mirror of https://github.com/hak5/openwrt.git
imx6: drop 3.12 support
Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 39574lede-17.01
Luka Perkov
parent
3203599a7d
commit
ef5c3bbb5f
|
|
@ -1,358 +0,0 @@
|
||||||
CONFIG_AHCI_IMX=y
|
|
||||||
CONFIG_ALIGNMENT_TRAP=y
|
|
||||||
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
|
|
||||||
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
|
|
||||||
CONFIG_ARCH_HAS_CPUFREQ=y
|
|
||||||
CONFIG_ARCH_HAS_OPP=y
|
|
||||||
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
|
|
||||||
CONFIG_ARCH_HAS_TICK_BROADCAST=y
|
|
||||||
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
|
|
||||||
CONFIG_ARCH_MULTIPLATFORM=y
|
|
||||||
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
|
|
||||||
CONFIG_ARCH_MULTI_V6_V7=y
|
|
||||||
CONFIG_ARCH_MULTI_V7=y
|
|
||||||
CONFIG_ARCH_MXC=y
|
|
||||||
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
|
|
||||||
CONFIG_ARCH_NR_GPIO=0
|
|
||||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
|
||||||
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
|
|
||||||
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
|
|
||||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
|
||||||
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
|
|
||||||
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
|
|
||||||
CONFIG_ARM=y
|
|
||||||
# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
|
|
||||||
# CONFIG_ARM_CPU_SUSPEND is not set
|
|
||||||
CONFIG_ARM_ERRATA_754322=y
|
|
||||||
CONFIG_ARM_ERRATA_764369=y
|
|
||||||
CONFIG_ARM_ERRATA_775420=y
|
|
||||||
CONFIG_ARM_GIC=y
|
|
||||||
CONFIG_ARM_IMX6Q_CPUFREQ=y
|
|
||||||
# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
|
|
||||||
CONFIG_ARM_L1_CACHE_SHIFT=6
|
|
||||||
CONFIG_ARM_L1_CACHE_SHIFT_6=y
|
|
||||||
# CONFIG_ARM_LPAE is not set
|
|
||||||
CONFIG_ARM_NR_BANKS=8
|
|
||||||
CONFIG_ARM_PATCH_PHYS_VIRT=y
|
|
||||||
CONFIG_ARM_THUMB=y
|
|
||||||
# CONFIG_ARM_THUMBEE is not set
|
|
||||||
CONFIG_ARM_VIRT_EXT=y
|
|
||||||
CONFIG_ATA=y
|
|
||||||
CONFIG_ATAGS=y
|
|
||||||
# CONFIG_ATA_SFF is not set
|
|
||||||
CONFIG_AUTO_ZRELADDR=y
|
|
||||||
# CONFIG_CACHE_L2X0 is not set
|
|
||||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
|
||||||
CONFIG_CLKDEV_LOOKUP=y
|
|
||||||
CONFIG_CLKSRC_MMIO=y
|
|
||||||
CONFIG_CLKSRC_OF=y
|
|
||||||
CONFIG_CLONE_BACKWARDS=y
|
|
||||||
CONFIG_COMMON_CLK=y
|
|
||||||
CONFIG_CPU_32v6K=y
|
|
||||||
CONFIG_CPU_32v7=y
|
|
||||||
CONFIG_CPU_ABRT_EV7=y
|
|
||||||
# CONFIG_CPU_BPREDICT_DISABLE is not set
|
|
||||||
CONFIG_CPU_CACHE_V7=y
|
|
||||||
CONFIG_CPU_CACHE_VIPT=y
|
|
||||||
CONFIG_CPU_COPY_V6=y
|
|
||||||
CONFIG_CPU_CP15=y
|
|
||||||
CONFIG_CPU_CP15_MMU=y
|
|
||||||
CONFIG_CPU_FREQ=y
|
|
||||||
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
|
|
||||||
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
|
|
||||||
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
|
|
||||||
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
|
|
||||||
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
|
|
||||||
CONFIG_CPU_FREQ_GOV_COMMON=y
|
|
||||||
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
|
|
||||||
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
|
|
||||||
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
|
||||||
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
|
|
||||||
CONFIG_CPU_FREQ_GOV_USERSPACE=y
|
|
||||||
CONFIG_CPU_FREQ_STAT=y
|
|
||||||
CONFIG_CPU_FREQ_STAT_DETAILS=y
|
|
||||||
CONFIG_CPU_FREQ_TABLE=y
|
|
||||||
CONFIG_CPU_HAS_ASID=y
|
|
||||||
# CONFIG_CPU_ICACHE_DISABLE is not set
|
|
||||||
CONFIG_CPU_PABRT_V7=y
|
|
||||||
CONFIG_CPU_RMAP=y
|
|
||||||
CONFIG_CPU_TLB_V7=y
|
|
||||||
CONFIG_CPU_V7=y
|
|
||||||
CONFIG_CRC16=y
|
|
||||||
CONFIG_CRYPTO_CRC32C=y
|
|
||||||
CONFIG_CRYPTO_DEFLATE=y
|
|
||||||
CONFIG_CRYPTO_HASH=y
|
|
||||||
CONFIG_CRYPTO_HASH2=y
|
|
||||||
CONFIG_CRYPTO_LZO=y
|
|
||||||
CONFIG_CRYPTO_XZ=y
|
|
||||||
CONFIG_DCACHE_WORD_ACCESS=y
|
|
||||||
CONFIG_DEBUG_IMX_UART_PORT=1
|
|
||||||
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
|
|
||||||
# CONFIG_DEBUG_UART_8250 is not set
|
|
||||||
# CONFIG_DEBUG_UART_PL01X is not set
|
|
||||||
# CONFIG_DEBUG_USER is not set
|
|
||||||
CONFIG_DECOMPRESS_BZIP2=y
|
|
||||||
CONFIG_DECOMPRESS_GZIP=y
|
|
||||||
CONFIG_DECOMPRESS_LZO=y
|
|
||||||
CONFIG_DECOMPRESS_XZ=y
|
|
||||||
# CONFIG_DGNC is not set
|
|
||||||
CONFIG_DMADEVICES=y
|
|
||||||
CONFIG_DMA_ENGINE=y
|
|
||||||
CONFIG_DMA_OF=y
|
|
||||||
CONFIG_DTC=y
|
|
||||||
# CONFIG_DW_DMAC_CORE is not set
|
|
||||||
# CONFIG_DW_DMAC_PCI is not set
|
|
||||||
CONFIG_EXT2_FS=y
|
|
||||||
CONFIG_EXT2_FS_POSIX_ACL=y
|
|
||||||
CONFIG_EXT2_FS_SECURITY=y
|
|
||||||
CONFIG_EXT2_FS_XATTR=y
|
|
||||||
CONFIG_EXT3_FS=y
|
|
||||||
CONFIG_EXT3_FS_POSIX_ACL=y
