Commit Graph

7083 Commits (0df7ae04187da7634159242e29ea3201f172ef6d)

Author SHA1 Message Date
Gabor Juhos 575a5286c8 ramips: use lowercase partiion names on the WCR150GN board
SVN-Revision: 27387
2011-07-03 15:01:53 +00:00
Gabor Juhos 31facf0b75 ramips: use different partition names in the DIR-300-B1 image
SVN-Revision: 27386
2011-07-03 15:01:52 +00:00
Gabor Juhos dbe55f08f0 ramips: force word write on flashes with AMD cmdset (#9252)
SVN-Revision: 27385
2011-07-03 15:01:51 +00:00
Gabor Juhos f1cf43d468 ramips: update partition map for DIR-300-B1
Patch by Layne Edwards from #9252.

SVN-Revision: 27384
2011-07-03 15:01:49 +00:00
Gabor Juhos 641c87b127 ramips: consistently use 'firmware' name for sysupgrade partitions
SVN-Revision: 27383
2011-07-03 15:01:48 +00:00
Gabor Juhos 381d7f05af ramips: fix a section mismatch warning
SVN-Revision: 27382
2011-07-03 15:01:46 +00:00
Gabor Juhos 16ad91d69f ramips: remove unused include from the common GPIO code
SVN-Revision: 27381
2011-07-03 15:01:44 +00:00
Gabor Juhos c9f3e7082f ramips: disable watchdog on sysupgrade
SVN-Revision: 27380
2011-07-03 15:01:43 +00:00
Gabor Juhos e70e6f6848 ramips: swap target check in image generation
SVN-Revision: 27379
2011-07-03 15:01:42 +00:00
Gabor Juhos affb57ee27 ramips: update HW550-3G mtd partitions
This patch updates the mtd partitions for the Aztech HW550-3G

Signed-off-by: Layne Edwards <ledwards@astrumtech.net>

SVN-Revision: 27378
2011-07-03 15:01:41 +00:00
Gabor Juhos 3099ffe414 ramips: set cp0_perfcount_irq for RT305X
SVN-Revision: 27377
2011-07-03 15:01:40 +00:00
Daniel Dickinson f9f3ddebe8 target/patches: This has been sent upstream, but might not appear for a couple of weeks.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27373
2011-07-03 03:20:04 +00:00
Daniel Dickinson b0cc0067f9 target/patches: Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27371
2011-07-03 03:14:53 +00:00
Daniel Dickinson f2d749ee15 Revert "Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped."
This reverts commit c485487b63d1c1de72a375f1278d8a98546ba3af.

SVN-Revision: 27370
2011-07-03 03:14:51 +00:00
Daniel Dickinson 209a776f22 Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27369
2011-07-03 03:14:48 +00:00
Daniel Dickinson 88dcf8629d The Geode CS5535 and CS5536 companion chips are backward compatible with the SCx200 I2C drivers.
Include this on Geos.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27368
2011-07-03 02:59:00 +00:00
Gabor Juhos b3a89652a5 ar71xx: use 4k image only for the AP121 board
Create optimized 64K images with the new padjffs2 tool and use that
images instead of the 4k ones. The 4k images causes problems on devices
where the flash erase size is 64 KB.

