Commit Graph

28688 Commits (063074cf0ced47cfd741681e5ab0fc2ea31f93ed)

Author SHA1 Message Date
Felix Fietkau 063074cf0c mac80211_hwsim: select 802.11n support for hostapd
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42766
2014-10-05 11:50:42 +00:00
Felix Fietkau 62e6e788dd relayd: update to the latest version, fixes a build error with the new gcc (#18010)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42765
2014-10-05 11:01:49 +00:00
Felix Fietkau 281f40cef2 hostapd: allow using iapp for any encryption type (fixes #18022)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42764
2014-10-05 10:55:55 +00:00
Felix Fietkau cd80931e03 hostapd: merge an upstream patch for pmksa cache
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42762
2014-10-05 10:26:26 +00:00
Felix Fietkau b5529ed26b iwinfo: detect AC PHY for broadcom-wl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42761
2014-10-05 10:26:17 +00:00
Felix Fietkau dac05f6724 iwinfo: detect HT PHY for broadcom-wl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42760
2014-10-05 10:26:10 +00:00
Felix Fietkau 349b20c197 iwinfo: fix handling of accessing nl80211 interfaces via radio*
look up device path via uci instead of assuming a direct phy index

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42759
2014-10-05 10:26:05 +00:00
Felix Fietkau 0e439d8a2a iwinfo: enable nl80211 support based on cfg80211, not mac80211
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42758
2014-10-05 10:25:55 +00:00
Jo-Philipp Wich 3158e7cca2 iwinfo: handle 802.11ac mode for lua
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>

SVN-Revision: 42757
2014-10-04 09:38:17 +00:00
Jonas Gorski 14ebb012a4 brcm63xx: fix wrong fixups pointer
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42756
2014-10-03 11:03:58 +00:00
Steven Barth 8a971b2770 base-files: remove a 'not found' error message during system boot
During boot, a not found message is displayed for systems which do
not have uci 'network.globals.ula_prefix' defined in
/etc/config/network. The error message itself is not used and can
be ignored.

Signed-off-by: Michel Stam <m.stam@fugro.nl>

SVN-Revision: 42755
2014-10-03 10:56:43 +00:00
Rafał Miłecki 7436b17075 bcm53xx: build R6250 firmware with "Other Regions" region
This prevents vendor firmware from warning about incompatible region.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42754
2014-10-03 10:40:12 +00:00
Felix Fietkau 156b296b20 ar8216: set the pvid based on runtime state instead of port number to fix learning with enable_vlan = 0
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42753
2014-10-02 20:00:41 +00:00
Steven Barth 64e3cb9fe8 toolchain: Fix libthreaddb not being installed
Signed-off-by: Michel Stam <m.stam@fugro.nl>

SVN-Revision: 42752
2014-10-02 19:47:39 +00:00
Steven Barth 3cdeac4173 busybox: remove validation message from bootup
A message:
uinteger - 9 = true
is displayed during boot. This is the result of the validate_data
command checking the cron log level. As the output is not
interesting, only the result, filter...

Signed-off-by: Michel Stam <m.stam@fugro.nl>

SVN-Revision: 42751
2014-10-02 19:47:33 +00:00
Steven Barth e15f03e5de authsae: update to latest version
Send a netlink call to leave the mesh when meshd exits
Make hunting-and-pecking loop (more) resistant to side channel attack

Signed-off-by: Michel Stam <m.stam@fugro.nl>

SVN-Revision: 42750
2014-10-02 19:47:28 +00:00
Steven Barth 75572d0d31 6in4: Tos support
Tos support is added as a string parameter which can have the following values :
   -inherit (outer header inherits the tos value of the inner header)
   -hex value

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

SVN-Revision: 42749
2014-10-02 19:38:15 +00:00
Steven Barth e7e54ef672 6to4: Tos support
Tos support is added as a string parameter which can have the following values :
   -inherit (outer header inherits the tos value of the inner header)
   -hex value

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

SVN-Revision: 42748
2014-10-02 19:38:04 +00:00
Steven Barth e9d15da0da 6rd: Tos support
Tos support is added as a string parameter which can have the following values :
     -inherit (outer header inherits the tos value of the inner header)
     -hex value

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

SVN-Revision: 42747
2014-10-02 19:37:58 +00:00
Steven Barth 36b05bbed3 IPIP: IP in IP package support
The package supports IP in IP by registering the ipip protocol handler

Following options are configurable
    -peeraddr (IPv4 remote address)
    -ipaddr (IPv4 local address)
    -ttl (time to live of encapsulating packet)
    -tos (type of service of encapsulating packet either inherit (outer header inherits the value of the inner header) or hex value)
    -df (don't fragment flag of encapsulating packet)
    -mtu (IPIP tunnel mtu)
    -tunlink (bind tunnel to this interface)
    -zone (firewall zone to which the IPIP tunnel will be added)

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

SVN-Revision: 42746
2014-10-02 19:37:36 +00:00
Steven Barth 73179a188c netifd: fix an error message during network shutdown
When 'wifi down' is called by /etc/init.d/network, it is run from
stop_service( ). This function is in turn invoked from stop( ).
stop( ) messes up the order by first procd_kill-ing the network
settings, then calling wifi to down the wifi networking
interfaces. By redefining stop( ) instead, the proper order is
restored.

