Commit Graph

135 Commits (02f815d1907cdd7e042415a2b4a749c819087168)

Author SHA1 Message Date
John Crispin 9c409cb4e2 kernel: add missing softdog symbol
Signed-off-by: John Crispin <john@phrozen.org>
2018-05-27 09:26:13 +02:00
Sandeep Sheriker Mallikarjun 441c26da6a kernel: fix build error for external kernel.
fixed build error when external kernel is selected from menuconfig.
The patches present in target/linux/generic does not gets applied
to external kernel and build fails while compiling mac82011 &
regmap-core kernel modules. as a fix added check in Makefile for
CONFIG_EXTERNAL_KERNEL_TREE present or not.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2018-05-07 10:31:35 +02:00
Zoltan HERPAI 5360441d8f modules: gpio-mcp23s08: fully depend on i2c-core
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2018-02-20 14:13:20 +01:00
Daniel Gimpelevich 49d3c5f057 kernel: add IEEE-1284 parallel port support
The kmod-lp package included both lp.ko and ppdev.ko, but ECP device
drivers may or may not require lp NOT to be loaded, needing only ppdev.
Additionally, There were no packages for any parport interface modules,
such as uss720 or parport_pc, provided here. It has not been otherwise
possible to use PC-style parport hardware for kmod-lp.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
2018-02-12 15:21:43 +01:00
Hans Dedecker f65591f113 kernel: add test MTD driver package
Allows to test MTD driver using RAM

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-01-29 21:12:46 +01:00
Tim Harvey a5199379c0 kernel/modules/other: disable Nokia BT UART
disable the Nokia BT UART present on Nikia N9, N900 & N950 added in 4.12.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2018-01-27 16:46:44 +01:00
Jo-Philipp Wich eaf79d06b7 Revert "kernel: add IEEE-1284 parallel port support"
This reverts commit 666e9cf222.

The change has not been build-tested on non-x86 targets and leads to
stalled kernel builds due to unset configuration symbols there.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-01-22 13:41:20 +01:00
Daniel Gimpelevich 666e9cf222 kernel: add IEEE-1284 parallel port support
The kmod-lp package included both lp.ko and ppdev.ko, but ECP device
drivers may or may not require lp NOT to be loaded, needing only ppdev.
Additionally, There were no packages for any parport interface modules,
such as uss720 or parport_pc, provided here. It has not been otherwise
possible to use PC-style parport hardware for kmod-lp.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
2018-01-22 07:17:11 +01:00
Jo-Philipp Wich 34e9937f2a kernel: fix packaging of kmod-gpio-nxp-74hc164
The NXP 74HC164 GPIO expander driver uses a different config symbol
("CONFIG_GPIO_74X164") and module name since since at least Kernel
version 2.6.37.

Update the kmod package definition accordingly by adjusting kconfig
and module file names.

This unrelated, but correct change has been separated from the
WNR2000v5 support commits.

Ref: https://github.com/lede-project/source/pull/1256
Suggested-by: Raphael Catolino <raphael.catolino@gmail.com>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-01-07 12:33:47 +01:00
Hauke Mehrtens e387d9b0ca kernel: kmod-rtc-ds1307: add dependency to regmap
In kernel 4.14 kmod-rtc-ds1307 depends on regmap-i2c, add this missing
dependency.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-12-16 22:15:08 +01:00
Hauke Mehrtens 36f83dbc41 kernel: kmod-zram: deactivate CONFIG_ZRAM_WRITEBACK for kernel 4.14
This new option was introduced in kernel 4.14 and should be deactivated
by default.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-12-16 22:14:54 +01:00
Hauke Mehrtens 5c9cc1e73b kernel: kmod-mmc: handle moved mmc_block.ko
mmc_block.ko was moved with kernel 4.10.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-12-16 22:14:20 +01:00
Hauke Mehrtens 199273324e kernel: add kmod-crypto-ecdh
In kernel 4.14 kmod-bluetooth depends on kmod-crypto-ecdh, add
kmod-crypto-ecdh to LEDE.
Both packages also depend on the kmod-crypto-kpp package. To build this
we have to fix the dependency of CRYPTO_ECDH which has a typo.
This patch is already accepted upstream.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-12-16 22:13:04 +01:00
Martin Schiller 7ffeecd6ac kernel: add it87-wdt watchdog timer module
The module parameters "nogameport=1" and "nocir=1" are needed,
because this is not supported on recent chips and doesn't
really tell if the system is stable.

