ramips: rt305x: add initial support for Tenda W306R V2.0

More device info at: http://wiki.openwrt.org/toh/tenda/w306r

Signed-off-by: David Pearce <David_18051985@hotmail.com.au>
[juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages
from the profile, change broken GPIO number]

SVN-Revision: 31396

target/linux/ramips/base-files/etc/diag.sh

@@ -81,6 +81,9 @@ get_status_led() {
 	v22rw-2x2)
 		status_led="v22rw-2x2:green:security"
 		;;
+	w306r-v20)
+		status_led="w306r:green:sys"
+		;;
 	w502u)
 		status_led="alfa:blue:wps"
 		;;

target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom

@@ -65,6 +65,7 @@ case "$FIRMWARE" in
 	sl-r7205 | \
 	v11st-fe | \
 	v22rw-2x2 | \
+	w306r-v20 | \
 	w502u | \
 	wcr-150gn | \
 	whr-g300n | \

target/linux/ramips/base-files/etc/uci-defaults/leds

@@ -66,6 +66,9 @@ case $board in
 	v11st-fe)
 		set_wifi_led "rt2800pci-phy0::radio"
 		;;
+	w306r-v20)
+		set_wifi_led "rt2800pci-phy0::radio"
+		;;
 	w502u)
 		set_usb_led "alfa:blue:usb"
 		set_wifi_led "rt2800pci-phy0::radio"

target/linux/ramips/base-files/etc/uci-defaults/network

@@ -55,6 +55,7 @@ ramips_setup_interfaces()
 		;;
 
 	freestation5 | \
+	w306r-v20 | \
 	wcr-150gn)
 		ucidef_set_interfaces_lan_wan "eth0.2" "eth0.1"
 		;;
@@ -96,6 +97,11 @@ ramips_setup_macs()
 		wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
 		;;
 
+	w306r-v20)
+		lan_mac=$(ramips_get_mac_binary factory 4)
+		wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 5)
+		;;
+
 	dir-300-b1 |\
 	dir-300-b2 |\
 	dir-600-b1)

target/linux/ramips/base-files/lib/preinit/06_set_iface_mac

@@ -28,6 +28,7 @@ preinit_set_mac_address() {
 	hw550-3g |\
 	nbg-419n |\
 	omni-emb |\
+	w306r-v20 |\
 	w502u    |\
 	wl-330n |\
 	wr6202 |\

target/linux/ramips/base-files/lib/ramips.sh

@@ -134,6 +134,9 @@ ramips_board_name() {
 	*"Sitecom WL-351 v1 002")
 		name="wl-351"
 		;;
+	*"Tenda W306R V2.0")
+		name="w306r-v20"
+		;;
 	*"Ralink V11ST-FE")
 		name="v11st-fe"
 		;;

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -32,6 +32,7 @@ platform_check_image() {
 	rt-n15 | \
 	rt-n56u | \
 	sl-r7205 | \
+	w306r-v20 |\
 	w502u |\
 	wr6202 |\
 	v22rw-2x2 | \

target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h

@@ -45,6 +45,7 @@ enum ramips_mach_type {
 	RAMIPS_MACH_PWH2004,		/* Prolink 2004H / Abocom 5205 */
 	RAMIPS_MACH_SL_R7205,		/* Skylink SL-R7205 Wireless 3G Router*/
 	RAMIPS_MACH_V22RW_2X2,		/* Ralink AP-RT3052-V22RW-2X2 */
+	RAMIPS_MACH_W306R_V20,	        /* Tenda W306R_V20 */
 	RAMIPS_MACH_W502U,		/* ALFA Networks W502U */
 	RAMIPS_MACH_WCR150GN,		/* Sparklan WCR-150GN */
 	RAMIPS_MACH_WHR_G300N,		/* Buffalo WHR-G300N */

target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig

@@ -104,6 +104,11 @@ config RT305X_MACH_V22RW_2X2
 	select RALINK_DEV_GPIO_BUTTONS
 	select RALINK_DEV_GPIO_LEDS
 
