mirror of https://github.com/hak5/openwrt.git
ramips: add support for Edimax RG21S
SoC: MediaTek MT7621AT dual-core @ 880MHz RAM: 256M (Nanya NT5CC128M) FLASH: 16MB (Macronix MX25L12835F) WiFi: - 2.4GHz MediaTek MT7615N bgn - 5GHz MediaTek MT7615N nac Switch: SoC integrated Gigabit Switch (4 x LAN, 1 x WAN) USB: No BTN: Reset, WPS LED: 4 red LEDs, indistinguishable when casing closed UART: UART is present as Pads marked J1 on the PCB. 3.3V - RX - GND - TX / 57600-8N1 3.3V is the square pad Installation ------------ Update the factory image via the OEM web-interface (by default:http://192.168.1.1) The sysupgrade image can be installed via TFTP from the U-Boot bootloader. Connect ethernet port 2. Signed-off-by: Birger Koblitz <mail@birger-koblitz.de> [flash node rename, EDIMAX -> Edimax, complete device model name] Signed-off-by: Petr Štetiar <ynezz@true.cz>master
Birger Koblitz
Petr Štetiar
parent
2e2fe82d1e
commit
f285e8634c
|
|
@ -333,6 +333,10 @@ ramips_setup_interfaces()
|
|||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "4:wan" "6@eth0"
|
||||
;;
|
||||
edimax,rg21s)
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
|
||||
;;
|
||||
gehua,ghl-r-001)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "1:lan" "2:lan" "4:wan" "6@eth0"
|
||||
|
|
@ -624,6 +628,10 @@ ramips_setup_macs()
|
|||
netgear,r6850)
|
||||
wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
|
||||
;;
|
||||
edimax,rg21s)
|
||||
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
|
||||
wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
|
||||
;;
|
||||
hiwifi,hc5661|\
|
||||
hiwifi,hc5661a|\
|
||||
hiwifi,hc5761|\
|
||||
|
|
|
|||
|
|
@ -0,0 +1,155 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "edimax,rg21s", "mediatek,mt7621-soc";
|
||||
model = "Edimax RG21S";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power;
|
||||
led-failsafe = &led_power;
|
||||
led-running = &led_power;
|
||||
led-upgrade = &led_power;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
palmbus: palmbus@1E000000 {
|
||||
i2c@900 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power: led_1 {
|
||||
label = "rg21s:red:led1";
|
||||
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_2 {
|
||||
label = "rg21s:red:led2";
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_3 {
|
||||
label = "rg21s:red:led3";
|
||||
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_4 {
|
||||
label = "rg21s:red:led4";
|
||||
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0xfb0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi0: wifi@0,0 {
|
||||
compatible = "pci14c3,7615";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0000>;
|
||||
ieee80211-freq-limit = <2400000 2500000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
wifi1: wifi@0,0 {
|
||||
compatible = "pci14c3,7615";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mediatek,portmap = "wllll";
|
||||
port@5 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
gpio {
|
||||
ralink,group = "wdt", "rgmii2", "jtag", "mdio";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&xhci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -30,6 +30,25 @@ define Build/elecom-wrc-factory
|
|||
mv $@.new $@
|
||||
endef
|
||||
|
||||
define Build/elx-header
|
||||
$(eval hw_id=$(word 1,$(1)))
|
||||
$(eval xor_pattern=$(word 2,$(1)))
|
||||
( \
|
||||
echo -ne "\x00\x00\x00\x00\x00\x00\x00\x03" | \
|
||||
dd bs=42 count=1 conv=sync; \
|
||||
hw_id="$(hw_id)"; \
|
||||
echo -ne "\x$${hw_id:0:2}\x$${hw_id:2:2}\x$${hw_id:4:2}\x$${hw_id:6:2}" | \
|
||||
dd bs=20 count=1 conv=sync; \
|
||||
echo -ne "$$(printf '%08x' $$(stat -c%s $@) | fold -s2 | xargs -I {} echo \\x{} | tr -d '\n')" | \
|
||||
dd bs=8 count=1 conv=sync; \
|
||||
echo -ne "$$($(STAGING_DIR_HOST)/bin/mkhash md5 $@ | fold -s2 | xargs -I {} echo \\x{} | tr -d '\n')" | \
|
||||
dd bs=58 count=1 conv=sync; \
|
||||
) > $(KDIR)/tmp/$(DEVICE_NAME).header
|
||||
$(call Build/xor-image,-p $(xor_pattern) -x)
|
||||
cat $(KDIR)/tmp/$(DEVICE_NAME).header $@ > $@.new
|
||||
mv $@.new $@
|
||||
endef
|
||||
|
||||
define Build/iodata-factory
|
||||
$(eval fw_size=$(word 1,$(1)))
|
||||
$(eval fw_type=$(word 2,$(1)))
|
||||
|
|
@ -173,6 +192,20 @@ define Device/d-team_pbr-m1
|
|||
endef
|
||||
TARGET_DEVICES += d-team_pbr-m1
|
||||
|
||||
define Device/edimax_rg21s
|
||||
MTK_SOC := mt7621
|
||||
IMAGE_SIZE := 16064k
|
||||
DEVICE_VENDOR := Edimax
|
||||
DEVICE_MODEL := Gemini AC2600 RG21S
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := \
|
||||
$$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
|
||||
elx-header 02020038 8844A2D168B45A2D
|
||||
DEVICE_PACKAGES := \
|
||||
kmod-mt7615e wpad-basic
|
||||
endef
|
||||
TARGET_DEVICES += edimax_rg21s
|
||||
|
||||
define Device/elecom_wrc-1167ghbk2-s
|
||||
MTK_SOC := mt7621
|
||||
IMAGE_SIZE := 15488k
|
||||
|
|
|
|||
Loading…
Reference in New Issue