As this features will already be removed in linux-4.13 or newer,
this module parameters can be removed in the future.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2017-11-22 20:49:04 +01:00
Jianhui Zhao a8a23ca50c kernel: add packaging for mtdoops
Signed-off-by: Jianhui Zhao <jianhuizhao329@gmail.com>
2017-11-15 21:13:16 +01:00
Stijn Tintel 19a7f44a5a kernel: move IIO modules to iio.mk
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-10-23 12:50:30 +03:00
Daniel Engberg 692aa82981 kernel: kmod-btmrvl: Add kmod-mmc as dependency
This fixes the build of this module and should fix the build bots.

Fixes: a5922f6 ("kernel: bluetooth: add marvell sdio bluetooth module")
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
[removed mveub dependency and update commit comment]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-17 10:42:07 +02:00
Henryk Heisig a5922f6c46 kernel: bluetooth: add marvell sdio bluetooth module
This commit add support for Marvell bluetooth with SDIO interface.

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
[Fix KCONFIG and FILES option]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-17 00:59:55 +02:00
Philip Prindeville 344fde35e3 kernel: add packaging for Xeon iTCO watchdog timer
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2017-09-17 00:08:00 +02:00
Daniel Golle aef39358e6 kernel: properly package 8250 serial PCI module
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-06-03 20:45:50 +02:00
Felix Fietkau 5afe9a054c kernel: allow selecting RTC drivers on targets without explicit RTC support
Keep them disabled by default to avoid pulling in extra kernel bloat

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-05-02 14:33:58 +02:00
Jonas Gorski ac388ad83a kernel: make kmod-mmc unavailable on UML
MMC requires IOMEM support, which UML doesn't have.

Fixes mac80211 build, as mwifiex-sdio depends on MMC support.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-04-10 11:23:51 +02:00
Philip Prindeville 513dff3cca kernel: add w83627hf-wdt watchdog timer module
This is a 3rd party chipset which is not present on all Intel
reference designs, so make it a module rather than baked in (this
will also alleviate conflicts with drivers which also detect some
of the same chipsets).

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2017-03-29 08:21:09 +02:00
Ian Pozella 7c9c9fdd87 kernel: tpm: add Infineon i2c support
(based on openwrt "kernel: add tpm support")

Signed-off-by: Ian Pozella <Ian.Pozella@imgtec.com>
2017-03-13 14:20:47 +01:00
Jo-Philipp Wich a92d977904 kernel: fix kmod-tpm-tis packaging
The tmp-tis module depends on tpm_tis_core.ko, so package this file as well.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-03-03 18:14:36 +01:00
Chris Blake 3fcc4b656a kernel: Add TPM Module support
The following will enable the TPM kernel module, as well as support for
the atmel i2c TPM driver. Tested and confirmed working on an Aerohive
AP-121

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-02-27 11:39:23 +01:00
Felix Fietkau 9f7fc2376d kernel: mark nvmem as hidden, it is only used as a library for other modules
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-27 16:54:30 +01:00
Felix Fietkau 9ed108e98b kernel: update kmod-* packaging and dependencies for linux 4.9
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-27 11:18:27 +01:00
Felix Fietkau 28af0f2fbd kernel: make kmod package dependencies forward compatible
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-27 11:18:27 +01:00
Felix Fietkau 96815fe0a2 kernel: remove omap24xx specific kernel module packages
If the target is ever restored, those drivers should be built into the
kernel instead.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 13:44:26 +01:00
Felix Fietkau 7ff7be96dd omap: build various core drivers into the kernel instead of packaging them
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 13:44:26 +01:00
Felix Fietkau 0b2b162db9 kernel: remove kmod-gianfar, it is already built into the kernel
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 13:44:24 +01:00
Felix Fietkau 7f0796d874 imx6: remove kmod-thermal-imx, it is already enabled in the kernel config
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau c524d1b256 imx6: enable the Freescale SNVS RTC driver in the kernel config instead of packaging it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau 0d5ba94088 orion: enable SoC drivers in the kernel config
Clean up packaged modules

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-24 09:40:46 +01:00
Felix Fietkau 9a1f441ac8 kirkwood: enable SoC drivers in the kernel config
Clean up packaged modules

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-24 09:40:46 +01:00
Jo-Philipp Wich 3494ca66c5 linux: do not autoload sdhci.ko as sdhci-pltfm.ko already depends on it
Currently, installing kmod-sdhci fails with "sdhci is already loaded" since
"sdhci.ko" is inserted explicitely first, the implicitely loaded again when
"sdhci-pltfm.ko" is inserted as the latter depends on the former.