|
|
||||||
CONFIG_EXT3_FS_SECURITY=y
|
|
||||||
CONFIG_EXT3_FS_XATTR=y
|
|
||||||
CONFIG_EXT4_FS=y
|
|
||||||
CONFIG_EXT4_FS_POSIX_ACL=y
|
|
||||||
CONFIG_EXT4_FS_SECURITY=y
|
|
||||||
CONFIG_FEC=y
|
|
||||||
CONFIG_FRAME_POINTER=y
|
|
||||||
CONFIG_FS_MBCACHE=y
|
|
||||||
CONFIG_FS_POSIX_ACL=y
|
|
||||||
CONFIG_GENERIC_ALLOCATOR=y
|
|
||||||
CONFIG_GENERIC_BUG=y
|
|
||||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
|
||||||
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
|
|
||||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
|
||||||
CONFIG_GENERIC_CPUFREQ_CPU0=y
|
|
||||||
CONFIG_GENERIC_IDLE_POLL_SETUP=y
|
|
||||||
CONFIG_GENERIC_IO=y
|
|
||||||
CONFIG_GENERIC_IRQ_CHIP=y
|
|
||||||
CONFIG_GENERIC_IRQ_SHOW=y
|
|
||||||
CONFIG_GENERIC_NET_UTILS=y
|
|
||||||
CONFIG_GENERIC_PCI_IOMAP=y
|
|
||||||
CONFIG_GENERIC_SCHED_CLOCK=y
|
|
||||||
CONFIG_GENERIC_SMP_IDLE_THREAD=y
|
|
||||||
CONFIG_GENERIC_STRNCPY_FROM_USER=y
|
|
||||||
CONFIG_GENERIC_STRNLEN_USER=y
|
|
||||||
CONFIG_GPIOLIB=y
|
|
||||||
CONFIG_GPIO_DEVRES=y
|
|
||||||
CONFIG_GPIO_GENERIC=y
|
|
||||||
CONFIG_GPIO_MXC=y
|
|
||||||
CONFIG_GPIO_SYSFS=y
|
|
||||||
# CONFIG_HAMRADIO is not set
|
|
||||||
CONFIG_HARDIRQS_SW_RESEND=y
|
|
||||||
CONFIG_HAS_DMA=y
|
|
||||||
CONFIG_HAS_IOMEM=y
|
|
||||||
CONFIG_HAS_IOPORT=y
|
|
||||||
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
|
|
||||||
CONFIG_HAVE_ARCH_JUMP_LABEL=y
|
|
||||||
CONFIG_HAVE_ARCH_KGDB=y
|
|
||||||
CONFIG_HAVE_ARCH_PFN_VALID=y
|
|
||||||
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
|
|
||||||
CONFIG_HAVE_ARCH_TRACEHOOK=y
|
|
||||||
CONFIG_HAVE_ARM_SCU=y
|
|
||||||
CONFIG_HAVE_ARM_TWD=y
|
|
||||||
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
|
|
||||||
CONFIG_HAVE_BPF_JIT=y
|
|
||||||
CONFIG_HAVE_CLK=y
|
|
||||||
CONFIG_HAVE_CLK_PREPARE=y
|
|
||||||
CONFIG_HAVE_CONTEXT_TRACKING=y
|
|
||||||
CONFIG_HAVE_C_RECORDMCOUNT=y
|
|
||||||
CONFIG_HAVE_DEBUG_KMEMLEAK=y
|
|
||||||
CONFIG_HAVE_DMA_API_DEBUG=y
|
|
||||||
CONFIG_HAVE_DMA_ATTRS=y
|
|
||||||
CONFIG_HAVE_DMA_CONTIGUOUS=y
|
|
||||||
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
|
||||||
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
|
||||||
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
|
||||||
CONFIG_HAVE_FUNCTION_TRACER=y
|
|
||||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
|
||||||
CONFIG_HAVE_HW_BREAKPOINT=y
|
|
||||||
CONFIG_HAVE_IDE=y
|
|
||||||
CONFIG_HAVE_IMX_ANATOP=y
|
|
||||||
CONFIG_HAVE_IMX_GPC=y
|
|
||||||
CONFIG_HAVE_IMX_MMDC=y
|
|
||||||
CONFIG_HAVE_IMX_SRC=y
|
|
||||||
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
|
|
||||||
CONFIG_HAVE_KERNEL_GZIP=y
|
|
||||||
CONFIG_HAVE_KERNEL_LZ4=y
|
|
||||||
CONFIG_HAVE_KERNEL_LZMA=y
|
|
||||||
CONFIG_HAVE_KERNEL_LZO=y
|
|
||||||
CONFIG_HAVE_KERNEL_XZ=y
|
|
||||||
CONFIG_HAVE_MEMBLOCK=y
|
|
||||||
CONFIG_HAVE_NET_DSA=y
|
|
||||||
CONFIG_HAVE_OPROFILE=y
|
|
||||||
CONFIG_HAVE_PERF_EVENTS=y
|
|
||||||
CONFIG_HAVE_PROC_CPU=y
|
|
||||||
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
|
|
||||||
CONFIG_HAVE_SMP=y
|
|
||||||
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
|
|
||||||
CONFIG_HAVE_UID16=y
|
|
||||||
CONFIG_HZ_FIXED=0
|
|
||||||
CONFIG_I2C=y
|
|
||||||
CONFIG_I2C_BOARDINFO=y
|
|
||||||
CONFIG_I2C_CHARDEV=y
|
|
||||||
CONFIG_I2C_IMX=y
|
|
||||||
# CONFIG_IMX2_WDT is not set
|
|
||||||
CONFIG_IMX_DMA=y
|
|
||||||
CONFIG_IMX_SDMA=y
|
|
||||||
# CONFIG_IMX_WEIM is not set
|
|
||||||
CONFIG_INITRAMFS_SOURCE=""
|
|
||||||
CONFIG_IRQCHIP=y
|
|
||||||
CONFIG_IRQ_DOMAIN=y
|
|
||||||
CONFIG_IRQ_FORCED_THREADING=y
|
|
||||||
CONFIG_IRQ_WORK=y
|
|
||||||
CONFIG_JBD=y
|
|
||||||
CONFIG_JBD2=y
|
|
||||||
CONFIG_KTIME_SCALAR=y
|
|
||||||
# CONFIG_LEDS_REGULATOR is not set
|
|
||||||
CONFIG_LZO_COMPRESS=y
|
|
||||||
CONFIG_LZO_DECOMPRESS=y
|
|
||||||
CONFIG_M25PXX_USE_FAST_READ=y
|
|
||||||
# CONFIG_MACH_EUKREA_CPUIMX51SD is not set
|
|
||||||
# CONFIG_MACH_IMX51_DT is not set
|
|
||||||
# CONFIG_MACH_MX51_BABBAGE is not set
|
|
||||||
CONFIG_MDIO_BOARDINFO=y
|
|
||||||
CONFIG_MFD_SYSCON=y
|
|
||||||
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
|
|
||||||
CONFIG_MIGHT_HAVE_PCI=y
|
|
||||||
CONFIG_MMC=y
|
|
||||||
CONFIG_MMC_BLOCK=y
|
|
||||||
# CONFIG_MMC_MXC is not set
|
|
||||||
CONFIG_MMC_SDHCI=y
|
|
||||||
CONFIG_MMC_SDHCI_ESDHC_IMX=y
|
|
||||||
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
|
|
||||||
# CONFIG_MMC_SDHCI_PCI is not set
|
|
||||||
CONFIG_MMC_SDHCI_PLTFM=y
|
|
||||||
# CONFIG_MMC_TIFM_SD is not set
|
|
||||||
CONFIG_MODULES_USE_ELF_REL=y
|
|
||||||
CONFIG_MTD_M25P80=y
|
|
||||||
CONFIG_MTD_NAND=y
|
|
||||||
CONFIG_MTD_NAND_ECC=y
|
|
||||||
CONFIG_MTD_NAND_GPMI_NAND=y
|
|
||||||
# CONFIG_MTD_PHYSMAP_OF is not set
|
|
||||||
# CONFIG_MTD_SM_COMMON is not set
|