+config RT305X_MACH_W306R_V20
+	bool "Tenda W306R V2.0 board support"
+	select RALINK_DEV_GPIO_BUTTONS
+	select RALINK_DEV_GPIO_LEDS
+
 config RT305X_MACH_WL341V3
 	bool "Sitecom WL-341 v3 board support"
 	select RALINK_DEV_GPIO_BUTTONS

target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile

@@ -29,6 +29,7 @@ obj-$(CONFIG_RT305X_MACH_RT_G32_REVB)	+= mach-rt-g32-revb.o
 obj-$(CONFIG_RT305X_MACH_RT_N10_PLUS)	+= mach-rt-n10-plus.o
 obj-$(CONFIG_RT305X_MACH_SL_R7205)	+= mach-sl-r7205.o
 obj-$(CONFIG_RT305X_MACH_V22RW_2X2)	+= mach-v22rw-2x2.o
+obj-$(CONFIG_RT305X_MACH_W306R_V20) 	+= mach-w306r-v20.o
 obj-$(CONFIG_RT305X_MACH_W502U)		+= mach-w502u.o
 obj-$(CONFIG_RT305X_MACH_WCR150GN)	+= mach-wcr150gn.o
 obj-$(CONFIG_RT305X_MACH_WHR_G300N)	+= mach-whr-g300n.o

target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w306r-v20.c

@@ -0,0 +1,72 @@
+/*
+ *  Tenda W306R V2.0 board support
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ethtool.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt305x.h>
+#include <asm/mach-ralink/rt305x_regs.h>
+#include <asm/mach-ralink/ramips_eth_platform.h>
+
+#include "devices.h"
+
+#define W306R_V20_GPIO_LED_SYS		9 /* FIXME */
+#define W306R_V20_GPIO_LED_WPS		13
+
+#define W306R_V20_GPIO_BUTTON_RESET	10
+
+#define W306R_V20_KEYS_POLL_INTERVAL	20
+#define W306R_V20_KEYS_DEBOUNCE_INTERVAL (3 * W306R_V20_KEYS_POLL_INTERVAL)
+
+static struct gpio_led w306r_v20_leds_gpio[] __initdata = {
+	{
+		.name		= "w306r-v20:green:sys",
+		.gpio		= W306R_V20_GPIO_LED_SYS,
+		.active_low	= 1,
+	}, {
+		.name		= "w306r-v20:green:wps",
+		.gpio		= W306R_V20_GPIO_LED_WPS,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_keys_button w306r_v20_gpio_buttons[] __initdata = {
+	{
+		.desc		= "RESET/WPS",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = W306R_V20_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= W306R_V20_GPIO_BUTTON_RESET,
+		.active_low	= 1,
+	}
+};
+
+static void __init w306r_v20_init(void)
+{
+	rt305x_register_flash(0);
+
+	rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
+
+	rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
+	rt305x_register_ethernet();
+	ramips_register_gpio_leds(-1, ARRAY_SIZE(w306r_v20_leds_gpio),
+				  w306r_v20_leds_gpio);
+	ramips_register_gpio_buttons(-1, W306R_V20_KEYS_POLL_INTERVAL,
+				     ARRAY_SIZE(w306r_v20_gpio_buttons),
+				     w306r_v20_gpio_buttons);
+	rt305x_register_wifi();
+	rt305x_register_wdt();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_W306R_V20, "W306R_V20", "Tenda W306R V2.0",
+	     w306r_v20_init);

target/linux/ramips/image/Makefile

@@ -371,6 +371,10 @@ define Image/Build/Profile/V22RW2X2
 	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,v22rw-2x2,V22RW-2X2,ttyS1,57600,phys)
 endef
 
+define Image/Build/Profile/W306R_V20
+	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,w306r-v20,W306R_V20,ttyS1,57600,phys)
+endef
+
 define Image/Build/Profile/W502U
 	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,w502u,W502U,ttyS1,115200,phys)
 endef
@@ -428,6 +432,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/RTG32B1,$(1))
 	$(call Image/Build/Profile/SLR7205,$(1))
 	$(call Image/Build/Profile/V22RW2X2,$(1))
+	$(call Image/Build/Profile/W306R_V20,$(1))
 	$(call Image/Build/Profile/W502U,$(1))
 	$(call Image/Build/Profile/WCR150GN,$(1))
 	$(call Image/Build/Profile/WHRG300N,$(1))

target/linux/ramips/rt305x/config-3.2

@@ -111,6 +111,7 @@ CONFIG_RT305X_MACH_RT_G32_REVB=y
 CONFIG_RT305X_MACH_RT_N10_PLUS=y
 CONFIG_RT305X_MACH_SL_R7205=y
 CONFIG_RT305X_MACH_V22RW_2X2=y
+CONFIG_RT305X_MACH_W306R_V20=y
 CONFIG_RT305X_MACH_W502U=y
 CONFIG_RT305X_MACH_WCR150GN=y
 CONFIG_RT305X_MACH_WHR_G300N=y

target/linux/ramips/rt305x/profiles/tenda.mk

@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/W306R_V20
+	NAME:=Tenda W306R V2.0
+	PACKAGES:=
+endef
+
+define Profile/W306R_V20/Description
+	Package set for Tenda W306R V2.0 board
+endef
+
+$(eval $(call Profile,W306R_V20))