Commit Graph

724 Commits (00f1dc55e86ed755f70e15f65ccb8d85994ba74c)

Author SHA1 Message Date
Sven Eckelmann 78a5d25dca ar71xx: Skip more hashed blocks for OM2P(-HS) 64k variant
The OM2P(-HS)v4 got a variant which uses a slightly different flash. The
standard versions used a flash with 256KB blocks which is no longer
available. The replacement flash uses a flash with 64K blocks.

The padding for the image rootfs is already for 64K and 256K and thus can
be flashed on the device without any problems. Unfortunately, the
bootloader will check $rootfs_size (rounded down to the nearest 64k block)
minus 1x 64k. But it is now possible that the new JFFS2 rootfs_data starts
even earlier and modifies the checked region. The check will then fail and
the backup image (when available) will be booted.

Just setting it to the same number of skipped blocks as other 64K models
avoids this problem.

Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
2018-09-10 10:01:58 +02:00
Yousong Zhou 9e58c20ec9 scripts/ipkg-build: quash error messages when conffiles.resolved is empty
When Package/xx/conffiles only contains directories that are empty at
package time, conffiles.resolved will be missing and the following
error messages will appear in the build log.

	/home/yousong/git-repo/openwrt/openwrt/scripts/ipkg-build -c -o 0 -g 0 /home/yousong/git-repo/openwrt/openwrt/build_dir/target-mips_24kc_musl/linux-malta_be/openvswitch-2.10.0/ipkg-mips_24kc/openvswitch-common /home/yousong/git-repo/openwrt/openwrt/bin/packages/mips_24kc/packages
	mv: cannot stat 'CONTROL/conffiles.resolved': No such file or directory
	chmod: cannot access 'CONTROL/conffiles': No such file or directory

It will not break the ipkg-build process.  The change is merely cosmetic
to not cause confusion when reading logs

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2018-09-09 01:21:01 +00:00
Yousong Zhou 204081670b scripts/metadata.pm: avoid adding dup names in provides list
The need arises from building Open vSwitch kernel datapath modules, e.g.

 - kmod-openvswitch from Linux upstream
 - kmod-openvswitch-intree from openvswitch source code

where both provides virtual package "kmod-openvswitch" for userspace
packages to select and depend on

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2018-09-09 01:21:01 +00:00
Felix Fietkau 00f030a9c6 build: add support for enabling the rootfs/boot partition size option via target feature
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-03 12:06:24 +02:00
Jo-Philipp Wich 5ebcd32997 scripts: bundle-libraries: fix logic flaw
Previous refactoring of the script moved the LDSO detection into a
file-not-exists condition, causing onyl the very first executable to
get bundled.

Solve the problem by unconditionally checking for LDSO again.

Fixes: 9030a78a71 ("scripts: bundle-libraries: prevent loading host locales")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-08-29 14:19:43 +02:00
David Bauer 8e9a59a6b9 build: add mkrasimage
The current make-ras.sh image generation script for the ZyXEL NBG6617
has portability issues with bash. Because of this, factory images are
currently not built correctly by the OpenWRT buildbots.

This commit replaces the make-ras.sh by C-written mkrasimage.

The new mkrasimage is also compatible with other ZyXEL devices using
the ras image-format.
This is not tested with the NBG6616 but it correctly builds the
header for ZyXEL factory image.

Signed-off-by: David Bauer <mail@david-bauer.net>
2018-08-28 11:26:53 +02:00
Jo-Philipp Wich 9030a78a71 scripts: bundle-libraries: prevent loading host locales (FS#1803)
Binary patch the bundled glibc library to inhibit loading of host locale
archives in order to avoid triggering internal libc assertions when
invoking shipped, bundled executables.

The problem has been solved with upstream Glibc commit
0062ace229 ("Gracefully handle incompatible locale data") but we still
need to deal with older Glibc binaries for some time to come.

Fixes FS#1803
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-08-27 12:51:07 +02:00
Jo-Philipp Wich a692e4e3de scripts: time.pl: avoid hard Time::HiRes dependency
Use Time::HiRes when available and fallback to raw syscall interface
when not. If that fails too, simply report 0, 0 as real time.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-08-05 12:24:01 +02:00
Jo-Philipp Wich d3ddf6631e build: remove GNU time dependency
Replace the GNU time program invocation with a simple Perl script reporting
the timing values. Since we require Perl anyway for the build system, we can
as well use that instead of requiring a random GNU utility rarely installed
by default.