|
||||||
CONFIG_MTD_UBI=y
|
|
||||||
CONFIG_MTD_UBI_BEB_LIMIT=20
|
|
||||||
# CONFIG_MTD_UBI_FASTMAP is not set
|
|
||||||
# CONFIG_MTD_UBI_GLUEBI is not set
|
|
||||||
CONFIG_MTD_UBI_WL_THRESHOLD=4096
|
|
||||||
CONFIG_MULTI_IRQ_HANDLER=y
|
|
||||||
CONFIG_MUTEX_SPIN_ON_OWNER=y
|
|
||||||
# CONFIG_MX3_IPU is not set
|
|
||||||
# CONFIG_MXC_DEBUG_BOARD is not set
|
|
||||||
# CONFIG_MXC_IRQ_PRIOR is not set
|
|
||||||
CONFIG_MXS_DMA=y
|
|
||||||
CONFIG_NEED_DMA_MAP_STATE=y
|
|
||||||
# CONFIG_NET_DMA is not set
|
|
||||||
CONFIG_NET_FLOW_LIMIT=y
|
|
||||||
CONFIG_NET_RX_BUSY_POLL=y
|
|
||||||
CONFIG_NLS=y
|
|
||||||
CONFIG_NLS_CODEPAGE_437=y
|
|
||||||
CONFIG_NO_HZ_COMMON=y
|
|
||||||
CONFIG_NO_HZ_IDLE=y
|
|
||||||
CONFIG_NR_CPUS=4
|
|
||||||
CONFIG_OF=y
|
|
||||||
CONFIG_OF_ADDRESS=y
|
|
||||||
CONFIG_OF_EARLY_FLATTREE=y
|
|
||||||
CONFIG_OF_FLATTREE=y
|
|
||||||
CONFIG_OF_GPIO=y
|
|
||||||
CONFIG_OF_IRQ=y
|
|
||||||
CONFIG_OF_MDIO=y
|
|
||||||
CONFIG_OF_MTD=y
|
|
||||||
CONFIG_OF_NET=y
|
|
||||||
CONFIG_OF_PCI=y
|
|
||||||
CONFIG_OF_PCI_IRQ=y
|
|
||||||
CONFIG_OLD_SIGACTION=y
|
|
||||||
CONFIG_OLD_SIGSUSPEND3=y
|
|
||||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
|
||||||
CONFIG_PAGE_OFFSET=0x80000000
|
|
||||||
CONFIG_PCI=y
|
|
||||||
CONFIG_PCIEAER=y
|
|
||||||
CONFIG_PCIEPORTBUS=y
|
|
||||||
CONFIG_PCIE_DW=y
|
|
||||||
CONFIG_PCI_DOMAINS=y
|
|
||||||
CONFIG_PCI_IMX6=y
|
|
||||||
CONFIG_PERF_EVENTS=y
|
|
||||||
CONFIG_PERF_USE_VMALLOC=y
|
|
||||||
CONFIG_PHYLIB=y
|
|
||||||
CONFIG_PINCTRL=y
|
|
||||||
CONFIG_PINCTRL_IMX=y
|
|
||||||
CONFIG_PINCTRL_IMX6Q=y
|
|
||||||
CONFIG_PINCTRL_IMX6SL=y
|
|
||||||
# CONFIG_PINCTRL_SINGLE is not set
|
|
||||||
CONFIG_PM_OPP=y
|
|
||||||
CONFIG_PPS=y
|
|
||||||
# CONFIG_PREEMPT_RCU is not set
|
|
||||||
CONFIG_PROC_DEVICETREE=y
|
|
||||||
CONFIG_PTP_1588_CLOCK=y
|
|
||||||
CONFIG_RATIONAL=y
|
|
||||||
CONFIG_RCU_STALL_COMMON=y
|
|
||||||
CONFIG_RD_BZIP2=y
|
|
||||||
CONFIG_RD_GZIP=y
|
|
||||||
CONFIG_RD_LZO=y
|
|
||||||
CONFIG_RD_XZ=y
|
|
||||||
CONFIG_REGMAP=y
|
|
||||||
CONFIG_REGMAP_I2C=y
|
|
||||||
CONFIG_REGMAP_MMIO=y
|
|
||||||
CONFIG_REGMAP_SPI=y
|
|
||||||
CONFIG_REGULATOR=y
|
|
||||||
CONFIG_REGULATOR_ANATOP=y
|
|
||||||
# CONFIG_REGULATOR_DEBUG is not set
|
|
||||||
# CONFIG_REGULATOR_DUMMY is not set
|
|
||||||
CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
|
||||||
CONFIG_REGULATOR_PFUZE100=y
|
|
||||||
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
|
|
||||||
# CONFIG_RFKILL_REGULATOR is not set
|
|
||||||
CONFIG_RFS_ACCEL=y
|
|
||||||
CONFIG_RPS=y
|
|
||||||
CONFIG_RTC_CLASS=y
|
|
||||||
# CONFIG_RTC_DRV_IMXDI is not set
|
|
||||||
# CONFIG_RTC_DRV_MXC is not set
|
|
||||||
CONFIG_SATA_AHCI_PLATFORM=y
|
|
||||||
CONFIG_SCHED_HRTICK=y
|
|
||||||
CONFIG_SCSI=y
|
|
||||||
CONFIG_SERIAL_IMX=y
|
|
||||||
CONFIG_SERIAL_IMX_CONSOLE=y
|
|
||||||
CONFIG_SMP=y
|
|
||||||
CONFIG_SMP_ON_UP=y
|
|
||||||
# CONFIG_SOC_IMX53 is not set
|
|
||||||
CONFIG_SOC_IMX6Q=y
|
|
||||||
CONFIG_SOC_IMX6SL=y
|
|
||||||
# CONFIG_SOC_VF610 is not set
|
|
||||||
CONFIG_SPARSE_IRQ=y
|
|
||||||
CONFIG_SPI=y
|
|
||||||
CONFIG_SPI_BITBANG=y
|
|
||||||
CONFIG_SPI_IMX=y
|
|
||||||
CONFIG_SPI_MASTER=y
|
|
||||||
CONFIG_STMP_DEVICE=y
|
|
||||||
CONFIG_STOP_MACHINE=y
|
|
||||||
# CONFIG_SWP_EMULATE is not set
|
|
||||||
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
|
||||||
# CONFIG_THUMB2_KERNEL is not set
|
|
||||||
CONFIG_TICK_CPU_ACCOUNTING=y
|
|
||||||
CONFIG_TREE_RCU=y
|
|
||||||
CONFIG_UBIFS_FS=y
|
|
||||||
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
|
|
||||||
CONFIG_UBIFS_FS_LZO=y
|
|
||||||
CONFIG_UBIFS_FS_XZ=y
|
|
||||||
CONFIG_UBIFS_FS_ZLIB=y
|
|
||||||
CONFIG_UID16=y
|
|
||||||
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
|
|
||||||
# CONFIG_USB_MXS_PHY is not set
|
|
||||||
CONFIG_USB_SUPPORT=y
|
|
||||||
CONFIG_USE_GENERIC_SMP_HELPERS=y
|
|
||||||
CONFIG_USE_OF=y
|
|
||||||
CONFIG_VECTORS_BASE=0xffff0000
|
|
||||||
# CONFIG_VFP is not set
|
|
||||||
CONFIG_VMSPLIT_2G=y
|
|
||||||
# CONFIG_VMSPLIT_3G is not set
|
|
||||||
# CONFIG_XEN is not set
|
|
||||||
CONFIG_XPS=y
|
|
||||||
CONFIG_XZ_DEC_ARM=y
|
|
||||||
CONFIG_XZ_DEC_BCJ=y
|
|
||||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
|
||||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
|
||||||
# CONFIG_ZBUD is not set
|
|
||||||
CONFIG_ZLIB_DEFLATE=y
|
|
||||||
CONFIG_ZLIB_INFLATE=y
|
|
||||||
CONFIG_ZONE_DMA_FLAG=0
|
|
||||||
|
|
@ -1,38 +0,0 @@
|
||||||
From 3a57291fa4ca7f7647d826f5b47082ef306d839f Mon Sep 17 00:00:00 2001
|
|
||||||
From: Sean Cross <xobs@kosagi.com>
|
|
||||||
Date: Thu, 26 Sep 2013 10:51:09 +0800
|
|
||||||
Subject: [PATCH] ARM: dts: imx6qdl: add pcie device node
|
|
||||||
|
|
||||||
Add pcie device node for imx6qdl.
