d833ca527d
ar71xx: restore rb4xx kernel partition size to the original value
...
The new lzma compressed elf kernel image fits into
that, even on devices with large page NAND chips.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34274
2012-11-20 12:17:45 +00:00
33a99ce46b
ar71xx: install lzma compressed elf kernel image from wget2nand
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34273
2012-11-20 12:17:44 +00:00
68b5aa2fdf
ar71xx/image: provide lzma compressed elf kernel image
...
This will be used on the RB4xx/RB7xx/RB2011 boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34272
2012-11-20 12:17:43 +00:00
97867f8717
ar71xx/image: relink loader.elf image to LOADADDR
...
This allows to load the resulting image directly
from RouterBOOT.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34271
2012-11-20 12:17:41 +00:00
dd092fd10c
ramips: set clk_is_20mhz for rt2x00 on RT3352/RT5350
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34270
2012-11-20 07:19:10 +00:00
6c1fbb2d5c
mac80211/rt2x00: add rf_vals for Rt3352 with Xtal=20MHz
...
[juhosg: move ramips specific stuff into a followup patch]
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34269
2012-11-20 07:19:09 +00:00
8e4cefc7f8
refresh all kernel configurations
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34267
2012-11-20 07:19:06 +00:00
8dc72c5c4d
Revert "target specific patches have nothing to do in generic.."
...
This reverts commit r34230, as it is causing build failures:
make[3] -C package/mtd compile
imagetag.c:35:32: fatal error: linux/bcm963xx_tag.h: No such file or directory
compilation terminated.
make[4]: *** [imagetag.o] Error 1
Any patches modifying exported kernel headers need to reside in generic
as toolchain/kernel-headers only applies generic patches.
SVN-Revision: 34255
2012-11-19 12:38:26 +00:00
4c043300fc
fix 820-usb_add_usb_find_device_by_name.patch
...
SVN-Revision: 34254
2012-11-19 10:56:09 +00:00
4fa5781a95
kernel: refresh patches
...
SVN-Revision: 34253
2012-11-18 21:40:30 +00:00
86cc79ac98
brcm47xx: add support for kernel 3.6
...
This is based on the patch by Peter Wagner.
SVN-Revision: 34252
2012-11-18 21:27:00 +00:00
db763080f4
kernel: add missing generic config options for 3.6+
...
SVN-Revision: 34250
2012-11-18 20:54:53 +00:00
c159c7a462
kernel: add CONFIG_XZ_DEC=y to generic
...
CONFIG_SQUASHFS_XZ selects CONFIG_XZ_DEC so this could also be moved.
SVN-Revision: 34249
2012-11-18 20:48:53 +00:00
d577d69838
ar71xx: use custom LZMA dictionary size for WNDR3700 images
...
Based on a patch by Hannu Nyman.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34248
2012-11-18 20:25:13 +00:00
935ca3f3eb
add 3.7-rc6 support (patch 820 still has to be fixed)
...
SVN-Revision: 34247
2012-11-18 18:52:38 +00:00
863657d040
generic: ar8216: add MIB counter support for the AR8216 switch as well
...
Thanks to Jonas Gorski for the reference URL.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34245
2012-11-18 16:21:00 +00:00
98f30aac8e
generic: ar8216: rename AR8216_*_STATS_* defines
...
The names are misleading, those are only valid from
AR8236. The AR8216 chip uses different offsets.
Thanks to Jonas Gorski for the report.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34244
2012-11-18 16:20:56 +00:00
9abd8cd004
generic ar8216: allow to read/reset MIB counters via swconfig
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34243
2012-11-18 12:26:35 +00:00
4b17323b51
generic: ar8216: use dynamically allocated private data in ar8216_probe
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34242
2012-11-18 12:26:34 +00:00
169e596268
ar71xx: add user-space support for the RB435G board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34240
2012-11-18 10:18:02 +00:00
d44d954dec
ar71xx: add kernel support for the RB435G board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34239
2012-11-18 10:18:01 +00:00
d62bddc620
ar71xx: update PCI IRQ map for RB4xx devices
...
Should fix #12269 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34238
2012-11-18 09:51:04 +00:00
31881357af
ar71xx: create profile and build image for the OpenMesh MR600 board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34237
2012-11-18 09:32:41 +00:00
9da2c85b67
ar71xx: enable sysupgrade for the OpenMesh MR600
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34235
2012-11-18 09:32:39 +00:00
6380301d01
ar71xx: rename om2p.sh upgrade script to openmesh.sh
...
It will be used on other boards as well.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34234
2012-11-18 09:32:37 +00:00
d325e622d2
scripts/om-fwupgradecfg-gen.sh: add support for the MR600
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34233
2012-11-18 09:32:36 +00:00
c3174179b7
ar71xx: add user-space support for the OpenMesh MR600 board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34232
2012-11-18 09:32:35 +00:00
8d4857d677
ar71xx: add kernel support for the OpenMesh MR600 board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34231
2012-11-18 09:32:33 +00:00
b220071cd2
target specific patches have nothing to do in generic..
...
