ar71xx: add a helper function to set RXDV/RXD of ETH_CFG on AR934x

The ETH_RXDV_DELAY (17:16) and ETH_RXD_DELAY (15:14) are currently not cleared
by the function ath79_setup_ar934x_eth_cfg. Clearing these in the
ath79_setup_ar934x_eth_cfg may cause problems on some hardware because they
rely on the preset value by the bootloader.

Instead another function is introduced which also works on ETH_CFG on AR934x.
It can be used to safely clear and set ETH_RXDV_DELAY and ETH_RXD_DELAY on
machines which require special settings.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 45523
lede-17.01
Felix Fietkau 2015-04-20 15:00:52 +00:00
parent c75a0e86b1
commit f4e6418a32
2 changed files with 27 additions and 0 deletions

View File

@ -769,6 +769,32 @@ void __init ath79_setup_ar934x_eth_cfg(u32 mask)
iounmap(base);
}
void __init ath79_setup_ar934x_eth_rx_delay(unsigned int rxd,
unsigned int rxdv)
{
void __iomem *base;
u32 t;
rxd &= AR934X_ETH_CFG_RXD_DELAY_MASK;
rxdv &= AR934X_ETH_CFG_RDV_DELAY_MASK;
base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
t &= ~(AR934X_ETH_CFG_RXD_DELAY_MASK << AR934X_ETH_CFG_RXD_DELAY_SHIFT |
AR934X_ETH_CFG_RDV_DELAY_MASK << AR934X_ETH_CFG_RDV_DELAY_SHIFT);
t |= (rxd << AR934X_ETH_CFG_RXD_DELAY_SHIFT |
rxdv << AR934X_ETH_CFG_RDV_DELAY_SHIFT);
__raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
/* flush write */
__raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
iounmap(base);
}
void __init ath79_setup_qca955x_eth_cfg(u32 mask)
{
void __iomem *base;

View File

@ -47,6 +47,7 @@ void ath79_register_mdio(unsigned int id, u32 phy_mask);
void ath79_setup_ar933x_phy4_switch(bool mac, bool mdio);
void ath79_setup_ar934x_eth_cfg(u32 mask);
void ath79_setup_ar934x_eth_rx_delay(unsigned int rxd, unsigned int rxdv);
void ath79_setup_qca955x_eth_cfg(u32 mask);
#endif /* _ATH79_DEV_ETH_H */