|
|
||||||
|
|
||||||
Signed-off-by: Sean Cross <xobs@kosagi.com>
|
|
||||||
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
|
||||||
---
|
|
||||||
arch/arm/boot/dts/imx6qdl.dtsi | 16 ++++++++++++++++
|
|
||||||
1 file changed, 16 insertions(+)
|
|
||||||
|
|
||||||
--- a/arch/arm/boot/dts/imx6qdl.dtsi
|
|
||||||
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
|
|
||||||
@@ -116,6 +116,22 @@
|
|
||||||
arm,data-latency = <4 2 3>;
|
|
||||||
};
|
|
||||||
|
|
||||||
+ pcie: pcie@0x01000000 {
|
|
||||||
+ compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
|
|
||||||
+ reg = <0x01ffc000 0x4000>; /* DBI */
|
|
||||||
+ #address-cells = <3>;
|
|
||||||
+ #size-cells = <2>;
|
|
||||||
+ device_type = "pci";
|
|
||||||
+ ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000 /* configuration space */
|
|
||||||
+ 0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */
|
|
||||||
+ 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
|
|
||||||
+ num-lanes = <1>;
|
|
||||||
+ interrupts = <0 123 0x04>;
|
|
||||||
+ clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>;
|
|
||||||
+ clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
|
|
||||||
+ status = "disabled";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
pmu {
|
|
||||||
compatible = "arm,cortex-a9-pmu";
|
|
||||||
interrupts = <0 94 0x04>;
|
|
||||||
|
|
@ -1,60 +0,0 @@
|
||||||
From 64990a431469a58b2949aca5be9d69e220d53892 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Nicolin Chen <b42378@freescale.com>
|
|
||||||
Date: Fri, 23 Aug 2013 19:20:34 +0800
|
|
||||||
Subject: [PATCH] ARM: imx6q: Add pll4_audio_div to clock tree
|
|
||||||
|
|
||||||
There's a pll4_audio_div clock, an extra divider for pll4, missing
|
|
||||||
in current clock tree, thus add it.
|
|
||||||
|
|
||||||
Signed-off-by: Nicolin Chen <b42378@freescale.com>
|
|
||||||
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
|
||||||
---
|
|
||||||
arch/arm/mach-imx/clk-imx6q.c | 9 +++++----
|
|
||||||
2 files changed, 6 insertions(+), 4 deletions(-)
|
|
||||||
|
|
||||||
--- a/arch/arm/mach-imx/clk-imx6q.c
|
|
||||||
+++ b/arch/arm/mach-imx/clk-imx6q.c
|
|
||||||
@@ -182,7 +182,7 @@ static const char *periph2_clk2_sels[] =
|
|
||||||
static const char *periph_sels[] = { "periph_pre", "periph_clk2", };
|
|
||||||
static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
|
|
||||||
static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", };
|
|
||||||
-static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
|
|
||||||
+static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
|
|
||||||
static const char *gpu_axi_sels[] = { "axi", "ahb", };
|
|
||||||
static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
|
|
||||||
static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
|
|
||||||
@@ -196,7 +196,7 @@ static const char *ipu2_di0_sels[] = { "
|
|
||||||
static const char *ipu2_di1_sels[] = { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
|
|
||||||
static const char *hsi_tx_sels[] = { "pll3_120m", "pll2_pfd2_396m", };
|
|
||||||
static const char *pcie_axi_sels[] = { "axi", "ahb", };
|
|
||||||
-static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", };
|
|
||||||
+static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", };
|
|
||||||
static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
|
|
||||||
static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
|
|
||||||
static const char *emi_sels[] = { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", };
|
|
||||||
@@ -205,7 +205,7 @@ static const char *vdo_axi_sels[] = { "a
|
|
||||||
static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
|
|
||||||
static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
|
|
||||||
"dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
|
|
||||||
- "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_post_div", };
|
|
||||||
+ "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio_div", };
|
|
||||||
static const char *cko2_sels[] = {
|
|
||||||
"mmdc_ch0_axi", "mmdc_ch1_axi", "usdhc4", "usdhc1",
|
|
||||||
"gpu2d_axi", "dummy", "ecspi_root", "gpu3d_axi",
|
|
||||||
@@ -251,7 +251,7 @@ enum mx6q_clks {
|
|
||||||
ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
|
|
||||||
sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
|
|
||||||
usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow,
|
|
||||||
- spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, clk_max
|
|
||||||
+ spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, pll4_audio_div, clk_max
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct clk *clk[clk_max];
|
|
||||||
@@ -359,6 +359,7 @@ static void __init imx6q_clocks_init(str
|
|
||||||
clk[twd] = imx_clk_fixed_factor("twd", "arm", 1, 2);
|
|
||||||
|
|
||||||
clk[pll4_post_div] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
|
|
||||||
+ clk[pll4_audio_div] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
|
|
||||||
clk[pll5_post_div] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
|
|
||||||
clk[pll5_video_div] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
|
|
||||||
|
|
||||||
|
|
@ -1,52 +0,0 @@
|
||||||
From bfefdff8f91aa0a9ff1291d18d54498af276a6e5 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Shawn Guo <shawn.guo@linaro.org>
|
|
||||||
Date: Tue, 13 Aug 2013 13:54:02 +0800
|
|
||||||
Subject: [PATCH] ARM: imx: add soc revision helper functions
|
|
||||||
|
|
||||||
Similar to what we do for cpu type, the patch adds helper functions
|
|
||||||
imx_set_soc_revision() and imx_get_soc_revision() to maintain
|
|
||||||
imx_soc_revision in cpu.c.
|
|
||||||
|
|
||||||
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
|
||||||
---
|
|
||||||
arch/arm/mach-imx/common.h | 2 ++
|
|
||||||
arch/arm/mach-imx/cpu.c | 12 ++++++++++++
|
|
||||||
2 files changed, 14 insertions(+)
|
|
||||||
|
|
||||||
--- a/arch/arm/mach-imx/common.h
|
|
||||||
+++ b/arch/arm/mach-imx/common.h
|
|
||||||
@@ -81,6 +81,8 @@ extern int imx6q_revision(void);
|
|
||||||
extern int mx53_display_revision(void);
|
|
||||||
extern void imx_set_aips(void __iomem *);
|
|
||||||
extern int mxc_device_init(void);
|
|
||||||
+void imx_set_soc_revision(unsigned int rev);
|
|
||||||
+unsigned int imx_get_soc_revision(void);
|
|
||||||
|
|
||||||
enum mxc_cpu_pwr_mode {
|
|
||||||
WAIT_CLOCKED, /* wfi only */
|
|
||||||
--- a/arch/arm/mach-imx/cpu.c
|
|
||||||
+++ b/arch/arm/mach-imx/cpu.c
|
|
||||||
@@ -8,11 +8,23 @@
|
|
||||||
unsigned int __mxc_cpu_type;
|
|
||||||
EXPORT_SYMBOL(__mxc_cpu_type);
|
|
||||||
|
|
||||||
+static unsigned int imx_soc_revision;
|
|
||||||
+
|
|
||||||
void mxc_set_cpu_type(unsigned int type)
|
|
||||||
{
|
|
||||||
__mxc_cpu_type = type;
|
|
||||||
}
|
|
||||||
|
|
||||||
+void imx_set_soc_revision(unsigned int rev)
|
|
||||||
+{
|
|
||||||
+ imx_soc_revision = rev;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+unsigned int imx_get_soc_revision(void)
|
|
||||||
+{
|
|
||||||
+ return imx_soc_revision;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
void imx_print_silicon_rev(const char *cpu, int srev)
|
|
||||||
{
|
|
||||||
if (srev == IMX_CHIP_REVISION_UNKNOWN)
|
|
||||||
|
|
@ -1,93 +0,0 @@
|
||||||
From 3f75978b3742157853618c5c6dd4a5f49aa950b1 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Shawn Guo <shawn.guo@linaro.org>
|
|
||||||
Date: Tue, 13 Aug 2013 14:10:29 +0800
|
|
||||||
Subject: [PATCH] ARM: imx6q: use common soc revision helpers
|
|
||||||
|
|
||||||
It calls imx_set_soc_revision() to set up soc revision in
|
|
||||||
imx6q_init_revision(), and replaces all the occurrences of
|
|
||||||
imx6q_revision() with common helper imx_get_soc_revision().
