Commit Graph

1814 Commits (2af995ba1d2d55af339651fd84ef682700c975a0)

Author SHA1 Message Date
Gabor Juhos ed1889db33 ar71xx: add kernel support for the AP136-020 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34884
2012-12-26 09:50:34 +00:00
Gabor Juhos c887a7fe4e ar71xx: rename AP136 to AP136-010
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34883
2012-12-26 09:50:31 +00:00
Gabor Juhos f8b4dfd172 ar71xx: dynamically set AR8327's PAD configuration on AP136
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34882
2012-12-25 18:45:32 +00:00
Gabor Juhos 1dc2b6e8fa ar71xx: ag71xx: show PHY interface mode in dmesg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34880
2012-12-25 18:45:29 +00:00
Gabor Juhos 64d31e6c6b ar71xx: register the second ethernet interface on the AP136
Also fix the default network configuration
according to the new setup.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34854
2012-12-22 12:12:50 +00:00
Gabor Juhos 5dec87afef ar71xx: fix ethernet device registration for QCA9558
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34853
2012-12-22 12:12:48 +00:00
Gabor Juhos 84a7051cef ar71xx: rename QCA9558 ETH_CFG bit defines
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34852
2012-12-22 12:12:46 +00:00
Gabor Juhos 4085a5773d ar71xx: fixup allowed PHY interface types for QCA9558
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34851
2012-12-22 12:12:44 +00:00
Gabor Juhos f01a786825 ar71xx: don't assign any MII bus device on QCA9558 by default
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34850
2012-12-22 12:12:43 +00:00
Gabor Juhos 9edcd9d3a3 ar71xx: ag71xx: fix mii_bus_dev sanity check
The mii_bus device is not required if phy_mask is zero.
The driver will use a fixed connection if it is not
specified.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34849
2012-12-22 12:12:41 +00:00
Gabor Juhos ad0f03d250 ar71xx: ag71xx: don't start/stop built-in switch w/o mii_bus_dev
Trying to do that causes a NULL pointer dereference:

CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 801d170c, ra == 801d18d4
Oops[#1]:
Cpu 0
$ 0   : 00000000 00000000 00000000 00000001
$ 4   : 00000000 802e6390 ffff8f45 00000001
$ 8   : 804b5360 ffffff80 802f93bc 00000000
$12   : 802f93e8 00000000 00000000 00000000
$16   : 8381aba0 8381aba0 00000000 00000000
$20   : 8295eff0 00000032 80000000 004101b8
$24   : 00000000 777265b0
$28   : 82936000 82937cf0 00420000 801d18d4
Hi    : 00000000
Lo    : 00000001
epc   : 801d170c ar7240sw_reset+0x1c/0x19c
    Tainted: G           O
ra    : 801d18d4 ag71xx_ar7240_start+0x28/0xc0
Status: 1100fc03    KERNEL EXL IE
Cause : 00800008
BadVA : 00000000
PrId  : 00019750 (MIPS 74Kc)
Modules linked in: ath79_wdt ohci_hcd ledtrig_usbdev ledtrig_netdev
nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp
 ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK
iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack
ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport
xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tab
les ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O)
ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80211(O) c
ompat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash
crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button
_hotplug(O)
Process netifd (pid: 677, threadinfo=82936000, task=82cbe140, tls=77803750)
Stack : ffffffff 80087900 00000001 82937d74 8381aba0 8381aba0 00000000 00000000
        8295eff0 801d18d4 8295eff0 801fa4a4 00420000 80092158 00000002 8381aba0
        8381a800 00000000 00000080 801cf900 8027e720 00000000 00000000 8009223c
        8381a800 8381a82c 8027e720 00000000 00000000 7f9d14f0 00420000 801ec08c
        8381a800 801ebfb0 33000000 82937e30 00000001 8381a800 00001003 801ec348
        ...
Call Trace:
[<801d170c>] ar7240sw_reset+0x1c/0x19c
[<801d18d4>] ag71xx_ar7240_start+0x28/0xc0
[<801cf900>] ag71xx_open+0x1d0/0x258
[<801ec08c>] __dev_open+0xcc/0x130
[<801ec348>] __dev_change_flags+0xc0/0x160
[<801ec490>] dev_change_flags+0x20/0x6c
[<801ec5c8>] dev_ifsioc+0xec/0x348
[<801ecdb8>] dev_ioctl+0x594/0x67c
[<800ec00c>] do_vfs_ioctl+0x598/0x5ec
[<800ec0b0>] sys_ioctl+0x50/0x90
[<8006a3c4>] stack_done+0x20/0x40
Code: afbf0024  afb40020  afb10014 <8c910000> 00809021  24100104 24130704  8e440000  02002821

