Commit Graph

16103 Commits (2201a230a9872cfe2fa1733b66742dea5cb816e6)

Author SHA1 Message Date
Gabor Juhos e110321fce generic: rtl8366: make rtl8366_{g,s}et_pvid static
SVN-Revision: 22198
2010-07-15 13:05:29 +00:00
Gabor Juhos e561b18521 generic: rtl8366: add common rtl8366_sw_{get,set}_port_pvid functions
SVN-Revision: 22197
2010-07-15 13:05:25 +00:00
Gabor Juhos 534480d3fb generic: rtl8366: add setup to rtl8366_smi_ops struct
SVN-Revision: 22196
2010-07-15 13:05:21 +00:00
Gabor Juhos b093cec6cc generic: rtl8366: introduce rtl8366_smi_alloc
SVN-Revision: 22195
2010-07-15 13:05:16 +00:00
Gabor Juhos c7bc8fb46c generic: rtl8366: get rid of private rtl8366{s,rb} structs
SVN-Revision: 22194
2010-07-15 13:05:10 +00:00
Gabor Juhos 008c81b859 generic: rtl8366: move switch device to the rtl8366_smi struct
SVN-Revision: 22193
2010-07-15 13:05:06 +00:00
Gabor Juhos 5508b23aaf generic: rtl8366: get rid of private vlan_{mc,4k} structs
The usage of bitfields causes problems in Little-Endian mode. Remove
them and manipulate the bits directly in the appropriate functions. This
change also reduces the size of the binary a bit.

SVN-Revision: 22192
2010-07-15 13:05:02 +00:00
Gabor Juhos 540b3e6419 generic: rtl8366: use SWITCH_TYPE_NOVAL for reset_mib attributes
SVN-Revision: 22191
2010-07-15 13:04:57 +00:00
Gabor Juhos 84df6b3728 madwifi: in-flash macs for mach-eap7660d
This patch makes madwifi respect (at least) the platform_data
supplied MAC address.

Signed-off-by: Daniel Golle <daniel.golle@gmail.com>

SVN-Revision: 22190
2010-07-15 07:37:00 +00:00
Gabor Juhos 4bb11f9a39 generic: move ath5k_platform.h from ar71xx to generic files
SVN-Revision: 22189
2010-07-15 07:36:58 +00:00
Gabor Juhos 3f4e29691e ath5k: in-flash macs and eeprom for mach-eap7660d
This adds ath5k_platform.h to mac80211 and patches ath5k to respect
MAC addresses and eeprom content from platform_data, if supplied.

Signed-off-by: Daniel Golle <daniel.golle@gmail.com>

SVN-Revision: 22188
2010-07-15 07:36:55 +00:00
Gabor Juhos 95e09cccd8 ar71xx: in-flash macs and eeprom for mach-eap7660d
This adds in-flash mac-addresses and calibration data for the Senao
EAP7660D board.

Signed-off-by: Daniel Golle <daniel.golle@gmail.com>

SVN-Revision: 22187
2010-07-15 07:36:52 +00:00
Daniel Dickinson 17ba48cd90 target (base-files): Fixed failsafe mode by adding back insmod diag
SVN-Revision: 22186
2010-07-15 02:46:03 +00:00
Felix Fietkau ac5279e6bc enable ipv6 support for packages by default
SVN-Revision: 22176
2010-07-13 18:45:29 +00:00
Jo-Philipp Wich c08ea36e81 broadcom-wl: fix md5sums
SVN-Revision: 22175
2010-07-13 17:21:44 +00:00
Jo-Philipp Wich abdf25b045 add required exports for wl.ko
SVN-Revision: 22174
2010-07-13 17:03:56 +00:00
Jo-Philipp Wich 4ae595a3aa broadcom-wl: - update to v5.10.56.27.3 - get fallback SPROM from SSB if neither on-device SPROM nor nvram is available - working brcm63xx support
SVN-Revision: 22173
2010-07-13 16:55:57 +00:00
Gabor Juhos d14e9e706e ramips: Fix bridging in ramips ethernet driver
Bridging between the ramips ethernet driver and rt2800pci was somewhat
broken. Frames received by the ethernet driver which were passed to the
wifi driver for transmission were sometimes corrupted or sent out with
huge delays.

The reason for this is the missing assignment of skb->tail in the ramips
ethernet driver's rx path resulting in skb->tail pointing to skb->data.
Since skb->tail is used by mac80211 it writes into skb->data which messes
up the frames content.

Fix this by using skb_put to correctly set skb->len and skb->tail.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 22172
2010-07-13 16:52:07 +00:00
Gabor Juhos 27375c5139 ramips: protect GPIO register access with a spinlock
SVN-Revision: 22171
2010-07-13 16:52:04 +00:00
Gabor Juhos 9ee8b1f8c6 ramips: sync kernel config
SVN-Revision: 22170
2010-07-13 16:52:02 +00:00
Gabor Juhos a06400d432 tools/firmware-utils: enhance mktplinkfw utility
Attached patch enhances the mktplinkfw utility:
1. existing firmware files in TP-Link format can now be inspected, showing eg. the used offsets
2. optionally the kernel and rootfs parts can be extracted (saves calculations for dd)
3. when generating firmwares, kernel entry point, load address and rootfs offset can be overwritten (for experienced users)

