Commit Graph

235 Commits (202fb45debb80148c280275e299d90475d032490)

Author SHA1 Message Date
Luka Perkov 7f00e5ffc6 uboot-envtools: update to 2012.04.01
SVN-Revision: 32051
2012-06-04 21:55:49 +00:00
John Crispin 2b4ef2eafa adds unset Kbuild symbol
SVN-Revision: 32026
2012-06-02 14:03:32 +00:00
John Crispin 47ef62d1b8 adds patch to make Tantos (psb6970) switch buildable again
SVN-Revision: 32006
2012-05-30 17:41:28 +00:00
Gabor Juhos ff74305623 lantiq: use the generic uci-default functions for initial LED setup
SVN-Revision: 31995
2012-05-29 16:39:21 +00:00
John Crispin f567980d38 move files-3.3 -> files
SVN-Revision: 31912
2012-05-27 16:13:02 +00:00
John Crispin 8002770520 3.2 R.I.P.
SVN-Revision: 31911
2012-05-27 16:12:59 +00:00
John Crispin 81ddc886e1 dgn3500 support with eeprom loading from sysfs
WIFI eeprom:
As discussed, it is impossible for nand and spi flash platforms to have the eeprom data available from mtd. I suggested to load the eeprom from user-space. I've looked into regular firmware loading but this is only possible when using modules.  I've created a sysfs entry that allows reading and writing the eeprom data to the platform data. After loading the eeprom data I rely on pci-hotplug support to disable the bogus pci device and rescan the bus (with fixups and all). Because hotplug is not available, an init script is created that performs the copy from mtd to platform data. I think it is best to eventually move the sysfs functions to dev_wifi_athxk.c file, this would get rid of the external to the ath9k platform data.

SPI flash:
It seems that the spi-xway driver is not really working. It causes my kernel to crash in all sorts of ways. I added to bitbang SPI to be able to the calibration data mention above.
I've kept the original mtd partitioning that Netgear uses.

Buttons/LED:
Both buttons are working properly. Two leds are not enabled: The red internet led is connected to the pci_gnt1 pin... I can't disable it because then DMA stops working.
The green wifi led is connected to an unknown atheros gpio.

Signed-off-by: Pieter Voorthuijsen <p.voorthuijsen at gmail.com>

SVN-Revision: 31910
2012-05-27 16:02:22 +00:00
John Crispin 6e8fe84472 fixes zyxel p2601hnfx
moves the linux partition, removes the config partition and the
buttons settings have small adjustments.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31909
2012-05-27 16:02:20 +00:00
John Crispin 3f2f50c681 Add basic configuration for new board ZTE H201L. Still missing are button and led gpio values.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31908
2012-05-27 16:02:16 +00:00
Gabor Juhos 2ae5581447 kernel: update linux 3.3 to 3.3.7
SVN-Revision: 31848
2012-05-23 21:05:32 +00:00
Felix Fietkau 9037c2ccc6 lantiq: allow platforms with rt2x00 to override the mac address without overriding eeprom, fixes bogus wlan mac address on arv4520
SVN-Revision: 31835
2012-05-20 21:58:03 +00:00
Gabor Juhos 39994008cb linux: move certain disabled symbols to the generic configs
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
2012-05-15 10:58:52 +00:00
John Crispin 364f47e454 code style cleanup of the mach files
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31735
2012-05-15 09:38:05 +00:00
John Crispin 07dca108a9 adds zyxel p2601hnfx support
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31734
2012-05-15 09:38:02 +00:00
John Crispin 9785ec070e set 3.3.6 as default
SVN-Revision: 31733
2012-05-15 09:37:59 +00:00
John Crispin c61ada1db8 set 3.3.5 as default
SVN-Revision: 31718
2012-05-14 16:11:26 +00:00
Gabor Juhos b472e5d12e kernel: update linux 3.3 to 3.3.6
SVN-Revision: 31709
2012-05-14 09:18:32 +00:00
John Crispin dc4cfd3a64 Add 3.3 config files
SVN-Revision: 31672
2012-05-09 12:52:24 +00:00
John Crispin 75827c538d Add missing 3.3 patches
SVN-Revision: 31671
2012-05-09 12:52:21 +00:00
John Crispin 7d638fbb2f Drop 2.6.32 support
SVN-Revision: 31670
2012-05-09 12:52:19 +00:00
Gabor Juhos 34018a630f kernel: update linux 3.3 to 3.3.5
SVN-Revision: 31645
2012-05-07 20:11:43 +00:00
Felix Fietkau 0ff3c396d3 kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes
SVN-Revision: 31637
2012-05-06 21:19:14 +00:00
Gabor Juhos cbfce53831 kernel: update linux 3.3 to 3.3.4
SVN-Revision: 31541
2012-04-30 08:38:11 +00:00
Jonas Gorski 22b4e6b882 kernel: update linux 3.2 to 3.2.16
SVN-Revision: 31459
2012-04-24 09:25:35 +00:00
John Crispin d4f3677cba Adding wifi eeprom extract for ARV752DPW - Easybox 802
Signed-off-by: Christian Rustmeier <rustmeier a.t. gmail dotty com>