SVN-Revision: 27357
2011-07-02 08:37:59 +00:00
Imre Kaloz ea8440f4c3 cns21xx belongs to the Econa family, too
SVN-Revision: 27354
2011-07-02 08:31:25 +00:00
Imre Kaloz 535cae8393 mark it broken
SVN-Revision: 27349
2011-07-02 07:26:04 +00:00
Jo-Philipp Wich 701543d3ef revert r27043 (#9513)
SVN-Revision: 27343
2011-07-01 19:52:57 +00:00
Jo-Philipp Wich 1edef5ec98 revert r27341, it introduce wrong behaviour for other models
SVN-Revision: 27342
2011-07-01 19:15:45 +00:00
Jo-Philipp Wich 3b3103b2f1 turn status LED off if device finished initializing
SVN-Revision: 27341
2011-07-01 18:39:53 +00:00
Imre Kaloz 0ba94475c9 upgrade avr32 u-boot to 2011.06
SVN-Revision: 27330
2011-07-01 11:32:01 +00:00
Imre Kaloz 84c89fb02d upgrade to 2.6.39.2
SVN-Revision: 27329
2011-07-01 11:31:08 +00:00
Imre Kaloz b655c7c85a preliminary 3.0 support
SVN-Revision: 27328
2011-07-01 08:15:48 +00:00
Imre Kaloz 8222c7bb24 add missing kernel symbols
SVN-Revision: 27327
2011-07-01 08:11:16 +00:00
Felix Fietkau a41f80bca1 fix the gpio_dev driver: remove existing forward port patches, use unlocked_ioctl on all platforms and fix the arguments to the ioctl handler (based on patch from #9198)
SVN-Revision: 27322
2011-07-01 03:20:13 +00:00
Gabor Juhos f9e4619b97 ar71xx: remove CONFIG_MTD_CONCAT ifdefs from the WZR-HP-AG300H code
The config option has been removed in 2.6.39.

SVN-Revision: 27320
2011-06-30 12:15:33 +00:00
Hauke Mehrtens 8976fa2622 brcm47xx: deactivate wndr3400 for now as this device will not boot
SVN-Revision: 27316
2011-06-29 17:42:34 +00:00
Gabor Juhos d98476c6bd ar71xx: merge 2.6.39 patches
Also remove the old UART driver for ar933x.

SVN-Revision: 27314
2011-06-29 08:57:37 +00:00
Gabor Juhos 74a88749f3 ar71xx: remove 2.6.37 support as well
SVN-Revision: 27313
2011-06-29 08:57:36 +00:00
Gabor Juhos 1d5378f588 ar71xx: remove 2.6.38 support
SVN-Revision: 27312
2011-06-29 08:57:34 +00:00
Gabor Juhos 36e7a8b33e ar71xx: switch to 2.6.39
SVN-Revision: 27311
2011-06-29 08:57:33 +00:00
Gabor Juhos 6627574e57 ar71xx: add 2.6.39 support
SVN-Revision: 27310
2011-06-29 08:57:32 +00:00
Gabor Juhos 1e138098cd ar71xx: remove ar71xx_gpio_irq_set_type
SVN-Revision: 27309
2011-06-29 08:57:30 +00:00
Gabor Juhos 055e317ed8 ar71xx: add separate handlers for IP3 interrupts
SVN-Revision: 27308
2011-06-29 08:57:29 +00:00
Gabor Juhos 59bff8bf18 ar71xx: use separate handlers for IP2 interrupts
SVN-Revision: 27307
2011-06-29 08:57:28 +00:00
Gabor Juhos 9d6af600e1 ar71xx: remove useless irq_desc.status initializations
SVN-Revision: 27306
2011-06-29 08:57:27 +00:00
Gabor Juhos 01ac07c9b3 generic: add MTD_NAND_ECC_BCH symbol for 2.6.39/3.0
SVN-Revision: 27305
2011-06-29 08:57:25 +00:00
Hauke Mehrtens 8c62c5d109 brcm47xx: generate image to flash on Netgear WNDR3400.
The image will not boot because serial flash support is missing this is only for experts.

SVN-Revision: 27302
2011-06-28 22:23:21 +00:00
Hauke Mehrtens 4c18da3df6 brcm47xx: add initial support for devices with bcma bus.
Ethernet and wifi are not working and this is highly experimental.

