81ddc886e1
dgn3500 support with eeprom loading from sysfs
...
WIFI eeprom:
As discussed, it is impossible for nand and spi flash platforms to have the eeprom data available from mtd. I suggested to load the eeprom from user-space. I've looked into regular firmware loading but this is only possible when using modules. I've created a sysfs entry that allows reading and writing the eeprom data to the platform data. After loading the eeprom data I rely on pci-hotplug support to disable the bogus pci device and rescan the bus (with fixups and all). Because hotplug is not available, an init script is created that performs the copy from mtd to platform data. I think it is best to eventually move the sysfs functions to dev_wifi_athxk.c file, this would get rid of the external to the ath9k platform data.
SPI flash:
It seems that the spi-xway driver is not really working. It causes my kernel to crash in all sorts of ways. I added to bitbang SPI to be able to the calibration data mention above.
I've kept the original mtd partitioning that Netgear uses.
Buttons/LED:
Both buttons are working properly. Two leds are not enabled: The red internet led is connected to the pci_gnt1 pin... I can't disable it because then DMA stops working.
The green wifi led is connected to an unknown atheros gpio.
Signed-off-by: Pieter Voorthuijsen <p.voorthuijsen at gmail.com>
SVN-Revision: 31910
2012-05-27 16:02:22 +00:00
6e8fe84472
fixes zyxel p2601hnfx
...
moves the linux partition, removes the config partition and the
buttons settings have small adjustments.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
SVN-Revision: 31909
2012-05-27 16:02:20 +00:00
3f2f50c681
Add basic configuration for new board ZTE H201L. Still missing are button and led gpio values.
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
SVN-Revision: 31908
2012-05-27 16:02:16 +00:00
2ae5581447
kernel: update linux 3.3 to 3.3.7
...
SVN-Revision: 31848
2012-05-23 21:05:32 +00:00
9037c2ccc6
lantiq: allow platforms with rt2x00 to override the mac address without overriding eeprom, fixes bogus wlan mac address on arv4520
...
SVN-Revision: 31835
2012-05-20 21:58:03 +00:00
39994008cb
linux: move certain disabled symbols to the generic configs
...
* CONFIG_ARCH_DMA_ADDR_T_64BIT
* CONFIG_ARCH_HAS_ILOG2_U32
* CONFIG_ARCH_HAS_ILOG2_U64
* CONFIG_ARCH_PHYS_ADDR_T_64BIT
* CONFIG_ARCH_SUPPORTS_MSI
* CONFIG_GENERIC_CPU_DEVICES
* CONFIG_HWMON_DEBUG_CHIP
* CONFIG_I2C_PXA_PCI
* CONFIG_LEDS_GPIO
* CONFIG_MINIX_FS_NATIVE_ENDIAN
* CONFIG_MLX4_CORE
* CONFIG_POWER_SUPPLY
* CONFIG_POWER_SUPPLY_DEBUG
* CONFIG_QUOTACTL
* CONFIG_SDIO_UART
* CONFIG_SENSORS_K10TEMP
* CONFIG_SENSORS_SCH56XX_COMMON
* CONFIG_SENSORS_VIA_CPUTEMP
* CONFIG_SERIO_AMBAKMI
* CONFIG_SERIO_I8042
* CONFIG_SERIO_LIBPS2
* CONFIG_SERIO_PCIPS2
* CONFIG_SERIO_RAW
* CONFIG_SERIO_SERPORT
* CONFIG_SPI_BITBANG
* CONFIG_SPI_GPIO
SVN-Revision: 31737
2012-05-15 10:58:52 +00:00
364f47e454
code style cleanup of the mach files
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
SVN-Revision: 31735
2012-05-15 09:38:05 +00:00
07dca108a9
adds zyxel p2601hnfx support
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
SVN-Revision: 31734
2012-05-15 09:38:02 +00:00
9785ec070e
set 3.3.6 as default
...
SVN-Revision: 31733
2012-05-15 09:37:59 +00:00
c61ada1db8
set 3.3.5 as default
...
SVN-Revision: 31718
2012-05-14 16:11:26 +00:00
b472e5d12e
kernel: update linux 3.3 to 3.3.6
...
