Felix Fietkau
2e1f6f1682
mvebu: work around an ethernet tx scheduling fairness issue
...
The hardware queue scheduling is apparently configured with fixed
priorities, which creates a nasty fairness issue where traffic from one
CPU can starve traffic from all other CPUs.
Work around this issue by forcing all tx packets to go through one CPU,
until this issue is fixed properly.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 14:56:57 +01:00
Felix Fietkau
3be4c6ca93
kirkwood: only add UBI EOF markers for devices that need it
...
Fixes issues where the second-stage u-boot already uses UBI.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 14:04:18 +01:00
Felix Fietkau
e21cb649a2
ar71xx: disable sub-page writes on routerboard nand drivers
...
They seem to fail in tests using UBI, and are not used by yaffs2
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 13:10:19 +01:00
Felix Fietkau
b7bee2858b
kernel: remove linux 4.1 support
...
The only target still referencing it is omap24xx, and it is marked as
broken.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 13:09:33 +01:00
Felix Fietkau
b1dbe6028e
ar71xx: fix legacy image build error
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 13:09:21 +01:00
Felix Fietkau
1b17f4f260
arc770: fix parallel build issue
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 13:02:42 +01:00
Felix Fietkau
3fa2c77e3a
archs38: fix parallel build issue
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 13:02:41 +01:00
Felix Fietkau
889272d92d
ar71xx: fix RB4xx CPLD SPI device mode setup
...
Commit af79fdbe4a
changed the code to use tx_nbits for dual SPI tx
transfers, however the SPI stack only allows this when the device mode
includes the relevant bit as well
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 13:02:11 +01:00
Felix Fietkau
c3a8b87773
ar71xx: fix RB4xx SPI driver mode bits
...
Accept SPI_TX_DUAL in device mode to fix the CPLD driver
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 13:02:11 +01:00
Felix Fietkau
80dbaa4ef3
kernel: backport a MIPS SMP icache flush fix
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 10:05:08 +01:00
Rafał Miłecki
7c8a36340c
kernel: update bcm47xxpart failsafe partition patches
...
V2 using helper function was sent for upstream kernel
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-11 09:54:47 +01:00
Jo-Philipp Wich
7480d3309c
kernel: add missing config symbols
...
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-10 22:02:40 +01:00
Felix Fietkau
e9b49a41e2
kernel: add missing config symbol
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 17:49:47 +01:00
Felix Fietkau
c9dd40f628
kernel: remove gpiommc patches / driver
...
This code was marked as incompatible to Linux 4.4 well over a year ago
and nobody cared, and now it's breaking builds.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 15:45:33 +01:00
Rafał Miłecki
1a5cb4ac1b
kernel: add pending bcm47xxpart support for failsafe TRX partition
...
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-10 15:37:22 +01:00
Rafał Miłecki
ef9208c51e
kernel: update spi-nor.h include fix with upstream accepted version
...
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-10 15:37:22 +01:00
Rafał Miłecki
b4d2575add
kernel: rename bcm47xxpart patches to fit more of them
...
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-10 15:37:21 +01:00
Felix Fietkau
01d9527357
kernel: remove DEVTMPFS platform overrides
...
Those options are handled via top-level menuconfig instead
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 13:48:53 +01:00
Felix Fietkau
c2fc52ae22
kernel: remove DEVMEM/DEVKMEM platform overrides
...
Those options are handled via top-level menuconfig instead
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 13:48:53 +01:00
Felix Fietkau
7ff7be96dd
omap: build various core drivers into the kernel instead of packaging them
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 13:44:26 +01:00
Felix Fietkau
10f7a8d648
kernel: add missing config symbol
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 13:44:25 +01:00
Felix Fietkau
f5c649d7c6
mpc85xx: build i2c support into the kernel instead of packaging it separately
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 13:44:25 +01:00
Felix Fietkau
96ade7adae
mpc85xx: build usb support into the kernel instead of packaging it separately
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 13:44:24 +01:00
Stijn Tintel
0d3dc16931
ar71xx: drop references to madwifi
...
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 13:02:00 +01:00
Felix Fietkau
06c76e41d7
ppc44x: mark as broken
...
