openwrt

Commit Graph

Author	SHA1	Message	Date
Kevin Darbyshire-Bryant	bca01fddb3	ramips: remove erroneous "wdt rst" DTS entries Remove reference to pinmux group "wdt rst" on EW1200, ZBT-WG2626 and ZBT-WG3526 devices. "wdt rst" is a pinmux function and not a pinmux group. Fixes the following error message during boot: rt2880-pinmux pinctrl: invalid group "wdt rst" for function "gpio" Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>	2017-10-25 18:48:51 +02:00
L. D. Pinney	70b192f573	ramips: update device tree source files Use the GPIO dt-bindings macros and add compatible strings in the ramips device tree source files. Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>	2017-08-03 19:37:40 +02:00
L. D. Pinney	45dbd65850	ramips: mt7621: add compatible strings Add compatible strings to all mt7621 based device tree source files to fix formal issues. Signed-off-by: L. D. Pinney <ldpinney@gmail.com>	2017-07-29 09:24:32 +02:00
Francois Goudal	9b35815f0f	ramips: add support for Afoundry EW-1200 This device features both a 2.4 and 5Ghz radio, and supports 802.11a/b/g/n/ac modes. It has 5 Gb-Ethernet ports and a USB 3.0 host port. It is powered by the Mediatek MT7621 SoC, and the MT7602E and MT7612E wifi chipsets, together with 128MB of RAM and 16 MB of SPI Flash. The stock firmware is in fact based on some openwrt barrier breaker, with a mediatek SDK kernel, and an afoundry custom made web interface (not LuCI based). Firmware update page on the stock web interface can not accept sysupgrade images, it bricks the device. At this point, the only working solution I found was to connect to the serial console port (available on J4 header) and to use opkg to install dropbear. Then scp the sysupgrade file in the device's /tmp and run sysupgrade from console without preserving configuration files. Signed-off-by: Francois Goudal <francois@goudal.net>	2017-03-01 22:29:50 +01:00

4 Commits (16f2befc3cae3b541682644f53f5a81b2aaa9150)