SVN-Revision: 27301
2011-06-28 22:21:57 +00:00
Hauke Mehrtens 3f0eed15a2 kernel: refresh patches for kernel 3.0-rc5
SVN-Revision: 27300
2011-06-28 20:25:39 +00:00
Hauke Mehrtens 2af4f6f634 kernel: update ssb and bcma to linux-next next-20110628
SVN-Revision: 27299
2011-06-28 19:33:50 +00:00
Hauke Mehrtens c5821c1a3a kernel: update kernel to 2.6.39.2
SVN-Revision: 27298
2011-06-28 19:30:58 +00:00
Imre Kaloz e80ebb769f ethernet cleanup and sata fix - thanks, Chris
SVN-Revision: 27297
2011-06-28 06:54:20 +00:00
Hauke Mehrtens 4c392185a6 brcm47xx: update kernel to version 2.6.39
SVN-Revision: 27296
2011-06-27 21:29:20 +00:00
Hauke Mehrtens ca979845cc kernel: update ssb and bcma to linux-next next-20110627
SVN-Revision: 27295
2011-06-27 21:28:40 +00:00
Hauke Mehrtens e439de144f brcm47xx: fix Linux-3.0 and fix clock rate detection.
SVN-Revision: 27294
2011-06-27 20:20:11 +00:00
Hauke Mehrtens c1873c46b8 kernel: update ssb and bcma to linux-next next-20110627
SVN-Revision: 27293
2011-06-27 20:18:49 +00:00
Jo-Philipp Wich 2c6bd71767 remove remaining uci-defaults
SVN-Revision: 27291
2011-06-27 01:42:31 +00:00
Florian Fainelli 9f63b7326f geos: deprecate uci-defaults files
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 27287
2011-06-25 22:05:10 +00:00
Florian Fainelli 1f6047496e alix2: add config files for bridging
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 27286
2011-06-25 22:05:05 +00:00
Florian Fainelli 3f40c0f7df remove gpiodev, prefer sysfs gpio
SVN-Revision: 27284
2011-06-25 19:26:17 +00:00
Felix Fietkau cc56af716c ar71xx: add default network config for wzr-hp-ag300h (based on a patch from #9607)
SVN-Revision: 27283
2011-06-25 13:54:42 +00:00
Felix Fietkau ed7f41792a ar71xx: bring up secondary radio on wzr-hp-ag300h (fixes #9608)
SVN-Revision: 27282
2011-06-25 13:48:47 +00:00
Florian Fainelli 85d29f3cd0 add missing linux-3.0 config symbol
SVN-Revision: 27269
2011-06-24 11:43:30 +00:00
Florian Fainelli f6e4eb15bc register SSB sprom after ethernet devices
In case the MAC address pool is not big enough to also register a SSB SPROM
prefer registering the Ethernet devices.

SVN-Revision: 27258
2011-06-22 12:32:03 +00:00
Florian Fainelli 5a76c6bdd7 fix tab damage in 141-led_count.patch
SVN-Revision: 27254
2011-06-21 20:52:58 +00:00
Florian Fainelli 3f0f8d9c87 fix and make usable kmod-pcmcia-rsrc
This module is also needed for e.g: kmod-bcm63xx-pcmcia