SVN-Revision: 31709
2012-05-14 09:18:32 +00:00
dc4cfd3a64
Add 3.3 config files
...
SVN-Revision: 31672
2012-05-09 12:52:24 +00:00
75827c538d
Add missing 3.3 patches
...
SVN-Revision: 31671
2012-05-09 12:52:21 +00:00
7d638fbb2f
Drop 2.6.32 support
...
SVN-Revision: 31670
2012-05-09 12:52:19 +00:00
34018a630f
kernel: update linux 3.3 to 3.3.5
...
SVN-Revision: 31645
2012-05-07 20:11:43 +00:00
0ff3c396d3
kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes
...
SVN-Revision: 31637
2012-05-06 21:19:14 +00:00
cbfce53831
kernel: update linux 3.3 to 3.3.4
...
SVN-Revision: 31541
2012-04-30 08:38:11 +00:00
22b4e6b882
kernel: update linux 3.2 to 3.2.16
...
SVN-Revision: 31459
2012-04-24 09:25:35 +00:00
d4f3677cba
Adding wifi eeprom extract for ARV752DPW - Easybox 802
...
Signed-off-by: Christian Rustmeier <rustmeier a.t. gmail dotty com>
SVN-Revision: 31443
2012-04-23 09:40:37 +00:00
87cdc0dd5b
change /etc/config/network according to actual VLAN config to enable LAN port 4 on the ARV4520PW board
...
The VLAN mapping on the ARV4520PW board is the following:
port on Router: | VLAN in software:
LAN 1 | 3
LAN 2 | 2
LAN 3 | 1
LAN 4 | 0
DSL | 4
So LAN4 is not VLAN4 but VLAN0 (VLAN4 is DSL port) -> set "3 2 1 0 5t" as default switch config.
SVN-Revision: 31391
2012-04-21 08:07:21 +00:00
a8f2bc682e
kernel: also update the targets to use 3.2.15
...
Thanks Gabor for spotting it.
SVN-Revision: 31337
2012-04-17 13:12:14 +00:00
3a9b6dc313
kernel: update linux 3.3 to 3.3.2
...
SVN-Revision: 31336
2012-04-17 12:51:02 +00:00
ee4c47a134
kernel: update linux 3.2 to 3.2.15
...
SVN-Revision: 31335
2012-04-17 12:50:54 +00:00
83948d6385
adds 3.3 patches and files
...
SVN-Revision: 31307
2012-04-16 12:31:48 +00:00
e3889bcf7c
update 3.2 patches
...
sync with lantiq kernel series
SVN-Revision: 31260
2012-04-12 12:33:56 +00:00
16b4cbcdd6
kernel: update linux 3.2 to 3.2.14
...
SVN-Revision: 31222
2012-04-09 14:48:51 +00:00
da3f3f8f9d
add Easybox 802 - ARV752DPW
...
Implements the ARV752DPW architecture in mach-arv.c
Signed-off-by: Christian Rustmeier <rustmeier@gmail.com>
SVN-Revision: 31206
2012-04-05 20:03:21 +00:00
94af65db49
enable usb on dgn3500
...
A power-enable toggle gpio is not available, it is always on and protected with a resettable fuse.
Signed-off-by: Pieter Voorthuijsen<p.voorthuijsen at gmail.com>
SVN-Revision: 31205
2012-04-05 20:03:19 +00:00
d87efd8c3c
kernel: update linux 3.2 to 3.2.13 and refresh patches
...
Also remove a duplicate patch from lantiq (already in generic).
SVN-Revision: 31158
2012-04-01 07:56:55 +00:00
5f799a0e97
ath9k: make endian check optional
...
Turns out it triggers on some AR71xx devices where no swapping should be done.
Enable endian check for the lantiq target.
SVN-Revision: 31084
2012-03-27 13:21:53 +00:00
b982e8166b
cleanup atheros wifi handling
...
Signed-off-by: Andrej Vlašić <andrej.vlasic0@gmail.com>
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
SVN-Revision: 31064
2012-03-25 08:50:38 +00:00
5ea100c39b
cleanup image makefile
...