|
|
||||||
|
|
||||||
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
|
||||||
---
|
|
||||||
arch/arm/mach-imx/clk-imx6q.c | 5 +++--
|
|
||||||
arch/arm/mach-imx/common.h | 1 -
|
|
||||||
arch/arm/mach-imx/mach-imx6q.c | 13 ++++---------
|
|
||||||
3 files changed, 7 insertions(+), 12 deletions(-)
|
|
||||||
|
|
||||||
--- a/arch/arm/mach-imx/clk-imx6q.c
|
|
||||||
+++ b/arch/arm/mach-imx/clk-imx6q.c
|
|
||||||
@@ -300,7 +300,7 @@ static void __init imx6q_clocks_init(str
|
|
||||||
WARN_ON(!base);
|
|
||||||
|
|
||||||
/* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */
|
|
||||||
- if (cpu_is_imx6q() && imx6q_revision() == IMX_CHIP_REVISION_1_0) {
|
|
||||||
+ if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_1_0) {
|
|
||||||
post_div_table[1].div = 1;
|
|
||||||
post_div_table[2].div = 1;
|
|
||||||
video_div_table[1].div = 1;
|
|
||||||
@@ -574,7 +574,8 @@ static void __init imx6q_clocks_init(str
|
|
||||||
clk_register_clkdev(clk[pll4_post_div], "pll4_post_div", NULL);
|
|
||||||
clk_register_clkdev(clk[pll4_audio], "pll4_audio", NULL);
|
|
||||||
|
|
||||||
- if ((imx6q_revision() != IMX_CHIP_REVISION_1_0) || cpu_is_imx6dl()) {
|
|
||||||
+ if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) ||
|
|
||||||
+ cpu_is_imx6dl()) {
|
|
||||||
clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]);
|
|
||||||
clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]);
|
|
||||||
}
|
|
||||||
--- a/arch/arm/mach-imx/common.h
|
|
||||||
+++ b/arch/arm/mach-imx/common.h
|
|
||||||
@@ -77,7 +77,6 @@ extern void mxc_restart(enum reboot_mode
|
|
||||||
extern void mxc_arch_reset_init(void __iomem *);
|
|
||||||
extern void mxc_arch_reset_init_dt(void);
|
|
||||||
extern int mx53_revision(void);
|
|
||||||
-extern int imx6q_revision(void);
|
|
||||||
extern int mx53_display_revision(void);
|
|
||||||
extern void imx_set_aips(void __iomem *);
|
|
||||||
extern int mxc_device_init(void);
|
|
||||||
--- a/arch/arm/mach-imx/mach-imx6q.c
|
|
||||||
+++ b/arch/arm/mach-imx/mach-imx6q.c
|
|
||||||
@@ -40,16 +40,10 @@
|
|
||||||
#include "cpuidle.h"
|
|
||||||
#include "hardware.h"
|
|
||||||
|
|
||||||
-static u32 chip_revision;
|
|
||||||
-
|
|
||||||
-int imx6q_revision(void)
|
|
||||||
-{
|
|
||||||
- return chip_revision;
|
|
||||||
-}
|
|
||||||
-
|
|
||||||
static void __init imx6q_init_revision(void)
|
|
||||||
{
|
|
||||||
u32 rev = imx_anatop_get_digprog();
|
|
||||||
+ u32 chip_revision;
|
|
||||||
|
|
||||||
switch (rev & 0xff) {
|
|
||||||
case 0:
|
|
||||||
@@ -66,6 +60,7 @@ static void __init imx6q_init_revision(v
|
|
||||||
}
|
|
||||||
|
|
||||||
mxc_set_cpu_type(rev >> 16 & 0xff);
|
|
||||||
+ imx_set_soc_revision(chip_revision);
|
|
||||||
}
|
|
||||||
|
|
||||||
static void imx6q_restart(enum reboot_mode mode, const char *cmd)
|
|
||||||
@@ -269,7 +264,7 @@ static void __init imx6q_init_late(void)
|
|
||||||
* WAIT mode is broken on TO 1.0 and 1.1, so there is no point
|
|
||||||
* to run cpuidle on them.
|
|
||||||
*/
|
|
||||||
- if (imx6q_revision() > IMX_CHIP_REVISION_1_1)
|
|
||||||
+ if (imx_get_soc_revision() > IMX_CHIP_REVISION_1_1)
|
|
||||||
imx6q_cpuidle_init();
|
|
||||||
|
|
||||||
if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) {
|
|
||||||
@@ -298,7 +293,7 @@ static void __init imx6q_timer_init(void
|
|
||||||
of_clk_init(NULL);
|
|
||||||
clocksource_of_init();
|
|
||||||
imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
|
|
||||||
- imx6q_revision());
|
|
||||||
+ imx_get_soc_revision());
|
|
||||||
}
|
|
||||||
|
|
||||||
static const char *imx6q_dt_compat[] __initdata = {
|
|
||||||
|
|
@ -1,58 +0,0 @@
|
||||||
From bf22172158cd6dcc5be6dc286ff5c33794dd0ae8 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Sean Cross <xobs@kosagi.com>
|
|
||||||
Date: Mon, 16 Sep 2013 08:20:52 +0000
|
|
||||||
Subject: [PATCH] ARM: imx: Add LVDS general-purpose clocks to i.MX6Q
|
|
||||||
|
|
||||||
The i.MX6 has two general-purpose LVDS clocks that can be driven
|
|
||||||
from a variety of sources. This patch adds a mux and a gate for
|
|
||||||
both of these clocks.
|
|
||||||
|
|
||||||
Signed-off-by: Sean Cross <xobs@kosagi.com>
|
|
||||||
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
|
||||||
---
|
|
||||||
arch/arm/mach-imx/clk-imx6q.c | 20 +++++++++++++++++++-
|
|
||||||
2 files changed, 23 insertions(+), 1 deletion(-)
|
|
||||||
|
|
||||||
--- a/arch/arm/mach-imx/clk-imx6q.c
|
|
||||||
+++ b/arch/arm/mach-imx/clk-imx6q.c
|
|
||||||
@@ -217,6 +217,11 @@ static const char *cko2_sels[] = {
|
|
||||||
"uart_serial", "spdif", "asrc", "hsi_tx",
|
|
||||||
};
|
|
||||||
static const char *cko_sels[] = { "cko1", "cko2", };
|
|
||||||
+static const char *lvds_sels[] = {
|
|
||||||
+ "dummy", "dummy", "dummy", "dummy", "dummy", "dummy",
|
|
||||||
+ "pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
|
|
||||||
+ "pcie_ref", "sata_ref",
|
|
||||||
+};
|
|
||||||
|
|
||||||
enum mx6q_clks {
|
|
||||||
dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
|
|
||||||
@@ -251,7 +256,8 @@ enum mx6q_clks {
|
|
||||||
ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
|
|
||||||
sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
|
|
||||||
usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow,
|
|
||||||
- spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, pll4_audio_div, clk_max
|
|
||||||
+ spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, pll4_audio_div,
|
|
||||||
+ lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, clk_max
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct clk *clk[clk_max];
|
|
||||||
@@ -342,6 +348,18 @@ static void __init imx6q_clocks_init(str
|
|
||||||
base + 0xe0, 0, 2, 0, clk_enet_ref_table,
|
|
||||||
&imx_ccm_lock);
|
|
||||||
|
|
||||||
+ clk[lvds1_sel] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
|
|
||||||
+ clk[lvds2_sel] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
|
|
||||||
+
|
|
||||||
+ /*
|
|
||||||
+ * lvds1_gate and lvds2_gate are pseudo-gates. Both can be
|
|
||||||
+ * independently configured as clock inputs or outputs. We treat
|
|
||||||
+ * the "output_enable" bit as a gate, even though it's really just
|
|
||||||
+ * enabling clock output.
