Commit Graph

1521 Commits (27fea0b6d7ee3bfebfac2ed860dbd4bdaff7a0b1)

Author SHA1 Message Date
Gabor Juhos 27fea0b6d7 ar71xx: correctly detect NETGEAR WNDRMAC
This patch helps properly detect a WNDRMAC device. Before this
patch the model is detected as "NETGEAR ?????????N".

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>

SVN-Revision: 32453
2012-06-19 10:13:38 +00:00
Gabor Juhos ee9bc123fb ar71xx: add USB LED support by default for WNDR3700/WNDR3800/WNDRMAC
This adds kmod-leds-wndr3700-usb package to a default build for
WNDR3700, WNDR3800 and WNDRMAC in order to support the green USB LED.

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>

SVN-Revision: 32452
2012-06-19 10:13:37 +00:00
Felix Fietkau 26cf21df02 ar71xx: add support for the embeddedwireless Dorin board (based on patch by embeddedwireless.de)
SVN-Revision: 32447
2012-06-19 00:22:04 +00:00
Felix Fietkau 5d364d0ca1 ar71xx: add support for reading the MAC address from OTP ROM on AR933x
SVN-Revision: 32446
2012-06-19 00:21:58 +00:00
Felix Fietkau dddf321b6e ar71xx: swap the PHY address of the ethernet port of TL-MR3040/TL-MR11U similar to TL-MR3020 to fix ethernet link detection
SVN-Revision: 32336
2012-06-13 12:54:22 +00:00
Felix Fietkau 624505df56 ar71xx: fix LZMA loader build regression from r32090 (thx, juhosg)
SVN-Revision: 32095
2012-06-06 19:37:49 +00:00
Felix Fietkau 73b8805e78 ar71xx: fix PHY setup on TL-MR3020 (fixes #11572)
SVN-Revision: 32093
2012-06-06 17:24:12 +00:00
Felix Fietkau dc9675282e ar71xx: add a helper function for setting up PHY4 swapping on ar933x
SVN-Revision: 32092
2012-06-06 17:24:09 +00:00
Felix Fietkau 02ab0d3ef9 ar71xx: only build all loader images if the image builder is enabled - saves some time on make target/install
SVN-Revision: 32090
2012-06-06 17:24:01 +00:00
John Crispin a4d96aae8d bump to 3.3.8
SVN-Revision: 32055
2012-06-05 06:57:51 +00:00
Luka Perkov 7f00e5ffc6 uboot-envtools: update to 2012.04.01
SVN-Revision: 32051
2012-06-04 21:55:49 +00:00
Gabor Juhos cd7ab1d30b ar71xx: add default LED setup for the DB120 board
SVN-Revision: 31997
2012-05-29 16:39:23 +00:00
Gabor Juhos 4e40bdc190 ar71xx: use the generic uci-default functions for initial LED setup
SVN-Revision: 31992
2012-05-29 16:39:17 +00:00
Felix Fietkau a9cd8446f3 ar71xx: do not override the mdio clock for ar9330. the override value (obtained from an atheros driver) seems to break ethernet functionality
SVN-Revision: 31956
2012-05-28 20:39:50 +00:00
Felix Fietkau 367e4b3994 ar71xx: improve rx performance of the ethernet driver by using build_skb to deliver a cache-hot skb to the network stack
SVN-Revision: 31934
2012-05-28 02:55:59 +00:00
Felix Fietkau 8039a1bbb2 ar71xx: fix MII clock settings for various chips, improves ethernet stability on AR934x
SVN-Revision: 31925
2012-05-27 21:02:41 +00:00
Gabor Juhos 8865f0923e ar71xx: fix TL-WR1041 image size
SVN-Revision: 31923
2012-05-27 17:21:47 +00:00
Gabor Juhos 2ae5581447 kernel: update linux 3.3 to 3.3.7
SVN-Revision: 31848
2012-05-23 21:05:32 +00:00
Gabor Juhos c57409e79d ar71xx: fix an insignificant typo
Patch from #11485.

SVN-Revision: 31847
2012-05-23 21:05:30 +00:00
Gabor Juhos 013f434f5b ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD
Patch by Kamil Trzciński <ayufan@osk-net.pl>

SVN-Revision: 31846
2012-05-23 21:05:25 +00:00
Gabor Juhos 758f670376 ar71xx: add support for TP-Link TL-MR3040
Support for TP-Link TL-MR3040. Power LED not working - always on red, after
start should be green.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 31845
2012-05-23 21:05:24 +00:00
Gabor Juhos 39994008cb linux: move certain disabled symbols to the generic configs
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
2012-05-15 10:58:52 +00:00
Felix Fietkau a3f2fd187b ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet)
SVN-Revision: 31736
2012-05-15 10:36:39 +00:00
Gabor Juhos b472e5d12e kernel: update linux 3.3 to 3.3.6
SVN-Revision: 31709
2012-05-14 09:18:32 +00:00
Gabor Juhos 93c9980b94 ar71xx: fix build error if PCI is disabled
SVN-Revision: 31646
2012-05-07 21:16:22 +00:00
Gabor Juhos 34018a630f kernel: update linux 3.3 to 3.3.5
SVN-Revision: 31645
2012-05-07 20:11:43 +00:00
Felix Fietkau 0ff3c396d3 kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes
SVN-Revision: 31637
2012-05-06 21:19:14 +00:00
Gabor Juhos 9486904079 ar71xx: add profile and build image for the TL-WR1041N v2 board
Patch-by: Vince Huang <axishero@foxmail.com>

