Florian Fainelli
|
b9c0291e32
|
prevent gpio-buttons registration failure
SVN-Revision: 17542
|
2009-09-08 15:24:06 +00:00 |
Florian Fainelli
|
8ceff55a08
|
fix typos against the gpio buttons driver (#5804)
SVN-Revision: 17538
|
2009-09-07 18:17:45 +00:00 |
Florian Fainelli
|
65fa1debda
|
add infrastructure to register gpio-input reset button
SVN-Revision: 17526
|
2009-09-06 13:54:17 +00:00 |
Florian Fainelli
|
294ec33e47
|
fix reboot hang on bcm6345, thanks AndyI
SVN-Revision: 17465
|
2009-09-02 08:32:00 +00:00 |
Florian Fainelli
|
3fd180eb53
|
add missing patch which fakes a cardbus controller on top of PCI, thanks SGDA
SVN-Revision: 17234
|
2009-08-12 08:41:47 +00:00 |
Florian Fainelli
|
dd8b0f9fb9
|
more bcm63xx definition fixes, thanks AndyI
SVN-Revision: 17227
|
2009-08-11 18:50:07 +00:00 |
Florian Fainelli
|
85698765da
|
add support for the Pirelli AG226G board (#5337)
SVN-Revision: 17190
|
2009-08-09 10:19:47 +00:00 |
Florian Fainelli
|
5138aa203e
|
bcm6345 fixes from AndyI
SVN-Revision: 17153
|
2009-08-06 20:33:42 +00:00 |
Florian Fainelli
|
48c1634d3e
|
fix off-by-one maximum timeout in the wathchdog default counter for bcm6345, thanks AndyI
SVN-Revision: 17149
|
2009-08-06 18:53:44 +00:00 |
Florian Fainelli
|
dd78f746a5
|
disable watchdog for bcm6345 until it gets fixed
SVN-Revision: 17148
|
2009-08-06 18:44:20 +00:00 |
Florian Fainelli
|
e58d0f346d
|
more bcm6345 fixes and definitions, thanks to AndyI
SVN-Revision: 17066
|
2009-07-31 20:15:43 +00:00 |
Florian Fainelli
|
9887dc6100
|
add experimental support for 2.6.28.10, tested on bcm6338
SVN-Revision: 17054
|
2009-07-30 21:29:25 +00:00 |
Florian Fainelli
|
dabf5e71a6
|
fix typo for the flash start address on bcm6345
SVN-Revision: 17032
|
2009-07-27 22:31:28 +00:00 |
Florian Fainelli
|
ecad504c39
|
register GPIO-connected LEDs for known boards
SVN-Revision: 16887
|
2009-07-18 00:40:23 +00:00 |
Florian Fainelli
|
d0fdf2c5ed
|
fix comment only valid for bcm6345
SVN-Revision: 16881
|
2009-07-17 15:57:09 +00:00 |
Florian Fainelli
|
0bda624fc7
|
add the infrastructure to use a MPI/GPIO connected VoIP DSP
SVN-Revision: 16650
|
2009-07-01 21:00:41 +00:00 |
Florian Fainelli
|
8a8943671a
|
fixes for the bcm6338 clocks, thanks Maxime
SVN-Revision: 16640
|
2009-07-01 13:49:20 +00:00 |
Florian Fainelli
|
5a7c5b2d36
|
a couple of more fixes to get 6345 booting up to the console handover
SVN-Revision: 16636
|
2009-06-30 13:45:49 +00:00 |
Florian Fainelli
|
8179904540
|
shared DMA zone is twice smaller on 6338
SVN-Revision: 16608
|
2009-06-28 20:06:44 +00:00 |
Florian Fainelli
|
8813961e86
|
bcm6338 can support PCI since it has MPI
SVN-Revision: 16592
|
2009-06-27 21:43:55 +00:00 |
Florian Fainelli
|
ca5de76ed3
|
more fixes for bcm6338, no need not to prevent reads from MPI registers now that we have it defined correctly
SVN-Revision: 16589
|
2009-06-27 20:32:43 +00:00 |
Florian Fainelli
|
d02d75ba02
|
fix the flash address comment and register the flash device again with its proper physical address on 6338/6345
SVN-Revision: 16587
|
2009-06-27 18:58:00 +00:00 |
Florian Fainelli
|
0bb3a46217
|
fix a stupid typo preventing the board from being detected
SVN-Revision: 16586
|
2009-06-27 18:30:45 +00:00 |
Florian Fainelli
|
bcc1dd7f99
|
prevent bcm6338 and bcm6345 from crashing very early
SVN-Revision: 16585
|
2009-06-27 18:23:58 +00:00 |
Florian Fainelli
|
7da8855c79
|
only register fallback sprom and enable PCI if we actually have support for PCI
SVN-Revision: 16581
|
2009-06-27 16:17:18 +00:00 |
Florian Fainelli
|
13a8ed9ca0
|
