58ed4ded0e
hostapd: fix appending the iapp_interface variable to the config
...
Signed-off-by: Alexander Couzens <lynxis@c-base.org>
SVN-Revision: 24724
2010-12-19 11:56:49 +00:00
7ecd1c7484
hostapd: Add CONFIG_FULL_DYNAMIC_VLAN=y to hostapd-full.config
...
This allows hostapd to make use of the config option
"vlan_tagged_interface" to automatically create bridge and
VLAN interfaces in a fully dynamic way.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 24722
2010-12-19 11:48:38 +00:00
d08bc913a8
hostapd: Allow rsn_preauth configuration
...
Hostapd can allow preauthentication for WPA2-EAP networks when
the interfaces through which preauthentication is allowed are
configured.
Add a new param "rsn_preauth=0/1" to the configuration that enables
or disables preauthentication on the according bridge interface.
Preauthentication for unbridged networks is not considered in this
patch.
Cc: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 24721
2010-12-19 11:48:31 +00:00
87cba7eb46
hostapd: Add 'identity' config option when eap_type is 'tls' on wpa_supplicant ( #8164 )
...
SVN-Revision: 23817
2010-11-03 10:39:29 +00:00
0280ac8c92
Set auth_algs in hostapd.conf, make it configurable for WEP Always set auth_algs in hostapd.conf. For WEP, auth_algs is configurable by setting the encryption parameter of a wifi-iface to contain "open" (1, open system), "shared" (2, shared key), or "mixed" (3, permits both open system and shared key.) For example, use "wep+shared" for shared key authentication. The default is default is "open" as it is more secure than "shared" (although WEP is pretty weak regardless.) For non-WEP, "open" is always used.
...
https://dev.openwrt.org/ticket/8120
Signed-off-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 23655
2010-10-27 11:11:04 +00:00
35cdc5d722
hostapd/mac80211: implement support for AP+STA
...
SVN-Revision: 23602
2010-10-23 23:39:54 +00:00
1beef305cf
hostapd: Add support for 'iapp_interface' option, thanks stsp ( #7719 )
...
SVN-Revision: 22527
2010-08-08 10:46:24 +00:00
ca4a8b1bee
hostapd: add preliminary wps script support (push-button only, does not handle multi-bss yet)
...
SVN-Revision: 22100
2010-07-08 18:36:17 +00:00
4c0da9863a
hostapd: enable WPS for the full version of hostapd/wpa_supplicant/wpad
...
SVN-Revision: 22098
2010-07-08 18:36:07 +00:00
5f895af9fb
hostapd: enforce CCMP WPA cipher if hwmode is 11ng or 11na
...
SVN-Revision: 22000
2010-06-30 21:24:30 +00:00
f391ff4ec8
hostapd: allow *ccmp+tkip and *aes+tkip as well for cipher override
...
SVN-Revision: 21998
2010-06-30 21:03:56 +00:00
4289fa555e
hostapd: forgot the actual change in previous commit
...
SVN-Revision: 21821
2010-06-16 20:28:11 +00:00
db8b1922fc
hostapd: add ap isolate support for mac80211
...
SVN-Revision: 21179
2010-04-26 23:08:03 +00:00
38b256105d
hostapd: fixup madwifi turbo modes ( #7060 )
...
SVN-Revision: 20675
2010-04-03 15:16:33 +00:00
7a00430b3e
When enabling MFP, hostapd will read assoc_sa_query_max_timeout and assoc_sa_query_retry_timeout from it's config file. Make these options configurable in /etc/config/wireless. To make it clear that these options are 802.11w related, I named them ieee80211w_max_timeout and ieee80211w_retry_timeout instead.
...
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 20397
2010-03-24 00:23:10 +00:00
22b92b3e13
Enable management frame protection in hostapd, and make it configurable in /etc/config/wireless. Since ath9k is currently the only driver that supports MFP, it will only be enabled when ath9k is enabled.
...
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 20396
2010-03-24 00:22:19 +00:00
21f006f156
Enable management frame protection in wpa_supplicant, and make it configurable in /etc/config/wireless.
...
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 20395
2010-03-24 00:21:28 +00:00
e74fbc183b
Cleanup redundant psk handling code in wpa_supplicant.sh. (I sent this one to openwrt-devel before, but I am resending it as part of this series because the next patch will also edit wpa_supplicant.sh).
...
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 20394
2010-03-24 00:19:42 +00:00
90c566f557
hostapd: always strip "11" from hwmode value
...
SVN-Revision: 20363
2010-03-21 22:35:58 +00:00
ad1507756b
hostapd: remove the hotplug script for adding wds station interfaces to a bridge - it suffers from race conditions. instead let hostapd add the interfaces to the bridge
...
SVN-Revision: 20104
2010-03-09 21:16:38 +00:00
7fdbfef92f
wpa_supplicant: fix bridging settings for wds
...
SVN-Revision: 20088
2010-03-09 17:35:59 +00:00
31cfd93be4
hostapd: support creating WEP networks for mac80211 (patch by Stijn Tintel), fixes #6672
...
SVN-Revision: 19720
2010-02-19 01:34:44 +00:00
d692a2340c
mac80211: always use wpa_supplicant for client connections (patch by Stijn Tintel)
...
Since client mode in mac80211is unreliable without using wpa_supplicant,
it would be better to enable wpa_supplicant by default.