Patch-by: Pieter "Fate" Hollants <pieter@hollants.com>

SVN-Revision: 22169
2010-07-13 16:51:59 +00:00
Jo-Philipp Wich 9978dd7637 export SSB fallback SPROM - required for wl.ko
SVN-Revision: 22168
2010-07-13 16:20:29 +00:00
Felix Fietkau d0e2e4f693 mac80211: improve reliability of the keymiss handling fix, add another aggregation leak fix
SVN-Revision: 22152
2010-07-12 19:16:22 +00:00
Daniel Dickinson b9dfb5d483 block-mount: Attempt swapon a after mounting as well as before. This ensures that swap on a filesystem is enabled.
SVN-Revision: 22150
2010-07-12 17:28:50 +00:00
Daniel Dickinson 117590a2ce block-mount: Fixed two bugs in fstab.init. /etc/fstab was used where /tmp/fstab should have been, and locking was insufficiently careful and was such that it could result in deadlock when hotplug was in use.
SVN-Revision: 22148
2010-07-12 16:35:39 +00:00
Daniel Dickinson b6d521ea33 block-mount: Enable swap before doing fsck so that large filesystem checks have swap as well as memory (as they take large memory for large partitions). Closes #7599.
SVN-Revision: 22147
2010-07-12 16:25:09 +00:00
Nicolas Thill 5cc5f15047 partially revert [22145], keep LINUX_KMOD_SUFFIX, needed to build external modules in ./packages
SVN-Revision: 22146
2010-07-12 16:01:13 +00:00
Claudio Mignanti 2d86ea7bf3 massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950
SVN-Revision: 22145
2010-07-12 14:06:13 +00:00
Claudio Mignanti bbcb9de935 Add package for gpio rotary encoder
SVN-Revision: 22144
2010-07-12 13:20:04 +00:00
Claudio Mignanti 828919b2ba Add package for gpio-pwm
SVN-Revision: 22143
2010-07-12 13:20:01 +00:00
Claudio Mignanti 86f3d57a00 pwm: use coherent naming to avoid conflicts
SVN-Revision: 22142
2010-07-12 13:19:57 +00:00
Hauke Mehrtens 88eb1b7ad0 kernel: modules names changed with kernel 2.6.35
SVN-Revision: 22139
2010-07-11 19:39:30 +00:00
Hauke Mehrtens 9aa7a94047 broadcom-wl: fix compiling with kernel 2.6.35
SVN-Revision: 22138
2010-07-11 19:33:46 +00:00
Hauke Mehrtens 02a147de0c kernel: fix build problems with recent kernel versions
SVN-Revision: 22137
2010-07-11 19:00:23 +00:00
Hauke Mehrtens 91ce82ef77 kernel: Add missing kernel config options
SVN-Revision: 22136
2010-07-11 18:52:30 +00:00
Hauke Mehrtens d6e8db7e6a kernel: add missing dma_dev member to struct ssb_device to make b43/b43legacy compile with current mac80211 version
SVN-Revision: 22135
2010-07-11 18:50:55 +00:00
Felix Fietkau 58232503a9 ath9k: remove support for hardware which was never sold. reduces binary size by ~30k
SVN-Revision: 22134
2010-07-11 15:19:43 +00:00
Claudio Mignanti 6a46e15720 kmod-usb-core is buildin on etrax target
SVN-Revision: 22130
2010-07-11 12:27:11 +00:00
Claudio Mignanti 07ccad1f99 enable usb support by default.
SVN-Revision: 22129
2010-07-11 12:27:09 +00:00
Claudio Mignanti ba56a699a9 add defautl config for eth0
SVN-Revision: 22128
2010-07-11 12:27:05 +00:00
Felix Fietkau b28b2b9590 ath9k: improve reliability of the noise floor calibration
SVN-Revision: 22126
2010-07-11 11:56:18 +00:00
Claudio Mignanti 581dfd912c fix typo in Makefile tgz -> targz
SVN-Revision: 22125
2010-07-11 09:53:00 +00:00
Felix Fietkau 99698373f9 ath9k: add another batch of stability updates and misc fixes
SVN-Revision: 22123
2010-07-11 03:50:46 +00:00
Hauke Mehrtens 3310fdf6fa brcm47xx: use kernel 2.6.34.1 as default kernel
SVN-Revision: 22119
2010-07-10 22:40:45 +00:00
Hauke Mehrtens e2ce2feedb kernel: update to kernel 2.6.34.1
SVN-Revision: 22118
2010-07-10 22:39:52 +00:00
Felix Fietkau 9c8d55541a brcm47xx: fix a small copy&paste error in the b44 fix for 2.6.34 and 2.6.35
SVN-Revision: 22116
2010-07-10 12:17:41 +00:00
Felix Fietkau c788e49ab7 broadcom-diag: detect more variants of SimpleTech SimpleShare
SVN-Revision: 22112
2010-07-10 00:51:28 +00:00
Felix Fietkau fbff44c98a Get rid of the b44 'BUG! Timeout waiting for bit 80000000 of register 428 to clear.' spam.
more and more users are getting confused by this, and consider it a regression in brcm47xx,
because brcm-2.4 was not showing this message. It's not particularly interesting for debugging,
most of the time it only happens because of an unconnected port.

SVN-Revision: 22110
2010-07-10 00:48:37 +00:00
Claudio Mignanti 482557bc88 fix a bug inside usb driver, thanks to Jesper Nilsson
SVN-Revision: 22105
2010-07-09 10:58:44 +00:00
Claudio Mignanti 63a7fad924 add some missing symbols
SVN-Revision: 22104
2010-07-09 10:58:40 +00:00