SVN-Revision: 27253
2011-06-21 20:52:53 +00:00
Hauke Mehrtens 1c0d5f5ae2 kernel: refresh patches for kernel 3.0-rc4
SVN-Revision: 27247
2011-06-21 18:39:47 +00:00
Florian Fainelli 9bdf6abb9d use macros to generate SPI registers table and switches
SVN-Revision: 27246
2011-06-21 10:05:51 +00:00
Florian Fainelli 6cb3195b40 fix usb mis-cleanup after r27162 (#9581)
SVN-Revision: 27243
2011-06-20 10:04:53 +00:00
Jo-Philipp Wich 70fb318a90 Restrict Soekris specific base-files handling to Soekris profiles, based on patch by Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27241
2011-06-19 23:05:21 +00:00
Jo-Philipp Wich 9cd64fa754 generic: Remove IPv6 depependency of bridge in 2.6.38+ Since 2.6.38 the bridge module has a dependency to IPv6 if IPv6 is enabled. Since the IPv6 module isn't exactly lightweight and bridge also only needs a single function from IPv6, it's rather easy to create a common "lib" module with a RCU pointer to the actual implementation, if the IPv6 module is loaded (although slightly hackish).
The codepath seems to be only taken when using IPv6, so there should be
no negative side effects when IPv6 isn't loaded. I did not measure how
big the performance impact is.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27237
2011-06-19 22:48:53 +00:00
Florian Fainelli ab74628c10 dev-spi.c checks for running CPU, not board code
SVN-Revision: 27236
2011-06-19 20:46:00 +00:00
Florian Fainelli 4dd4cbeb43 fixup patches after r27234
SVN-Revision: 27235
2011-06-19 20:28:38 +00:00
Florian Fainelli 7819b530da remove accidental bcm6345 related patches
SVN-Revision: 27234
2011-06-19 20:16:59 +00:00
Florian Fainelli 12db3df666 remove support for 2.6.37 and 2.6.38
SVN-Revision: 27233
2011-06-19 20:14:22 +00:00
Florian Fainelli 6bb0a608dc switch to 2.6.39
SVN-Revision: 27232
2011-06-19 20:12:45 +00:00
Florian Fainelli bcada2640b remove 2.6.35 and 2.6.32 support
SVN-Revision: 27230
2011-06-19 20:09:40 +00:00
Florian Fainelli 67d0ca0b4b remove pre 2.6.39 patches and config
SVN-Revision: 27229
2011-06-19 20:09:00 +00:00
Florian Fainelli 34db3f9f86 remove 2.6.37 patches and config
SVN-Revision: 27228
2011-06-19 20:07:26 +00:00
Gabor Juhos e6af77a1c8 ar71xx: cleanup AR933X UART driver
SVN-Revision: 27222
2011-06-19 13:17:51 +00:00
Gabor Juhos 066e04d497 ar71xx: fix uart clock frequency for AR933X
SVN-Revision: 27221
2011-06-19 13:17:50 +00:00
Hauke Mehrtens 47e218c426 brcm47xx: refresh patches
SVN-Revision: 27219
2011-06-18 15:53:14 +00:00
Hauke Mehrtens 79a7343560 kernel: update to kernel 2.6.38.8
SVN-Revision: 27218
2011-06-18 15:52:15 +00:00
Hauke Mehrtens 75f9e0c615 brcm47xx: add support for kernel 3.0
SVN-Revision: 27217
2011-06-18 15:24:44 +00:00
Rod Whitby 710409740e ixp4xx: Removed kmod-madwifi from the NSLU2 profile, as the NSLU2 has not wifi capability out of the box.
SVN-Revision: 27202
2011-06-17 11:22:22 +00:00
Florian Fainelli b97459eb88 add missing USBIP_CORE item in config-3.0
SVN-Revision: 27195
2011-06-16 14:34:50 +00:00
Florian Fainelli 540b838998 allow any console to be used
SVN-Revision: 27193
2011-06-16 14:34:44 +00:00
Florian Fainelli 426dccd019 bcm63xx: Add support for Linux 3.0-rc3
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27192
2011-06-16 14:34:40 +00:00
Hauke Mehrtens 235e331987 linux/generic: Add support for 3.0-rc3
Also make linux identify itself properly as 3.0, not 3.0.0.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27191
2011-06-15 21:31:01 +00:00
Hauke Mehrtens bf64ac730a bcm47xx: Remove kernel checks from image Makefile
2.4 isn't present anymore, so it will always be 2.6 (or newer). Since the
2.6 check will break with 3.0, remove it alltogether.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27185
2011-06-15 21:11:49 +00:00
Jo-Philipp Wich 5752efdadd 2.6.39.1: missing kernel symbols If you turn on I2C, you'll need this symbol defined.
Signed-off-by: Philip A. Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27182
2011-06-15 18:18:32 +00:00
Felix Fietkau dcddcfca24 add missing kernel config symbols for usb on powerpc
SVN-Revision: 27181
2011-06-15 18:07:26 +00:00
Jo-Philipp Wich d39379296c backport upstream Kernel commit 1ed2f73d90fb49bcf5704aee7e9084adb882bfc5 (netfilter: IPv6: fix DSCP mangle code)
SVN-Revision: 27179
2011-06-15 14:11:33 +00:00
Jo-Philipp Wich 14913ab8b0 revert r26997, it does not apply against 2.6.36.4
SVN-Revision: 27178
2011-06-15 13:51:57 +00:00
Florian Fainelli 685a61eb6c switch to 2.6.39
SVN-Revision: 27175
2011-06-14 20:05:13 +00:00
Florian Fainelli 0fb8884efe fix diag.sh with qube2 front led
SVN-Revision: 27174
2011-06-14 20:05:09 +00:00
Florian Fainelli dee0010ae2 resync kernel config
SVN-Revision: 27173
2011-06-14 20:05:03 +00:00
John Crispin 0732b2db78 Fix for bug where the iniatialisation of the MAC data private strucure
is copied into the wrong location.