SVN-Revision: 34230
2012-11-18 09:22:38 +00:00
c90128ce31
generic: remove temporary config file introduced in r34227
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34229
2012-11-18 08:51:56 +00:00
ff1e854511
kernel: update linux 3.6 to 3.6.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34227
2012-11-18 08:41:31 +00:00
a4c205011b
move patches to patches-2.6.36
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34220
2012-11-16 16:32:55 +00:00
974b9f5c9a
remove broken flag
...
The SPARC qemu target works like a charm with the following qemu command-line:
qemu-system-sparc64 -M sun4u -L /home/florian/dev/qemu/pc-bios -kernel build_dir/linux-sparc/linux-3.6.6/vmlinux -nographic
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34219
2012-11-16 16:32:52 +00:00
5261a171e9
update to kernel 3.6.6
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34218
2012-11-16 16:32:49 +00:00
7e199fcc06
add missing framebuffer config symbol
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34217
2012-11-16 16:32:45 +00:00
b7f2f14801
advertise jffs2, squashfs and ext4 features
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34216
2012-11-16 16:32:42 +00:00
c6d9304d17
resync kernel configuration with 3.6 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34215
2012-11-16 16:32:39 +00:00
dd70319e6d
build root filesystems and install them in $(BIN_DIR)
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34214
2012-11-16 16:32:36 +00:00
8ad0b56ba5
do not build crashlog on sparc too
...
This is crashing the kernel in crashlog_init_fs(), until fixed, disable it
for SPARC too.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34213
2012-11-16 16:32:33 +00:00
19811eddb4
switch to kernel 3.6.6
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34212
2012-11-16 16:32:29 +00:00
f98ac68e0e
add support for 3.6 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34211
2012-11-16 16:32:26 +00:00
c555479127
move acx-mac80211 to the ar7 generic target
...
None of the AC49x boards that we support actually have Wi-Fi.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34208
2012-11-16 13:00:55 +00:00
b763d47bfe
3.6: add some framebuffer related config symbols
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34207
2012-11-16 13:00:51 +00:00
bc73cf5345
push atm, br2684ctl and kmod-pppoa down the DSL Profile
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34206
2012-11-16 13:00:48 +00:00
485f9573f8
brcm47xx: revert r33935: check for .ELF header in partition parser
...
For sysupgrade the generic image should be used and the special image for the wgt634u is just needed for initial flashing over CFE.
russell reported that with this patch sysupgrdae did not worked for him any more and he could not reproduce the error described in #11420 .
With the patch the linux partition also contained the loader which is in the first 128KB.
SVN-Revision: 34201
2012-11-15 16:39:45 +00:00
7da001d068
scripts: rename om2p-fwupgradecfg-gen.sh to more generic om-fwupgradecfg-gen.sh
...
It will be used for non OM2P boards as well.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34200
2012-11-14 14:18:33 +00:00
ee94ed4597
ar71xx: add profile and build image for the Ubiquiti UniFi AP-Outdoor board
...
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34198
2012-11-13 20:57:19 +00:00
9c5c079329
ar71xx: add user-space support for the Ubiquiti UniFi AP-Outdoor board
...
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34197
2012-11-13 20:57:18 +00:00
75c1d3ccc2
ar71xx: add support for the Ubiquiti UniFi AP-Outdoor device
...
[juhosg:
- rename and refresh 660-MIPS-ath79-ubnt-xm-add-unifi-outdoor patches
- wrap long lines in mach-ubnt-xm
- remove default network config, set it from uci-defaults/network
instead
- remove user-space, and image generation stuff]
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34196
2012-11-13 20:57:17 +00:00
7ab0e1566f
ar71xx: add profiles and build images for old PowerCloud System devices
...
[juhosg:
- use 'PowerCloud Systems' instead of 'PCS' in the profiles
- sort SingleProfile instances in image/Makefile]
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34195
2012-11-13 20:57:15 +00:00
f6c3a8ddd6
generic: refresh 3.6 patches
...
SVN-Revision: 34194
2012-11-13 20:57:13 +00:00
e7f77f2742
fix badly named patch file
...
SVN-Revision: 34193
2012-11-13 17:39:44 +00:00
857456aef8
switch to kernel 3.6.6
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34192
2012-11-13 17:20:19 +00:00
390b8eb864
fix CBUS UART registration
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34191
2012-11-13 17:20:14 +00:00
62c8ff19ad
ar71xx: add profile and build image for the TL-WA7510N board
...
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34190
2012-11-13 14:48:03 +00:00
165b7d2173
ar71xx: user space support for the TL-WA7510N
...
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34188
2012-11-13 14:48:01 +00:00
91bab828aa
ar71xx: add support for TP-Link TL-WA7510N
...
It is mostly the same as TL-WA901N. WLAN and LAN
are working. LAN LED is working. WLAN signal
strength LEDs are not working yet.
http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n
[juhosg:
- cleanup commit message
- move non kernel related stuff into separate changes
- rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch
- merge WA7510N support into the mach-tl-wa901nd.c file
- add 3.6 support]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34187
2012-11-13 14:48:00 +00:00
ce9d4fadfa
ar71xx: refresh patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34186
2012-11-13 14:47:58 +00:00
3b419e506c
fixes ar9 / dgn3500 support
...