SVN-Revision: 31443
2012-04-23 09:40:37 +00:00
Mirko Vogt 87cdc0dd5b change /etc/config/network according to actual VLAN config to enable LAN port 4 on the ARV4520PW board
The VLAN mapping on the ARV4520PW board is the following:

port on Router: | VLAN in software:
LAN 1           | 3
LAN 2           | 2
LAN 3           | 1
LAN 4           | 0
DSL             | 4

So LAN4 is not VLAN4 but VLAN0 (VLAN4 is DSL port) -> set "3 2 1 0 5t" as default switch config.

SVN-Revision: 31391
2012-04-21 08:07:21 +00:00
Jonas Gorski a8f2bc682e kernel: also update the targets to use 3.2.15
Thanks Gabor for spotting it.

SVN-Revision: 31337
2012-04-17 13:12:14 +00:00
Jonas Gorski 3a9b6dc313 kernel: update linux 3.3 to 3.3.2
SVN-Revision: 31336
2012-04-17 12:51:02 +00:00
Jonas Gorski ee4c47a134 kernel: update linux 3.2 to 3.2.15
SVN-Revision: 31335
2012-04-17 12:50:54 +00:00
John Crispin 83948d6385 adds 3.3 patches and files
SVN-Revision: 31307
2012-04-16 12:31:48 +00:00
John Crispin e3889bcf7c update 3.2 patches
sync with lantiq kernel series

SVN-Revision: 31260
2012-04-12 12:33:56 +00:00
Jonas Gorski 16b4cbcdd6 kernel: update linux 3.2 to 3.2.14
SVN-Revision: 31222
2012-04-09 14:48:51 +00:00
John Crispin da3f3f8f9d add Easybox 802 - ARV752DPW
Implements the ARV752DPW architecture in mach-arv.c

Signed-off-by: Christian Rustmeier <rustmeier@gmail.com>

SVN-Revision: 31206
2012-04-05 20:03:21 +00:00
John Crispin 94af65db49 enable usb on dgn3500
A power-enable toggle gpio is not available, it is always on and protected with a resettable fuse.

Signed-off-by: Pieter Voorthuijsen<p.voorthuijsen at gmail.com>

SVN-Revision: 31205
2012-04-05 20:03:19 +00:00
Jonas Gorski d87efd8c3c kernel: update linux 3.2 to 3.2.13 and refresh patches
Also remove a duplicate patch from lantiq (already in generic).

SVN-Revision: 31158
2012-04-01 07:56:55 +00:00
Felix Fietkau 5f799a0e97 ath9k: make endian check optional
Turns out it triggers on some AR71xx devices where no swapping should be done.
Enable endian check for the lantiq target.