Fixes: ff6e62b288 ("build: log time taken by each packages/steps")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-08-05 00:06:27 +02:00
Paul Schulz 7bbd1855cd config: Change conf.c remove compiler warnings
Compiler is producing the warning:
   warning: format not a string literal and no format arguments
   [-Wformat-security]

This patch makes the format a literal string in printf statements.

This with: gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3) in Ubuntu 18.04

Signed-off-by: Paul Schulz <paul@mawsonlakes.org>
2018-07-30 10:43:36 +02:00
Yousong Zhou ac10975cd7 scripts/dl_github_archive.py: stringify exception
Closes openwrt/openwrt#1163

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2018-07-17 17:27:01 +00:00
Matthias Schiffer 16035a7dd3
include/feeds.mk: rework generation of opkg distfeeds.conf
Allow enabling/commenting/disabling each feed individually by using a
tristate config symbol.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-07-12 21:18:41 +02:00
Matthias Schiffer 6bdd5d8459
scripts/feeds: add src-dummy method
The src-dummy method does not actually obtain any feed, but it can be used
to insert addtional entries into the opkg distfeeds.conf. This is useful to
make package feeds available to users without requiring the corresponding
source feeds to be available during build.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-07-12 21:16:40 +02:00
Yousong Zhou 04b9f85873 scripts/dl_github_archive.py: rename from download.py
- Make the code more GitHub-specific
 - Requires mirror hash to work with .gitattributes
 - Use different API depending on whether PKG_SOURCE_VERSION is a
   complete commit id or other ref types like tags
 - Fix removing symbolic link
 - pre-clean dir_untar for possible leftovers from previous run

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2018-07-05 01:30:57 +08:00
Yousong Zhou eb6759cc78 fixup-makefile.pl: fixup when PKG_SOURCE is defined elsewhere
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2018-07-05 01:30:57 +08:00
Felix Fietkau 29b2199eb0 build: fix target metadata scan dependencies
Move SCAN_DEPS to scan.mk to eliminate redundancy with scripts/feeds
Add image/*.mk to SCAN_DEPS for targets to pick up newly added devices

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-02 14:27:06 +02:00
Yousong Zhou 6e3c2d757a scripts/download.py: use a more terse api for fetching git commit date
The previous api [1] includes in its response patch data among other
things, as such the response size can vary and be big.  Use another
api[2] to improve it a bit

 [1] Get a single commit, Repositories, https://developer.github.com/v3/repos/commits/#get-a-single-commit
 [2] Git Commits, Git Data, https://developer.github.com/v3/git/commits/#get-a-commit

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2018-06-27 15:32:01 +08:00
Yousong Zhou 75ab064d2b build: download code from github using archive API
A new python script scripts/download.py is added to fetch tarballs using
GitHub archive API [1], then repack in a reproducible way same as the
current DownloadMethod/git

GitHub imposes a 60 reqs/hour rate limit on unauthenticated API
access[2].  This affects fetching commit date for feeding tar --mtime=
argument.  However, observation indicates that archive download is NOT
subject to this limit at the moment.  In the rare cases where download
fails because of this, we will falback to using DownloadMethod/git

The missing piece in the GitHub API is that it cannot provide in the
tarball dependent submodules's source code.  In that case, the
implementation will also fallback to using DownloadMethod/git

 [1] Get archive link, https://developer.github.com/v3/repos/contents/#get-archive-link
 [2] Rate limiting, https://developer.github.com/v3/#rate-limiting

v2 <- v1:

 - allow passing multiple urls with --urls argument
 - add commit ts cache.  can be helpful on retry

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2018-06-27 10:51:27 +08:00
Christian Lamparter 82618062cf ipq40xx: add support for the ZyXEL NBG6617
This patch adds support for ZyXEL NBG6617

Hardware highlights:

SOC:    IPQ4018 / QCA Dakota
CPU:    Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7
DRAM:   256 MiB DDR3L-1600/1866 Nanya NT5CC128M16IP-DI @ 537 MHz
NOR:    32 MiB Macronix MX25L25635F
ETH:    Qualcomm Atheros QCA8075 Gigabit Switch (4 x LAN, 1 x WAN)
USB:    1 x 3.0 (via Synopsys DesignWare DWC3 controller in the SoC)
WLAN1:  Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2
WLAN2:  Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2
INPUT:  RESET Button, WIFI/Rfkill Togglebutton, WPS Button
LEDS:   Power, WAN, LAN 1-4, WLAN 2.4GHz, WLAN 5GHz, USB, WPS