SVN-Revision: 34180
2012-11-13 08:54:14 +00:00
dd8c625424
previous commit pushed 1 file too many ;)
...
SVN-Revision: 34179
2012-11-12 21:36:23 +00:00
ced0cf3a94
move ethernet hw init to init/uninit functions
...
This should fix the stalled irq problem seen by several people.
This is not the real fix, but rather moves the bug to the un/init patch of the driver.
The real bug still needs to be fixed, but this workaround should be suffcient to make
the ethernet stable.
SVN-Revision: 34177
2012-11-12 21:35:01 +00:00
31541f81c3
brcm47xx: remove double definition of kmod-tg3 added in r34150
...
SVN-Revision: 34176
2012-11-12 21:34:00 +00:00
bac93bdd8e
brcm47xx: fix cfe config detection on WGT634U broken in r33920
...
Thanks Russell Senior for reporting this.
SVN-Revision: 34175
2012-11-12 21:32:33 +00:00
00243027dd
cns3xxx: merge gpio patches
...
SVN-Revision: 34174
2012-11-12 19:27:30 +00:00
fb9b572f0a
cns3xxx: fix build failure after r34168
...
SVN-Revision: 34173
2012-11-12 19:27:29 +00:00
a8c492dbb3
MIPS: add a build fix for arch/mips/boot/compressed/decompress.c
...
And get rid of the AR7 patch because at least the Alchemy SoC also needs it
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34170
2012-11-12 12:49:47 +00:00
5cddb170cd
reorder, rename and refresh patches
...
SVN-Revision: 34169
2012-11-12 09:18:00 +00:00
77504ac06f
split spi patch, follow mainline file naming
...
SVN-Revision: 34168
2012-11-12 08:22:14 +00:00
9a780e0328
split the i2c patch, merge the retry fixup
...
SVN-Revision: 34167
2012-11-12 08:21:38 +00:00
5f30fe31b6
move redboot boardconfig patch into target folder
...
SVN-Revision: 34166
2012-11-12 07:56:37 +00:00
527c473674
add support for the Tonze AP-422/425
...
SVN-Revision: 34165
2012-11-11 21:04:30 +00:00
ee9e3bf82e
refresh patch
...
SVN-Revision: 34164
2012-11-11 21:03:52 +00:00
dcfd6cd5a4
generate single images for tftp flashing as well as sysupgrade images for boards with old u-boot
...
SVN-Revision: 34163
2012-11-11 20:57:04 +00:00
16275bdd15
cns3xxx: convert dwc_otg patches to files
...
SVN-Revision: 34162
2012-11-11 20:03:58 +00:00
e38adfc912
cns3xxx: convert ethernet patches to files
...
SVN-Revision: 34161
2012-11-11 20:03:56 +00:00
306894b88f
bcm63xx: switch to 3.6.6
...
SVN-Revision: 34160
2012-11-11 19:57:17 +00:00
4658e463d9
move fixed mapping of internal devices into vmalloc region
...
SVN-Revision: 34158
2012-11-11 19:29:27 +00:00
9760644af4
advertise squashfs feature
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34157
2012-11-11 19:26:54 +00:00
dd541cbefa
add support for Linux 3.6
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34156
2012-11-11 19:26:50 +00:00
f7fcb3c845
split kernel config between generic, au1500 and au1550
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34155
2012-11-11 19:26:44 +00:00
b363a7e491
add support for Linux 3.6
...
SVN-Revision: 34154
2012-11-11 18:41:09 +00:00
854c504781
move files directory to files-3.3
...
SVN-Revision: 34153
2012-11-11 18:40:48 +00:00
cadd36a303
brcm47xx: remove ssb-gige package
...
CONFIG_SSB_DRIVER_GIGE is set in the target config of the brcm47xx target, so it will always be activated and the kmod-ssb-gige is not needed any more.
The kmod-ssb-gige package is not generated in an build as it does not contain any files and the makes the image builder fail when generating a image integrating this package.
SVN-Revision: 34150
2012-11-11 17:30:33 +00:00
62c9156af6
generate image for AC49x
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34149
2012-11-11 16:11:39 +00:00
9c7d221d47
create AC49x subtarget
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34148
2012-11-11 16:11:34 +00:00
668234c109
create generic subtarget
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34147
2012-11-11 16:11:29 +00:00
4891549bcd
detect AC49x flash partitions
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34146
2012-11-11 16:11:22 +00:00
feb968d964
support AC49x bootloader environment
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34145
2012-11-11 16:11:14 +00:00
7d09c61d65
add AudioCodes AC49x platform support to kernel
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34144
2012-11-11 16:11:09 +00:00
d9b89db380
free memory below kernel offset
...
Some bootloaders (e.g. PSPBoot on AC49x) have a load-offset, this frees that
memory region so it is usable for Linux.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34143
2012-11-11 16:11:00 +00:00
298a8e2300
x86/generic: don't disable usbfs ( #12452 )
...
SVN-Revision: 34139
2012-11-10 23:28:58 +00:00
c54fa281b1
bcm63xx: fix compilation with kmod-ohci enabled with 3.6
...