SVN-Revision: 31063
2012-03-25 08:50:32 +00:00
f27c030141
update /etc/uci-defaults/*
...
SVN-Revision: 31062
2012-03-25 08:50:30 +00:00
ba4a7fca7b
update profiles
...
SVN-Revision: 31061
2012-03-25 08:50:27 +00:00
0f6a9d5c7c
bump kernel to 3.2.12
...
SVN-Revision: 31060
2012-03-25 08:50:09 +00:00
db6e326c56
targets: replace madwifi in profiles with ath5k, madwifi is unmaintained
...
SVN-Revision: 31015
2012-03-19 09:58:13 +00:00
fab5be9b4f
lantiq: load dwc_otg early
...
Needed for using external rootfs on usb sticks.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
SVN-Revision: 30940
2012-03-14 10:59:52 +00:00
e5798d7c9b
fixes etop locking issue
...
SVN-Revision: 30689
2012-02-23 07:42:00 +00:00
1a71f07d00
generate uboot environment data in target
...
With this patch it is possible to generate uboot environment config file
inside lantiq target. Currently it is only supporting GIGASX76X board.
uboot environment config is used by fw_printenv fw_setenv tools.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
SVN-Revision: 30537
2012-02-14 19:07:11 +00:00
7416a5f0aa
fix compile error in previous commit
...
SVN-Revision: 30534
2012-02-14 19:07:05 +00:00
cd1a204365
Support booting the Speedport W502V using BRN-BOOT.
...
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.
This patch add two firmware utilities, mkbrncmdline and mkbrnboot.
mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.
mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1 .
The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage
The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.
A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 30532
2012-02-14 17:48:04 +00:00
0b07769898
fixes irq locking in ethernet driver
...
SVN-Revision: 30522
2012-02-14 15:05:58 +00:00
55bf39e98c
fixes gpio_export patch
...
SVN-Revision: 30521
2012-02-14 15:05:57 +00:00
976d3eb854
add annex selection support to ltq_dsl package
...
SVN-Revision: 30518
2012-02-14 15:05:49 +00:00
1015fab0d7
kernel: update linux 3.1 to 3.1.10
...
SVN-Revision: 29966
2012-01-31 09:43:57 +00:00
49eb3fd845
gigaset 76x
...
* fixes leds
* adds all leds found on the sx763 board
* removes board_config from flash layout because wireless data is stored in kernel (ath5k)
* fix button handling
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
SVN-Revision: 29763
2012-01-17 12:10:35 +00:00
c560444a58
kernel: update linux 3.1 to 3.1.9
...
SVN-Revision: 29726
2012-01-13 14:38:28 +00:00
e33bb9ec66
linux: update 3.1 to 3.1.4
...
SVN-Revision: 29470
2011-12-06 19:50:30 +00:00
bf7316424c
lantiq: bump to 3.1.3
...
SVN-Revision: 29348
2011-11-28 10:22:58 +00:00
9389593db9
lantiq: drop 009-MIPS-make-oprofile-use-cp0_perfcount_irq-if-it-is-se.patch
...
This patch is/was a duplicate of generic/patches-3.1/307-mips_oprofile_fix.patch
SVN-Revision: 29294
2011-11-23 12:22:15 +00:00
4982ca983c
lantiq: * fixes ath5k eeprom handling * fixes sx76x * adds sx76x to userland api * minor style cleanups
...
Signed-of-by: Andrej Vlašić <andrej.vlasic0@gmail.com>
SVN-Revision: 29292
2011-11-22 18:50:51 +00:00
bbe96f13a6
lantiq: add runtime generation of /etc/config/network
...
SVN-Revision: 29161
2011-11-15 18:21:00 +00:00
79a4642b40
lantiq: fix falcon build breakage
...
dev-wifi-rt2x00 fails to build on falcon due to missing pci
SVN-Revision: 29129
2011-11-14 18:55:58 +00:00
d8acb75009
linux: update 3.1 to 3.1.1
...
SVN-Revision: 29007
2011-11-13 10:48:05 +00:00
a8797d0de6
lantiq: add uci-defaults code for handling leds
...