SVN-Revision: 31610
2012-05-05 17:02:41 +00:00
Gabor Juhos ab897ab04e ar71xx: add support for the TP-Link TL-WR1041N v2 board
Patch-by: Vince Huang <axishero@foxmail.com>

SVN-Revision: 31608
2012-05-05 17:02:35 +00:00
Gabor Juhos 56f2e08537 ar71xx: update 3.3 patches
SVN-Revision: 31602
2012-05-05 13:56:35 +00:00
Gabor Juhos 8fffc6d6df ar71xx: fix a typo in the db120 mach file
Reported-by: Sven Eckelmann <sven@narfation.org>

SVN-Revision: 31601
2012-05-05 13:56:30 +00:00
Gabor Juhos cbfce53831 kernel: update linux 3.3 to 3.3.4
SVN-Revision: 31541
2012-04-30 08:38:11 +00:00
Gabor Juhos 3e3a4d3d6b ar71xx: allow to disable link polling on unused PHYs
SVN-Revision: 31533
2012-04-29 18:29:24 +00:00
Gabor Juhos a447f1810c ar71xx: enable MIB counters in the built-in switch of the AR934x
SVN-Revision: 31476
2012-04-25 13:02:11 +00:00
Gabor Juhos 59b0c1b2b9 ar71xx: TL-WR741NDv4: add WLAN LED config
On TP-Link TL-WR741ND version 4, the WLAN LED must be configured to work.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 31461
2012-04-24 11:38:44 +00:00
Jonas Gorski 8fd383ae2e kernel: update linux 3.3 to 3.3.3
SVN-Revision: 31460
2012-04-24 09:25:38 +00:00
Gabor Juhos 9140d4ee44 ar71xx: remove duplicated AP121 Kconfig entry
SVN-Revision: 31382
2012-04-20 16:50:16 +00:00
Gabor Juhos da2cc2c79a ar71xx: nuke 3.2 support
SVN-Revision: 31360
2012-04-19 21:32:05 +00:00
Gabor Juhos 9854d6fb7f ar71xx: switch to 3.3.2
SVN-Revision: 31359
2012-04-19 21:31:58 +00:00
Gabor Juhos a6b4b5fd6e ar71xx: sync 3.3 config
SVN-Revision: 31358
2012-04-19 21:31:53 +00:00
Gabor Juhos ef97415b92 ar71xx: merge/reorganize 3.3 patches
SVN-Revision: 31357
2012-04-19 21:31:50 +00:00
Gabor Juhos 408de85883 ar71xx: use ap91_pci_init for RB751{,G}
SVN-Revision: 31356
2012-04-19 21:31:48 +00:00
Gabor Juhos 0a9832b50d ar71xx: move USB device registration directly into rb751{,g}_setup
SVN-Revision: 31355
2012-04-19 21:31:43 +00:00
Gabor Juhos 78967e6640 ar71xx: add ap9x_pci_get_wmac_data helper
SVN-Revision: 31354
2012-04-19 21:31:42 +00:00
Gabor Juhos 5c9ca38e47 ar71xx: add sanity checks to decode_rle
Also use -EINVAL instead of -1.

SVN-Revision: 31353
2012-04-19 21:31:40 +00:00
Jonas Gorski a8f2bc682e kernel: also update the targets to use 3.2.15
Thanks Gabor for spotting it.

SVN-Revision: 31337
2012-04-17 13:12:14 +00:00
Jonas Gorski 3a9b6dc313 kernel: update linux 3.3 to 3.3.2
SVN-Revision: 31336
2012-04-17 12:51:02 +00:00
Jonas Gorski 16b4cbcdd6 kernel: update linux 3.2 to 3.2.14
SVN-Revision: 31222
2012-04-09 14:48:51 +00:00
Gabor Juhos f14fd53e3c ar71xx: image: build initramfs images for the WHR boards
SVN-Revision: 31209
2012-04-06 06:45:08 +00:00
Gabor Juhos e295a077ce ar71xx: initial support for Mikrotik RB751G-2HnD and RB751U-2HnD
Great collaboration on these two fantastic routers on the openwrt forum:
https://forum.openwrt.org/viewtopic.php?id=32320
Above all kudos to aryufan. Well done and thank you everyone else who
contributed.

To-Do: LED for wlan is not yet activated
To-Do: TxPower over 20dBm (RB751U) or 22dBm (RB751G) are not accepted by
the router

Signed-off-by: Hanno Schupp <hanno.schupp@gmail.com>
[juhosg: fix line wrapped patch, fix checkpatch errors, add missing
kernel patches]

SVN-Revision: 31208
2012-04-06 06:45:07 +00:00