more missing register definitions for bcm6338
SVN-Revision: 16579
|
2009-06-27 15:51:27 +00:00 |
Florian Fainelli
|
287a2c0ba9
|
more bcm6338 and bcm6345 related fixes
SVN-Revision: 16568
|
2009-06-26 12:34:35 +00:00 |
Florian Fainelli
|
8c4137900c
|
define bcm6338 SDRAM base register and make sure that the right CPU id will be used to detect a bcm6338
SVN-Revision: 16567
|
2009-06-26 11:08:12 +00:00 |
Florian Fainelli
|
e86e91380a
|
add board definitions for the bcm6338w
SVN-Revision: 16565
|
2009-06-26 10:27:13 +00:00 |
Florian Fainelli
|
287a0efd68
|
be SMP safe even with gpiolib
SVN-Revision: 16331
|
2009-06-04 10:02:23 +00:00 |
Florian Fainelli
|
9013e936ed
|
cache gpio values in gpio_set
SVN-Revision: 16330
|
2009-06-04 10:01:55 +00:00 |
Florian Fainelli
|
1208ffaedb
|
use the correct number of GPIOs for bcm6358
SVN-Revision: 16329
|
2009-06-04 10:01:03 +00:00 |
Florian Fainelli
|
c95420f06d
|
register gpiochip earlier, allowing gpio-based runtime detection to be performed in board_init callback
SVN-Revision: 16328
|
2009-06-04 09:59:28 +00:00 |
Florian Fainelli
|
9485c3e834
|
register gpiodev
SVN-Revision: 15509
|
2009-04-30 14:09:01 +00:00 |
Florian Fainelli
|
501ebb4f74
|
enable all blocks on 6338 and uart clock on 6345
SVN-Revision: 14957
|
2009-03-21 10:50:44 +00:00 |
Florian Fainelli
|
0972ee5331
|
add support for bcm6345 SoC, needs testing
SVN-Revision: 14953
|
2009-03-20 15:08:02 +00:00 |
Florian Fainelli
|
32c29f1aaf
|
fix SPI register switch and prepare for UDC, thanks to Henk Vergonet (#4783)
SVN-Revision: 14914
|
2009-03-17 11:28:54 +00:00 |
Florian Fainelli
|
6495fa36ea
|
add support for AGPF-S0 (Pirelli Alice Gate VoIP 2 Plus Wi-Fi) #4366
SVN-Revision: 14850
|
2009-03-12 08:54:04 +00:00 |
Florian Fainelli
|
8065eb4a55
|
do not duplicate fifo_size, since RX and TX fifo sizes are the same, request_mem_region on the registers
SVN-Revision: 14848
|
2009-03-11 10:32:44 +00:00 |
Florian Fainelli
|
1bcf5d0de6
|
fix typo for the bcm6338 spi IRQ, change platform driver name and make the SPI irq be fetchable by platform driver initialization code
SVN-Revision: 14790
|
2009-03-08 12:43:13 +00:00 |
Florian Fainelli
|
bf7f2939c2
|
compile and register SPI controller device
SVN-Revision: 14789
|
2009-03-08 12:18:26 +00:00 |
Florian Fainelli
|
1e92d0355d
|
make bcm6358 consistend with the other boards naming
SVN-Revision: 14788
|
2009-03-08 12:17:19 +00:00 |
Florian Fainelli
|
b1abddb45f
|
fix some SPI register definitions and platform-device registration code
SVN-Revision: 14787
|
2009-03-08 12:13:52 +00:00 |
Florian Fainelli
|
5e8dfe53b6
|
prepare for SPI controller driver
SVN-Revision: 14755
|
2009-03-06 01:15:00 +00:00 |
Florian Fainelli
|
6f484fc283
|
provide a sane SPROMv2 to make on-board bcm4318 card work, thanks mb__
SVN-Revision: 14683
|
2009-02-27 15:48:23 +00:00 |
Florian Fainelli
|
b539d11497
|
move the device registration to an earlier initcall level, required for fallback SPROM to work
SVN-Revision: 14681
|
2009-02-27 15:18:34 +00:00 |
Florian Fainelli
|
730346e2d5
|
add support for user9102 boards (#4537)
SVN-Revision: 14305
|
2009-01-31 16:01:20 +00:00 |
Florian Fainelli
|
d7cb033a04
|
Add board definitions for the Davolink DV201AMR
SVN-Revision: 14263
|
2009-01-29 14:54:13 +00:00 |
Florian Fainelli
|
46b91ed787
|
frequency is in Hz, thanks Joel
SVN-Revision: 14067
|
2009-01-17 15:29:36 +00:00 |
Florian Fainelli
|
5905a48169
|
allow bcm6338 to get the base address of the memory controller register, required to detect memory size
SVN-Revision: 14047
|
2009-01-15 22:42:22 +00:00 |