Ticket #9547

Signed-off-by: Conor O'Gorman <conor at dna.ie>

SVN-Revision: 27172
2011-06-13 22:37:23 +00:00
Florian Fainelli 7a96525a6f replace unfortify patch with a better one
Thanks to Richard Weinberger for providing this patch

SVN-Revision: 27168
2011-06-13 12:45:12 +00:00
Gabor Juhos b7e016ba42 ar71xx: use ar933x_uart.h in the AR933X serial driver
SVN-Revision: 27166
2011-06-13 08:12:40 +00:00
Gabor Juhos b58ede16a5 ar71xx: update early_printk code
SVN-Revision: 27165
2011-06-13 08:12:38 +00:00
Florian Fainelli 6a5112a750 cleanup files using checkpatch.pl
SVN-Revision: 27162
2011-06-12 19:17:57 +00:00
John Crispin fa59bb0958 * move patches around * add basic support for gigaset sx76x
SVN-Revision: 27158
2011-06-12 08:56:26 +00:00
Vasilis Tsiligiannis 70106f153d Remove trailing spaces, convert spaces to tabs
SVN-Revision: 27153
2011-06-09 19:30:50 +00:00
John Crispin e3e2a170cd we dont need 1024 bytes buffer. 128 bytes is enough.
SVN-Revision: 27143
2011-06-09 07:08:54 +00:00
John Crispin 8329ecf92c * revert accidental config change
SVN-Revision: 27142
2011-06-09 05:10:18 +00:00
John Crispin ed0e649a5b * fixes spi flash for ar9
* adds limited support for netgear dgn3500 (enough for others to start working with)

SVN-Revision: 27137
2011-06-08 17:57:55 +00:00
Felix Fietkau 9160e06af5 ar71xx: override inittab to enable login on ttyATH0
SVN-Revision: 27128
2011-06-07 17:07:10 +00:00
Florian Fainelli e7b6721f4e update to 2.6.39.1
SVN-Revision: 27114
2011-06-04 18:27:14 +00:00
Florian Fainelli d97f50b69b define UIMAGE for various rootfs targets
SVN-Revision: 27113
2011-06-04 18:27:09 +00:00
Florian Fainelli 429745edd6 use IMG_PREFIX for image name
SVN-Revision: 27112
2011-06-04 18:27:04 +00:00
Florian Fainelli 4aaf590909 add more config symbols to 2.6.39
SVN-Revision: 27111
2011-06-04 18:27:00 +00:00
Florian Fainelli 89dd8aed1f update to 2.6.39.1
SVN-Revision: 27110
2011-06-04 18:26:54 +00:00
Florian Fainelli 72996d2dcb update to 2.6.39.1
SVN-Revision: 27107
2011-06-04 13:36:09 +00:00
Florian Fainelli 20c0427132 update to 2.6.39.1
SVN-Revision: 27106
2011-06-04 13:36:05 +00:00
Florian Fainelli de2e05b6f2 add some missing 2.6.39 config symbols
SVN-Revision: 27105
2011-06-04 13:36:00 +00:00
Florian Fainelli 763b58c30c update to 2.6.39.1
patch from Peter Wagner

