Commit Graph

48 Commits (29b69e840a44fad518d9d9ecd93966d0d2a4f076)

Author SHA1 Message Date
Christian Lamparter 1aa00f9d13 brcm2708: boot-part feature integration
This patch adds the boot-part feature which enables the brcm2708
target move from the custom boot partition size config option to
the generic CONFIG_TARGET_KERNEL_PARTSIZE.

Note:
For people using custom images: Just like with
CONFIG_TARGET_ROOTFS_PARTSIZE changing the value
can cause sysupgrade to repartition the device!
Make sure to have a backup in this case.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-01-24 15:53:02 +01:00
Daniel F. Dickinson 3bb44f4299 brcm2708: Add feature flag rootfs-part
Even with squashfs brcm2708 requires ROOTFS_PART_SIZE because the overlay
exists as a loopback device on the space not used by squashfs in the root
partition. Also for ext4 (the other fs option) ROOTFS_PART_SIZE is required,
so use feature flag rootfs-part to enable it.

Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
2018-12-27 14:06:38 +01:00
Stijn Tintel 8c6662a1ac brcm2708: switch to kernel 4.14
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-12-18 23:19:22 +02:00
Daniel Golle 037ef13a16 brcm2708: move wifi calibration EEPROMs out of base-files
Ship EEPROM blobs for specific supported board only and don't have them
lurking around in our source tree but rather download them from
@github/RPi-Distro/firmware-nonfree upstream.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-06-14 18:15:33 +02:00
Daniel Golle a2f17214cd brcm2708: add brcmfmac-firmware-43455-sdio to DEFAULT_PACKAGES
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-06-14 13:54:17 +02:00
Christian Lamparter 707b6c815b brcm2708: add squashfs rootfs image
This patch adds a image with squashfs as the root filesystem.
A rootfs_data partition will be generated on the first boot
and placed inside the rootfs partition (just after the squashfs
image).

advantages:
 - it is possible to migrate from an existing -ext4
   installation and back via sysupgrade.
 - existing partition layout will not be lost.
 - slightly smaller image size.
 - support for attendedsysupgrade

disadvantages:
 - needs f2fs + tools as well. This is because fs-tools decides on the
   blocksize of the sdcard. So either f2fs or ext4 can get choosen as
   the rootfs_data filesystem (depends on the size of the root partition).
 - rootfs_data is placed into the rootfs partition. This makes
   it difficult for tools that expect a /dev/mmc0pX device.
   It also makes it difficult for data recovery tools since they
   might not expect to find a embedded partition or will be
   confused.

For people with existing build configurations: make sure to include mkf2fs
and f2fsck package into the image... Otherwise the new -squashfs image will
boot of a ram-overlay and won't keep the configurations after a reboot.

Cc: Álvaro Fernández Rojas <noltari@gmail.com>
Cc: Paul Spooren <spooren@informatik.uni-leipzig.de>
Cc: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>
2018-05-18 09:17:49 +02:00
Álvaro Fernández Rojas 6debeaab45 brcm2708: add support for the new Raspberry Pi Zero W
Support is experimental since I haven't got any device to test.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-03-04 19:41:34 +01:00
Felix Fietkau 9467ce42da build: get rid of host.mk
Defined required host related variables in toplevel.mk instead

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-26 13:31:44 +01:00
Álvaro Fernández Rojas ada91d8a24 brcm2708: switch to linux 4.9
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-07 23:00:18 +01:00
Felix Fietkau aa53f78038 build: fix subtarget descriptions
Move Target/Description above the target.mk include

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-04 13:35:11 +02:00
Álvaro Fernández Rojas ece009dbf1 brcm2708: take over maintainership
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-08 19:08:02 +02:00
John Crispin 993989880a brcm2708: add Raspberry Pi 3 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48967
2016-03-08 18:11:55 +00:00
John Crispin b3dc9566a4 brcm2708: switch to linux 4.4 and update patches
As usual these patches were extracted from:
https://github.com/raspberrypi/linux/commits/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48765
2016-02-25 10:14:01 +00:00
John Crispin 1f51472346 brcm2708: enable hard float ABI
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47562
2015-11-21 21:25:13 +00:00
John Crispin b97498ab29 brcm2708: switch device tree compilation to linux
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47124
2015-10-05 10:27:34 +00:00
John Crispin f7ac790356 brcm2708: switch to linux 4.1
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46402
2015-07-17 12:49:09 +00:00
John Crispin 2de7910102 brcm2708: Implement sysupgrade
Implement sysupgrade for Raspberry Pi, similar to the way it is done on x86:
The config files are saved in the boot partition and moved to where they are
normally expected in preinit.

Also add optional gzip compression for the SD card image, since this can save
a lot of space (76M vs 6M), also similar to x86.