Fixes the following error:
drivers/usb/host/ohci-bcm63xx.c: In function 'ohci_bcm63xx_start':
drivers/usb/host/ohci-bcm63xx.c:33:3: error: implicit declaration of function 'err' [-Werror=implicit-function-declaration]
Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 34138
2012-11-10 22:10:47 +00:00
15519bec9c
bcm63xx: add two missing usb patches to 3.6
...
SVN-Revision: 34137
2012-11-10 19:59:16 +00:00
06ad6ffe16
bcm63xx: fix Ethernet DMA for 636x and 6328 for 3.6
...
SVN-Revision: 34136
2012-11-10 19:59:07 +00:00
f3f3f52259
cns3xxx: clean up pcie patches
...
Combine two pcie patches (2nd patch undid the 1st patch) together
and refresh the other affected patches
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 34132
2012-11-09 21:37:54 +00:00
71ddec8091
add more profiles
...
SVN-Revision: 34131
2012-11-09 19:26:58 +00:00
88e4d93802
a few more dts files (WIP)
...
SVN-Revision: 34130
2012-11-09 19:26:43 +00:00
a30b3066ce
add mtd split and atm patch
...
SVN-Revision: 34129
2012-11-09 19:26:30 +00:00
46288bf98e
x86: use $(strip) for the at_keyboard check
...
SVN-Revision: 34127
2012-11-09 10:53:36 +00:00
0a9e05fb0e
x86: only enable at_keyboard for the generic and kvm_guest subtargets to avoid hangs on alix2 and others (thx, russell)
...
SVN-Revision: 34126
2012-11-09 10:19:51 +00:00
502661f685
generic: sanitize deps_initramfs list
...
If any filename in the intramfs dependency
list contains a colon, that causes a kernel
build error like this:
/devel/openwrt/build_dir/linux-ar71xx_generic/linux-3.6.6/usr/Makefile:58: *** multiple target patterns. Stop.
make[5]: *** [usr] Error 2
Fix it by removing such filenames from the
deps_initramfs list.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34125
2012-11-09 09:07:29 +00:00
965c190444
cns3xxx: exit from laguna late_initcall if not running on laguna board
...
SVN-Revision: 34120
2012-11-08 11:31:56 +00:00
0da0dc0f2b
cns3xxx: add PPS support for laguna
...
Many Laguna products have on-board GPS with Pulse-per-second (PPS)
support. This patch adds kernel support (statically) and adds
the platform data in laguna board support.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 34115
2012-11-08 05:42:31 +00:00
efcdc21824
fixup symbol selection
...
SMP already selects HAVE_ARM_TWD and HAVE_ARM_SCU,
ARCH_CNS3XXX already selects MIGHT_HAVE_PCI
SVN-Revision: 34114
2012-11-08 05:40:34 +00:00
4d66b749de
cns3xxx: fix coding style in board script
...
SVN-Revision: 34113
2012-11-07 23:12:06 +00:00
6090ddc896
adds fon20n profile
...
SVN-Revision: 34112
2012-11-07 20:26:31 +00:00
3991526989
ramips: use kernel 3.6.6
...
## Booting image at 80800000 ...
Image Name: MIPS OpenWrt Linux-3.6.6
Created: 2012-11-06 14:19:54 UTC
System Control Status = 0x20440000
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 3560768 Bytes = 3.4 MB
Load Address: 80000000
Entry Point: 80000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 32
Starting kernel ...
[ 0.000000] Linux version 3.6.6 (daniel@localhost.localdomain ) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0001964c (MIPS 24KEc)
[ 0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Writing ErrCtl register=0000c388
[ 0.000000] Readback ErrCtl register=0000c388
[ 0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem)
[ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:48
[ 0.000000] console [ttyS1] enabled, bootconsole disabled
[ 0.000000] console [ttyS1] enabled, bootconsole disabled
[ 0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)
[ 0.090000] pid_max: default: 32768 minimum: 301
[ 0.100000] Mount-cache hash table entries: 512
[ 0.110000] NET: Registered protocol family 16
[ 0.120000] MIPS: machine is Allnet ALL0239-3G
[ 0.140000] bio: create slab <bio-0> at 0
[ 0.150000] Switching to clocksource MIPS
[ 0.160000] NET: Registered protocol family 2
[ 0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.200000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.210000] TCP: reno registered
[ 0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.240000] NET: Registered protocol family 1
[ 5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 5.490000] msgmni has been set to 52
[ 5.500000] io scheduler noop registered
[ 5.510000] io scheduler deadline registered (default)
[ 5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
[ 5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
[ 5.560000] physmap platform flash device: 00800000 at bf000000
[ 5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
[ 5.600000] Amd/Fujitsu Extended Query Table at 0x0040
[ 5.610000] Amd/Fujitsu Extended Query version 1.3.
