613bc3ef3f
bcm53xx: bcm_nand: fix compilation
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43584
2014-12-08 18:28:54 +00:00
aed6b26431
bcm53xx: bcm_nand: switch from cmdlinepart to ofpart
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43580
2014-12-08 17:39:07 +00:00
7a2f186d70
bcm53xx: update the NAND driver
...
This adds some updates to the NAND driver and refreshed the config.
Most of these changes are done in preparation for mainling it.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43546
2014-12-07 21:55:21 +00:00
664ae86dde
bcm53xx: update the PCIe driver
...
This adds some updates to the PCIe driver and refreshed the config.
Most of these changes are done in preparation for mainling it.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43545
2014-12-07 21:54:53 +00:00
d9bb8326fa
kernel: update bcma and ssb to wireless-testing master-2014-12-05
...
This brings ssb and bcma to wireless-testing tag master-2014-12-05
In addition it also adds the ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-
axi-in-DTS-f.patch which adds the irq number in a way it is done in the
mainline kernel.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43544
2014-12-07 21:53:20 +00:00
563f963b1b
kernel: refresh patches for kernel 3.18
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43536
2014-12-07 16:12:44 +00:00
dc6171c734
bcm53xx: 3.18: add early support for Buffalo WZR-900DHP
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43534
2014-12-07 11:02:52 +00:00
a20fa1cb48
bcm53xx: add early support for Buffalo WZR-900DHP
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43533
2014-12-07 10:55:44 +00:00
9bec9b86af
bcm53xx: backport BCM5301X patches from arm-soc.git next/dt
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43530
2014-12-05 16:46:55 +00:00
d1e0e39993
bcm53xx: squeeze (rename) BCM5301X patches
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43529
2014-12-05 16:15:16 +00:00
8ea3c20b23
bcm53xx: rename patches that were not upstreamed to 3xx
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43528
2014-12-05 16:13:27 +00:00
8033ccc975
kernel: update bcma up to 2014-10-27
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43527
2014-12-05 16:11:03 +00:00
a69ebe234d
kernel: update kernel 3.18 to rc4
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43229
2014-11-10 22:51:30 +00:00
93b3924128
kernel: backport bcm47xxpart changes queued for 3.19
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43223
2014-11-08 21:41:21 +00:00
adbb5ad195
bcm53xx: bcma: get IRQs also from device tree
...
Add patches for getting the IRQ number for a device of the bcma bus
that were send for upstream inclusion.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43148
2014-11-01 15:57:30 +00:00
6e6dffbe81
bcm53xx: set customized AUXCTL
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43146
2014-11-01 13:58:18 +00:00
5e13e40591
bcm53xx: activate early printk
...
This makes it possible to activate early printk.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43145
2014-11-01 13:57:50 +00:00
8e20cceeae
bcm53xx: refresh patches
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43144
2014-11-01 13:55:02 +00:00
f12c4b0815
bcm53xx: remove support for fpu
...
This SoC does not have a vfpv3 FPU.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43098
2014-10-27 23:04:07 +00:00
7fc9bb1aca
bcm53xx: initial support for kernel 3.18
...
This adds initial support for kernel 3.18.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43097
2014-10-27 23:02:08 +00:00
c288d2d6d9
kernel: makefiles: make use of new var KERNEL_PATCHVER
...
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 43047
2014-10-24 19:34:02 +00:00
c14e0807bd
bcm53xx: backport forgotten spi-nor change
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43031
2014-10-22 14:34:43 +00:00
2466b04a5a
bcm53xx: backport spi-nor patches from 3.18-rc1
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43030
2014-10-22 14:16:18 +00:00
bf0342f0ef
bcm53xx: add support for Asus RT-N18U LEDs & buttons
...
Got GPIOs from #18152 thanks to Grrruk
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43010
2014-10-21 14:37:44 +00:00
4669d08e83
bcm53xx: switch RT-N18U firmware to the UBI
...
According to the ticket #18152 it also uses NAND with 0x20000 erase size
and 0x800 page size.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43008
2014-10-20 22:09:40 +00:00
4fce5d1951
bcm53xx: image: switch Netgear and Buffalo devices to UBI
...