Serial:
	WARNING: The serial port needs a TTL/RS-232 3.3v level converter!
	The Serial setting is 115200-8-N-1. The 1x4 .1" header comes
	pre-soldered. Pinout:
	  1. 3v3 (Label printed on the PCB), 2. RX, 3. GND, 4. TX

first install / debricking / restore stock:
 0. Have a PC running a tftp-server @ 192.168.1.99/24
 1. connect the PC to any LAN-Ports
 2. put the openwrt...-factory.bin (or V1.00(ABCT.X).bin for stock) file
    into the tftp-server root directory and rename it to just "ras.bin".
 3. power-cycle the router and hold down the the WPS button (for 30sek)
 4. Wait (for a long time - the serial console provides some progress
    reports. The u-boot says it best: "Please be patient".
 5. Once the power LED starts to flashes slowly and the USB + WPS LEDs
    flashes fast at the same time. You have to reboot the device and
    it should then come right up.

Installation via Web-UI:
 0. Connect a PC to the powered-on router. It will assign your PC a
    IP-address via DHCP
 1. Access the Web-UI at 192.168.1.1 (Default Passwort: 1234)
 2. Go to the "Expert Mode"
 3. Under "Maintenance", select "Firmware-Upgrade"
 4. Upload the OpenWRT factory image
 5. Wait for the Device to finish.
    It will reboot into OpenWRT without any additional actions needed.

To open the ZyXEL NBG6617:
 0. remove the four rubber feet glued on the backside
 1. remove the four philips screws and pry open the top cover
    (by applying force between the plastic top housing from the
    backside/lan-port side)

Access the real u-boot shell:
ZyXEL uses a proprietary loader/shell on top of u-boot: "ZyXEL zloader v2.02"
When the device is starting up, the user can enter the the loader shell
by simply pressing a key within the 3 seconds once the following string
appears on the serial console:

|   Hit any key to stop autoboot:  3

The user is then dropped to a locked shell.

|NBG6617> HELP
|ATEN    x[,y]     set BootExtension Debug Flag (y=password)
|ATSE    x         show the seed of password generator
|ATSH              dump manufacturer related data in ROM
|ATRT    [x,y,z,u] RAM read/write test (x=level, y=start addr, z=end addr, u=iterations)
|ATGO              boot up whole system
|ATUR    x         upgrade RAS image (filename)
|NBG6617>

In order to escape/unlock a password challenge has to be passed.
Note: the value is dynamic! you have to calculate your own!

First use ATSE $MODELNAME (MODELNAME is the hostname in u-boot env)
to get the challange value/seed.

|NBG6617> ATSE NBG6617
|012345678901

This seed/value can be converted to the password with the help of this
bash script (Thanks to http://www.adslayuda.com/Zyxel650-9.html authors):

- tool.sh -
ror32() {
  echo $(( ($1 >> $2) | (($1 << (32 - $2) & (2**32-1)) ) ))
}
v="0x$1"
a="0x${v:2:6}"
b=$(( $a + 0x10F0A563))
c=$(( 0x${v:12:14} & 7 ))
p=$(( $(ror32 $b $c) ^ $a ))
printf "ATEN 1,%X\n" $p
- end of tool.sh -

|# bash ./tool.sh 012345678901
|
|ATEN 1,879C711

copy and paste the result into the shell to unlock zloader.

|NBG6617> ATEN 1,0046B0017430

If the entered code was correct the shell will change to
use the ATGU command to enter the real u-boot shell.

|NBG6617> ATGU
|NBG6617#

Co-authored-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: David Bauer <mail@david-bauer.net>
2018-06-26 08:57:26 +02:00
Ted Hess 7590c3c58f scripts: Replace obsolete POSIX tmpnam in slugimage.pl with File::Temp function
Signed-off-by: Ted Hess <thess@kitschensync.net>
2018-06-05 10:07:42 -04:00
Philip Prindeville e495a05069 env: only use color diffs on terminals
When sending script/env diff's output to a file or pipeline, you
don't want escape characters for ANSI color sequences fouling the
byte stream.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2018-05-05 09:44:43 +02:00
Rosen Penev 1ce846580a download.pl: Change OpenWrt mirrors to HTTPS.
These have supported HTTPS for quite a while. I have not seen any obvious breakage.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-05-01 11:12:15 +02:00
Rosen Penev 9ea90209f9 download.pl: Change SourceForge address to HTTPS.
SourceForge has supported HTTPS for its downloads for a long time now.