SVN-Revision: 27104
2011-06-04 13:35:55 +00:00
Gabor Juhos 13363d9129 ar71xx: setup wdt_clock for AR913X to avoid a kernel bug
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27102
2011-06-04 12:30:10 +00:00
Gabor Juhos ae2cbfa1e8 ar71xx: select the internal antenna by default on the ZCN-1523H boards
SVN-Revision: 27101
2011-06-04 12:30:09 +00:00
Florian Fainelli 0de25d1263 update to 2.6.39
SVN-Revision: 27090
2011-06-02 13:45:20 +00:00
Felix Fietkau 31dd60689e Revert "ar71xx: only enable the rx engine after the link is up..."
It messes up the DMA state when the link goes down

SVN-Revision: 27088
2011-06-01 18:15:43 +00:00
Gabor Juhos 750af1522b ar71xx: init external_reset for AR933X
SVN-Revision: 27083
2011-06-01 13:12:30 +00:00
Gabor Juhos af4cae4498 ar71xx: add external_reset field to ath9k_platform_data
SVN-Revision: 27082
2011-06-01 13:12:28 +00:00
Gabor Juhos f0c7b93e5d ar71xx: init get_mac_revision on AR9330 rev 1
SVN-Revision: 27081
2011-06-01 13:12:27 +00:00
Gabor Juhos 1a54e33c17 ar71xx: add get_mac_revision to ath9k_platform_data
SVN-Revision: 27080
2011-06-01 13:12:26 +00:00
Gabor Juhos 34ff32a6eb ar71xx: export SoC revision
SVN-Revision: 27079
2011-06-01 13:12:24 +00:00
Imre Kaloz 2440175978 refresh patches
SVN-Revision: 27078
2011-06-01 07:24:41 +00:00
Imre Kaloz aafa838d77 fixup second led, patch from Chris
SVN-Revision: 27077
2011-06-01 07:21:25 +00:00
Felix Fietkau 86dbc3a02d ar71xx: add profile and image building code for wzr-hp-ag300h
SVN-Revision: 27076
2011-06-01 02:23:30 +00:00
Felix Fietkau 4f06b8263a ar71xx: add kernel support for the buffalo wzr-hp-ag300h
SVN-Revision: 27075
2011-06-01 02:23:26 +00:00
Felix Fietkau 56dd5c4388 fix a crash in mtd_concat when the .sync op is not implemented
SVN-Revision: 27074
2011-06-01 02:23:22 +00:00
Felix Fietkau 628cb35179 m25p80: add the chip id for the winbond w25q128 chip
SVN-Revision: 27073
2011-06-01 02:23:18 +00:00
Imre Kaloz acbb2db5e2 fixup pcie clock, thanks Chris
SVN-Revision: 27072
2011-05-31 23:55:33 +00:00
Gabor Juhos 33fdc21d40 ar71xx: build images for the AP121 boards
SVN-Revision: 27070
2011-05-31 22:53:47 +00:00
Gabor Juhos 9e435c03e0 ar71xx: add sysupgrade support for the AP121 boards
SVN-Revision: 27069
2011-05-31 22:53:45 +00:00
Gabor Juhos 646937135f ar71xx: add default network config for the AP121 boards
SVN-Revision: 27068
2011-05-31 22:53:44 +00:00
Gabor Juhos f332dbd7be ar71xx: add support for the AP121/AP121-MINI reference boards
SVN-Revision: 27067
2011-05-31 22:53:43 +00:00
Gabor Juhos 8beff081eb ar71xx: register UART for the AR933X SoCs
SVN-Revision: 27066
2011-05-31 22:53:42 +00:00
Gabor Juhos b460bc6f12 ar71xx: add serial driver for the AR933X UART
SVN-Revision: 27065
2011-05-31 22:53:40 +00:00
Gabor Juhos c34e0cbc4c ar71xx: add WMAC initialization code for the AR933X SoCs
SVN-Revision: 27064
2011-05-31 22:53:39 +00:00
Gabor Juhos e8a0aaf9a2 ar71xx: add ethernet initialization for the AR933X SoCs
SVN-Revision: 27063
2011-05-31 22:53:37 +00:00
Gabor Juhos e0a0f3796a ar71xx: enable USB support for the AR933x SoCs
SVN-Revision: 27062
2011-05-31 22:53:36 +00:00
Gabor Juhos 677c80ee17 ar71xx: add AR933x specific glue for ar71xx_device{start,stop}
SVN-Revision: 27061
2011-05-31 22:53:35 +00:00
Gabor Juhos 88c45e3130 ar71xx: the watchdog uses the reference clock on the AR933x SoCs
SVN-Revision: 27060
2011-05-31 22:53:34 +00:00
Gabor Juhos 7acbacab8c ar71xx: add AR933x specific glue code for IRQ initialization
SVN-Revision: 27059
2011-05-31 22:53:32 +00:00
Gabor Juhos e6fde61bec ar71xx: don't register 8250 UART on the AR933x SoCs
SVN-Revision: 27058
2011-05-31 22:53:31 +00:00
Gabor Juhos 8f7541a044 ar71xx: enable GPIO support for the AR933x SoCs
SVN-Revision: 27057
2011-05-31 22:53:30 +00:00
Gabor Juhos e11b9c8371 ar71xx: add AR933x specific frequency initialization code
SVN-Revision: 27056
2011-05-31 22:53:29 +00:00
Gabor Juhos 0bf4478d37 ar71xx: add AR933x specific early_printk support
SVN-Revision: 27055
2011-05-31 22:53:27 +00:00
Gabor Juhos 6b3ca9ef0b ar71xx: add preliminary support for the Atheros AR933x SoCs
SVN-Revision: 27054
2011-05-31 22:53:26 +00:00
Gabor Juhos 761e67b394 ar71xx: stop producing -NA factory images and tag factory images with hd_id for WNDR3700v2
NETGEAR doesn’t produce a distinct North American image for
WNDR3700v2, they use the same image worldwide. This is a change from
earlier models such as WNDR3700 (v1). NETGEAR's v2 images now contain
an "hd_id" parameter, as well. All observed WNDR3700v2, WNDR3800, and
WNDRMAC images use 29763654+16+64 as their hd_id value.