|
|
||||||
+ */
|
|
||||||
+ clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "dummy", base + 0x160, 10);
|
|
||||||
+ clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "dummy", base + 0x160, 11);
|
|
||||||
+
|
|
||||||
/* name parent_name reg idx */
|
|
||||||
clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
|
|
||||||
clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);
|
|
||||||
|
|
@ -1,38 +0,0 @@
|
||||||
From 74b8031307c5d33d36742c26dd0921991bd5a255 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Sean Cross <xobs@kosagi.com>
|
|
||||||
Date: Thu, 26 Sep 2013 10:45:35 +0800
|
|
||||||
Subject: [PATCH] ARM: imx6q: clock and Kconfig update for PCIe support
|
|
||||||
|
|
||||||
Update imx6q clock initialization and Kconfig for PCIe support.
|
|
||||||
|
|
||||||
Signed-off-by: Sean Cross <xobs@kosagi.com>
|
|
||||||
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
|
||||||
---
|
|
||||||
arch/arm/mach-imx/Kconfig | 2 ++
|
|
||||||
arch/arm/mach-imx/clk-imx6q.c | 4 ++++
|
|
||||||
2 files changed, 6 insertions(+)
|
|
||||||
|
|
||||||
--- a/arch/arm/mach-imx/Kconfig
|
|
||||||
+++ b/arch/arm/mach-imx/Kconfig
|
|
||||||
@@ -801,6 +801,8 @@ config SOC_IMX6Q
|
|
||||||
select HAVE_IMX_SRC
|
|
||||||
select HAVE_SMP
|
|
||||||
select MFD_SYSCON
|
|
||||||
+ select MIGHT_HAVE_PCI
|
|
||||||
+ select PCI_DOMAINS if PCI
|
|
||||||
select PINCTRL
|
|
||||||
select PINCTRL_IMX6Q
|
|
||||||
select PL310_ERRATA_588369 if CACHE_PL310
|
|
||||||
--- a/arch/arm/mach-imx/clk-imx6q.c
|
|
||||||
+++ b/arch/arm/mach-imx/clk-imx6q.c
|
|
||||||
@@ -623,6 +623,10 @@ static void __init imx6q_clocks_init(str
|
|
||||||
if (ret)
|
|
||||||
pr_warn("failed to set up CLKO: %d\n", ret);
|
|
||||||
|
|
||||||
+ /* All existing boards with PCIe use LVDS1 */
|
|
||||||
+ if (IS_ENABLED(CONFIG_PCI_IMX6))
|
|
||||||
+ clk_set_parent(clk[lvds1_sel], clk[sata_ref]);
|
|
||||||
+
|
|
||||||
/* Set initial power mode */
|
|
||||||
imx6q_set_lpm(WAIT_CLOCKED);
|
|
||||||
|
|
||||||
|
|
@ -1,115 +0,0 @@
|
||||||
From 3f7fbfad3edc92227b9ae91050837a6d1de374f5 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Tim Harvey <tharvey@gateworks.com>
|
|
||||||
Date: Tue, 22 Oct 2013 21:51:25 -0700
|
|
||||||
Subject: [PATCH] ARM: dts: added several new imx-pinmux groups
|
|
||||||
|
|
||||||
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
|
|
||||||
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
|
||||||
---
|
|
||||||
arch/arm/boot/dts/imx6qdl.dtsi | 60 ++++++++++++++++++++++++++++++++++++++++++
|
|
||||||
1 file changed, 60 insertions(+)
|
|
||||||
|
|
||||||
--- a/arch/arm/boot/dts/imx6qdl.dtsi
|
|
||||||
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
|
|
||||||
@@ -622,6 +622,14 @@
|
|
||||||
MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x80000000
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
+
|
|
||||||
+ pinctrl_audmux_4: audmux-4 {
|
|
||||||
+ fsl,pins = <
|
|
||||||
+ MX6QDL_PAD_EIM_D24__AUD5_RXFS 0x80000000
|
|
||||||
+ MX6QDL_PAD_EIM_D25__AUD5_RXC 0x80000000
|
|
||||||
+ MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x80000000
|
|
||||||
+ >;
|
|
||||||
+ };
|
|
||||||
};
|
|
||||||
|
|
||||||
ecspi1 {
|
|
||||||
@@ -794,6 +802,28 @@
|
|
||||||
MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
+
|
|
||||||
+ /* No Strobe */
|
|
||||||
+ pinctrl_gpmi_nand_2: gpmi-nand-2 {
|
|
||||||
+ fsl,pins = <
|
|
||||||
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
|
|
||||||
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
|
|
||||||
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
|
|
||||||
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
|
|
||||||
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
|
|
||||||
+ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
|
|
||||||
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
|
|
||||||
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
|
|
||||||
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
|
|
||||||
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
|
|
||||||
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
|
|
||||||
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
|
|
||||||
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
|
|
||||||
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
|
|
||||||
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
|
|
||||||
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
|
|
||||||
+ >;
|
|
||||||
+ };
|
|
||||||
};
|
|
||||||
|
|
||||||
hdmi_hdcp {
|
|
||||||
@@ -1035,6 +1065,13 @@
|
|
||||||
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
+
|
|
||||||
+ pinctrl_uart1_2: uart1grp-2 {
|
|
||||||
+ fsl,pins = <
|
|
||||||
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
|
|
||||||
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
|
|
||||||
+ >;
|
|
||||||
+ };
|
|
||||||
};
|
|
||||||
|
|
||||||
uart2 {
|
|
||||||
@@ -1053,6 +1090,13 @@
|
|
||||||
MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
+
|
|
||||||
+ pinctrl_uart2_3: uart2grp-3 {
|
|
||||||
+ fsl,pins = <
|
|
||||||
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
|
|
||||||
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
|
|
||||||
+ >;
|
|
||||||
+ };
|
|
||||||
};
|
|
||||||
|
|
||||||
uart3 {
|
|
||||||
@@ -1073,6 +1117,13 @@
|
|
||||||
MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
+
|
|
||||||
+ pinctrl_uart3_3: uart3grp-3 {
|
|
||||||
+ fsl,pins = <
|
|
||||||
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
|
|
||||||
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
|
|
||||||
+ >;
|
|
||||||
+ };
|
|
||||||
};
|
|
||||||
|
|
||||||
uart4 {
|
|
||||||
@@ -1083,6 +1134,15 @@
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
+
|
|
||||||
+ uart5 {
|
|
||||||
+ pinctrl_uart5_1: uart5grp-1 {
|
|
||||||
+ fsl,pins = <
|
|
||||||
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
|
|
||||||
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
|
|
||||||
+ >;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
|
|
||||||
usbotg {
|
|
||||||
pinctrl_usbotg_1: usbotggrp-1 {
|
|
||||||
File diff suppressed because it is too large
Load Diff
|
|
@ -1,60 +0,0 @@
|
||||||
From 079441036b20d9f3d23d1e96f0681b99349de05a Mon Sep 17 00:00:00 2001
|
|
||||||
From: Tim Harvey <tharvey@gateworks.com>
|
|
||||||
Date: Tue, 22 Oct 2013 21:51:28 -0700
|
|
||||||
Subject: [PATCH] imx: add PCI fixup for PEX860X on Gateworks board
|
|
||||||
|
|
||||||
The PEX860X has GPIO's which are used for PCI Reset lines on the
|
|
||||||
Gateworks Ventana boards. The GPIO's need to be set as output
|
|
||||||
level high so as to allow the PCIe devices to come out of reset.