With this patch, wpa_supplicant will always be used for mac80211-based
drivers in client mode. This will break client mode for images that
don't include wpa_supplicant or wpad, so maybe I need to add a check
somewhere to see if wpa_supplicant is available, and show the user a
warning if he tries client mode without wpa_supplicant. Suggestions on
where to add this check are welcome.
Tested with ath5k in client mode on open and wpa2-psk network, and
tested on my ath9k based AP as well to make sure it doesn't break AP mode.
SVN-Revision: 19718
2010-02-19 01:07:21 +00:00
e1efddf19b
mac80211: use wpa_supplicant for unencrypted connections to improve client mode reliability (patch by Stijn Tintel from #6653 )
...
SVN-Revision: 19550
2010-02-08 13:42:14 +00:00
64268c7165
hostapd: add a build variant for wpa_supplicant and one for a multicall hostapd+supplicant program (wpad) and remove the old wpa_supplicant package
...
SVN-Revision: 19286
2010-01-23 08:28:26 +00:00
ba7bfddaae
mac80211: restructure /lib/wifi/mac80211.sh use the new multi-bss single instance hostapd mode move mac80211 specific bits out of /lib/wifi/hostapd.sh add a new option 'htmode' for switching between HT20 and HT40+,HT40-
...
SVN-Revision: 19235
2010-01-20 02:26:05 +00:00
b4ea1b0ac3
hostapd: parse the option for hiding the ESSID ( #6310 )
...
SVN-Revision: 18727
2009-12-09 19:10:54 +00:00
7e3d67e546
hostapd: replace the wme_* config variables with wmm_* ones ( fixes #6247 )
...
SVN-Revision: 18602
2009-11-29 14:13:47 +00:00
5501cf6ed8
hostapd: automatically add wds sta interfaces of an ap to the right bridge
...
SVN-Revision: 18365
2009-11-11 05:15:55 +00:00
36eccaad21
hostapd: implement wds ap support
...
SVN-Revision: 18364
2009-11-11 05:15:51 +00:00
a8ea28ad90
hostapd: update to latest git, remove openssl dependency for hostapd-full, it works with internal crypto now
...
SVN-Revision: 18360
2009-11-11 00:34:42 +00:00
8a89f203a0
hostapd: use the new build variants feature to clean up the makefile
...
SVN-Revision: 18358
2009-11-10 22:00:59 +00:00
875d957512
mac80211: fill some important capabilities into ht_capab in the hostapd config
...
SVN-Revision: 18293
2009-11-04 21:53:49 +00:00
6e9ada01c0
hostapd: do not configure wme when using madwifi - fixes wpa/wpa2 association problems
...
SVN-Revision: 18051
2009-10-17 04:55:59 +00:00
260d749684
hostapd: initialize wme to sane values
...
SVN-Revision: 17823
2009-10-02 18:55:03 +00:00
838c1d7cd0
add additions from ( #5149 )
...
SVN-Revision: 16841
2009-07-14 13:06:34 +00:00
94b56b6c6c
hostapd: Remove deprecated 'debug' configuration variable
...
SVN-Revision: 16594
2009-06-27 22:14:21 +00:00
e2f8f72041
hostapd only supports either b or g as hwmode configuration variable. If bg is set the scripts transfers it now to g mode.
...
SVN-Revision: 15182
2009-04-09 21:44:30 +00:00
ca749bea97
wifi: fix hostapd + autochannel
...
SVN-Revision: 15055
2009-03-27 21:14:59 +00:00
1d970c0035
bump to version 0.6.9. Synced default.config and mini.config with upstream version.
...
SVN-Revision: 14992
2009-03-23 16:16:22 +00:00
782ca84485
hostapd: add 11n mode and ht_capab option for hostapd
...
SVN-Revision: 14713
2009-03-01 18:02:49 +00:00
b29544b2c3
add country code option for hostapd (patch from #4675 )
...
SVN-Revision: 14608
2009-02-22 02:46:04 +00:00
408690fb74
fix hostapd startup for no-crypto configurations
...
SVN-Revision: 14276
2009-01-30 02:52:14 +00:00
fe48f4cac0
hostapd: upgrade to 0.6.7 and conditionally enable 11n support (currently depends on ath9k)
...
SVN-Revision: 14224
2009-01-27 20:05:11 +00:00
aa59a08b45
hostapd,wpa_supplicant: create control interfaces for hostapd_cli and wpa_cli
...
SVN-Revision: 14039
2009-01-15 07:50:11 +00:00
35078a6a52
hostapd,madwifi: rename agmode option to hwmode. 11a and 11g aren't the only allowed values
...
SVN-Revision: 13790
2008-12-31 19:09:26 +00:00
e050667baa
fix typo
...
SVN-Revision: 13084
2008-10-30 22:49:15 +00:00
a4f11ca22e
use pidfiles for hostapd/wpa_supplicant instead of killing all processes when bringing an interface down - fixes an issue with random hostapd death
...
SVN-Revision: 13078
2008-10-29 17:26:49 +00:00
9161a70235
fix hostapd a/g mode if only the channel is configured in the config
...
SVN-Revision: 13076
2008-10-29 15:52:58 +00:00
69692e019a
parse the a/g mode setting in /etc/config/wireless when setting up hostapd (instead of hardcoding it to g)
...
SVN-Revision: 12673
2008-09-23 18:18:21 +00:00
Felix Fietkau
Vasilis Tsiligiannis
Jo-Philipp Wich
Travis Kemen
Florian Fainelli
Hauke Mehrtens
Gabor Juhos
Andy Boyett