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34848
2012-12-22 12:12:40 +00:00
Gabor Juhos a0b31f97bb generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34846
2012-12-22 12:12:35 +00:00
Gabor Juhos e108cb91c0 ar71xx: rename fix-ar933x-reset patch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34798
2012-12-20 14:13:16 +00:00
Mirko Vogt e34a4e0c7b Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh)
SVN-Revision: 34793
2012-12-19 16:07:50 +00:00
Gabor Juhos 5f82aa4d15 ar71xx: merge machine patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34783
2012-12-19 08:50:45 +00:00
Gabor Juhos cf99770800 ar71xx: build image for the TL-MR3220 v2
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/

[juhosg: reorder MR3220 MultiProfile entry]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34782
2012-12-19 08:50:44 +00:00
Gabor Juhos b1b7aa674e ar71xx: add user-space support for the TL-MR3220 v2
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/

[juhosg: add uci-defaults/network support]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34780
2012-12-19 08:50:41 +00:00
Gabor Juhos 0767605d17 ar71xx: add kernel support for the TL-MR3220 v2
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/

[juhosg:
 - remove custom LED and button arrays
 - use separate machine specific patch
 - update Kconfig]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34779
2012-12-19 08:50:35 +00:00
Gabor Juhos 149534f3ed ar71xx: image: add OpenMesh profile
It allows to build firmware images for all OpenMesh
products in one step.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34761
2012-12-18 15:16:05 +00:00
Gabor Juhos 44b9898251 kernel: update linux 3.6 to 3.6.11
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34748
2012-12-18 14:41:16 +00:00
Gabor Juhos fc0da6852e ar71xx: nuke 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34743
2012-12-17 22:28:09 +00:00
Gabor Juhos 61d715505c ar71xx: add profile and build image for UniFi AP Pro
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34730
2012-12-17 12:28:21 +00:00
Gabor Juhos abbd18776e ar71xx: add user-space support for UniFi AP Pro
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34728
2012-12-17 12:28:11 +00:00
Gabor Juhos ff3f28265f ar71xx: add kernel support for the UniFi AP Pro
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34727
2012-12-17 12:28:02 +00:00
Gabor Juhos 2e2c88b625 ar71xx: reorder some patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34674
2012-12-14 07:16:56 +00:00
Gabor Juhos 34411a0cbd ar71xx: merge unifi outdoor patch into the ubnt-xm one
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34673
2012-12-14 07:16:50 +00:00
Gabor Juhos d085aad288 ar71xx: add profile and build initramfs image for the WNDR4300
It is not yet possible to use the default squasfsh/jffs2 images
on NAND flashes, so only initramfs image is supported for now.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34650
2012-12-12 16:49:52 +00:00
Gabor Juhos dcdfcb75f0 ar71xx: add user-space support for the NETGEAR WNDR4300
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34649
2012-12-12 16:49:51 +00:00
Gabor Juhos bc82db7d78 ar71xx: add kernel support for the NETGEAR WNDR4300
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34647
2012-12-12 16:49:49 +00:00
Gabor Juhos 75b71f4a74 ar71xx: add ap91_pci_init_simple helper
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34646
2012-12-12 16:49:48 +00:00
Gabor Juhos d7cebac243 ar71xx: add ath79_wmac_register_simple helper
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34645
2012-12-12 16:49:47 +00:00
Gabor Juhos ec26814b0e ar71xx: refresh 3.3 patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34644
2012-12-12 16:49:46 +00:00
Gabor Juhos cdfc300948 ar71xx: remove superfluous USB patches for 3.3
SVN-Revision: 34643
2012-12-12 16:49:43 +00:00
Gabor Juhos 2b378d11c8 kernel: update linux 3.6 to 3.6.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34639
2012-12-11 20:14:39 +00:00
Gabor Juhos 3cbc1a49e2 ar71xx: load ar934x_nfc driver earlier
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34589
2012-12-10 10:38:11 +00:00
Gabor Juhos 1f7ae58a2c ar71xx: ar934x_nfc: allow to control DMA data swap via platform data
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34588
2012-12-10 10:38:07 +00:00
Gabor Juhos 2581173660 kernel: update linux 3.6 to 3.6.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34578
2012-12-08 15:01:33 +00:00
Gabor Juhos 47f9b2a110 ar71xx: TP-LINK also has a family TL-WDR
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34577
2012-12-07 19:10:57 +00:00
Gabor Juhos d7ba2b4840 ar71xx: add profile and build image for TP-LINK TL-WA801N/ND
Patch-by: Amir Sagie <openwrt-devel@taproot.org.il>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34576
2012-12-07 19:10:56 +00:00
Gabor Juhos 4f5defdc3b ar71xx: switch to 3.6.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34414
2012-11-29 17:53:42 +00:00
Gabor Juhos c2f018fca2 remove common symbols from 3.6 configs
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34404
2012-11-29 15:21:41 +00:00
Gabor Juhos 1f516235ea remove common symbols from 3.3 configs