SVN-Revision: 31084
2012-03-27 13:21:53 +00:00
John Crispin b982e8166b cleanup atheros wifi handling
Signed-off-by: Andrej Vlašić <andrej.vlasic0@gmail.com>
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31064
2012-03-25 08:50:38 +00:00
John Crispin 5ea100c39b cleanup image makefile
SVN-Revision: 31063
2012-03-25 08:50:32 +00:00
John Crispin f27c030141 update /etc/uci-defaults/*
SVN-Revision: 31062
2012-03-25 08:50:30 +00:00
John Crispin ba4a7fca7b update profiles
SVN-Revision: 31061
2012-03-25 08:50:27 +00:00
John Crispin 0f6a9d5c7c bump kernel to 3.2.12
SVN-Revision: 31060
2012-03-25 08:50:09 +00:00
Felix Fietkau db6e326c56 targets: replace madwifi in profiles with ath5k, madwifi is unmaintained
SVN-Revision: 31015
2012-03-19 09:58:13 +00:00
Jonas Gorski fab5be9b4f lantiq: load dwc_otg early
Needed for using external rootfs on usb sticks.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 30940
2012-03-14 10:59:52 +00:00
John Crispin e5798d7c9b fixes etop locking issue
SVN-Revision: 30689
2012-02-23 07:42:00 +00:00
John Crispin 1a71f07d00 generate uboot environment data in target
With this patch it is possible to generate uboot environment config file
inside lantiq target. Currently it is only supporting GIGASX76X board.

uboot environment config is used by fw_printenv fw_setenv tools.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 30537
2012-02-14 19:07:11 +00:00
John Crispin 7416a5f0aa fix compile error in previous commit
SVN-Revision: 30534
2012-02-14 19:07:05 +00:00
John Crispin cd1a204365 Support booting the Speedport W502V using BRN-BOOT.
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.

This patch add two firmware utilities, mkbrncmdline and mkbrnboot.

mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.

mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1.

The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage

The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.

A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 30532
2012-02-14 17:48:04 +00:00
John Crispin 0b07769898 fixes irq locking in ethernet driver
SVN-Revision: 30522
2012-02-14 15:05:58 +00:00
John Crispin 55bf39e98c fixes gpio_export patch
SVN-Revision: 30521
2012-02-14 15:05:57 +00:00
John Crispin 976d3eb854 add annex selection support to ltq_dsl package
SVN-Revision: 30518
2012-02-14 15:05:49 +00:00
Jonas Gorski 1015fab0d7 kernel: update linux 3.1 to 3.1.10
SVN-Revision: 29966
2012-01-31 09:43:57 +00:00
John Crispin 49eb3fd845 gigaset 76x
* fixes leds
* adds all leds found on the sx763 board
* removes board_config from flash layout because wireless data is stored in kernel (ath5k)
* fix button handling

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 29763
2012-01-17 12:10:35 +00:00
Jonas Gorski c560444a58 kernel: update linux 3.1 to 3.1.9
SVN-Revision: 29726
2012-01-13 14:38:28 +00:00
Jonas Gorski e33bb9ec66 linux: update 3.1 to 3.1.4
SVN-Revision: 29470
2011-12-06 19:50:30 +00:00
John Crispin bf7316424c lantiq: bump to 3.1.3
SVN-Revision: 29348
2011-11-28 10:22:58 +00:00
John Crispin 9389593db9 lantiq: drop 009-MIPS-make-oprofile-use-cp0_perfcount_irq-if-it-is-se.patch
This patch is/was a duplicate of generic/patches-3.1/307-mips_oprofile_fix.patch

SVN-Revision: 29294
2011-11-23 12:22:15 +00:00
John Crispin 4982ca983c lantiq: * fixes ath5k eeprom handling * fixes sx76x * adds sx76x to userland api * minor style cleanups
Signed-of-by: Andrej Vlašić <andrej.vlasic0@gmail.com>

SVN-Revision: 29292
2011-11-22 18:50:51 +00:00
John Crispin bbe96f13a6 lantiq: add runtime generation of /etc/config/network
SVN-Revision: 29161
2011-11-15 18:21:00 +00:00
John Crispin 79a4642b40 lantiq: fix falcon build breakage
dev-wifi-rt2x00 fails to build on falcon due to missing pci