SVN-Revision: 29004
2011-11-12 23:40:21 +00:00
832e02cd77
lantiq: add /lib/lantiq.sh and make hotplug handlers use it
...
SVN-Revision: 29003
2011-11-12 23:40:16 +00:00
5dcbbf0160
lantiq: rename leds
...
SVN-Revision: 29002
2011-11-12 23:40:12 +00:00
d84b7596d9
lantiq: split compat headers out of bsp header patch
...
SVN-Revision: 29001
2011-11-12 23:40:07 +00:00
2cff80f015
lantiq: adds hotplug handler for loading rt2x00 firmware
...
SVN-Revision: 29000
2011-11-12 23:40:01 +00:00
3660c51c40
lantiq: adds hotplug handler for handling buttons and makes w303v work with it
...
SVN-Revision: 28999
2011-11-12 23:39:56 +00:00
4248705108
lantiq: cleanup default package selection
...
SVN-Revision: 28998
2011-11-12 23:39:51 +00:00
eb20ab87e6
lantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how to use it
...
SVN-Revision: 28994
2011-11-12 18:41:15 +00:00
fda4ee22a0
lantiq: improve falcon package selection
...
SVN-Revision: 28962
2011-11-11 21:59:11 +00:00
e1dc73be90
lantiq: fix breakage introduced in 3.1 bump
...
SVN-Revision: 28961
2011-11-11 21:59:01 +00:00
95d36d3efe
lantiq: remove obseleted folder. we use 3.1 now
...
SVN-Revision: 28728
2011-11-03 16:33:27 +00:00
ea36ad76bc
lantiq: bump to 3.1
...
SVN-Revision: 28721
2011-11-03 15:15:52 +00:00
0a866293bd
* update patches to 3.0
...
* add basic vr9 support
* backport 3.1 fixes
* backport 3.2 queue (falcon)
SVN-Revision: 28405
2011-10-10 15:13:46 +00:00
aecc73de77
The enable function was using the global timeout variable for local operations. This resulted in the value of the global variable being corrupted, thus breaking the code.
...
SVN-Revision: 28310
2011-09-26 10:35:51 +00:00
1ef8066bff
* remove obseleted m25p80 patch
...
SVN-Revision: 28309
2011-09-26 09:36:02 +00:00
cf59e7255d
* rebase 3.0 patches * fold some fixes into existing patches
...
SVN-Revision: 28308
2011-09-26 09:35:02 +00:00
09b1073f9b
kernel: update kernel to version 2.6.39.4
...
SVN-Revision: 28022
2011-08-16 22:04:10 +00:00
8acc276692
sync default kernel config for lantiq danube/ar9
...
SVN-Revision: 27697
2011-07-19 18:08:09 +00:00
500d7d4bc8
fix etehrnet when using EPHY on lantiq ASE
...
SVN-Revision: 27696
2011-07-19 18:06:52 +00:00
78a9b1a2ad
fixes pci on lantiq AR9 SoC
...
SVN-Revision: 27695
2011-07-19 18:06:42 +00:00
3833b7be24
add support for more lantiq AR9 boards
...
SVN-Revision: 27694
2011-07-19 18:06:33 +00:00
6b8c119b41
* fix external interrupts
...
SVN-Revision: 27687
2011-07-18 16:27:11 +00:00
5906377332
* add gigasx76x update
...
* rebase patches
* add arv752DPW arv7525PD
* fixes gpio_keys
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 27665
2011-07-17 19:27:44 +00:00
7f548d379f
fix generation of falcon images for profiles
...
SVN-Revision: 27550
2011-07-07 20:20:51 +00:00
d7732885ed
adds 2 ASC related patches to lantiq
...
Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
SVN-Revision: 27549
2011-07-07 20:20:46 +00:00
b75a8fb532
fix up falcon kernel config
...
SVN-Revision: 27542
2011-07-07 18:20:56 +00:00
036df9f088
fix i2c-falcon kmod package selection
...
SVN-Revision: 27541
2011-07-07 18:20:51 +00:00
a463daa818
replace all references to xway with danube
...