This target has consistently failed builds for a long time and it does
not look like it has any users left, nor any maintainers.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:49:34 +01:00
Felix Fietkau
43a528eb96
kernel: add missing config symbol
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:37:13 +01:00
Kabuli Chana
fe876e9ac6
mvebu: Fix up some leds on this series
...
correct ports, fix power led on rango, tested mamba,shelby,rango
Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
2017-01-10 12:28:32 +01:00
Felix Fietkau
acd0c8c178
kernel: move the gateworks system controller driver to an out-of-tree package
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
c00e5a4f09
mpc85xx: enable the crypto acceleration driver in the kernel config instead of packaging it
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
a2f6b56c8f
imx6: enable the crypto acceleration driver in the kernel config instead of packaging it
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
29443e2c94
mxs: remove modules.mk, select drivers in the kernel config
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
915d7db9bd
mxs: remove obsolete kernel package depending on linux 3.18
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
64be6fe9ca
mxs: enable the chipidea usb driver in the kernel config instead of packaging it
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
7450698957
imx6: enable the chipidea usb driver in the kernel config instead of packaging it
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
7f0796d874
imx6: remove kmod-thermal-imx, it is already enabled in the kernel config
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
348fedc1a6
imx6: build support for the ventana ethernet expansion board into the kernel instead of packaging it
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
c524d1b256
imx6: enable the Freescale SNVS RTC driver in the kernel config instead of packaging it
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Florian Fainelli
e3358b2cc1
malta: Fix README file examples
...
The example command-lines used references and paths from an older directory
structure.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-01-10 08:54:59 +01:00
Antonis Kanouras
f2b6412c72
ramips: Fix VLAN limits for MT7621 GSW
...
Without this patch swconfig will only allow setting up a total of 16
VLANs, with VLAN ID range of 0-15.
Tested on ubnt-erx.
Signed-off-by: Antonis Kanouras <antonis@metadosis.eu>
2017-01-10 08:18:15 +01:00
Pavel Kubelun
6ebb46a40a
ipq806x: fix pvs1_bin voltage in ipq8065 DT
...
Fixing pvs1 bin voltage as found in GPL tarball and Qualcomm SDK.
Also adjusting smb208_s2a/b minimum voltage to reflect lowest value in pvs table.
Current ipq8065 devices in LEDE choose (based on eFuse data) pvs bin n4, that has
correct values in DT, but in future a new device may choose n1 or n6.
Without this change n1 is semi-correct and n6 is not available, because OPP driver
disregards bins with voltage values that regulator cannot supply.
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2017-01-10 08:11:14 +01:00
Hauke Mehrtens
f036956e1f
lantiq: update USB controller initialization
...
This adds USB initialization fixes for Danube, Amazon SE and xrx300 and
should fix the clock on at least Danube which hopefully closes FS#351.
The xrx200 usb driver now uses more memory for the dwc2 fifos, this was
increased in the chip compared to ar9.
This is based in part on the vendor documentation and the vendor code
base as a reference.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-01-09 23:25:34 +01:00
Hauke Mehrtens
2dac67464d
lantiq: fix dma locking problems with SMP
...
The DMA controller used only local locks, which will not lock the
section against other CPUs, fix this by using spin locks.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-01-09 20:23:28 +01:00
Felix Fietkau
1c6b1ab01d
imx6: fix image boot ubifs compression option
...
--force-compr was added by the xz compression patch, which is gone now.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-09 16:29:45 +01:00
Felix Fietkau
018d80007e
kernel: remove ubifs xz decompression support
...
It has been unused, and less useful than squashfs for cases where flash
space usage matters.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-09 14:07:06 +01:00
Felix Fietkau
50a3bce3eb
rb532: drop patch-cmdline from base-files
...
It is no longer used for upgrading
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-07 17:50:57 +01:00
Felix Fietkau
ad76fdfc8a
rb532: switch to UBI, drop yaffs2 support, use sysupgrade for NAND
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-07 17:50:57 +01:00
Felix Fietkau
5b6b0aa267
rb532: convert to new loopback based overlay support
...
Disable block2mtd support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-07 17:50:57 +01:00
Daniel Golle
b18f75c3d8
oxnas: minor kernel config improvements
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-01-07 15:27:30 +01:00
Daniel Golle
69903c3ee6
oxnas: require image metadata
...
Now that we generate images with metadata attached, require it in order
to prevent accidentally flashing the wrong image to a board.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-01-07 14:47:04 +01:00
Daniel Golle
870b7bee44
oxnas: remove some kprintf calls from NAND driver
...
They were added for debugging and I forgot to remove them.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-01-07 14:47:04 +01:00