SVN-Revision: 29129
2011-11-14 18:55:58 +00:00
Jonas Gorski d8acb75009 linux: update 3.1 to 3.1.1
SVN-Revision: 29007
2011-11-13 10:48:05 +00:00
John Crispin a8797d0de6 lantiq: add uci-defaults code for handling leds
SVN-Revision: 29004
2011-11-12 23:40:21 +00:00
John Crispin 832e02cd77 lantiq: add /lib/lantiq.sh and make hotplug handlers use it
SVN-Revision: 29003
2011-11-12 23:40:16 +00:00
John Crispin 5dcbbf0160 lantiq: rename leds
SVN-Revision: 29002
2011-11-12 23:40:12 +00:00
John Crispin d84b7596d9 lantiq: split compat headers out of bsp header patch
SVN-Revision: 29001
2011-11-12 23:40:07 +00:00
John Crispin 2cff80f015 lantiq: adds hotplug handler for loading rt2x00 firmware
SVN-Revision: 29000
2011-11-12 23:40:01 +00:00
John Crispin 3660c51c40 lantiq: adds hotplug handler for handling buttons and makes w303v work with it
SVN-Revision: 28999
2011-11-12 23:39:56 +00:00
John Crispin 4248705108 lantiq: cleanup default package selection
SVN-Revision: 28998
2011-11-12 23:39:51 +00:00
John Crispin eb20ab87e6 lantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how to use it
SVN-Revision: 28994
2011-11-12 18:41:15 +00:00
John Crispin fda4ee22a0 lantiq: improve falcon package selection
SVN-Revision: 28962
2011-11-11 21:59:11 +00:00
John Crispin e1dc73be90 lantiq: fix breakage introduced in 3.1 bump
SVN-Revision: 28961
2011-11-11 21:59:01 +00:00
John Crispin 95d36d3efe lantiq: remove obseleted folder. we use 3.1 now
SVN-Revision: 28728
2011-11-03 16:33:27 +00:00
John Crispin ea36ad76bc lantiq: bump to 3.1
SVN-Revision: 28721
2011-11-03 15:15:52 +00:00
John Crispin 0a866293bd * update patches to 3.0
* add basic vr9 support
* backport 3.1 fixes
* backport 3.2 queue (falcon)

SVN-Revision: 28405
2011-10-10 15:13:46 +00:00
John Crispin aecc73de77 The enable function was using the global timeout variable for local operations. This resulted in the value of the global variable being corrupted, thus breaking the code.
SVN-Revision: 28310
2011-09-26 10:35:51 +00:00
John Crispin 1ef8066bff * remove obseleted m25p80 patch
SVN-Revision: 28309
2011-09-26 09:36:02 +00:00
John Crispin cf59e7255d * rebase 3.0 patches * fold some fixes into existing patches
SVN-Revision: 28308
2011-09-26 09:35:02 +00:00
Hauke Mehrtens 09b1073f9b kernel: update kernel to version 2.6.39.4
SVN-Revision: 28022
2011-08-16 22:04:10 +00:00
John Crispin 8acc276692 sync default kernel config for lantiq danube/ar9
SVN-Revision: 27697
2011-07-19 18:08:09 +00:00
John Crispin 500d7d4bc8 fix etehrnet when using EPHY on lantiq ASE
SVN-Revision: 27696
2011-07-19 18:06:52 +00:00
John Crispin 78a9b1a2ad fixes pci on lantiq AR9 SoC
SVN-Revision: 27695
2011-07-19 18:06:42 +00:00
John Crispin 3833b7be24 add support for more lantiq AR9 boards
SVN-Revision: 27694
2011-07-19 18:06:33 +00:00
John Crispin 6b8c119b41 * fix external interrupts
SVN-Revision: 27687
2011-07-18 16:27:11 +00:00
John Crispin 5906377332 * add gigasx76x update
* rebase patches
* add arv752DPW arv7525PD
* fixes gpio_keys

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 27665
2011-07-17 19:27:44 +00:00
John Crispin 7f548d379f fix generation of falcon images for profiles
SVN-Revision: 27550
2011-07-07 20:20:51 +00:00
John Crispin d7732885ed adds 2 ASC related patches to lantiq
Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>