[ 5.620000] number of CFI chips: 1
[ 5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0
[ 5.640000] Creating 6 MTD partitions on "physmap-flash.0":
[ 5.650000] 0x000000000000-0x000000030000 : "u-boot"
[ 5.660000] 0x000000030000-0x000000040000 : "u-boot-env"
[ 5.680000] 0x000000040000-0x000000050000 : "factory"
[ 5.690000] 0x000000050000-0x000000130000 : "kernel"
[ 5.700000] 0x000000130000-0x000000800000 : "rootfs"
[ 5.710000] mtd: partition "rootfs" set to be root filesystem
[ 5.730000] split_squashfs: error occured while reading from "physmap-flash.0"
[ 5.740000] 0x000000050000-0x000000800000 : "firmware"
[ 5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33
[ 5.780000] TCP: cubic registered
[ 5.780000] NET: Registered protocol family 17
[ 5.790000] 8021q: 802.1Q VLAN Support v1.8
[ 5.820000] Freeing unused kernel memory: 2676k freed
[ 6.490000] Button Hotplug driver version 0.4.1
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
- init -
Please press Enter to activate this console. [ 10.150000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[ 10.170000] Backport based on wireless-testing.git master-2012-09-07
[ 10.180000] compat.git: wireless-testing.git
[ 10.210000] cfg80211: Calling CRDA to update world regulatory domain
[ 10.230000] cfg80211: World regulatory domain updated:
[ 10.240000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.250000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.270000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.280000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.300000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.310000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.430000] NET: Registered protocol family 10
[ 10.760000] PPP generic driver version 2.4.2
[ 10.820000] l2tp_core: L2TP core driver, V2.0
[ 10.840000] l2tp_netlink: L2TP netlink interface
[ 10.870000] sit: IPv6 over IPv4 tunneling driver
[ 10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.060000] NET: Registered protocol family 24
[ 11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max)
[ 11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.510000] device eth0.1 entered promiscuous mode
[ 14.520000] device eth0 entered promiscuous mode
[ 14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 14.550000] br-lan: port 1(eth0.1) entered forwarding state
[ 14.560000] br-lan: port 1(eth0.1) entered forwarding state
[ 16.560000] br-lan: port 1(eth0.1) entered forwarding state
[ 16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33
BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Bleeding Edge, r34079)
-----------------------------------------------------
* 1/2 oz Galliano Pour all ingredients into
* 4 oz cold Coffee an irish coffee mug filled
* 1 1/2 oz Dark Rum with crushed ice. Stir.
* 2 tsp. Creme de Cacao
-----------------------------------------------------
root@OpenWrt:/#
SVN-Revision: 34111
2012-11-07 20:26:21 +00:00
480892226d
ramips: add HAVE_CLK to Kconfig on all ramips socs
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 34110
2012-11-07 20:26:04 +00:00
feb31be6af
ramips: add linux-3.6 configuration for ramips socs
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
create mode 100644 target/linux/ramips/rt288x/config-3.6
create mode 100644 target/linux/ramips/rt305x/config-3.6
create mode 100644 target/linux/ramips/rt3883/config-3.6
SVN-Revision: 34109
2012-11-07 20:25:55 +00:00
ca1fcaed5b
ramips: port patches to linux-3.6
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch
create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch
create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch
create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch
create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch
create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch
create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch
create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch
create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch
create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch
create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch
create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch
SVN-Revision: 34108
2012-11-07 20:25:34 +00:00
f2bb7754f5
bcm63xx: Enable endian check support for ath9k pci fixup.
...
Some ath9k caldatas need to be "endian checked".
This patch allows selecting wether to enable endian check or not.
Endian check is disabled by default.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 34105
2012-11-07 09:01:03 +00:00
f2b75b517b
fixup typos in the compex patch
...
SVN-Revision: 34104
2012-11-07 07:51:24 +00:00
a50d121d8e
linux: export bcm963xx_tag.h to userspace
...
Export bcm963xx_tag.h so mtd can use it without using kernel includes.
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
[jonas.gorski@gmail.com: fixup bcm63xx patches, completely remove header
from original location, refresh patches, use a more matching patch
number, port to 3.6]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
SVN-Revision: 34103
2012-11-06 15:21:46 +00:00
865933a0ec
cns3xxx: refresh kernel config file
...
SVN-Revision: 34102
2012-11-06 11:16:43 +00:00
9a5c26d4ef
cns3xxx: use files directory
...
SVN-Revision: 34101
2012-11-06 11:16:41 +00:00
7404e59bbd
add OWRTDTB marker patch
...
SVN-Revision: 34100
2012-11-06 10:39:43 +00:00
3a1851964e
add support for arv7525
...
SVN-Revision: 34097
2012-11-06 07:38:24 +00:00
e141cbb0f9
refresh patches
...
SVN-Revision: 34095
2012-11-06 05:45:12 +00:00
1a9dfd566e
add default packages
...
SVN-Revision: 34094
2012-11-06 05:39:08 +00:00
0722fd9c63
linux: generic: fix split_squashfs for 3.6
...
_read expects the retlen to be initialized to zero, which the mtd_read
helper does. So fix it by using mtd_read instead of calling _read directly.
SVN-Revision: 34093
2012-11-06 00:48:21 +00:00
5bc7d81a20
bcm63xx: fix SPW303V images
...
SPW303V also needs its CRC fixed up since increasing the image size to
4MB to prevent the dual image mode of CFE.
SVN-Revision: 34091
2012-11-05 22:50:29 +00:00
e92da5e7ae
ar71xx: nuke ath79_set_usb_power_gpio helper
...