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34403
2012-11-29 15:21:35 +00:00
Gabor Juhos 3a4d0ebd5c kernel: update linux 3.6 to 3.6.8
Also refresh the affected patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34402
2012-11-29 07:42:19 +00:00
Gabor Juhos b0b994cf76 ar71xx: set pad6 cfg for AR8327 on the AP136 board
Also override the pll_1000 value. Without these settings
ethernet suffers from packet loss.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34316
2012-11-23 20:55:34 +00:00
Gabor Juhos 188908e885 ar71xx: make rb750_nand driver compatible with 3.7
Also add compatibility patches for the currently
supported kernels.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34279
2012-11-20 16:29:43 +00:00
Gabor Juhos 8194237789 ar71xx: make ar934x_nfc driver compatible with 3.7
Also add compatibility patches for the currently
supported kernels.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34278
2012-11-20 16:29:42 +00:00
Gabor Juhos 4468fd7ae4 ar71xx: refresh rb4xx_nand patch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34277
2012-11-20 15:53:17 +00:00
Gabor Juhos 46a3b818b9 ar71xx: remove buffer verification reference from rb4xx_nand.c
It is a dead code.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34276
2012-11-20 14:40:22 +00:00
Gabor Juhos 674b91ce0e ar71xx: fix GPIO function selection for AR934x
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34275
2012-11-20 14:27:17 +00:00
Gabor Juhos d833ca527d ar71xx: restore rb4xx kernel partition size to the original value
The new lzma compressed elf kernel image fits into
that, even on devices with large page NAND chips.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34274
2012-11-20 12:17:45 +00:00
Gabor Juhos 33a99ce46b ar71xx: install lzma compressed elf kernel image from wget2nand
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34273
2012-11-20 12:17:44 +00:00
Gabor Juhos 68b5aa2fdf ar71xx/image: provide lzma compressed elf kernel image
This will be used on the RB4xx/RB7xx/RB2011 boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34272
2012-11-20 12:17:43 +00:00
Gabor Juhos 97867f8717 ar71xx/image: relink loader.elf image to LOADADDR
This allows to load the resulting image directly
from RouterBOOT.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34271
2012-11-20 12:17:41 +00:00
Gabor Juhos 8e4cefc7f8 refresh all kernel configurations
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34267
2012-11-20 07:19:06 +00:00
Gabor Juhos d577d69838 ar71xx: use custom LZMA dictionary size for WNDR3700 images
Based on a patch by Hannu Nyman.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34248
2012-11-18 20:25:13 +00:00
Gabor Juhos 169e596268 ar71xx: add user-space support for the RB435G board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34240
2012-11-18 10:18:02 +00:00
Gabor Juhos d44d954dec ar71xx: add kernel support for the RB435G board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34239
2012-11-18 10:18:01 +00:00
Gabor Juhos d62bddc620 ar71xx: update PCI IRQ map for RB4xx devices
Should fix #12269.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34238
2012-11-18 09:51:04 +00:00
Gabor Juhos 31881357af ar71xx: create profile and build image for the OpenMesh MR600 board
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34237
2012-11-18 09:32:41 +00:00
Gabor Juhos 9da2c85b67 ar71xx: enable sysupgrade for the OpenMesh MR600
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34235
2012-11-18 09:32:39 +00:00
Gabor Juhos 6380301d01 ar71xx: rename om2p.sh upgrade script to openmesh.sh
It will be used on other boards as well.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34234
2012-11-18 09:32:37 +00:00
Gabor Juhos d325e622d2 scripts/om-fwupgradecfg-gen.sh: add support for the MR600
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34233
2012-11-18 09:32:36 +00:00
Gabor Juhos c3174179b7 ar71xx: add user-space support for the OpenMesh MR600 board
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34232
2012-11-18 09:32:35 +00:00
Gabor Juhos 8d4857d677 ar71xx: add kernel support for the OpenMesh MR600 board
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34231
2012-11-18 09:32:33 +00:00
Gabor Juhos 7da001d068 scripts: rename om2p-fwupgradecfg-gen.sh to more generic om-fwupgradecfg-gen.sh
It will be used for non OM2P boards as well.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34200
2012-11-14 14:18:33 +00:00
Gabor Juhos ee94ed4597 ar71xx: add profile and build image for the Ubiquiti UniFi AP-Outdoor board
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34198
2012-11-13 20:57:19 +00:00
Gabor Juhos 9c5c079329 ar71xx: add user-space support for the Ubiquiti UniFi AP-Outdoor board
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34197
2012-11-13 20:57:18 +00:00
Gabor Juhos 75c1d3ccc2 ar71xx: add support for the Ubiquiti UniFi AP-Outdoor device
[juhosg:
  - rename and refresh 660-MIPS-ath79-ubnt-xm-add-unifi-outdoor patches
  - wrap long lines in mach-ubnt-xm
  - remove default network config, set it from uci-defaults/network
    instead
  - remove user-space, and image generation stuff]

Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34196
2012-11-13 20:57:17 +00:00
Gabor Juhos 7ab0e1566f ar71xx: add profiles and build images for old PowerCloud System devices
[juhosg:
  - use 'PowerCloud Systems' instead of 'PCS' in the profiles
  - sort SingleProfile instances in image/Makefile]

Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34195
2012-11-13 20:57:15 +00:00
Gabor Juhos 62c8ff19ad ar71xx: add profile and build image for the TL-WA7510N board
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]

Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34190
2012-11-13 14:48:03 +00:00
Gabor Juhos 165b7d2173 ar71xx: user space support for the TL-WA7510N
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]

Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34188
2012-11-13 14:48:01 +00:00
Gabor Juhos 91bab828aa ar71xx: add support for TP-Link TL-WA7510N
It is mostly the same as TL-WA901N. WLAN and LAN
are working. LAN LED is working. WLAN signal
strength LEDs are not working yet.

http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n

[juhosg:
  - cleanup commit message
  - move non kernel related stuff into separate changes
  - rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch
  - merge WA7510N support into the mach-tl-wa901nd.c file
  - add 3.6 support]

Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34187
2012-11-13 14:48:00 +00:00
Gabor Juhos ce9d4fadfa ar71xx: refresh patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34186
2012-11-13 14:47:58 +00:00
Gabor Juhos e92da5e7ae ar71xx: nuke ath79_set_usb_power_gpio helper
It is no longer used.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34088
2012-11-05 13:23:28 +00:00
Gabor Juhos f2528b1792 ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34087
2012-11-05 13:23:27 +00:00
Gabor Juhos ed35253f4c ar71xx: don't use the unknown LED on the ZCN-1523-5 board
According to #12421, GPIO 1 controls the power
output on the unused lines of the LAN2 port.
Remove the LED definition in order to prevent
possible permanent hardware damage.