|
|
||||||
|
|
||||||
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
|
|
||||||
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
|
||||||
---
|
|
||||||
arch/arm/mach-imx/mach-imx6q.c | 30 ++++++++++++++++++++++++++++++
|
|
||||||
1 file changed, 30 insertions(+)
|
|
||||||
|
|
||||||
--- a/arch/arm/mach-imx/mach-imx6q.c
|
|
||||||
+++ b/arch/arm/mach-imx/mach-imx6q.c
|
|
||||||
@@ -26,6 +26,7 @@
|
|
||||||
#include <linux/of_irq.h>
|
|
||||||
#include <linux/of_platform.h>
|
|
||||||
#include <linux/opp.h>
|
|
||||||
+#include <linux/pci.h>
|
|
||||||
#include <linux/phy.h>
|
|
||||||
#include <linux/reboot.h>
|
|
||||||
#include <linux/regmap.h>
|
|
||||||
@@ -134,6 +135,34 @@ static int ksz9031rn_phy_fixup(struct ph
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
+/*
|
|
||||||
+ * fixup for PLX PEX8909 bridge to configure GPIO1-7 as output High
|
|
||||||
+ * as they are used for slots1-7 PERST#
|
|
||||||
+ */
|
|
||||||
+static void ventana_pciesw_early_fixup(struct pci_dev *dev)
|
|
||||||
+{
|
|
||||||
+ u32 dw;
|
|
||||||
+
|
|
||||||
+ if (!of_machine_is_compatible("gw,ventana"))
|
|
||||||
+ return;
|
|
||||||
+
|
|
||||||
+ if (dev->devfn != 0)
|
|
||||||
+ return;
|
|
||||||
+
|
|
||||||
+ pci_read_config_dword(dev, 0x62c, &dw);
|
|
||||||
+ dw |= 0xaaa8; // GPIO1-7 outputs
|
|
||||||
+ pci_write_config_dword(dev, 0x62c, dw);
|
|
||||||
+
|
|
||||||
+ pci_read_config_dword(dev, 0x644, &dw);
|
|
||||||
+ dw |= 0xfe; // GPIO1-7 output high
|
|
||||||
+ pci_write_config_dword(dev, 0x644, dw);
|
|
||||||
+
|
|
||||||
+ msleep(100);
|
|
||||||
+}
|
|
||||||
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609, ventana_pciesw_early_fixup);
|
|
||||||
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8606, ventana_pciesw_early_fixup);
|
|
||||||
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8604, ventana_pciesw_early_fixup);
|
|
||||||
+
|
|
||||||
static int ar8031_phy_fixup(struct phy_device *dev)
|
|
||||||
{
|
|
||||||
u16 val;
|
|
||||||
|
|
@ -1,39 +0,0 @@
|
||||||
From 8d6a35fb13406f87d926fffeee0d70360ce3077d Mon Sep 17 00:00:00 2001
|
|
||||||
From: Sean Cross <xobs@kosagi.com>
|
|
||||||
Date: Thu, 26 Sep 2013 11:24:46 +0800
|
|
||||||
Subject: [PATCH] ARM: imx6q: Add PCIe bits to GPR syscon definition
|
|
||||||
|
|
||||||
PCIe requires additional bits be defined for GPR8 and GPR12.
|
|
||||||
|
|
||||||
Signed-off-by: Sean Cross <xobs@kosagi.com>
|
|
||||||
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
|
||||||
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
||||||
---
|
|
||||||
include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 8 ++++++++
|
|
||||||
1 file changed, 8 insertions(+)
|
|
||||||
|
|
||||||
--- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
|
|
||||||
+++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
|
|
||||||
@@ -241,6 +241,12 @@
|
|
||||||
|
|
||||||
#define IMX6Q_GPR5_L2_CLK_STOP BIT(8)
|
|
||||||
|
|
||||||
+#define IMX6Q_GPR8_TX_SWING_LOW (0x7f << 25)
|
|
||||||
+#define IMX6Q_GPR8_TX_SWING_FULL (0x7f << 18)
|
|
||||||
+#define IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB (0x3f << 12)
|
|
||||||
+#define IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB (0x3f << 6)
|
|
||||||
+#define IMX6Q_GPR8_TX_DEEMPH_GEN1 (0x3f << 0)
|
|
||||||
+
|
|
||||||
#define IMX6Q_GPR9_TZASC2_BYP BIT(1)
|
|
||||||
#define IMX6Q_GPR9_TZASC1_BYP BIT(0)
|
|
||||||
|
|
||||||
@@ -273,7 +279,9 @@
|
|
||||||
#define IMX6Q_GPR12_ARMP_AHB_CLK_EN BIT(26)
|
|
||||||
#define IMX6Q_GPR12_ARMP_ATB_CLK_EN BIT(25)
|
|
||||||
#define IMX6Q_GPR12_ARMP_APB_CLK_EN BIT(24)
|
|
||||||
+#define IMX6Q_GPR12_DEVICE_TYPE (0xf << 12)
|
|
||||||
#define IMX6Q_GPR12_PCIE_CTL_2 BIT(10)
|
|
||||||
+#define IMX6Q_GPR12_LOS_LEVEL (0x1f << 4)
|
|
||||||
|
|
||||||
#define IMX6Q_GPR13_SDMA_STOP_REQ BIT(30)
|
|
||||||
#define IMX6Q_GPR13_CAN2_STOP_REQ BIT(29)
|
|
||||||
|
|
@ -1,620 +0,0 @@
|
||||||
From bb38919ec56e0758c3ae56dfc091dcde1391353e Mon Sep 17 00:00:00 2001
|
|
||||||
From: Sean Cross <xobs@kosagi.com>
|
|
||||||
Date: Thu, 26 Sep 2013 11:24:47 +0800
|
|
||||||
Subject: [PATCH] PCI: imx6: Add support for i.MX6 PCIe controller
|
|
||||||
|
|
||||||
Add support for the PCIe port present on the i.MX6 family of controllers.
|
|
||||||
These use the Synopsis Designware core tied to their own PHY.
|
|
||||||
|
|
||||||
Signed-off-by: Sean Cross <xobs@kosagi.com>
|
|
||||||
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
|
||||||
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
||||||
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
||||||
---
|
|
||||||
drivers/pci/host/Kconfig | 6 +
|
|
||||||
drivers/pci/host/Makefile | 1 +
|
|
||||||
drivers/pci/host/pci-imx6.c | 575 +++++++++++++++++++++
|
|
||||||
4 files changed, 588 insertions(+), 1 deletion(-)
|
|
||||||
create mode 100644 drivers/pci/host/pci-imx6.c
|
|
||||||
|
|
||||||
--- a/drivers/pci/host/Kconfig
|
|
||||||
+++ b/drivers/pci/host/Kconfig
|
|
||||||
@@ -15,6 +15,12 @@ config PCI_EXYNOS
|
|
||||||
select PCIEPORTBUS
|
|
||||||
select PCIE_DW
|
|
||||||
|
|
||||||
+config PCI_IMX6
|
|
||||||
+ bool "Freescale i.MX6 PCIe controller"
|
|
||||||
+ depends on SOC_IMX6Q
|
|
||||||
+ select PCIEPORTBUS
|
|
||||||
+ select PCIE_DW
|
|
||||||
+
|
|
||||||
config PCI_TEGRA
|
|
||||||
bool "NVIDIA Tegra PCIe controller"
|
|
||||||
depends on ARCH_TEGRA
|
|
||||||
--- a/drivers/pci/host/Makefile
|
|
||||||
+++ b/drivers/pci/host/Makefile
|
|
||||||
@@ -1,4 +1,5 @@
|
|
||||||
obj-$(CONFIG_PCIE_DW) += pcie-designware.o
|
|
||||||
obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
|
|
||||||
+obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
|
|
||||||
obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
|
|
||||||
obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/drivers/pci/host/pci-imx6.c
|
|
||||||
@@ -0,0 +1,575 @@
|
|
||||||
+/*
|
|
||||||
+ * PCIe host controller driver for Freescale i.MX6 SoCs
|
|
||||||
+ *
|
|
||||||
+ * Copyright (C) 2013 Kosagi
|
|
||||||
+ * http://www.kosagi.com
|
|
||||||
+ *
|
|
||||||
+ * Author: Sean Cross <xobs@kosagi.com>
|
|
||||||
+ *
|
|
||||||
+ * This program is free software; you can redistribute it and/or modify
|
|
||||||
+ * it under the terms of the GNU General Public License version 2 as
|
|
||||||
+ * published by the Free Software Foundation.
