hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
20,060 Commits
5 Branches
29 Tags
202 MiB
Commit Graph

204 Commits (102c6df148ee4b5df368c32e282e31f37f26363f)

Author SHA1 Message Date
Gabor Juhos c00b53f3d0 ar71xx: move micrel PHY driver to the generic linux target 
SVN-Revision: 30946
 2012-03-15 09:25:53 +00:00
Gabor Juhos ff909edf94 ar71xx: ag71xx: fix ARP frame reception on AR934x switch ports 
SVN-Revision: 30926
 2012-03-13 17:29:38 +00:00
Gabor Juhos cd6a4cde13 ar71xx: ag71xx: start aneg on switch PHYs after reset 
SVN-Revision: 30925
 2012-03-13 17:29:37 +00:00
Gabor Juhos 7c9534cfd7 ar71xx: ag71xx: poll PHY status of all available switch ports 
SVN-Revision: 30924
 2012-03-13 17:29:36 +00:00
Gabor Juhos 8449eecf5f ar71xx: ag71xx: allow to use port 5 of the AR934x built-in switch 
SVN-Revision: 30923
 2012-03-13 17:29:34 +00:00
Gabor Juhos c455a0f7be ar71xx: ag71xx: fix get_port_link callback 
SVN-Revision: 30841
 2012-03-07 16:32:35 +00:00
Gabor Juhos 5a83b3a5c7 ar71xx: ag71xx: use the generic get_port_link implementation 
SVN-Revision: 30840
 2012-03-07 16:32:34 +00:00
Gabor Juhos 7052847972 ar71xx: ag71xx: keep VLAN tags if VLAN is not enabled 
SVN-Revision: 30768
 2012-03-01 19:49:05 +00:00
Gabor Juhos 766999085a ar71xx: ag71xx: add BQL support 
It will be usable only from linux-3.3.

Based on a patch by Dave Taht <dave.taht@bufferbloat.net>

SVN-Revision: 30417
 2012-02-10 14:56:47 +00:00
Gabor Juhos 32a18a05f8 ar71xx: add preliminary support for 3.3 
SVN-Revision: 30410
 2012-02-10 11:53:56 +00:00
Gabor Juhos d72bde99cd ar71xx: merge files-3.2 to files 
SVN-Revision: 30405
 2012-02-10 08:19:31 +00:00
Gabor Juhos 386cbfe45b ar71xx: move arch specific files to files-2.6.39 
SVN-Revision: 29867
 2012-01-22 22:38:11 +00:00
Gabor Juhos f90e578903 ar71xx: include linux/module.h in the micrel phy driver 
SVN-Revision: 29848
 2012-01-22 13:51:49 +00:00
Gabor Juhos 8c2482f76e ar71xx: ag71xx: implement get_port_{link,stats} callbacks 
SVN-Revision: 29626
 2011-12-31 15:02:26 +00:00
Felix Fietkau db0a1db257 ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547) 
SVN-Revision: 29598
 2011-12-22 05:43:53 +00:00
Gabor Juhos 36bc2c2c80 ar71xx: ag71xx: fix switch port setup for AR934X 
SVN-Revision: 29554
 2011-12-15 22:25:32 +00:00
Gabor Juhos 00667c3846 ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X 
SVN-Revision: 29553
 2011-12-15 22:25:30 +00:00
Gabor Juhos 0540970345 ar71xx: ag71xx: setup switch interface mode on AR934X 
SVN-Revision: 29552
 2011-12-15 22:25:29 +00:00
Gabor Juhos 44014110b8 ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs 
SVN-Revision: 29551
 2011-12-15 22:25:28 +00:00
Gabor Juhos 9ae65588d8 ar71xx: introduce ar71xx_switch_data 
SVN-Revision: 29549
 2011-12-15 22:25:11 +00:00
Gabor Juhos b7d7481b07 ar71xx: ag71xx: check PHY IDs before accessing the switch registers 
SVN-Revision: 29541
 2011-12-15 13:25:23 +00:00
Gabor Juhos 0655552860 ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724x 
SVN-Revision: 29540
 2011-12-15 13:25:21 +00:00
Gabor Juhos 204fc6bed5 ar71xx: ag71xx: nuke ar7240sw_init 
SVN-Revision: 29539
 2011-12-15 13:25:20 +00:00
Gabor Juhos d2316b2a45 ar71xx: ag71xx: add support for getting switch port link status 
SVN-Revision: 29017
 2011-11-13 11:27:04 +00:00
Gabor Juhos 34015ed6e8 ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx 
SVN-Revision: 29015
 2011-11-13 11:27:01 +00:00
Gabor Juhos 2d882cff23 ar71xx: ag71xx: remove unused mii_cfg related functions and defines 
SVN-Revision: 29014
 2011-11-13 11:27:00 +00:00
Gabor Juhos 538a9493b9 ar71xx: set MII interface speed from the set_speed callbacks 
SVN-Revision: 29013
 2011-11-13 11:26:59 +00:00
Gabor Juhos 93cd46be13 ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data 
Also rename the corresponding callback functions.

