15189a628a
firewall: allow incoming ICMPv6 router-advertisement and neighbor-advertisement, thanks swalker
...
SVN-Revision: 32127
2012-06-08 14:20:34 +00:00
075618c6e3
minor change: adjust formatting of firewall.config
...
- remove trailing whitespaces (s/\ $//g)
- replace spaces with tabs between options and values
SVN-Revision: 31427
2012-04-21 19:42:28 +00:00
9aaca7f1b1
firewall: allow ICMPv6 type 129 (echo reply) - this fixes basic ICMPv6 in case no connection tracking is used
...
SVN-Revision: 30727
2012-02-25 21:00:23 +00:00
77dda8d67a
firewall: - introduce per-section "option enabled" which defaults to "1" - useful to disable rules or zones without having to delete them - annotate default traffic rules with names - bump version
...
SVN-Revision: 29577
2011-12-20 01:10:15 +00:00
10f199d832
firewall: add DHCPv6 default rule ( #10381 )
...
SVN-Revision: 28874
2011-11-09 11:10:37 +00:00
f1e7045d30
firewall: further tune ICMPv6 default rules according to RFC4890 ( #9893 )
...
SVN-Revision: 27979
2011-08-14 00:33:29 +00:00
07abf4a81e
firewall: refine default ICMPv6 rules to better conform with RFC4890, do not forward link local ICMP message types, allow parameter problem
...
SVN-Revision: 27321
2011-06-30 12:22:05 +00:00
68a1c8e1e3
firewall: - allow multiple ports, protocols, macs, icmp types per rule - implement "limit" and "limit_burst" options for rules - implement "extra" option to rules and redirects for passing arbritary flags to iptables - implement negations for "src_port", "dest_port", "src_dport", "src_mac", "proto" and "icmp_type" options - allow wildcard (*) "src" and "dest" options in rules to allow specifying "any" source or destination - validate symbolic icmp-type names against the selected iptables binary - properly handle forwarded ICMPv6 traffic in the default configuration
...
SVN-Revision: 27317
2011-06-30 01:31:23 +00:00
f2b7c81d46
firewall: explictely mention network in default configuration, makes it less confusing
...
SVN-Revision: 26961
2011-05-20 13:45:40 +00:00
ad23dd94b6
firewall: provide examples of ssh port relocation on firewall and IPsec passthrough Two examples of potentially useful configurations (commented out, of course):
...
(a) map the ssh service running on the firewall to 22001 externally, without modifying the configuration of the daemon itself. this allows port 22 on the WAN side to then be port-forwarded to a
LAN-based machine if desired, or if not, simply obscures the port from external attack.
(b) allow IPsec/ESP and ISAKMP (UDP-based key exchange) to happen by default. useful for most modern VPN clients you might have on your WAN.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26805
2011-05-02 12:54:31 +00:00
cc84e0672b
firewall: don't apply default udp/68 rule to ip6tables
...
SVN-Revision: 21509
2010-05-19 21:37:12 +00:00
3875f85110
firewall: add commented disable_ipv6 option to default config
...
SVN-Revision: 21505
2010-05-19 09:49:21 +00:00
431808b5bf
allow ping
...
SVN-Revision: 20261
2010-03-18 03:46:41 +00:00
b3d3e5d752
firewall: fix MSS issue affection RELATED new connections ( closes : #5173 )
...
SVN-Revision: 17762
2009-09-27 13:57:09 +00:00
b44b066543
firewall: allow incoming udp/68 packets in the default configuration ( #4108 , #4781 )
...
SVN-Revision: 17238
2009-08-13 03:31:53 +00:00
97100e0248
firewall: enable /etc/firewall.user by default and install sample firewall.user file
...
SVN-Revision: 15221
2009-04-12 22:38:34 +00:00
50be634a3c
re-enable the mss fix by default for now - see discussion at http://lists.openwrt.org/pipermail/openwrt-devel/2009-January/003724.html for more information
...
SVN-Revision: 14293
2009-01-31 02:14:27 +00:00
359ce7f97e
disable the MSS fixup hack by default (most ISPs don't require this as a workaround for MTU problems, only some do). this should give a nice speedup for routing on standard-compliant ISPs
...
SVN-Revision: 13788
2008-12-31 19:02:03 +00:00
aaf31c36f1
set default input policy to ACCEPT to bring the firewall behavior closer to the one of previous versions
...
SVN-Revision: 12766
2008-09-28 16:17:49 +00:00
d7810ed63e
firewall changes: - implement a REJECT policy and enable it by default, reject packets with approriate response ( closes : #3970 ) - cleanup syn_flood and remove logging
...
SVN-Revision: 12688
2008-09-24 15:10:16 +00:00
aa6c019c11
use proto instead of protocol in uci firewall
...
SVN-Revision: 12391
2008-08-26 07:23:29 +00:00
5627667654
uci firewall - make uci firewall default and remove old code - fix up dependencies
...
SVN-Revision: 12284
2008-08-11 22:27:36 +00:00
Jo-Philipp Wich
Mirko Vogt
Travis Kemen
Nicolas Thill
Felix Fietkau
John Crispin