I have not been able to see any failures resulting from this change.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-05-01 11:12:15 +02:00
Felix Fietkau 41ab276fe4 scripts/feeds: add support for git feeds with submodules
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-04-27 15:19:19 +02:00
Jo-Philipp Wich 746c590882 scripts: bundle-libraries: fix build on OS X (FS#1493)
This allegedly fixes compilation of the library bundler preload library on
Apple OS X. The resulting executables have not been runtime tested due to a
lack of suitable test hardware.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-04-26 16:06:55 +02:00
Sven Eckelmann 0b20490207 ipq40xx: add support for OpenMesh A62
* QCA IPQ4019
* 256 MB of RAM
* 32 MB of SPI NOR flash (s25fl256s1)
  - 2x 15 MB available; but one of the 15 MB regions is the recovery image
* 2T2R 2.4 GHz
  - QCA4019 hw1.0 (SoC)
  - requires special BDF in QCA4019/hw1.0/board-2.bin with
    bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=OM-A62
* 2T2R 5 GHz (channel 36-64)
  - QCA9888 hw2.0 (PCI)
  - requires special BDF in QCA9888/hw2.0/board-2.bin
    bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62
* 2T2R 5 GHz (channel 100-165)
  - QCA4019 hw1.0 (SoC)
  - requires special BDF in QCA4019/hw1.0/board-2.bin with
    bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=OM-A62
* multi-color LED (controlled via red/green/blue GPIOs)
* 1x button (reset; kmod-input-gpio-keys compatible)
* external watchdog
  - triggered GPIO
* 1x USB (xHCI)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x gigabit ethernet
  - phy@mdio3:
    + Label: Ethernet 1
    + gmac0 (ethaddr) in original firmware
    + 802.3at POE+
  - phy@mdio4:
    + Label: Ethernet 2
    + gmac1 (eth1addr) in original firmware
    + 18-24V passive POE (mode B)
* powered only via POE

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the factory image to the u-boot when the device boots up.

The initramfs image can be started using

  setenv bootargs 'loglevel=8 earlycon=msm_serial_dm,0x78af000 console=ttyMSM0,115200 mtdparts=spi0.0:256k(0:SBL1),128k(0:MIBIB),384k(0:QSEE),64k(0:CDT),64k(0:DDRPARAMS),64k(0:APPSBLENV),512k(0:APPSBL),64k(0:ART),64k(0:custom),64k(0:KEYS),15552k(inactive),15552k(inactive2)'
  tftpboot 0x84000000 openwrt-ipq40xx-openmesh_a62-initramfs-fit-uImage.itb
  set fdt_high 0x85000000
  bootm 0x84000000

Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
2018-04-23 22:07:22 +02:00
Valentin Spreckels 7a303fe5d1 scripts: add EVA ramboot script
Use the EVA bootloader to load a small linux system into the ram and boot
it from there:

  ./scripts/flashing/eva_ramboot.py 192.168.178.1 path/to/initramfs-kernel.bin

Signed-off-by: Valentin Spreckels <Valentin.Spreckels@Informatik.Uni-Oldenburg.DE>
Acked-by: John Crispin <john@phrozen.org>
[reworded commit message]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-03-18 22:22:38 +01:00
Sven Eckelmann 1b773a46c2 build: Allow to change the FIT config section name
Some devices only boot when a special config is found in the image and
completely ignore the default entry during the selection. These devices can
now use the variable DEVICE_DTS_CONFIG in their device image definition.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2018-03-17 08:09:04 +01:00
Matthias Schiffer 884c9575e1
scripts/metadata.pm: allow group-only Require-User specs
/lib/functions.sh can deal with Require-User specifications that only
contain a group, but no user. Adjust metadata.pm to allow such
specifications as well.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-02-26 07:19:46 +01:00
Alif M. Ahmad 02a1a8af95 build: cleanup leftover qconf files
``make xconfig`` toplevel target will invoke ``make qconf`` inside
./scripts/config directory, which results a ``qconf`` executable.

This commit removes leftover ``qconf`` executable during ``make
config-clean``.

Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
2018-02-13 11:35:35 +01:00
Jo-Philipp Wich a9a43f3d79 build: bundle-libraries.sh: patch bundled ld.so
Remove references to /etc/, /lib/ and /usr/ from the bundled ld.so
interpreter using simple binary patching.

This is needed to prevent loading host system libraries such as
libnss_compat.so.2 on foreign systems, which may result in ld.so
inconsistency assertions.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-02-02 13:59:34 +01:00
Yousong Zhou aa66aa0c9a scripts/qemustart: more portable array operation
The following commands output 1,2,1,1

    cmd0='a=("${a[@]}" 'a'); echo "${#a}"'
    cmd1='a+=('a'); echo "${#a}"'
    bash -c "$cmd0"; zsh -c "$cmd0"
    bash -c "$cmd1"; zsh -c "$cmd1"

The following outputs 0,1,0,0

    cmd2='f() { echo "$#"; }; f "${a[@]}"'
    cmd3="a=(); $cmd2"
    bash -c "$cmd2"; zsh -c "$cmd2"
    bash -c "$cmd3"; zsh -c "$cmd3"

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2018-01-31 16:54:57 +08:00
Jo-Philipp Wich a405a93fa6 metadata: do not emit broken kconfig dependency statements
Prevent emitting broken dependency statements when resolving references
to non existing packages to an empty provider list.

