ath79: gmac: add parsers for rxd(v)- and tx(d|en)-delay for AR9344

Some AR9344 boards do very poorly with the default settings and
need custom rxdv-delay, rxd-delay, txd-delay, txen-delay flags
to perform reasonably.

In this case the WD My Net Wi-Fi Range Extender can not even
manage 10Mbps on a 1Gbit link:

root@AR9344:~# iperf3 -s
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from client [...]
[  5] local [...] connected to client
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  1.09 MBytes  9.16 Mbits/sec
[  5]   1.00-2.00   sec   895 KBytes  7.33 Mbits/sec
[  5]   2.00-3.00   sec   762 KBytes  6.25 Mbits/sec
[...]
[  5]  10.00-10.03  sec  17.0 KBytes  4.74 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-10.03  sec  9.00 MBytes  7.52 Mbits/sec

with but with the correct settings in place, it does much better:

root@AR9344:~# iperf3 -s
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from client [...]
[  5] local [...] connected to client
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  23.1 MBytes   193 Mbits/sec
[  5]   1.00-2.00   sec  23.1 MBytes   194 Mbits/sec
[  5]   2.00-3.00   sec  23.2 MBytes   195 Mbits/sec
[...]
[  5]  10.00-10.04  sec   710 KBytes   180 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-10.04  sec   237 MBytes   198 Mbits/sec

The tx data and enable delay bits definitions are taken from Atheros'
AR9344 Data Sheet Section "8.6.1 Ethernet Configuration (ETH_CFG)" on
page 153.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
openwrt-19.07
Christian Lamparter 2018-08-10 23:24:47 +02:00 committed by John Crispin
parent 7b1b49bd32
commit f3ffac90bc
2 changed files with 13 additions and 1 deletions

View File

@ -57,6 +57,14 @@ static void ag71xx_setup_gmac_934x(struct device_node *np, void __iomem *base)
ag71xx_of_bit(np, "switch-phy-swap", &val, AR934X_ETH_CFG_SW_PHY_SWAP);
ag71xx_of_bit(np, "switch-only-mode", &val,
AR934X_ETH_CFG_SW_ONLY_MODE);
ag71xx_of_set(np, "rxdv-delay", &val,
AR934X_ETH_CFG_RDV_DELAY_SHIFT, 0x3);
ag71xx_of_set(np, "rxd-delay", &val,
AR934X_ETH_CFG_RXD_DELAY_SHIFT, 0x3);
ag71xx_of_set(np, "txd-delay", &val,
AR934X_ETH_CFG_TXD_DELAY_SHIFT, 0x3);
ag71xx_of_set(np, "txen-delay", &val,
AR934X_ETH_CFG_TXE_DELAY_SHIFT, 0x3);
__raw_writel(val, base + AR934X_GMAC_REG_ETH_CFG);
}

View File

@ -650,7 +650,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
/*
* SRIF block
@@ -552,4 +1007,318 @@
@@ -552,4 +1007,322 @@
#define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13
#define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7
@ -876,6 +876,10 @@ Signed-off-by: John Crispin <john@phrozen.org>
+#define AR934X_ETH_CFG_RDV_DELAY BIT(16)
+#define AR934X_ETH_CFG_RDV_DELAY_MASK 0x3
+#define AR934X_ETH_CFG_RDV_DELAY_SHIFT 16
+#define AR934X_ETH_CFG_TXD_DELAY_MASK 0x3
+#define AR934X_ETH_CFG_TXD_DELAY_SHIFT 18
+#define AR934X_ETH_CFG_TXE_DELAY_MASK 0x3
+#define AR934X_ETH_CFG_TXE_DELAY_SHIFT 20
+
+/*
+ * QCA953X GMAC Interface