SVN-Revision: 27538
2011-07-07 18:20:37 +00:00
dc2af33083
fix lantiq image makefile to represent new split between ar9 and danube
...
SVN-Revision: 27537
2011-07-07 18:20:31 +00:00
3c1079a7a7
add ar9 specific profile
...
SVN-Revision: 27536
2011-07-07 18:20:27 +00:00
09d547eae4
rename xway profile to danube and remove ar9 specifics
...
SVN-Revision: 27535
2011-07-07 18:20:21 +00:00
f177052c9d
remove ar9 board from xway profiles
...
SVN-Revision: 27534
2011-07-07 18:20:16 +00:00
dc69e5f2e3
remove CONFIG_MTD_PARTITIONS references from lantiq 3.0 patches
...
SVN-Revision: 27532
2011-07-07 18:20:07 +00:00
a674aabe54
get ready for 3.0
...
SVN-Revision: 27496
2011-07-06 17:27:17 +00:00
d42f0c9a1b
fixes mtd maps for lantiq easy50712 and easy50601 evalkit. without this patch mini_fo/jffs caused the uboot to be overwritten on firstboot
...
SVN-Revision: 27489
2011-07-06 10:36:56 +00:00
29653782a9
set DEFAULT_SUBTARGET for lantiq/
...
SVN-Revision: 27445
2011-07-04 11:21:47 +00:00
04fefa4a28
fix broken falcon patches from last night
...
SVN-Revision: 27441
2011-07-04 07:50:34 +00:00
0a8430bfab
use netif_receive_skb on lantiq
...
Signed-off-by: Luca Olivetti <luca@ventoso.org>
SVN-Revision: 27410
2011-07-03 17:39:05 +00:00
058eca0b3b
automatic subtarget enumaration
...
SVN-Revision: 27407
2011-07-03 17:38:23 +00:00
43771202d3
update lantiq/falcon patches
...
SVN-Revision: 27406
2011-07-03 17:38:11 +00:00
d43cbe24a5
fix description for lantiq target
...
SVN-Revision: 27405
2011-07-03 17:37:57 +00:00
c5821c1a3a
kernel: update kernel to 2.6.39.2
...
SVN-Revision: 27298
2011-06-28 19:30:58 +00:00
0732b2db78
Fix for bug where the iniatialisation of the MAC data private strucure
...
is copied into the wrong location.
Ticket #9547
Signed-off-by: Conor O'Gorman <conor at dna.ie>
SVN-Revision: 27172
2011-06-13 22:37:23 +00:00
fa59bb0958
* move patches around * add basic support for gigaset sx76x
...
SVN-Revision: 27158
2011-06-12 08:56:26 +00:00
ed0e649a5b
* fixes spi flash for ar9
...
* adds limited support for netgear dgn3500 (enough for others to start working with)
SVN-Revision: 27137
2011-06-08 17:57:55 +00:00
763b58c30c
update to 2.6.39.1
...
patch from Peter Wagner
SVN-Revision: 27104
2011-06-04 13:35:55 +00:00
ba5b3ece5d
purge out CONFIG_CRYPTO* symbols out of target specific kernel configs since OpenWrt is taking care of them
...
SVN-Revision: 27036
2011-05-31 09:47:30 +00:00
6608f419d1
* backport 2.6.8 patches to .39 / .32.33
...
* remove lqtapi
* bump tapi/dsl to .39
* migrate to new ltq_ style api
* add amazon_se support
SVN-Revision: 27026
2011-05-29 21:19:26 +00:00
50c743e79e
kernel: Update to version 2.6.37.6
...
Thank you Peter Wagner for the patch
SVN-Revision: 26441
2011-04-03 13:59:07 +00:00
ba4dd89063
remove unknown package names from DEFAULT:=
...
SVN-Revision: 26403
2011-04-02 12:56:11 +00:00
628a47642c
* adds spi driver, thx daniel
...
SVN-Revision: 26355
2011-03-29 07:10:50 +00:00
ff885fde8e
* fix ARV7518PW support
...
SVN-Revision: 26354
2011-03-29 06:20:00 +00:00
08bb107823
* use netif_rx of the phydev if it is provided
...