Signed-off-by: Michel Stam <m.stam@fugro.nl>

SVN-Revision: 42745
2014-10-02 19:37:25 +00:00
Steven Barth 1c166058df netifd: add IPIP tunnel support (thx Hans Dedecker)
SVN-Revision: 42744
2014-10-02 19:37:17 +00:00
Rafał Miłecki 66922082ed bcm53xx: early support for Netgear R6300 V2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42743
2014-10-02 19:30:08 +00:00
Steven Barth def69a96e9 map: fix portsets starting with 0 and use regular NAT for 1:1 MAP
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 42741
2014-10-02 19:15:38 +00:00
Jonas Gorski 2fa8a656a6 brcm63xx: update spw500v sprom to values from gpl tarball
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42740
2014-10-02 12:26:36 +00:00
Jonas Gorski 60cb45427e brcm63xx: reorder some patches according to their upstream state
The irq rewrite was accepted upstream.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42739
2014-10-02 12:26:19 +00:00
Jonas Gorski 57214b00ae brcm63xx: Add DT support for 96368MVWG
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42738
2014-10-02 12:26:07 +00:00
Jonas Gorski 477826ef31 brcm63xx: Add DT support for 96368MVNgr
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42737
2014-10-02 12:25:57 +00:00
Jonas Gorski cdea47cbc3 brcm63xx: Add DT support for 96358VW2
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42736
2014-10-02 12:25:41 +00:00
Jonas Gorski 80db30b508 brcm63xx: Add DT support for 96358VW
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42735
2014-10-02 12:25:36 +00:00
Jonas Gorski e7ade47fba brcm63xx: Add DT support for 96338W
Renamed of_board_id to convention.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42734
2014-10-02 12:25:27 +00:00
Jonas Gorski d9194da882 brcm63xx: Add DT support for 96338GW
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42733
2014-10-02 12:25:22 +00:00
Jonas Gorski 73f576dff2 brcm63xx: Add DT support for 96348R
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42732
2014-10-02 12:25:13 +00:00
Jonas Gorski 35cf1adfc6 brcm63xx: Add DT support for 96348GW-11
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42731
2014-10-02 12:25:07 +00:00
Jonas Gorski eaee4e3eb7 brcm63xx: Add DT support for 96348GW-10
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42730
2014-10-02 12:25:01 +00:00
Jonas Gorski 73d59ed675 brcm63xx: Add DT support for 96348GW
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42729
2014-10-02 12:24:39 +00:00
Jonas Gorski 99ecfbf702 brcm63xx: Add DT support for 96345GW2
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42728
2014-10-02 12:24:34 +00:00
Jonas Gorski a950e2fce8 brcm63xx: Add DT support for 963281TAN
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42727
2014-10-02 12:24:29 +00:00
Jonas Gorski ddcc29290c brcm63xx: fix brcm63xx fallback typo
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42726
2014-10-02 12:24:14 +00:00
Jonas Gorski 9a24294b02 brcm-wl: use new brcm63xx fallback sprom
This fixes brcm63xx fallback sprom extraction.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42725
2014-10-02 12:24:05 +00:00
Felix Fietkau f9fb48c6bc uqmi: set data format to 802.3 at startup
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42724
2014-10-02 12:19:37 +00:00
Felix Fietkau bf4cab37b7 uqmi: do not wait for network connection before starting dhcp
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42723
2014-10-02 12:19:26 +00:00
Felix Fietkau 179bfca038 uqmi: update to the latest version
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42722
2014-10-02 12:19:09 +00:00
Felix Fietkau 4955a2cd10 uqmi: use the autoconnect feature
Instead of connecting once and saving the packet data handle, let the
firmware handle connecting/reconnecting automatically. This is more
reliable and reduces reliance on potentially stale data.

Use the global packet data handle to attempt to disable autoconnect
before restarting the connection. This ensures that the firmware will
take the new APN/auth settings.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42721
2014-10-02 12:18:58 +00:00
Felix Fietkau b54144a4c7 uqmi: replace logger calls in netifd with echo
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42720
2014-10-02 12:18:43 +00:00
Felix Fietkau cf595fe834 uqmi: work out the ifname instead of relying on it being in uci
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42719
2014-10-02 12:18:28 +00:00
Rafał Miłecki 28301ea0b1 bcm53xx: early buttons support (without interrupts)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42718
2014-10-02 12:05:58 +00:00
Rafał Miłecki bd12c49473 bcm53xx: backport bcma RFC patch that fixes LEDs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42717
2014-10-02 10:42:30 +00:00
Rafał Miłecki 01ab343779 bcm53xx: support devices with more (13+) partitions
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42716
2014-10-02 09:51:54 +00:00
Rafał Miłecki bbae0f7df0 bcm53xx: select LEDs support by default
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42715
2014-10-02 05:54:18 +00:00