SVN-Revision: 29012
 2011-11-13 11:26:57 +00:00
Gabor Juhos 9579bb4267 ar71xx: ag71xx: remove MII interface setup code 
SVN-Revision: 29011
 2011-11-13 11:26:56 +00:00
Gabor Juhos 2f9e535e89 ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered 
SVN-Revision: 28977
 2011-11-12 10:54:16 +00:00
Felix Fietkau 7a2efd8c28 ar71xx: remove dead code 
SVN-Revision: 28851
 2011-11-08 00:33:20 +00:00
Felix Fietkau 94309039b7 ar71xx: on ar7240, exclude ports from their own port vlan destination mask 
SVN-Revision: 28850
 2011-11-08 00:33:15 +00:00
Jonas Gorski c674c874b7 ag71xx: close a race between the phy state machine and link state 
A fast stop/start cycle could leave the ag71xx interrupts and tx engine
disabled when using a phy driver with a fixed link and the start/stop
happens between two phy state machine polls.

Prevent this by always forcing the link down on stop regardless of phy
state and having a phy connected.

SVN-Revision: 28380
 2011-10-08 11:37:14 +00:00
Felix Fietkau 1bdf65f580 ar71xx: fix register range check for DMA stuck checks (thx, Frédéric Moulins) 
SVN-Revision: 28213
 2011-09-11 17:44:12 +00:00
Felix Fietkau 12c84f8eeb ar71xx: add some code to detect DMA stuck conditions on ar7240 
SVN-Revision: 27975
 2011-08-13 22:30:14 +00:00
Felix Fietkau 85ccc74e1b ar71xx: on ar724x only reset the link status in the restart handler, the fast reset takes care of DMA stuck issues 
SVN-Revision: 27973
 2011-08-13 21:49:46 +00:00
Felix Fietkau 4b75394056 ar71xx: fix ethernet FIFO state corruption on ar7240 
When starting/stopping DMA sometimes the FIFO state gets corrupted,
leading to wildly fluctuating latencies or packet data corruption.
Fix this by issuing a fast MAC reset as soon as the link is detected
as up. Fixes #9689, #9405

SVN-Revision: 27896
 2011-08-04 17:36:31 +00:00
Felix Fietkau d2aeca6b6d ag71xx: fix memory corruption issues on ar7240 on ethernet start/stop 
When the DMA engine state gets corrupted due to a hardware issues, it
often won't stop rx until a full reset is issued. In that case the hardware
must keep a valid descriptor, otherwise it will write to random places in
system RAM, triggering random crashes. To fix this, keep a dummy descriptor
without a buffer that keeps the DMA engine in a sane state until the reset
is done

SVN-Revision: 27895
 2011-08-04 17:36:27 +00:00
Felix Fietkau 500c3a1475 ar71xx: fix MAC/MDIO reset mask handling 
SVN-Revision: 27894
 2011-08-04 17:36:23 +00:00
Felix Fietkau c7173a211d ar71xx: reinitialize global switch settings after reset on ar7240 
SVN-Revision: 27705
 2011-07-20 14:39:47 +00:00
Felix Fietkau ca473833c4 ar71xx: configure address aging on ar7240 
SVN-Revision: 27704
 2011-07-20 14:39:42 +00:00
Felix Fietkau fefc79f3cb ar71xx: reset the phy in the ethernet init on ar724x 
SVN-Revision: 27703
 2011-07-20 12:04:34 +00:00
Felix Fietkau 005fe5d1fd ar71xx: make sure that rx and interrupts are disabled before issuing the hardware reset 
SVN-Revision: 27702
 2011-07-20 12:04:29 +00:00
Felix Fietkau e7ab000008 ar71xx: increase the delay after the ethernet MAC reset 
SVN-Revision: 27701
 2011-07-20 12:04:25 +00:00
Felix Fietkau 255dcaa3a6 ar71xx: fix an unused variable warning 
SVN-Revision: 27700
 2011-07-20 12:04:20 +00:00
Felix Fietkau f3d693c0ee ar71xx: do not reset the hardware on transmit timeout - this would mess up the up the PHY state 
SVN-Revision: 27568
 2011-07-09 06:30:13 +00:00
Felix Fietkau 2806c75c07 ag71xx: keep the rx engine stopped while the link is not up, should hopefully fix stability issues from #9405 
SVN-Revision: 27567
 2011-07-09 06:29:46 +00:00
Felix Fietkau 31dd60689e Revert "ar71xx: only enable the rx engine after the link is up..." 
It messes up the DMA state when the link goes down

SVN-Revision: 27088
 2011-06-01 18:15:43 +00:00
Gabor Juhos 60d5abbc27 ar71xx: ag71xx: make ring sizes configurable via ethtool 
SVN-Revision: 27041
 2011-05-31 22:53:10 +00:00
Gabor Juhos 7a2651f633 ar71xx: ag71xx: prepare to make ring sizes configurable 
SVN-Revision: 27040
 2011-05-31 22:53:09 +00:00