ramips: add support for Planex MZK-DP150N

This patch add support for Planex MZK-DP150N.
a mini router on the MT7620A SoC with one Ethernet port and a 802.11n 2.4 GHz radio.

Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>

SVN-Revision: 46405
lede-17.01
John Crispin 2015-07-17 12:51:08 +00:00
parent 84b89e4ec4
commit eff79253f2
8 changed files with 135 additions and 0 deletions

View File

@ -265,6 +265,9 @@ case $board in
zte-q7)
set_wifi_led "zte:blue:status"
;;
mzk-dp150n)
ucidef_set_led_default "power" "power" "mzkdp150n:green:power" "1"
;;
esac
board_config_flush

View File

@ -261,6 +261,13 @@ ramips_setup_interfaces()
ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
ucidef_add_switch_vlan "switch0" "2" "0 5t"
;;
mzk-dp150n)
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 4 6t"
;;
*)
RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"`
if [ -n "${RT3X5X}" ]; then

View File

@ -249,6 +249,9 @@ get_status_led() {
zte-q7)
status_led="zte:red:status"
;;
mzk-dp150n)
status_led="mzkdp150n:green:power"
;;
esac
}

View File

@ -421,6 +421,9 @@ ramips_board_detect() {
*"Mediatek MT7628AN evaluation board")
name="mt7628"
;;
*"Planex MZK-DP150N")
name="mzk-dp150n"
;;
*)
name="generic"
;;

View File

@ -71,6 +71,7 @@ platform_check_image() {
mpr-a2 | \
mr-102n | \
mzk-w300nh2 | \
mzk-dp150n | \
nbg-419n | \
nw718 | \
omni-emb | \

View File

@ -0,0 +1,98 @@
/dts-v1/;
/include/ "rt5350.dtsi"
/ {
compatible = "MZK-DP150N", "ralink,rt5350-soc";
model = "Planex MZK-DP150N";
palmbus@10000000 {
gpio1: gpio@660 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "s25fl064k";
reg = <0>;
linux,modalias = "m25p80", "s25fl064k";
spi-max-frequency = <10000000>;
partition@0 {
label = "uboot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x3b0000>;
};
};
spidev@1 {
compatible = "linux,spidev";
spi-max-frequency = <10000000>;
reg = <1>;
};
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "jtag", "uartf", "led";
ralink,function = "gpio";
};
};
};
ethernet@10100000 {
mtd-mac-address = <&factory 0x4>;
};
esw@10110000 {
ralink,portmap = <0x17>;
};
wmac@10180000 {
ralink,mtd-eeprom = <&factory 0>;
ralink,led-polarity = <1>;
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "mzkdp150n:green:power";
gpios = <&gpio0 9 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
};
};

View File

@ -609,6 +609,8 @@ Image/Build/Profile/W502U=$(call BuildFirmware/Default8M/$(1),$(1),w502u,W502U)
Image/Build/Profile/WCR150GN=$(call BuildFirmware/Default4M/$(1),$(1),wcr150gn,WCR150GN)
Image/Build/Profile/MZK-DP150N=$(call BuildFirmware/Default4M/$(1),$(1),mzk-dp150n,MZK-DP150N)
buffalo_whrg300n_mtd_size=3801088
define BuildFirmware/WHRG300N/squashfs
$(call BuildFirmware/Default4M/$(1),$(1),whr-g300n,WHR-G300N)
@ -772,6 +774,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/X5,$(1))
$(call Image/Build/Profile/X8,$(1))
$(call Image/Build/Profile/XDXRN502J,$(1))
$(call Image/Build/Profile/MZK-DP150N,$(1))
endef
endif

View File

@ -0,0 +1,17 @@
#
# Copyright (C) 2014 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
define Profile/MZK-DP150N
NAME:=Planex MZK-DP150N
PACKAGES:= kmod-spi-dev
endef
define Profile/MZK-DP150N/Description
Package set optimized for the Planex MZK-DP150N.
endef
$(eval $(call Profile,MZK-DP150N))