SVN-Revision: 27549
2011-07-07 20:20:46 +00:00
John Crispin b75a8fb532 fix up falcon kernel config
SVN-Revision: 27542
2011-07-07 18:20:56 +00:00
John Crispin 036df9f088 fix i2c-falcon kmod package selection
SVN-Revision: 27541
2011-07-07 18:20:51 +00:00
John Crispin a463daa818 replace all references to xway with danube
SVN-Revision: 27538
2011-07-07 18:20:37 +00:00
John Crispin dc2af33083 fix lantiq image makefile to represent new split between ar9 and danube
SVN-Revision: 27537
2011-07-07 18:20:31 +00:00
John Crispin 3c1079a7a7 add ar9 specific profile
SVN-Revision: 27536
2011-07-07 18:20:27 +00:00
John Crispin 09d547eae4 rename xway profile to danube and remove ar9 specifics
SVN-Revision: 27535
2011-07-07 18:20:21 +00:00
John Crispin f177052c9d remove ar9 board from xway profiles
SVN-Revision: 27534
2011-07-07 18:20:16 +00:00
John Crispin dc69e5f2e3 remove CONFIG_MTD_PARTITIONS references from lantiq 3.0 patches
SVN-Revision: 27532
2011-07-07 18:20:07 +00:00
John Crispin a674aabe54 get ready for 3.0
SVN-Revision: 27496
2011-07-06 17:27:17 +00:00
John Crispin d42f0c9a1b fixes mtd maps for lantiq easy50712 and easy50601 evalkit. without this patch mini_fo/jffs caused the uboot to be overwritten on firstboot
SVN-Revision: 27489
2011-07-06 10:36:56 +00:00
John Crispin 29653782a9 set DEFAULT_SUBTARGET for lantiq/
SVN-Revision: 27445
2011-07-04 11:21:47 +00:00
John Crispin 04fefa4a28 fix broken falcon patches from last night
SVN-Revision: 27441
2011-07-04 07:50:34 +00:00
John Crispin 0a8430bfab use netif_receive_skb on lantiq
Signed-off-by: Luca Olivetti <luca@ventoso.org>

SVN-Revision: 27410
2011-07-03 17:39:05 +00:00
John Crispin 058eca0b3b automatic subtarget enumaration
SVN-Revision: 27407
2011-07-03 17:38:23 +00:00
John Crispin 43771202d3 update lantiq/falcon patches
SVN-Revision: 27406
2011-07-03 17:38:11 +00:00
John Crispin d43cbe24a5 fix description for lantiq target
SVN-Revision: 27405
2011-07-03 17:37:57 +00:00
Hauke Mehrtens c5821c1a3a kernel: update kernel to 2.6.39.2
SVN-Revision: 27298
2011-06-28 19:30:58 +00:00
John Crispin 0732b2db78 Fix for bug where the iniatialisation of the MAC data private strucure
is copied into the wrong location.

Ticket #9547

Signed-off-by: Conor O'Gorman <conor at dna.ie>

SVN-Revision: 27172
2011-06-13 22:37:23 +00:00
John Crispin fa59bb0958 * move patches around * add basic support for gigaset sx76x
SVN-Revision: 27158
2011-06-12 08:56:26 +00:00
John Crispin ed0e649a5b * fixes spi flash for ar9
* adds limited support for netgear dgn3500 (enough for others to start working with)

SVN-Revision: 27137
2011-06-08 17:57:55 +00:00
Florian Fainelli 763b58c30c update to 2.6.39.1
patch from Peter Wagner

SVN-Revision: 27104
2011-06-04 13:35:55 +00:00
Mirko Vogt ba5b3ece5d purge out CONFIG_CRYPTO* symbols out of target specific kernel configs since OpenWrt is taking care of them
SVN-Revision: 27036
2011-05-31 09:47:30 +00:00
John Crispin 6608f419d1 * backport 2.6.8 patches to .39 / .32.33
* remove lqtapi
* bump tapi/dsl to .39
* migrate to new ltq_ style api
* add amazon_se support

SVN-Revision: 27026
2011-05-29 21:19:26 +00:00
Hauke Mehrtens 50c743e79e kernel: Update to version 2.6.37.6
Thank you Peter Wagner for the patch

