0641728fa2
bcm53xx: drop fixed clock from DTS for Buffalo WXR-1900DHP
...
We don't use fixed clock in 4.4 (and 4.3) anymore.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47705
2015-12-03 08:36:34 +00:00
2766887751
bcm53xx: update linux 4.4 config
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47704
2015-12-03 08:19:30 +00:00
d90561c929
bcm53xx: add linux 4.4 support
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47703
2015-12-03 08:19:25 +00:00
e395433178
brcm63xx: add linux 4.4 support
...
Only netboot tested. Flash at your own risk.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47702
2015-12-02 22:24:46 +00:00
621677154f
kernel: add linux 4.4 support
...
Based on 4.4-rc3. Runtime tested on MIPS.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47701
2015-12-02 22:23:22 +00:00
d12502b666
brcm63xx: Add NuCom R5010UNv2 support
...
This patch adds support for the NuCom R5010UNv2.
It's a BCM6328 based board. It has an onboard BCM43217 wifi chip. For this
wifi chip looks like the brcmsmac driver isn't still supported, b43 drivers are used
for the profile of the router.
It's worth mentioning this board was affected by a bug solved with
https://dev.openwrt.org/changeset/46707
Tested-by: Angel Fontan <angel.fontan@gmail.com>
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47697
2015-12-02 22:18:20 +00:00
9d7e058a23
brcm63xx: drop 3.18 support
...
Drop 3.18 support; it will live on in CC.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47696
2015-12-02 22:16:37 +00:00
e9390dcf23
ipq806x: ap148/r7500: fix eth0 for non gige speeds
...
Eth0 is attached to mac0 of the switch with a fixed link and and not to
phy4 in single phy mode, so configuring it to anything but 1000FD will
break the connection, which will happen if a only 100 Mbit capapble device
is plugged into the wan port.
Fix this by not taking the state from phy4 and just configuring a fixed link
for eth0.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47695
2015-12-02 22:16:23 +00:00
f0a5f24217
kernel: update 4.1 to 4.1.13
...
- two upstreamed patches removed
- compile tested all targets using 4.1
- run tested ar71xx
Signed-off-by: Roman Yeryomin <roman@advem.lv>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47694
2015-12-02 21:52:41 +00:00
c4ea02cc69
bcm53xx: switch to ucidef_add_switch_ports()
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47692
2015-12-02 18:51:12 +00:00
e2999a8e5f
mpc85xx: fix up m25p80 device id ( #21286 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47691
2015-12-02 17:35:37 +00:00
46112609d0
lantiq: fix up m25p80 device ids ( #20975 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47690
2015-12-02 17:20:39 +00:00
f17be5617a
bcm53xx: update PCIe driver
...
This updates the iProc PCIe driver to the version currently submitted
for kernel 4.5.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47688
2015-12-02 15:24:53 +00:00
0e73da37d5
bcm53xx: update SMP patches
...
Broadcom submitted new SMP patches for this SoC to upstream Linux, add
them to OpenWrt.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47687
2015-12-02 15:23:08 +00:00
c03f264f6d
bcm53xx: activate workarounds for erratas
...
This also deactivates some workaround for erratas only seen in older
CPU cores and L2 cores not used in this SoC.
This partly reverts commit r44947.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47686
2015-12-02 15:19:29 +00:00
1d1c9d56dd
bcm53xx: move patch 132-ARM-BCM5301X-Add-missing-Netgear-R8000-LEDs.patch
...
This patch is currently placed directly behind the SMP patches and has
nothing to do with SMP, move it to an other position.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47685
2015-12-02 15:14:58 +00:00
db7f2d9531
brcm47xx: add Netgear WN2500RP support
...
We generate V1 image only for now. We lack buttons support for V2.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47682
2015-12-02 09:24:52 +00:00
0c250ad4cc
mpc85xx: fix typo added in r47676
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47681
2015-12-01 09:22:53 +00:00
c977dfbec3
mpc85xx: record board id and model name in /etc/board.json
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47680
2015-11-30 12:49:19 +00:00
b4531995c8
mpc85xx: convert to ucidef_add_switch_ports()
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47676
2015-11-30 11:09:29 +00:00
fff1a82180
mvebu: switch network and led config defaults to board detection framework
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47674
2015-11-30 10:43:31 +00:00
81f603dfb8
ar71xx: record board id and model name in /etc/board.json
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47672
2015-11-30 10:17:20 +00:00
06af966094
ramips: remove duplicate patch
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47670
2015-11-28 23:26:03 +00:00
82557aee85
ramips: adapt VoCore to new second spi device code
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47667
2015-11-28 23:24:52 +00:00
af14fa011c
ramips: add second SPI clocks
...
These clocks were missing in the changes introduced in r47573-47580
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47666
2015-11-28 23:24:40 +00:00
3ced1d6bb7
kernel: add fix for missing include in spi-nor.h ( #20973 )
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47665
2015-11-26 17:13:05 +00:00
b44a27885f
kernel: revert a faulty upstream commit that was added with the spi-nor/m25p80 backport ( fixes #20971 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47664
2015-11-26 16:40:11 +00:00
963fc89df2
ar71xx: switch network and led defaults to board detection framework
...
