Commit Graph

42674 Commits (00f1dc55e86ed755f70e15f65ccb8d85994ba74c)

Author SHA1 Message Date
Rosy Song 2dc1f54b12 iptables: fix dependency for libip6tc on IPV6
Signed-off-by: Rosy Song <rosysong@rosinson.com>
2018-09-26 22:40:37 +02:00
Martin Schiller e86cdf85a7 uboot-lantiq: fix compatibility with gcc7
Backport u-boot commit 704f3acfcf55343043bbed01c5fb0a0094a68e8a to fix
compatibility with gcc7.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2018-09-26 20:35:07 +02:00
INAGAKI Hiroshi 81f7bdcb8d ath79: add support for Buffalo BHR-4GRV
Buffalo BHR-4GRV is a wired router, based on Atheros AR7242.

Specification:

- Atheros AR7242
- 64 MB of RAM
- 32 MB of Flash
  - 2x 16 MB SPI-NOR flash
- 5x 10/100/1000 Mbps Ethernet
- 3x LEDs, 2x keys
- 1x USB 2.0 Type-A
- UART header on PCB
  - JP1: Vcc, GND, TX, RX from reset button side

Flash instruction using factory image:

1. Boot the BHR-4GRV normaly and connect the computer to its LAN port
2. Access to
"http://192.168.11.1/cgi-bin/cgi?req=frm&frm=py-db/firmup.html"
with user "bufpy" and password "otdpopy"
3. Select the OpenWrt factory image and click "OK" button to perform
firmware upgrade
4. Wait ~200 seconds to complete flashing

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2018-09-26 20:35:07 +02:00
INAGAKI Hiroshi 1df1ea4d7e ath79: fix support for Buffalo WZR-HP-G450H and split to dts/dtsi
There are many parts that are incorrect or missing in the current
code for Buffalo WZR-HP-G450H in ath79, so its support is broken.

I fixed that issues and split to dts/dtsi files to add support for
Buffalo BHR-4GRV.

And WZR-450HP has the same hardware as WZR-HP-G450H, so I change the
device name to "WZR-HP-G450H/WZR-450HP".

Specification:

- Atheros AR7242
- 64 MB of RAM
- 32 MB of Flash
  - 2x 16 MB SPI-NOR flash
- 3T3R 2.4 GHz wifi
  - SoC internal
- 5x 10/100/1000 Mbps Ethernet
- 6x LEDs, 5x keys
- 1x USB 2.0 Type-A
- UART header on PCB
  - JP1: Vcc, GND, TX, RX from reset button side

Flash instruction using factory image:

1. Boot the WZR-HP-G450H (or WZR-450HP) normaly and connect the computer
to its LAN port
2. Access to
"http://192.168.11.1/cgi-bin/cgi?req=frm&frm=py-db/firmup.html"
with user "bufpy" and password "otdpopy"
3. Select the OpenWrt factory image and click "OK" button to perform
firmware update
4. Wait ~200 seconds to complete flashing

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2018-09-26 20:35:07 +02:00
INAGAKI Hiroshi b6e6785c88 ath79: fix wrong pll-data value for I-O DATA WN-AC-DGR devices
The pll-data value "0x56000000" is wrong for I-O DATA WN-AC1600DGR2
and WN-AC1167DGR, so there was a problem of slowing down the speed of
ethernet.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2018-09-26 20:35:07 +02:00
Steffen Förster 8480907e70 ramips: fix Archer C20 sysupgrade
The sysupgrade image failed the check due to the wrong string in the
supported devices. This patch provides the correct name by dropping the
SUPPORTED_DEVICES to use the default generated name.

Signed-off-by: Steffen Förster <steffen@chemnitz.freifunk.net>
[drop the SUPPORTED_DEVICES, the old name was never used in a release]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-09-26 20:35:07 +02:00
Emil Muratov 8e6bc1a5be ramips: fix power LED DTB for wt3020
Since c134210 power LED is no longer lights after boot-up.
Reversing gpio polarity makes it work as it should be.

Signed-off-by: Emil Muratov <gpm@hotplug.ru>
2018-09-26 20:35:07 +02:00
Joseph C. Lehner d6e39e7466 ramips: ex2700: actually remove kmod-mt76*
When building using the multiple devices option with per-device root
filesystem, only the meta package mt76 is omitted but not the
dependencies selected by the package.

Explicitly exclude all 3 mt76 packages, plus the metapackage.
Otherwise, these modules will be included in the build, wasting
a few hundred kilobytes.