It is no longer used.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34088
2012-11-05 13:23:28 +00:00
f2528b1792
ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34087
2012-11-05 13:23:27 +00:00
e8669729bc
kernel: update linux 3.6 to 3.6.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34086
2012-11-05 13:22:09 +00:00
d822ecfdf8
use the mainline machname for the compex boards
...
SVN-Revision: 34083
2012-11-05 11:38:23 +00:00
a0dd47bbed
ramips: enable USB power on the DIR-645
...
Closes #12422 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34082
2012-11-05 11:04:45 +00:00
5e43b934fd
linux/3.3: backport an upstream GPIO patch
...
The backported patch introduces new flags to
automatically export GPIOs when using the
convenience unctions gpio_request_one() or
gpio_request_array().
This will be used by ar71xx/ramips platforms.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34081
2012-11-05 11:04:43 +00:00
829aaedcbf
ramips: add restorefactory to default package set for ALL0239-3G and ALL0256N
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 34078
2012-11-05 06:58:53 +00:00
ed35253f4c
ar71xx: don't use the unknown LED on the ZCN-1523-5 board
...
According to #12421 , GPIO 1 controls the power
output on the unused lines of the LAN2 port.
Remove the LED definition in order to prevent
possible permanent hardware damage.
If someone needs that, the power-out feature can
be controlled via the GPIO sysfs interface.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34076
2012-11-04 22:08:54 +00:00
1b744e1ca5
ar71xx: include mtd layout in the command line for ZCN-1523H-* boards
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34074
2012-11-04 21:12:20 +00:00
b78a736dc2
ar71xx: add missing Makefile entry for the ZCN-1523H-{2,5} boards
...
Also add the missing ATH79_MACH_ZCN_1523H_5 symbol.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34072
2012-11-04 20:15:18 +00:00
6040b1d29a
linux-3.6: fix portability of some includes files in tools/ used on the host
...
SVN-Revision: 34068
2012-11-04 17:01:15 +00:00
05fbb370dc
3.6 is not the default yet
...
SVN-Revision: 34065
2012-11-03 13:29:44 +00:00
a9ad36b7f1
adds dts files and make devicetree images buildable
...
SVN-Revision: 34064
2012-11-02 20:07:47 +00:00
c8ae6dac56
update ase target for 3.6
...
SVN-Revision: 34063
2012-11-02 20:07:41 +00:00
dc8641f7fa
add subtarget, as of 3.6 we dont seperate xway SoC
...
SVN-Revision: 34062
2012-11-02 20:07:36 +00:00
dd619da4fc
adds 3.6 files, patches and config
...
SVN-Revision: 34061
2012-11-02 20:07:26 +00:00
736835343c
move files/ -> files-3.3/
...
SVN-Revision: 34060
2012-11-02 20:07:02 +00:00
fa316620a7
prepare Makefile for 3.6
...
SVN-Revision: 34059
2012-11-02 20:06:51 +00:00
0005762690
generic: make yaffs work on 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34054
2012-11-01 11:07:23 +00:00
ffcb4b0fe1
generic: rename jffs2 patches
...
Make room for the upcoming yaffs patches.
No functional changes.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34053
2012-11-01 11:07:16 +00:00
6c8c3ee77d
generic: use mtd_* helpers in the yaffs code
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34046
2012-10-31 21:17:30 +00:00
3c12bad276
move PCIe init to subsys init call
...
ARM Linux PCI/PCIe hardware intialization needs to occur before device_init
as it does not support hotplug. I have modeled the cns3xxx PCIe init after
other ARM platforms. Registering it early resolves resource issues occuring
during bus enumeration that occur when a device driver is linked static in
the kernel.
Instead of passing in a bitmask to enable the 2 available ports, link detect
is used to enable ports that have a valid link.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 34044
2012-10-31 20:16:53 +00:00
07a762c4c5
kernel: update linux 3.6 to 3.6.5
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34042
2012-10-31 20:09:39 +00:00
a4126685c6
generic: split yaffs-3.2-fix patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34041
2012-10-31 19:33:12 +00:00
4baeb543f0
generic: replace yaffs-2.6.39 patch
...
Use backported upstream patches instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34032
2012-10-31 15:12:45 +00:00
b888c2deab
generic: replace yaffs mutex_fix patch
...
Use a backported patch instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34021
2012-10-30 21:16:24 +00:00
d54782d01a
generic: replace yaffs symlink fix patch
...
Use a backported patch instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34020
2012-10-30 21:16:23 +00:00
9a8ccc1a08
generic: rename yaffs patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34019
2012-10-30 21:16:21 +00:00
e14e4306c9
set earlyprintk UART to be the default Realview UART
...
SVN-Revision: 34015
2012-10-30 16:56:10 +00:00
449f88df0f
generic: fold yaffs_git_2010_10_20 patch to generic/files
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34013
2012-10-30 14:58:17 +00:00
56190ed0fc
generic: fold yaffs_cvs_2009_04_24 patch to generic/files
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34012
2012-10-30 14:58:13 +00:00
7228a91a3b
ar71xx: fix link speed between AR7242 and AR8327 on the RB750GL/RB751G boards
...