We still don't have a smart sysupgrade method, but at least we can use
UBI which provides some protection for rootfs (SquashFS).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42941
2014-10-16 21:33:34 +00:00
150c200e91
bcm53xx: hack UBI to erase all dirty blocks left by CFE
...
UBI requires PEBs to be formatted (with a valid UBI header) or empty
(0xFF), however CFE doesn't clear blocks after flashing the image. To
workaround this problem, teach UBI to recognize EOF mark in a similar
way JFFS2 handles that in OpenWrt.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42940
2014-10-16 20:52:22 +00:00
1ffe299eab
bcm53xx: enable UBI and UBIFS
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42939
2014-10-16 20:50:36 +00:00
aa5b5153f9
bcm53xx: image: build UBI partition image
...
This could be used on NAND devices once we get UBI working.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42938
2014-10-16 20:48:56 +00:00
241c098fa1
bcm53xx: image: specify flash type for all devices
...
This will allow us to add proper support for NAND one day.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42937
2014-10-16 20:44:44 +00:00
579b0d9c5b
bcm53xx: add support for Buffalo WZR-600DHP2
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42925
2014-10-15 07:14:13 +00:00
96a33c0dd7
bcm53xx: fix Asus RT-N18U support
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42924
2014-10-15 07:12:46 +00:00
5a03d0c931
bcm53xx: fix hangs in PCIe2 host driver
...
Accessing CFG regs with no card present results in SoC hang.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42895
2014-10-14 08:06:15 +00:00
540a6a45e4
bcm53xx: add temp bcma workaround that allows debugging
...
This way we will get logs if case of hang/crash in bcma or related code.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42894
2014-10-14 05:31:54 +00:00
78be7225c3
bcm53xx: prepare to support Asus RT-N18U
...
DT file doesn't include any GPIOs yet, but let's add it as we got some
interest in this device on IRC.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42864
2014-10-09 16:36:51 +00:00
9473673ae3
bcm53xx: add support for Buffalo WZR-1750DHP
...
Let's generate a simple TRX file as we can't get encrypted one.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42863
2014-10-09 16:36:05 +00:00
2818493e82
bcm53xx: add Netgear R6300 V2 LEDs and buttons
...
Thanks tusc (our forum user) for checking GPIOs.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42827
2014-10-06 21:33:17 +00:00
f35da063bc
targets: remove useless quotes around KERNELNAME
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42780
2014-10-05 20:17:19 +00:00
7436b17075
bcm53xx: build R6250 firmware with "Other Regions" region
...
This prevents vendor firmware from warning about incompatible region.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42754
2014-10-03 10:40:12 +00:00
66922082ed
bcm53xx: early support for Netgear R6300 V2
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42743
2014-10-02 19:30:08 +00:00
28301ea0b1
bcm53xx: early buttons support (without interrupts)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42718
2014-10-02 12:05:58 +00:00
bd12c49473
bcm53xx: backport bcma RFC patch that fixes LEDs
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42717
2014-10-02 10:42:30 +00:00
01ab343779
bcm53xx: support devices with more (13+) partitions
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42716
2014-10-02 09:51:54 +00:00
bbae0f7df0
bcm53xx: select LEDs support by default
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42715
2014-10-02 05:54:18 +00:00
1421516e65
bcm53xx: add BCM5301X patches sent upstream (bus and R6250 LEDs)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42711
2014-10-01 13:38:50 +00:00
59b965194d
kernel: update bcma to the tag master-2014-09-30 (wireless-next)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42710
2014-10-01 13:37:36 +00:00
26e85084b5
bcm53xx: rename BCM5301X DTS patch to match upstream order
...
SVN-Revision: 42708
2014-10-01 07:59:03 +00:00
a6616a6e48
bcm53xx: activate some workarounds for errors in the Cortex-A9
...
BCM4708 uses a Cortex-A9 rev r3p0 and a L2C-310 rev r3p2.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 42690
2014-09-28 18:03:33 +00:00
8e525a43b4
kernel: update bcma to the tag master-2014-09-26 (wireless-next)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42672
2014-09-27 07:49:48 +00:00
747fd7871c
bcm53xx: add a patch that fixes booting problems
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42659
2014-09-24 21:08:17 +00:00
Rafał Miłecki
Hauke Mehrtens
Felix Fietkau