas Gorski d513c07d2f brcm63xx: fix typo breaking build in r39325
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39326
2014-01-19 14:00:18 +00:00
Jonas Gorski 66ec204935 brcm63xx: set usb host port number for some devices
Update a few devices with their actual port numbers, especially those
with two ports.

Should allow properly using the second port on the Neufboxen and HW553
and HW556.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39325
2014-01-19 13:46:25 +00:00
Jonas Gorski ef81c6a268 brcm63xx: allow setting the number of usb host ports for boards
Allow setting the number of available usb host ports for boards with
additional sanity checks to allow using the second port on devices
where it is available.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39324
2014-01-19 13:46:14 +00:00
Jonas Gorski 6b3e1c8de6 brcm63xx: add USB support for BCM63268
Add and enable USB support for the BCM63268 family of SoCs.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39323
2014-01-19 13:46:05 +00:00
Jonas Gorski 33f426c795 brcm63xx: BCM6318 needs to select _HAS_OHCI/EHCI too
USB will fail to work if compiling with BCM6318 only if BCM63XX_HAS_EHCI
and BCM63XX_HAS_OHCI are not selected.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39322
2014-01-19 13:45:55 +00:00
Jonas Gorski 52b7f55cb3 brcm63xx: prevent usb clock state inconsistency on BCM6318
Return the same clock for usbh and usbd on BCM6318 to prevent the clock
getting disabled despite being supposed to be enabled, e.g. by the
following sequence:

	clk_enable(usbh); <- usbh->usage = 1, enabled
	clk_enable(usbd); <- usbd->usage = 1, enabled (no effect)
	clk_disable(usbd); <- usbd->usage = 0,  -> disabled!

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39321
2014-01-19 13:45:42 +00:00
Imre Kaloz b6e1cbd8dd generate images for the On Networks N150 (rebranded Netgear WNR612v2)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39320
2014-01-18 19:44:40 +00:00
Florian Fainelli 0650ce9ec4 brcm63xx: do not add twice the same field to board
Changeset r39302 updated a board section and added twice .has_ehci0,
this is not necessary, so fix it.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39304
2014-01-16 00:45:19 +00:00
John Crispin 053d596297 lantiq: Add support for Astoria ARV7510PW22
This board is pretty similar to ARV752DPW22.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 39303
2014-01-15 19:16:51 +00:00
Florian Fainelli bf4f1feb7a brcm63xx: add USB support to BCM6318
BCM6318 has a special initialization sequence which involves touching
PLL control registers in the USBH_PRIV register space, as well as
toggling a bit the Simulation control register.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39302
2014-01-15 19:05:57 +00:00
Luka Perkov a467c52eca mvebu: fix build failures when initramfs is not selected
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39301
2014-01-15 18:38:51 +00:00
John Crispin f3a243c3dd ramips: Add profile for the Edimax BR-6475nD
Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org>

SVN-Revision: 39299
2014-01-15 18:29:51 +00:00
John Crispin beb29461ff ramips: Add userspace support for the Edimax BR-6475nD
The rt2x00 wifi driver may still need updating to
function with this device.

Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org>

SVN-Revision: 39298
2014-01-15 18:29:44 +00:00
John Crispin 62dd252b86 ramips: rt3883: Fix a typo in rt3883.dtsi
Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org>

SVN-Revision: 39297
2014-01-15 18:29:03 +00:00
Luka Perkov 26dcf1c7c9 lantiq: update kernel configuration
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39296
2014-01-15 14:11:36 +00:00
Florian Fainelli 3114410a13 brcm63xx: fix BCM96318MVWG LEDs
Power LED is not active low, and ppp-fail is red, not green.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39294
2014-01-15 00:06:08 +00:00
Florian Fainelli 1f7edcf637 brcm63xx: remove config-3.11
This was not supposed to be committed, remove it.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39293
2014-01-15 00:05:51 +00:00
Florian Fainelli bd540554a4 brcm63xx: 96368MVWG supports USB gadget, enable it
Enable the use of the USB gadget device at the board level so we can use
bcm63xx_udc on this board.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39292
2014-01-14 23:56:46 +00:00
Florian Fainelli 092a7105ec brcm63xx: replace gadget driver build fix with upstream submission
Also fixing a build warning due to a misplaced parenthesis in the
previous submission.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39291
2014-01-14 23:56:28 +00:00
Florian Fainelli 01f465df05 brcm63xx: add support for the BCM96318REF_P300 board
Very similar to the BCM96318REF board except for the name and the
SDRAM/DDR configuration which is totally transparent for us.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39286
2014-01-14 05:24:19 +00:00
Florian Fainelli 6f48336dc4 brcm63xx: enable 6318 support
BCM6318 support is usable enough to be enabled by default, turn it on.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39284
2014-01-14 05:23:58 +00:00
Florian Fainelli 93ab8adef2 brcm63xx: add basic support for the BCM96318REF board
Add basic support for the BCM96318REF board which is comprised of:
- HS-SPI flash support
- Ethernet switch support
- USB slave device support