The default pll_1000 value had to be changed
in order to make it working.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33993
2012-10-29 17:24:30 +00:00
e91dc2e5b3
target: refresh all target configs with kconfig.pl
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33987
2012-10-29 10:11:05 +00:00
c0c69c974f
add missing 3.6 symbols
...
SVN-Revision: 33986
2012-10-29 10:00:02 +00:00
8e49dfe68a
the uImage's filename will hardly change
...
SVN-Revision: 33985
2012-10-29 09:55:20 +00:00
f7b2089704
generic: add more symbols for 3.6
...
Also refresh the config file with kconfig.pl.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33984
2012-10-29 09:08:59 +00:00
e4db63fd64
ar71xx: add initial support for 3.6
...
The nand subtarget is not working yet.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33983
2012-10-28 19:52:02 +00:00
87186c5ed4
kernel: update linux 3.6 to 3.6.4
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33982
2012-10-28 18:59:39 +00:00
a6549ac1cb
ar71xx: remove NO_AUTOINCR flag from the NAND drivers
...
The flag is not present in 3.6.
Also add compatibility patches for 3.3.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33971
2012-10-28 12:21:15 +00:00
9a37cf7ec6
generic: fix crashlog patch for 3.6
...
kmsg_dump() uses an iterator to receive log buffer
content since 3.5. Change the 'crashlog_do_dump'
function in order to make it compatible with the
new version.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33970
2012-10-28 09:50:50 +00:00
e2ec99889e
ar71xx: ag71xx: fix build_skb arguments for 3.6
...
Also add a compatibility patch for 3.3
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33969
2012-10-27 17:11:06 +00:00
7640a7cc24
generic: fix tcp_window_check patch for 3.6
...
Move the new entry to the end of the tcp_sysctl_table
array to fix the following error:
[ 7.670000] sysctl table check failed: net/netfilter/nf_conntrack_tcp_max_retrans No data
[ 7.680000] Call Trace:
[ 7.680000] [<80273bc4>] dump_stack+0x8/0x34
[ 7.680000] [<80128710>] __register_sysctl_table+0x374/0x3a8
[ 7.690000] [<868d5034>] nf_conntrack_l4proto_unregister+0x158/0x1a0[nf_conntrack]
[ 7.700000] [<868d50e4>] nf_conntrack_l4proto_register+0x68/0x21c[nf_conntrack]
[ 7.710000] [<868b237c>] need_ipv4_conntrack+0x35c/0xb60[nf_conntrack_ipv4]
[ 7.710000]
[ 7.720000] nf_conntrack_l4proto_tcp4 :protocol register failed
[ 7.720000] nf_conntrack_ipv4: can't register pernet ops
[ 7.780000] nf_nat: Unknown symbol nf_nat_seq_adjust_hook (err 0)
[ 7.790000] nf_nat: Unknown symbol need_ipv4_conntrack (err 0)
[ 7.800000] iptable_nat: Unknown symbol nf_nat_packet (err 0)
[ 7.810000] iptable_nat: Unknown symbol nf_nat_setup_info (err 0)
[ 7.820000] iptable_nat: Unknown symbol nf_nat_icmp_reply_translation (err 0)
[ 7.820000] iptable_nat: Unknown symbol need_ipv4_conntrack (err 0)
[ 7.840000] ipt_MASQUERADE: Unknown symbol nf_nat_setup_info (err 0)
[ 7.860000] nf_nat_ftp: Unknown symbol nf_nat_follow_master (err 0)
[ 7.870000] nf_nat_ftp: Unknown symbol __nf_nat_mangle_tcp_packet (err 0)
[ 7.890000] nf_nat_irc: Unknown symbol nf_nat_follow_master (err 0)
[ 7.900000] nf_nat_irc: Unknown symbol __nf_nat_mangle_tcp_packet (err 0)
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33968
2012-10-27 15:42:25 +00:00
50be09e1f7
instead of updating the whole file, just add the additional boards
...
SVN-Revision: 33966
2012-10-27 13:29:36 +00:00
1a4f117398
rename erase size variables
...
SVN-Revision: 33964
2012-10-27 10:50:55 +00:00
549d5a6e34
add support for Netgear WN802T
...
SVN-Revision: 33963
2012-10-27 10:48:22 +00:00
cf7aed0a76
don't enforce rootfs location
...
SVN-Revision: 33962
2012-10-27 10:43:47 +00:00
702fd5cdb5
generate images for the D-Link DWL-3150 as well
...
SVN-Revision: 33961
2012-10-27 09:42:58 +00:00
3a86affcdd
ar71xx: enable sysupgrade for the CAP4200AG board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33960
2012-10-27 08:55:42 +00:00
e99d557c08
ar71xx: add profile and build image for the CAP4200AG
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33958
2012-10-27 08:55:40 +00:00
9287e0c863
ar71xx: add user-space part for the CAP4200AG
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33957
2012-10-27 08:55:39 +00:00
d54c9653e9
ar71xx: add support for the Senao CAP4200AG board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33956
2012-10-27 08:55:38 +00:00
3b7cb4eb4a
ar71xx: add ath79_wmac_disable_[25]ghz helpers
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33955
2012-10-27 08:55:37 +00:00
e8fc46b7c5
generic: allow to disable [25]GHz support in ath9k via platform data
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33954
2012-10-27 08:55:36 +00:00
c92998f9d9
generic: use mtd_read in myloader parser
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33952
2012-10-27 07:57:59 +00:00
269872fe1e
ar71xx: use mtd_read in wrt160nl_part
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33951
2012-10-27 07:57:58 +00:00
973eda6077
ar71xx: use mtd_read in tplinkpart
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33950
2012-10-27 07:57:57 +00:00
28f3adc2ed
ar71xx: generate 4,8,16M images for the WPE72
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33949
2012-10-27 07:57:55 +00:00
ee9376d153
generic: swconfig: use led_set_brightness in LED control code
...