SVN-Revision: 26353
2011-03-29 06:19:31 +00:00
5b0f2fb918
* shrink the memory window of the wdt
...
SVN-Revision: 26352
2011-03-29 05:18:08 +00:00
335877a2b3
global cflags: remove -funit-at-a-time, it is ignored by recent compilers. instead add -fno-caller-saves, which improves compression ratio for generated code with no apparent negative effects on performance
...
SVN-Revision: 26300
2011-03-26 01:07:12 +00:00
b8430e7427
update to 2.6.32.33 and 2.6.37.4
...
SVN-Revision: 26226
2011-03-18 13:25:32 +00:00
ba3251a90d
* fixes arv4510 board support * fixes nor swizzle hack * fixes gpio .can_sleep * fixes compile warning inside pci driver
...
SVN-Revision: 26157
2011-03-14 07:33:23 +00:00
1faf243c73
lantiq: add missing #include for the falcon i2c driver
...
SVN-Revision: 26152
2011-03-13 22:39:16 +00:00
4226f1d373
kernel: update to kernel version 2.6.37.3
...
SVN-Revision: 26126
2011-03-13 17:14:08 +00:00
c75b0ca1a8
* update kernel to .37 * add support for falcon (big thank you goes to lantiq !!)
...
SVN-Revision: 26021
2011-03-11 08:19:53 +00:00
31709b2c76
update to 2.6.35.11
...
SVN-Revision: 25582
2011-02-19 12:44:16 +00:00
34e5998921
* fixes dwc_otg init when power gpio is set to -1
...
SVN-Revision: 25521
2011-02-13 16:01:07 +00:00
2268dfafd3
* adds ath5k platform support * adds several new profiles
...
SVN-Revision: 25367
2011-02-04 22:49:52 +00:00
752dcaeaf4
* fixes old ifxmips in header file * pass default ebu value to gpio driver
...
SVN-Revision: 25366
2011-02-04 22:48:53 +00:00
f394bbbcaa
* fix usb compile warnings * fix timer header file which broke compile of external tapi driver * rebase patch
...
SVN-Revision: 25344
2011-02-03 17:34:55 +00:00
1e89df511a
* adds profiles to the kernel * fixes 2 compile errors in the usb driver * ioports were not allocated properly
...
SVN-Revision: 25278
2011-02-01 14:37:35 +00:00
a15b4bf6fc
* adds arv4518pw mach support * fixes arv4525pw * make sure all mach names have the same style * move code around
...
SVN-Revision: 25075
2011-01-23 19:16:33 +00:00
a8819fd220
adds machtype for ARV7518PW
...
SVN-Revision: 25074
2011-01-23 12:51:15 +00:00
699f5c8729
remove deadcode from [25072]
...
SVN-Revision: 25073
2011-01-23 12:12:23 +00:00
7c9e1370e9
* fix pci support for more than 1 device * fixes ioport mappings * adds support for arcor easybox 803/arv752DWP22 * gpio direction was not set properly during a gpio_request() * usb compile warning
...
bugfix, cleanup,
SVN-Revision: 25072
2011-01-23 12:08:44 +00:00
4d465f4036
* revert [25002] * fixes EBU ack when EBU causes an irq
...
SVN-Revision: 25047
2011-01-19 15:56:27 +00:00
63aeef20c0
move irq.c from patch into own file
...
SVN-Revision: 25002
2011-01-15 03:32:16 +00:00
1d6fbd2e85
* fixes duplicate registration of dwc_otg usb core
...
SVN-Revision: 24738
2010-12-20 17:56:09 +00:00
5e3e1d4a02
* make the usb gpio configurable * 105-header_xway.patch has a corrupt line count in it
...
SVN-Revision: 24564
2010-12-14 13:02:49 +00:00
9f47e80bb3
adds new lantiq kernel. once the codebase is fully tested and know to be working on all the devices previously supported by ifxmips, we will drop ifxmips support.
...
SVN-Revision: 24526
2010-12-12 22:57:16 +00:00
John Crispin
Gabor Juhos
Felix Fietkau
Jonas Gorski
Mirko Vogt
Hauke Mehrtens
Florian Fainelli
Imre Kaloz