If someone needs that, the power-out feature can
be controlled via the GPIO sysfs interface.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34076
2012-11-04 22:08:54 +00:00
Gabor Juhos 1b744e1ca5 ar71xx: include mtd layout in the command line for ZCN-1523H-* boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34074
2012-11-04 21:12:20 +00:00
Gabor Juhos b78a736dc2 ar71xx: add missing Makefile entry for the ZCN-1523H-{2,5} boards
Also add the missing ATH79_MACH_ZCN_1523H_5 symbol.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34072
2012-11-04 20:15:18 +00:00
Gabor Juhos 7228a91a3b ar71xx: fix link speed between AR7242 and AR8327 on the RB750GL/RB751G boards
The default pll_1000 value had to be changed
in order to make it working.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33993
2012-10-29 17:24:30 +00:00
Gabor Juhos e4db63fd64 ar71xx: add initial support for 3.6
The nand subtarget is not working yet.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33983
2012-10-28 19:52:02 +00:00
Gabor Juhos a6549ac1cb ar71xx: remove NO_AUTOINCR flag from the NAND drivers
The flag is not present in 3.6.
Also add compatibility patches for 3.3.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33971
2012-10-28 12:21:15 +00:00
Gabor Juhos e2ec99889e ar71xx: ag71xx: fix build_skb arguments for 3.6
Also add a compatibility patch for 3.3

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33969
2012-10-27 17:11:06 +00:00
Gabor Juhos 3a86affcdd ar71xx: enable sysupgrade for the CAP4200AG board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33960
2012-10-27 08:55:42 +00:00
Gabor Juhos e99d557c08 ar71xx: add profile and build image for the CAP4200AG
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33958
2012-10-27 08:55:40 +00:00
Gabor Juhos 9287e0c863 ar71xx: add user-space part for the CAP4200AG
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33957
2012-10-27 08:55:39 +00:00
Gabor Juhos d54c9653e9 ar71xx: add support for the Senao CAP4200AG board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33956
2012-10-27 08:55:38 +00:00
Gabor Juhos 3b7cb4eb4a ar71xx: add ath79_wmac_disable_[25]ghz helpers
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33955
2012-10-27 08:55:37 +00:00
Gabor Juhos 269872fe1e ar71xx: use mtd_read in wrt160nl_part
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33951
2012-10-27 07:57:58 +00:00
Gabor Juhos 973eda6077 ar71xx: use mtd_read in tplinkpart
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33950
2012-10-27 07:57:57 +00:00
Gabor Juhos 28f3adc2ed ar71xx: generate 4,8,16M images for the WPE72
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33949
2012-10-27 07:57:55 +00:00
Gabor Juhos ff481a5518 ar71xx: reject TP-Link images containing a bootloader
The original TP-Link firmware images can be flashed via
the sysupgrade command, however those may contain a
bootloader. Flashing such an image via sysupgrade
bricks the board, and it can't be recovered without
a serial console.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33944
2012-10-26 18:58:13 +00:00
Gabor Juhos f1f388d527 ar71xx: rw2458n - fix flash parts
See #12338. Redwave rw2458 has uboot, not redboot.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33867
2012-10-19 18:32:49 +00:00
Gabor Juhos 7a72f01a72 ar71xx: merge machine support patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33820
2012-10-17 18:27:50 +00:00
Gabor Juhos 2e1bc1e15b ar71xx: also use the ath79_set_ar934x_eth_cfg helper for DB120
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33819
2012-10-17 18:27:48 +00:00
Gabor Juhos 31387947c8 ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routines
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33818
2012-10-17 18:27:47 +00:00
Gabor Juhos 5ffc08e3dc ar71xx: add a helper function for setting up ETH_CFG register on AR934x
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33817
2012-10-17 18:27:45 +00:00
Gabor Juhos 35a91a4fe8 ar71xx: OM2P-HS sysupgrade support
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33803
2012-10-17 08:26:05 +00:00
Gabor Juhos c5a32cfc92 ar71xx: add support for the OpenMesh OM2P-HS board
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33800
2012-10-17 08:26:01 +00:00
Gabor Juhos f1283d8583 ar71xx: fix sysupgrade for jjPlus JWAP003
[juhosg: change commit message]

Signed-off-by: Artur Wronowski <arteqw@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33769
2012-10-14 16:24:26 +00:00
Gabor Juhos 1944f7b916 ar71xx: ew-dorin: added ethernet switch configuration
Signed-off-by: embedded wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33768
2012-10-14 16:24:25 +00:00