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
[mention the root cause of the issue in the commit message]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-09-26 20:35:07 +02:00
Hauke Mehrtens c662299bf9 ath10k-ct: update to version ath10k-4.16
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-09-26 16:39:45 +02:00
Hauke Mehrtens 02e7fa6f8a iw: update nl80211.h
Now this file matches the version in backports.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-09-26 16:39:44 +02:00
Hauke Mehrtens 4fcbad1aa0 mac80211: fix compile warning in 986-rt2x00-add-TX-LOFT-calibration.patch
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-09-26 16:39:44 +02:00
Hauke Mehrtens ec684ce193 mac80211: Add patches which were added later
These patches were added after the new matches structure for the
mac80211 package was created. All the deleted patches are already
integrated in kernel 4.19-rc4.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-09-26 16:39:44 +02:00
Hauke Mehrtens db90c243a0 mac80211: update to version based on 4.19-rc4
This updates mac80211 to backports based on kernel 4.19-rc4.

I plan to integrate all the patches which are in this tar into upstream
backports soon.

I used the backports generated from this code:
https://github.com/hauke/backports/commits/wip2

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-09-26 16:39:44 +02:00
John Crispin 61b5b4971e mac80211: make ath10k-ct the default ath10k
We select ath10k-ct by default, but it is still possible to build
the upstream version.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John Crispin <john@phrozen.org>
2018-09-26 16:39:44 +02:00
Daniel Golle de1c58a64b mac80211: rt2x00: add experimental patches from Stanislaw Gruszka
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-09-26 16:39:44 +02:00
Daniel Golle c837c41a76 mac80211: rt2x00: remove obsolete patch
According to Stanislaw Gruszka the patch
    600-23-rt2x00-rt2800mmio-add-a-workaround-for-spurious-TX_F.patch
should be dropped.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-09-26 16:39:44 +02:00
Tomislav Požega d449233fd2 mac80211: rt2x00: add TX LOFT calibration
Add TX LOFT calibration from mtk driver.

Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
2018-09-26 16:39:44 +02:00
Tomislav Požega 5d1620f29c mac80211: rt2x00: add RXIQ calibration
Add RXIQ calibration found in mtk driver. With old openwrt builds this gets us ~8Mbps more of RX bandwidth (test with iPA/eLNA layout).
Please try if this makes any difference among various board/RF layouts.

Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
2018-09-26 16:39:43 +02:00
Tomislav Požega e125b6abb2 mac80211: rt2x00: add RXDCOC calibration
Add RXDCOC calibration code from mtk driver. Please try if this makes any difference among various board/RF layouts.

Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
2018-09-26 16:39:43 +02:00
Tomislav Požega 061541f207 mac80211: rt2x00: add r calibration
Add r calibration code as found in mtk driver.

Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
2018-09-26 16:39:43 +02:00
Tomislav Požega 66929e3414 mac80211: rt2x00: add RF self TXDC calibration
Add TX self calibration based on mtk driver.

Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
2018-09-26 16:39:43 +02:00
Tomislav Požega 6044682b83 mac80211: rt2x00: write registers required for reducing power consumption
Write registers required for reducing power consumption like the vendor
driver does when ADJUST_POWER_CONSUMPTION_SUPPORT is set.
This helps devices to sync at better TX/RX rates and improves overall
performance.

Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[daniel@makrotopia.org: edited commit message]
2018-09-26 16:39:39 +02:00
Daniel Golle b88df4a7c8 linux-firmware: set PKG_MIRROR_HASH
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-09-26 16:35:33 +02:00
John Crispin 0a1faecdb5 linux-firmware: add ath10k support
Signed-off-by: John Crispin <john@phrozen.org>
2018-09-26 16:35:33 +02:00
John Crispin 9860cdda76 ath10k-firmware: disable the package and use default linux-firmware package
Signed-off-by: John Crispin <john@phrozen.org>
2018-09-26 16:35:33 +02:00
John Crispin d9eefa7a70 mac80211: rebase ontop of v4.18.5
Signed-off-by: John Crispin <john@phrozen.org>
2018-09-26 16:35:33 +02:00
Koen Vandeputte e9d92bf1e1 kernel: bump 4.14 to 4.14.72
Refreshed all patches.

Removed upstreamed:
- 203-MIPS-ath79-fix-restart.patch
- 0013-MIPS-ath79-fix-system-restart.patch
- 180-earlycon-initialize-port-uartclk-based-on-clock-frequency-property.patch
- 181-earlycon-remove-hardcoded-port-uartclk-initialization-in-of_setup_earlycon. patch
- 700-1-6-e1000e-Remove-Other-from-EIAC.patch
- 700-2-6-Partial-revert-e1000e-Avoid-receiver-overrun-interrupt-bursts.patch
- 700-3-6-e1000e-Fix-queue-interrupt-re-raising-in-Other-interrupt.patch
- 700-4-6-e1000e-Avoid-missed-interrupts-following-ICR-read.patch

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-09-26 15:54:18 +02:00
Koen Vandeputte 3caf940cc6 kernel: bump 4.9 to 4.9.129
Refreshed all patches.