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39283
2014-01-14 05:23:49 +00:00
Florian Fainelli 0ecdc42f60 brcm63xx: improve BCM6318 support
Provide clock toggling for the USB host and slave controller as well as
for the Ethernet Switch. The bcm63xx_enetsw driver is changed not to use
request_mem_region() as the Roboswitch register overlaps with the
Roboswitch IUDMA channels, hence making the driver return -EBUSY. A
future fix might be to use variable size RSET_ENETSW sizes depending on
the chip we are targetting.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39282
2014-01-14 05:23:39 +00:00
Florian Fainelli 7951993efd brcm63xx: package the USB gadget module (bcm63xx_udc)
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39281
2014-01-14 05:23:20 +00:00
Florian Fainelli 8bdc92f5d6 brcm63xx: target supports USB gadget devices
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39280
2014-01-14 05:23:08 +00:00
Florian Fainelli fb8ae05760 brcm63xx: fix USB gadget build failure after 6345 Ethernet
While adding support for BCM6345 Ethernet, some changes in the macros
ENETDMA{C,S} where introduced which now make the bcm63xx USB gadget
driver fail to build. Fix this.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39279
2014-01-14 05:22:59 +00:00
Florian Fainelli a6425f8437 brcm63xx: allow HSSPI registration on 6318
A missing condition check in dev-hsspi.c prevented the controller from
being registered on 6318 where it is fully functional.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39278
2014-01-14 05:22:45 +00:00
Florian Fainelli 49ae212eee brcm63xx: fix build failure on varid
varid might both unused and unitialized when building for e.g: bcm6318,
fix these two warnings turned into errors.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39277
2014-01-14 05:22:31 +00:00
Zoltan Herpai d8afb543d0 sunxi: fix image generation
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39276
2014-01-13 16:18:02 +00:00
Jonas Gorski e83c1ec61c brcm63xx: fix ohci frame number offset
BCM63XX's ohci controller does not need the frame number shift, but that
was guarded with a PPC symbol. Fix this by making the no-fix generally
available.

This is a regression from the previous conversion to ohci platform driver.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39274
2014-01-13 12:21:08 +00:00
Jonas Gorski 1315058bda brcm63xx: fix spi flash setup on (at least) some reference boards
CFE seems to leave the SPI flash mapping in an invalid state after
loading the kernel on some reference boards, so fix it up on boot.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39273
2014-01-13 12:14:12 +00:00
Jonas Gorski 4aa92df0d8 brcm63xx: add initial support for BCM6318
Add inital support for BCM6318, but keep it disabled for now until
most things are supported.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39272
2014-01-13 12:14:02 +00:00
Jonas Gorski 3bdcf040aa brcm63xx: add initial support for BCM63268
Add initial support for the BCM63268 family of SoCs, but keep it
disabled for now as most things don't work yet.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39271
2014-01-13 12:13:51 +00:00
Jonas Gorski ab8897045c brcm63xx: fix the pcie window size
The low PCIe window on BCM6328 and BCM6362 is actually only 1 MiB big,
not 16 MiB.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39270
2014-01-13 12:13:39 +00:00
Jonas Gorski 76164e1a36 brcm63xx: add support for chip variants
Some SoCs have variants which are mostly the same, but use a different
chip id (or not). Add code for detecting them and handling them as
their standard counterparts.

This adds support for e.g. BCM6369.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39269
2014-01-13 12:13:26 +00:00
Jonas Gorski db36359f48 brcm63xx: remove non runtime detect and refresh affinity patches
Remove the non runtime detect code since its effectiveness is dubious
and almost never used.
Also update affinity patches to work on top of it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39268
2014-01-13 12:13:15 +00:00
Jonas Gorski d8ac24b325 brcm63xx: update bmips patches with upstream submission
Update bmips cleanup patches with upstream submission and backport a few
bmips fixes.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39267
2014-01-13 12:13:05 +00:00
Jonas Gorski d9a20b6f46 brcm63xx: spi flash on legacy spi controller needs the workaround
Fixes generic SPI flash accesses on BCM6358/BCM6368. BCM6338 still needs
additional fixes for M25P80, so it remains broken for now.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39266
2014-01-13 12:12:50 +00:00
Jonas Gorski af7e570c3b brcm63xx: fix legacy spi tranfers >= 256 bytes
Fixes e.g. SPI flash access on BCM6358/BCM6368. Transfers < 256 bytes
are not affected.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39265
2014-01-13 12:11:58 +00:00
Jonas Gorski f08f0cafc2 brcm63xx: update HSSPI driver with upstream submission
Update the HSSPI driver with the upstream submitted one that has a
workaround for the auto cs down issue.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39264
2014-01-13 12:11:45 +00:00
Zoltan Herpai d0a757147b sunxi: various changes - rename hstimer DT on sun5i to avoid confusion - add Cubietruck support - select watchdog by default - select rtc in profiles where appropriate - cosmetic changes
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39263
2014-01-12 19:23:29 +00:00
Hauke Mehrtens a248495ae9 x86: remove unused code for kernel 3.7
There are no generic patches for kernel 3.7 any more, remove this stuff.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39262
2014-01-12 19:17:49 +00:00
Hauke Mehrtens 6df49552fc brcm47xx: add brcmsmac + bgmac profile
Signed-off-by: Cody P Schafer <devel@codyps.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39258
2014-01-12 19:04:54 +00:00
Hauke Mehrtens f912b47931 brcm47xx: parse model from cpuinfo
Instead of looking into the proc entry provided by broadcom-diag use
the board info from /proc/cpuinfo to get the board we are on.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39256
2014-01-12 18:56:57 +00:00
Hauke Mehrtens bcdea80b0b brcm47xx: fix led indication
Use the new led api also on brcm47xx.
The led for failsafe indication is searched for.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39255
2014-01-12 18:56:36 +00:00
Hauke Mehrtens edab966e45 brcm47xx: fix network failsafe indication
Remove the code used on the old switch driver.
The Ethernet drive is loaded as a module and needs some time to get up
therefor we added some wait function.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39254
2014-01-12 18:56:15 +00:00
Hauke Mehrtens f4f31511fd brcm47xx: do not use broadcom-diag
This makes brcm47xx target use the default gpio led and button driver
and not broadcom-diag any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39253
2014-01-12 18:55:52 +00:00
Hauke Mehrtens c2992ee273 brcm47xx: add new led and button support
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39252
2014-01-12 18:55:25 +00:00