SVN-Revision: 26441
2011-04-03 13:59:07 +00:00
John Crispin ba4dd89063 remove unknown package names from DEFAULT:=
SVN-Revision: 26403
2011-04-02 12:56:11 +00:00
John Crispin 628a47642c * adds spi driver, thx daniel
SVN-Revision: 26355
2011-03-29 07:10:50 +00:00
John Crispin ff885fde8e * fix ARV7518PW support
SVN-Revision: 26354
2011-03-29 06:20:00 +00:00
John Crispin 08bb107823 * use netif_rx of the phydev if it is provided
SVN-Revision: 26353
2011-03-29 06:19:31 +00:00
John Crispin 5b0f2fb918 * shrink the memory window of the wdt
SVN-Revision: 26352
2011-03-29 05:18:08 +00:00
Felix Fietkau 335877a2b3 global cflags: remove -funit-at-a-time, it is ignored by recent compilers. instead add -fno-caller-saves, which improves compression ratio for generated code with no apparent negative effects on performance
SVN-Revision: 26300
2011-03-26 01:07:12 +00:00
Imre Kaloz b8430e7427 update to 2.6.32.33 and 2.6.37.4
SVN-Revision: 26226
2011-03-18 13:25:32 +00:00
John Crispin ba3251a90d * fixes arv4510 board support * fixes nor swizzle hack * fixes gpio .can_sleep * fixes compile warning inside pci driver
SVN-Revision: 26157
2011-03-14 07:33:23 +00:00
Felix Fietkau 1faf243c73 lantiq: add missing #include for the falcon i2c driver
SVN-Revision: 26152
2011-03-13 22:39:16 +00:00
Hauke Mehrtens 4226f1d373 kernel: update to kernel version 2.6.37.3
SVN-Revision: 26126
2011-03-13 17:14:08 +00:00
John Crispin c75b0ca1a8 * update kernel to .37 * add support for falcon (big thank you goes to lantiq !!)
SVN-Revision: 26021
2011-03-11 08:19:53 +00:00
Florian Fainelli 31709b2c76 update to 2.6.35.11
SVN-Revision: 25582
2011-02-19 12:44:16 +00:00
John Crispin 34e5998921 * fixes dwc_otg init when power gpio is set to -1
SVN-Revision: 25521
2011-02-13 16:01:07 +00:00
John Crispin 2268dfafd3 * adds ath5k platform support * adds several new profiles
SVN-Revision: 25367
2011-02-04 22:49:52 +00:00
John Crispin 752dcaeaf4 * fixes old ifxmips in header file * pass default ebu value to gpio driver
SVN-Revision: 25366
2011-02-04 22:48:53 +00:00
John Crispin f394bbbcaa * fix usb compile warnings * fix timer header file which broke compile of external tapi driver * rebase patch
SVN-Revision: 25344
2011-02-03 17:34:55 +00:00
John Crispin 1e89df511a * adds profiles to the kernel * fixes 2 compile errors in the usb driver * ioports were not allocated properly
SVN-Revision: 25278
2011-02-01 14:37:35 +00:00
John Crispin a15b4bf6fc * adds arv4518pw mach support * fixes arv4525pw * make sure all mach names have the same style * move code around
SVN-Revision: 25075
2011-01-23 19:16:33 +00:00
John Crispin a8819fd220 adds machtype for ARV7518PW
SVN-Revision: 25074
2011-01-23 12:51:15 +00:00
John Crispin 699f5c8729 remove deadcode from [25072]
SVN-Revision: 25073
2011-01-23 12:12:23 +00:00
John Crispin 7c9e1370e9 * fix pci support for more than 1 device * fixes ioport mappings * adds support for arcor easybox 803/arv752DWP22 * gpio direction was not set properly during a gpio_request() * usb compile warning
bugfix, cleanup,

SVN-Revision: 25072
2011-01-23 12:08:44 +00:00
John Crispin 4d465f4036 * revert [25002] * fixes EBU ack when EBU causes an irq
SVN-Revision: 25047
2011-01-19 15:56:27 +00:00
Mirko Vogt 63aeef20c0 move irq.c from patch into own file
SVN-Revision: 25002
2011-01-15 03:32:16 +00:00
John Crispin 1d6fbd2e85 * fixes duplicate registration of dwc_otg usb core
SVN-Revision: 24738
2010-12-20 17:56:09 +00:00
John Crispin 5e3e1d4a02 * make the usb gpio configurable * 105-header_xway.patch has a corrupt line count in it
SVN-Revision: 24564
2010-12-14 13:02:49 +00:00
John Crispin 9f47e80bb3 adds new lantiq kernel. once the codebase is fully tested and know to be working on all the devices previously supported by ifxmips, we will drop ifxmips support.
SVN-Revision: 24526
2010-12-12 22:57:16 +00:00