Remove the explicit autoprobe of "sdhci.ko" to fix the postinstall script.

Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-14 18:41:21 +01:00
Alberto Bursi 1e15d92de1 kernel: add a missing submenu
this kernel module currently does not set submenu.
Fix this by adding it to the "Others" submenu

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2016-12-14 11:05:41 +01:00
Florian Fainelli 5763e438f6 kernel: add kernel package for the rs5c372a rtc module
This RTC is used on the Buffalo Terastation Pro II/Live devices.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-12-04 11:41:51 +01:00
Florian Larysch dfc14bd145 kernel: add kernel module package for the DS1374 RTC
Package the driver for the DS1374 chip present on the T4240RDB.

Signed-off-by: Florian Larysch <fl@n621.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [fix missing symbol]
2016-11-08 10:49:40 +01:00
Felix Fietkau 46f2ca9a8f kernel: move kmod-owl-loader to the right .mk file
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-10-04 16:01:42 +02:00
Felix Fietkau 31e0f0aec0 kernel: do not enable the unpackaged rfkill-gpio driver
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-29 18:25:49 +02:00
John Crispin 986ec56507 rfkill: add fake rfkill support
allow building of modules depending on RFKILL even if RFKILL is not enabled.

Signed-off-by: John Crispin <john@phrozen.org>
2016-09-27 20:27:26 +02:00
Felix Fietkau 175237e7df kernel: fix broken dependency of kmod-owl-loader on kmod-ath9k
It messes up the build order of package/kernel/linux vs
package/kernel/mac80211

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-22 20:09:20 +02:00
Christian Lamparter e9401a2335 kernel: owl-loader for delayed Atheros ath9k fixup
Some devices (like the Cisco Meraki Z1 Cloud Managed Teleworker Gateway)
need to be able to initialize the PCIe wifi device. Normally, this is done
during the early stages of booting linux, because the necessary init code
is read from the memory mapped SPI and passed to pci_enable_ath9k_fixup.
However,this isn't possible for devices which have the init code for the
Atheros chip stored on NAND in an UBI volume. Hence, this module can be
used to initialze the chip when the user-space is ready to extract the
init code.

Martin Blumenstingl made a few fixes and added support for lantiq:
kernel: owl-loader: add support for OWL emulation PCI devices
kernel: owl-loader: don't re-scan the bus when ath9k_pci_fixup failed
kernel: owl-loader: use dev_* instead of pr_* logging functions
kernel: owl-loader: auto-generate the eeprom filename as fallback
kernel: owl-loader: add a debug message when swapping the eeprom data
kernel: owl-loader: add missing newlines in log messages
kernel: owl-loader: add support for the lantiq platform

These patches have been integrated. Thanks!

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
2016-09-19 19:32:35 +02:00
Christian Lamparter 39f3408732 ppc4xx: remove booke-wdt watchdog package
This patch gets rid of the booke watchdog kmod package.
Instead the affected boards will enable it in their
kernel configs.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-22 09:48:12 +02:00
Zoltan HERPAI df2889c709 packages: fix bmp085-spi typo
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2016-07-05 13:36:36 +02:00
Stephen Walker 66b67b743f kernel: other.mk: add pps-ldisc support
The pps-ldisc kernel module supports Pulse-Per-Second connected with the CD (Carrier Detect) pin.

Signed-off-by: Stephen Walker <stephendwalker+github@gmail.com>
2016-06-30 22:48:39 +02:00
Alexander Couzens 19aae09f5f kmod-bmp085: add dependency on !LINUX_3_18 !LINUX_4_1
93d5629a introduced a build failure on older platforms (<4.4)
because bmp085 is a boolean and not a tristate.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2016-06-29 02:46:48 +02:00
Dirk Neukirchen 93d5629a27 modules: add BMP085 pressure sensor
add BMP085 and BMP180 pressure sensors
this driver supports the SPI and I2C and
older chips (BMP280 is supported by iio subsystem)

issue found when cleaning up omap/config

found while writing this patch that a
similar patch was submitted in June/July 2014 but not integrated

only compile tested

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
2016-06-29 00:42:19 +02:00