This patch changes the OpenWrt WNDR3700v2 "factory" image generation
to stop producing the extraneous -NA version and to tag the image with
the same hd_id used in NETGEAR's images.

There is no change to WNDR3700 (v1) image generation, as NETGEAR
continues to produce distinct -NA and worldwide images, neither of
which are tagged with hd_id.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 27053
2011-05-31 22:53:25 +00:00
Gabor Juhos c8d182406d ar71xx: create factory images for the WZR-HP-G30{0,1}NH boards
SVN-Revision: 27051
2011-05-31 22:53:22 +00:00
Gabor Juhos 0677e16248 ar71xx: Fix header offset for newer WRT160NL models
Newer WRT160NLs have a flash chip with 4K erase blocks instead of 64K,
resulting in miscalculated partition sizes.
Since the actual sizes did not change, hardcode them to their current
sizes, and make sure they are at least one erase block big (in case Cisco
decides to start to use chips with 128K erase blocks).

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27049
2011-05-31 22:53:20 +00:00
Gabor Juhos be97e2a043 ar71xx: add SOC_AR{71XX,724X,913X,934X} config symbols
SVN-Revision: 27048
2011-05-31 22:53:19 +00:00
Gabor Juhos ea2f6d0edf ar71xx: reduce the size of the squashfs-4k binaries
SVN-Revision: 27047
2011-05-31 22:53:18 +00:00
Gabor Juhos 5d5f72415e ar71xx: initialize is_clk_25mhz field for AR9340 WMAC
SVN-Revision: 27045
2011-05-31 22:53:15 +00:00
Gabor Juhos f7b3c3dfd1 ar71xx: sync ath9k_platform_data.h with compat-wireless
SVN-Revision: 27044
2011-05-31 22:53:14 +00:00