The 'led_brightness_set' function has
been renamed to 'led_set_brightness'
in recent ernels. Use the new name and
add a compatibility patch for 3.3.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33946
2012-10-26 18:58:18 +00:00
1127781d40
generic: add missing symbols for 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33945
2012-10-26 18:58:15 +00:00
ff481a5518
ar71xx: reject TP-Link images containing a bootloader
...
The original TP-Link firmware images can be flashed via
the sysupgrade command, however those may contain a
bootloader. Flashing such an image via sysupgrade
bricks the board, and it can't be recovered without
a serial console.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33944
2012-10-26 18:58:13 +00:00
db5eea6acd
ramips: use correct key code for the RFKILL switch on the TEW-691GR
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33943
2012-10-26 18:53:44 +00:00
c691d165c7
add 3.6 kernel configuration
...
SVN-Revision: 33942
2012-10-26 15:24:19 +00:00
9af90aa80c
add missing 6345 clock bits patch to 3.6 patches
...
SVN-Revision: 33941
2012-10-26 15:24:14 +00:00
fad6afdf06
add some more 3.6 config symbols
...
SVN-Revision: 33940
2012-10-26 15:24:10 +00:00
8d69af7c9f
add preliminary support for 3.6 kernel
...
SVN-Revision: 33936
2012-10-25 21:16:51 +00:00
6a699a8ae8
brcm47xx: check for .ELF header in partition parser
...
The image format for the wgt634u is different from the normal format.
Without this patch the partition parser detects a 128kb bigger
partition after every update.
This closes #11420
Thank you b.sander for the patch.
SVN-Revision: 33935
2012-10-25 19:49:20 +00:00
d4ef5de604
kernel: add PCI id 14e4:4350 to ssb
...
* 14e4:4350 is found on a Broadcom BCM43222.
* remove some warnings when using a BCM43222.
SVN-Revision: 33929
2012-10-25 15:50:47 +00:00
1e2962e63c
kernel: add a few missing config symbols for x86. added to generic config because of dependencies, so that kernel_menuconfig does not remove them again
...
SVN-Revision: 33923
2012-10-25 15:11:45 +00:00
5591188ac3
kernel: refresh config files using kconfig.pl
...
SVN-Revision: 33922
2012-10-25 15:11:40 +00:00
dca633f1c8
kernel: update bcma and ssb to master-2012-10-18 from wireless-testing
...
* update the flash driver for bcm47xx to use the stubs already in bcma
* do some misc enhancements to the flash drivers for bcm47xx
SVN-Revision: 33920
2012-10-25 14:33:47 +00:00
dea2da55df
fix Ethernet DMA for 636x and 6328 after r33916
...
SVN-Revision: 33918
2012-10-25 11:54:41 +00:00
917670922b
add support for the Dynalink RTA770BW board
...
This board id is used by the Siemens Gigaset SE515 router.
SVN-Revision: 33917
2012-10-24 21:25:22 +00:00
bdfcbb8bee
make BCM6345 Ethernet DMA changes runtime checks
...
The semantics of the DMA engine are identical, we just have a couple of
special case handling.
SVN-Revision: 33916
2012-10-24 21:25:10 +00:00
df6f9072ab
ARM: fix XZ decompressor stub build failure on strstr()
...
SVN-Revision: 33915
2012-10-24 15:57:31 +00:00
b5c27880ee
fixup generic 3.6 kernel config
...
It was not meant to be committed as-is in r33911
SVN-Revision: 33914
2012-10-24 15:57:24 +00:00
a6bfca90b0
fix IFF_NO_IP_ALIGN bitmask to contain only 1 bit set
...
This issue got introduced while porting the patch over 3.6 in r33897
SVN-Revision: 33913
2012-10-24 13:23:20 +00:00
7e856e5a97
make all 3.6 patches apply and build
...
SVN-Revision: 33911
2012-10-24 13:05:22 +00:00
4afb91a12f
swconfig: get rid of the NLA_PUT_* macros
...
Upstream kernel 3.6 has removed this usage, use the plain functions directly as
intended.
SVN-Revision: 33906
2012-10-24 13:05:04 +00:00
f600ec5b3b
x86: allow both old and new grub signatures in sysupgrade
...
SVN-Revision: 33898
2012-10-23 16:34:00 +00:00
Gabor Juhos
Jonas Gorski
Imre Kaloz
Hauke Mehrtens
Florian Fainelli
John Crispin
Luka Perkov
Jo-Philipp Wich
Felix Fietkau