Signed-off-by: Bruno Randolf <br1@einfach.org>

SVN-Revision: 46347
2015-07-14 07:39:10 +00:00
John Crispin eaec1e41b1 brcm2708: add missing SUBTARGETS:= to makefile
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44405
2015-02-11 13:09:39 +00:00
John Crispin cafc77f74c brcm2708: add Raspberry Pi 2 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44403
2015-02-11 13:05:31 +00:00
John Crispin 408c969626 brcm2708: update to v3.18
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44392
2015-02-11 10:17:55 +00:00
Felix Fietkau c288d2d6d9 kernel: makefiles: make use of new var KERNEL_PATCHVER
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43047
2014-10-24 19:34:02 +00:00
Felix Fietkau f35da063bc targets: remove useless quotes around KERNELNAME
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42780
2014-10-05 20:17:19 +00:00
Florian Fainelli 54a18b3fe8 brcm2708: switch to 3.14
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42681
2014-09-27 19:11:55 +00:00
John Crispin ba63338d3f kernel: update to 3.10.49 Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41776
2014-07-20 17:31:11 +00:00
John Crispin 994e5ce2f9 kernel: update 3.10.36->3.10.44
205-fix-headers_install.patch is obseleted by upstream commit 3246a0352e3d58380b9386570f1db1faf7edf8a8

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41351
2014-06-26 13:47:42 +00:00
Gabor Juhos d2812cb036 kernel: update 3.10 to 3.10.36
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40467
2014-04-12 11:59:07 +00:00
Gabor Juhos 627baa28d3 kernel: update 3.10 to 3.10.34
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40291
2014-03-27 09:28:33 +00:00
Florian Fainelli 2d32b2f771 brcm2708: define KERNELNAME accordingly
Define KERNELNAME to Image to get the build system to copy this image
over $(KDIR) automatically for us.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39768
2014-02-28 20:29:40 +00:00
Gabor Juhos f677b1bc7e kernel: update 3.10 to 3.10.32
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39707
2014-02-23 10:59:40 +00:00
Gabor Juhos a2543d72d8 kernel: update 3.10 to 3.10.28
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39399
2014-01-26 11:30:34 +00:00
Gabor Juhos 0e2586a774 kernel: update 3.10 to 3.10.26
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39220
2014-01-11 16:06:37 +00:00
Hauke Mehrtens 952db22551 kernel: update kernel 3.10 to 3.10.24
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39059
2013-12-15 19:16:30 +00:00
Gabor Juhos f1ef0b92be kernel: update 3.10 to 3.10.21
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38972
2013-12-01 09:59:53 +00:00
Gabor Juhos 35656042f1 kernel: update 3.10 to 3.10.18
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38652
2013-11-05 08:25:45 +00:00
Gabor Juhos b6b06000eb kernel: update 3.10 to 3.10.17
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38506
2013-10-23 12:51:05 +00:00
Hauke Mehrtens 81e2f00367 kernel: update kernel to 3.10.15
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38384
2013-10-13 19:28:29 +00:00
Gabor Juhos 9c8a5ef115 kernel: update 3.10 to 3.10.13
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38228
2013-09-27 07:19:21 +00:00
Felix Fietkau c8609ab4f8 build: unify arm target cflags
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38211
2013-09-26 17:53:20 +00:00
Gabor Juhos 554772a665 kernel: update 3.10 to 3.10.12
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38000
2013-09-15 16:00:41 +00:00
Gabor Juhos d120ec18b2 kernel: update 3.10 to 3.10.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37890
2013-09-02 19:12:54 +00:00
Gabor Juhos 043edd8074 kernel: update 3.10 to 3.10.9
Also refresh 3.10 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37832
2013-08-23 17:31:04 +00:00
Felix Fietkau 28d03a9983 kernel: update remaning platforms accidentally left out of r37617
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37619
2013-07-30 08:00:25 +00:00
Gabor Juhos e9688455f6 kernel: update 3.10 to 3.10.3
Also refresh 3.10 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37546
2013-07-26 07:19:58 +00:00
Gabor Juhos ef944dcb85 kernel: update 3.10 to 3.10.2
Also refresh 3.10 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37502
2013-07-22 15:31:13 +00:00
Hauke Mehrtens 06accca1d7 kernel: update to kernel 3.10.1 and refresh patches
SVN-Revision: 37275
2013-07-13 22:45:09 +00:00
Florian Fainelli 44d22771ae brcm2708: update maintainership
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37220
2013-07-09 20:53:13 +00:00
Florian Fainelli 15da5cfcdb brcm2708: switch to 3.10 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37219
2013-07-09 20:53:08 +00:00
John Crispin 0e9e7dcd10 adds target used by rapsberry pi
Add support for Raspberry Pi / brcm2708 / 2835

Signed-off-by: Ian Ridge <ianridge [at] gmail.com>

SVN-Revision: 32825
2012-07-24 20:39:17 +00:00