Also translate ucidef_add_switch_vlan() to ucidef_add_switch_ports() for better
switch topology mapping and improved default config generation.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47663
2015-11-26 14:42:28 +00:00
ecf5b4fab7
ramips: hg255d: replace ucidef_set_led_interface() with ucidef_set_led_netdev()
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47657
2015-11-26 12:46:04 +00:00
055ee48ab0
bcm53xx: update bcm53xxspiflash to match spi-nor backported from 4.4-rc1
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47653
2015-11-26 11:43:16 +00:00
3fac6dde85
Revert "ar71xx: migrate led and network setup to board detection framework"
...
The board detect code needs more fixes in order to work properly.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47641
2015-11-25 11:53:59 +00:00
7b4acdeff6
ralink: renable nand support
...
CONFIG_MTK_MTD_NAND was incorrectly disabled by r47619.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47640
2015-11-24 22:00:55 +00:00
34e0d3cb5a
lantiq: fix compile error
...
This fixes a problem introduced in r47624.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47628
2015-11-24 20:12:21 +00:00
d8a62fdbc2
ramips: fix typo in image makefile ( #18712 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47627
2015-11-24 19:29:56 +00:00
c3fc2a7a35
kernel: disable software protection bits for macronix flash chips at init
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47626
2015-11-24 19:09:56 +00:00
bb1c915f1e
kernel: update m25p80 in 4.1 to the latest version from 4.4-rc1
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47624
2015-11-24 18:59:28 +00:00
1a092ce0e0
ar71xx: add GL-Domino Pi support V3
...
This is the patch for GL-Domino Pi V3. Updated against the latest trunk.
Signed-off-by: alzhao<alzhao@gmail.com>
SVN-Revision: 47622
2015-11-24 18:30:50 +00:00
a04c3e73a3
ar71xx: add GL-AR300 support V3
...
This is the patch for GL-AR300 V3, tested against the latest trunk.
Signed-off-by: alzhao<alzhao@gmail.com>
SVN-Revision: 47621
2015-11-24 18:30:19 +00:00
72093bd528
ar71xx: add GL-AR150 support V3
...
This is the 3rd version. Modified against the latest trunk.
Signed-off-by: alzhao<alzhao@gmail.com>
SVN-Revision: 47620
2015-11-24 18:29:59 +00:00
8c1f5141ce
ralink: add support for netis WF-2881
...
netis WF-2881 is an MT7621AT based router with MT7602EN, MT7612EN.
It has 128MB DDR3, 128MB SLC NAND FLASH, 5-port Gbps switch and 1x USB 3.0.
The following patch adds support for this device.
this device only works on top of UBI.
Tested and working:
* ethernet
* both WiFi radios
* USB 3.0
* buttons (reset button)
* ethernet switch and USB diag LEDs
* UART
* GPIOs
* sysupgrade
Tested and not working
* failsafe
Signed-off-by: YounJae Rho <luxflow@live.com>
SVN-Revision: 47619
2015-11-24 18:29:26 +00:00
4223e47c19
oxnas: set irq of usb&sata to cpu1
...
V2:
The KD-20 also has USB 3.0.I modiy the set_irq_affinity usb 2 to set_irq_affinity ?hci_hcd 2 to bind usb 2.0&3.0 to cpu1.
Signed-off-by: Shonn Lu <countrysideboy@qq.com>
SVN-Revision: 47618
2015-11-24 18:29:14 +00:00
e9baf8265b
ramips: add support for Youku YK1
...
Changes since V1:
I resend this patch for current trunk.The former V1 patch is for CC branch.
Signed-off-by: Shonn Lu <countrysideboy@qq.com>
SVN-Revision: 47617
2015-11-24 18:29:02 +00:00
12b6f4cf71
ramips: add second spi master sysclk
...
for mt7620, rt3883 and rt5350
Signed-off-by: Michael Lee <igvtee@gmail.com>
SVN-Revision: 47616
2015-11-24 18:28:54 +00:00
8ef96b3e6f
ar71xx: Build initramfs by default for Mikrotik devices
...
Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
SVN-Revision: 47612
2015-11-24 18:28:05 +00:00
c7bcdac82e
brcm2708: fix multi-device image generation
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47610
2015-11-24 18:27:43 +00:00
c52d6d4f45
ipq806x: another fix to the stmmac DMA configuration to fix remaining data corruption issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47603
2015-11-22 21:59:22 +00:00
fc64fd8712
Revert "mvebu: migrate led and network setup to board detection framework"
...
Roll back the mvebu conversion to board detection code as we need to fix
some strcutural issues first.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47597
2015-11-22 20:52:10 +00:00
7fc4a4581b
ar71xx: fix network default config of the TEW-732BR
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47595
2015-11-22 20:00:13 +00:00
a32f301b62
ipq806x: fix a nasty stmmac data corruption bug caused by faulty DMA initialization
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47594
2015-11-22 19:07:00 +00:00
3789b1f5a0
ipq806x: update stmmac to the version from linux 4.3
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47593
2015-11-22 19:06:51 +00:00
Rafał Miłecki
Jonas Gorski
Hauke Mehrtens
Jo-Philipp Wich
Felix Fietkau
John Crispin