Removed upstreamed:
- 203-MIPS-ath79-fix-restart.patch

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-09-26 15:54:18 +02:00
Koen Vandeputte 17e90d88e2 kernel: bump 3.18 to 3.18.123
Refreshed all patches.

Compile-tested on: adm5120
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-09-26 15:54:18 +02:00
Rosy Song a6add47869 netifd: do not validate relevant section when ipv6 is not supported
Signed-off-by: Rosy Song <rosysong@rosinson.com>
2018-09-25 22:35:38 +02:00
Florian Eckert 61a5994900 base-files: add network_get_metric() to /lib/functions/network.sh
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
2018-09-25 10:16:03 +02:00
Mauro Mozzarelli 9f105ce8c8 kernel: netfilter: add IPVS kernel module support
IPVS (IP Virtual Server) implements transport-layer load balancing inside
the Linux kernel, so called Layer-4 switching. IPVS running on a host acts
as a load balancer at the front of a cluster of real servers, it can direct
requests for TCP/UDP based services to the real servers, and makes services
of the real servers to appear as a virtual service on a single IP address.

This change adds the following kmod packages
- kmod-nf-ipvs
- kmod-nf-ipvs-ftp
- kmod-nf-ipvs-sip

Signed-off-by: Mauro Mozzarelli <mauro@ezplanet.org>
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2018-09-24 21:44:37 +01:00
Andy Walsh e0196152eb ncurses: use default host install
* just use default host/install, so libs/headers get properly generated/installed

Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
2018-09-24 19:22:53 +02:00
Andy Walsh 2bbc9376c6 gettext-full: host compile with -fpic
Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
2018-09-24 19:18:52 +02:00
Samuel Casa 65e9561b3d zram-swap: Shell cosmetic
Signed-off-by: Samuel Casa <samuel.casa@neratec.com>
2018-09-24 19:08:59 +02:00
Samuel Casa b291517fdf zram-swap: remove trailing whitespaces in init script
Signed-off-by: Samuel Casa <samuel.casa@neratec.com>
[slightly reword subject]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-09-24 19:08:59 +02:00
David Yang aaf46a8fe2 dante: disable sched_getscheduler() - not implemented in musl
musl doesn't come with an valid implementation of `sched_getscheduler()`;
it simply returns -ENOSYS for it. Without this option (and compile dante
with `sched_getscheduler()` enabled), you will get

    error: serverinit(): sched_getscheduler(2): failed to retrieve current
    cpuscheduling policy: Function not implemented

and dante won't start at all.

Ref: http://lists.alpinelinux.org/alpine-devel/3932.html
Ref: http://lists.alpinelinux.org/alpine-devel/3936.html
Signed-off-by: David Yang <mmyangfl@gmail.com>
[slightly reword commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-09-24 19:04:47 +02:00
Tony Ambardar 4097ab6a97 base-files: fix postinstall uci-defaults removal
Commit 7f694582 introduced a bug where default_postinst() often fails to
remove a uci-defaults script after application, leaving it to run again
after a reboot.
(Note: commit 7f694582 also introduced FS#1021, now fixed by 73c745f6)

The subtle problem arises from the shell logical chain:
[ -f "$i" ] && . "$i" && rm -f "$i"

Most uci-defaults scripts contain a terminal 'exit 0' statement which,
when sourced, results in the logic chain exiting before executing 'rm -f'.
This was observed while testing upgrades of 'luci-app-sqm'.

The solution is to wrap the shell sourcing in a subshell relative to the
command 'rm -f':
( [ -f "$i" ] && . "$i" ) && rm -f "$i"

Revert to using 'grep' to prefilter the list of entries from the control
file, which yields the full path of uci-defaults scripts. This allows
keeping the existence check, directory change and script sourcing inside
the subshell, with the script removal correctly outside.

This approach avoids adding a second subshell only around the "." (source)
command. The change also preserves the fix FS#1021, since the full path is
used to source the script, which is POSIX-portable irrespective of PATH
variable or reference to the CWD.

Run Tested on: LEDE 17.01.4 running ar71xx, while tracing installation of
package luci-app-sqm with its associated /etc/uci-defaults/luci-sqm file.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2018-09-24 18:58:00 +02:00
Konstantin Demin d3b43f49ac rules.mk: add ESED command
ESED is SED with extended regular expressions turned on.
Command line and usage are the same as for SED.

Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
2018-09-24 15:57:27 +01:00
Rafał Miłecki 43d36606d6 kernel: pick earlycon regression fixes from the stable-queue.git
This fixes regression introduced in kernel 4.14 and makes bcm53xx revert
obsolete.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-09-24 13:47:06 +02:00
Felix Fietkau dee8804de0 build: drop buildbot toolchain rebuild check when not using git
The check cleans and rebuilds the toolchain if it changed on update.
When building from a source tarball, it is reasonable to expect that
there will be no updates, so no rebuild check is necessary

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-24 11:03:20 +02:00
Jo-Philipp Wich 4f277eb640 lldpd: inhibit linking of libbsd on !GLIBC
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-09-24 08:36:10 +02:00
Rosy Song 9f0cb135dd busybox: fix dependency for IPV6
Signed-off-by: Rosy Song <rosysong@rosinson.com>
2018-09-23 17:45:08 +02:00
Hauke Mehrtens efffba3409 kernel: fix build of nftables
Backport an additional patch from 4.16 for nftables.
This fixes a build problem recently introduced.

Fixes: f57806b56e ("kernel: generic: Fix nftables inet table breakage")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-09-22 23:59:10 +02:00
Yangbo Lu 87d7a596ec layerscape: build ls-dpl package with linux dtc tool
Building ls-dpl package requires the dtc tool. This patch
is to support using linux dtc tool for ls-dpl package.
This avoids compile issue when host system doesn't have
the dtc tool.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-09-22 21:20:58 +02:00
Yangbo Lu db30adc931 layerscape: fix get_device_file() function of restool
The restool failed to work with current gcc-7.3.0-musl.
This patch is to add a restool fix-up patch to fix
multiple problems encountered in the get_device_file()
function:
 - The deprecated atoi() function is replaced by strtoul
 - An invalid memory access was being performed by using
 memory from dir->d_name even after closedir(). This is
 fixed by a strdup() on the device filename.
 - Also, error prints now print any relevant error code.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-09-22 21:20:58 +02:00
Yangbo Lu 0f44c7c8d1 layerscape: update README for SD card boot and new devices
This patch is to update the README since SD card boot support
and LS1012AFRWY/LS1021ATWR were introduced.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-09-22 21:20:57 +02:00
Yangbo Lu 7016dd48f1 layerscape: add ls1012afrwy support and drop ls1012afrdm
ls1012afrdm was no longer supported in NXP Layerscape SDK.
Instead a new board ls1012afrwy was introduced in LSDK.
This patch is to drop ls1012afrdm and add ls1012afrwy support.
Since only 2MB NOR flash could be used, we just put u-boot
and firmware on NOR flash, and put kernel/dtb/rootfs on SD
card.

The Layerscape FRWY-LS1012A board is an ultra-low-cost
development platform for LS1012A Series Communication
Processors built on Arm Cortex-A53. This tool refines the
FRDM-LS1012A with more features for a better hands-on experience
for IoT, edge computing, and various advanced embedded
applications. Features include easy access to processor I/O,
low-power operation, micro SD card storage, an M2 connector, a
small form factor, and expansion board options via mikroBUS Click
Module. The MicroBUS Module provides easy expansion via hundreds
of powerful modules supporting sensors, actuators, memories,
and displays.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-09-22 21:20:57 +02:00
Yangbo Lu eb684205e5 layerscape: add SD card boot support
NOR/QSPI Flash on Layerscape board only has limited 64MB memory size.
Since some boards (ls1043ardb/ls1046ardb/ls1088ardb/ls1021atwr)
could support SD card boot, we added SD boot support for them to put
all things on SD card to meet large memory requirement.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-09-22 21:20:57 +02:00
Yangbo Lu f0ec7bd27d layerscape: add armv7 subtarget and ls1021atwr board support
The NXP TWR-LS1021A module is a development system based
on the QorIQ LS1021A processor.
- This feature-rich, high-performance processor module can
  be used standalone or as part of an assembled Tower System
  development platform.
- Incorporating dual Arm Cortex-A7 cores running up to 1 GHz,
  the TWR-LS1021A delivers an outstanding level of performance.
- The TWR-LS1021A offers HDMI, SATA3 and USB3 connectors as
  well as a complete Linux software developer's package.
- The module provides a comprehensive level of security that
  includes support for secure boot, Trust Architecture and
  tamper detection in both standby and active power modes,
  safeguarding the device from manufacture to deployment.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-09-22 21:20:57 +02:00