Fixes: 47d6b05ad3 ("metadata: always resolve dependencies through provides list")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-01-14 19:00:06 +01:00
Matthias Schiffer 06d51dbb9e
scripts/feeds: fix install of packages with different source/binary names
The logic for choice between source and binary packages was reversed.

Fixes: 52719c2b67 "metadata: scripts/feeds: distinguish between source
and binary packages, resolve virtual dependencies"
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-14 17:07:58 +01:00
Matthias Schiffer de0ccd3532
metadata: improve code readability by using (s)printf instead of string interpolation
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:45 +01:00
Matthias Schiffer 4bb54ed15e
build: remove obsolete "package feature" feature
Package "features" seem to be unused for some time. In any case, custom
Config.in snippets and package PROVIDES are a much more flexible way to
express similar options.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:45 +01:00
Matthias Schiffer 52719c2b67
metadata: scripts/feeds: distinguish between source and binary packages, resolve virtual dependencies
Properly resolve build depends to source packages and runtime depends to
binary packages. Dependencies on virtual packages are resolved to the first
provider now.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:45 +01:00
Matthias Schiffer 47d6b05ad3
metadata: always resolve dependencies through provides list
Instead of adding virtual packages to the normal package list, keep a
separate list for provides, make each package provide itself, and resolve
all dependencies through this list. This allows to use PROVIDES to replace
existing packages.

Fixes FS#837.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:44 +01:00
Matthias Schiffer 565de8b8a8
metadata: simplify generation of build depends from runtime depends
Runtime depends cannot have a buildtype suffix, and they never refer to
source package names. In addition, this adds warnings about unsatisfiable
dependencies.

Furthermore, this change fixes the generation of conditional build
dependencies for virtual packages provided by different source packages.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:44 +01:00
Matthias Schiffer 5b479f7dcf
metadata: handle target build depends together with host build depends
Target build depends are similar to host build depends in that they refer
to source packages rather than binary packages. Therefore, it makes sense
to handle them together, rather than putting them in a list together with
runtime depends and trying to figure out if the entries refer to source or
to binary packages afterwards.

This does lead to PKG_BUILD_DEPENDS entries referring to binary package
names not working anymore, which requires some fixes in the package
repositories.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:44 +01:00
Matthias Schiffer 3abf663c22
build: remove package preconfig feature
This feature has been unused for years, and its scope is too limited to be
actually useful.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:44 +01:00
Matthias Schiffer 423ec18116
metadata: remove redundant fields from package hash
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:44 +01:00
Matthias Schiffer f0c702f124
metadata: replace %subdir hash with a path field in source packages
Every single reference to subdir was concatenated with the source package
name, so it makes sense to store the concatenated value instead.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:44 +01:00
Matthias Schiffer 504cb913eb
metadata: change pkg->{src} field to hold a reference
We often want to access fields of a source packages through pkg->{src}.
Allow accessing them directly instead of resolving the source hash through
srcpackages.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:44 +01:00
Matthias Schiffer 47f292ff78
metadata: interate over source packages when generating Makefile
All build dependencies are between source packages. Interating over source
rather than binary packages simplifies parts of the code and prepares
further improvement.

As a side effect, this changes the implicit default variant of a few
packages (the first defined is used now instead of the lexicographically
first).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:44 +01:00
Matthias Schiffer b2ab9c9d33
metadata: move 'builddepends' from binary to source packages
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:43 +01:00
Matthias Schiffer 39be6e7f19
metadata: move 'buildtypes' from binary to source packages
Build types are a property of source rather than binary packages. This is a
preparation for followup cleanup.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:43 +01:00
Matthias Schiffer 19577582e4
metadata: make srcpackage extensible
Turn the srcpackage values into hashes to allow storing more information
than just binary package names.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:43 +01:00
Matthias Schiffer 1a2b5eb7ac
metadata: remove 'base-files' special case
Nothing explicitly depends on base-files, and even if it would, it would
not cause any problems. Remove the unused special case.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:43 +01:00
Sven Eckelmann b02fa3336b om-fwupgradecfg-gen.sh: add support for the A42
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2018-01-13 07:58:49 +01:00