|
|
||||||
+ */
|
|
||||||
+
|
|
||||||
+#include <linux/clk.h>
|
|
||||||
+#include <linux/delay.h>
|
|
||||||
+#include <linux/gpio.h>
|
|
||||||
+#include <linux/kernel.h>
|
|
||||||
+#include <linux/mfd/syscon.h>
|
|
||||||
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
|
|
||||||
+#include <linux/module.h>
|
|
||||||
+#include <linux/of_gpio.h>
|
|
||||||
+#include <linux/pci.h>
|
|
||||||
+#include <linux/platform_device.h>
|
|
||||||
+#include <linux/regmap.h>
|
|
||||||
+#include <linux/resource.h>
|
|
||||||
+#include <linux/signal.h>
|
|
||||||
+#include <linux/types.h>
|
|
||||||
+
|
|
||||||
+#include "pcie-designware.h"
|
|
||||||
+
|
|
||||||
+#define to_imx6_pcie(x) container_of(x, struct imx6_pcie, pp)
|
|
||||||
+
|
|
||||||
+struct imx6_pcie {
|
|
||||||
+ int reset_gpio;
|
|
||||||
+ int power_on_gpio;
|
|
||||||
+ int wake_up_gpio;
|
|
||||||
+ int disable_gpio;
|
|
||||||
+ struct clk *lvds_gate;
|
|
||||||
+ struct clk *sata_ref_100m;
|
|
||||||
+ struct clk *pcie_ref_125m;
|
|
||||||
+ struct clk *pcie_axi;
|
|
||||||
+ struct pcie_port pp;
|
|
||||||
+ struct regmap *iomuxc_gpr;
|
|
||||||
+ void __iomem *mem_base;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+/* PCIe Port Logic registers (memory-mapped) */
|
|
||||||
+#define PL_OFFSET 0x700
|
|
||||||
+#define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
|
|
||||||
+#define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
|
|
||||||
+
|
|
||||||
+#define PCIE_PHY_CTRL (PL_OFFSET + 0x114)
|
|
||||||
+#define PCIE_PHY_CTRL_DATA_LOC 0
|
|
||||||
+#define PCIE_PHY_CTRL_CAP_ADR_LOC 16
|
|
||||||
+#define PCIE_PHY_CTRL_CAP_DAT_LOC 17
|
|
||||||
+#define PCIE_PHY_CTRL_WR_LOC 18
|
|
||||||
+#define PCIE_PHY_CTRL_RD_LOC 19
|
|
||||||
+
|
|
||||||
+#define PCIE_PHY_STAT (PL_OFFSET + 0x110)
|
|
||||||
+#define PCIE_PHY_STAT_ACK_LOC 16
|
|
||||||
+
|
|
||||||
+/* PHY registers (not memory-mapped) */
|
|
||||||
+#define PCIE_PHY_RX_ASIC_OUT 0x100D
|
|
||||||
+
|
|
||||||
+#define PHY_RX_OVRD_IN_LO 0x1005
|
|
||||||
+#define PHY_RX_OVRD_IN_LO_RX_DATA_EN (1 << 5)
|
|
||||||
+#define PHY_RX_OVRD_IN_LO_RX_PLL_EN (1 << 3)
|
|
||||||
+
|
|
||||||
+static int pcie_phy_poll_ack(void __iomem *dbi_base, int exp_val)
|
|
||||||
+{
|
|
||||||
+ u32 val;
|
|
||||||
+ u32 max_iterations = 10;
|
|
||||||
+ u32 wait_counter = 0;
|
|
||||||
+
|
|
||||||
+ do {
|
|
||||||
+ val = readl(dbi_base + PCIE_PHY_STAT);
|
|
||||||
+ val = (val >> PCIE_PHY_STAT_ACK_LOC) & 0x1;
|
|
||||||
+ wait_counter++;
|
|
||||||
+
|
|
||||||
+ if (val == exp_val)
|
|
||||||
+ return 0;
|
|
||||||
+
|
|
||||||
+ udelay(1);
|
|
||||||
+ } while (wait_counter < max_iterations);
|
|
||||||
+
|
|
||||||
+ return -ETIMEDOUT;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int pcie_phy_wait_ack(void __iomem *dbi_base, int addr)
|
|
||||||
+{
|
|
||||||
+ u32 val;
|
|
||||||
+ int ret;
|
|
||||||
+
|
|
||||||
+ val = addr << PCIE_PHY_CTRL_DATA_LOC;
|
|
||||||
+ writel(val, dbi_base + PCIE_PHY_CTRL);
|
|
||||||
+
|
|
||||||
+ val |= (0x1 << PCIE_PHY_CTRL_CAP_ADR_LOC);
|
|
||||||
+ writel(val, dbi_base + PCIE_PHY_CTRL);
|
|
||||||
+
|
|
||||||
+ ret = pcie_phy_poll_ack(dbi_base, 1);
|
|
||||||
+ if (ret)
|
|
||||||
+ return ret;
|
|
||||||
+
|
|
||||||
+ val = addr << PCIE_PHY_CTRL_DATA_LOC;
|
|
||||||
+ writel(val, dbi_base + PCIE_PHY_CTRL);
|
|
||||||
+
|
|
||||||
+ ret = pcie_phy_poll_ack(dbi_base, 0);
|
|
||||||
+ if (ret)
|
|
||||||
+ return ret;
|
|
||||||
+
|
|
||||||
+ return 0;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+/* Read from the 16-bit PCIe PHY control registers (not memory-mapped) */
|
|
||||||
+static int pcie_phy_read(void __iomem *dbi_base, int addr , int *data)
|
|
||||||
+{
|
|
||||||
+ u32 val, phy_ctl;
|
|
||||||
+ int ret;
|
|
||||||
+
|
|
||||||
+ ret = pcie_phy_wait_ack(dbi_base, addr);
|
|
||||||
+ if (ret)
|
|
||||||
+ return ret;
|
|
||||||
+
|
|
||||||
+ /* assert Read signal */
|
|
||||||
+ phy_ctl = 0x1 << PCIE_PHY_CTRL_RD_LOC;
|
|
||||||
+ writel(phy_ctl, dbi_base + PCIE_PHY_CTRL);
|
|
||||||
+
|
|
||||||
+ ret = pcie_phy_poll_ack(dbi_base, 1);
|
|
||||||
+ if (ret)
|
|
||||||
+ return ret;
|
|
||||||
+
|
|
||||||
+ val = readl(dbi_base + PCIE_PHY_STAT);
|
|
||||||
+ *data = val & 0xffff;
|
|
||||||
+
|
|
||||||
+ /* deassert Read signal */
|
|
||||||
+ writel(0x00, dbi_base + PCIE_PHY_CTRL);
|
|
||||||
+
|
|
||||||
+ ret = pcie_phy_poll_ack(dbi_base, 0);
|
|
||||||
+ if (ret)
|
|
||||||
+ return ret;
|
|
||||||
+
|
|
||||||
+ return 0;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int pcie_phy_write(void __iomem *dbi_base, int addr, int data)
|
|
||||||
+{
|
|
||||||
+ u32 var;
|
|
||||||
+ int ret;
|
|
||||||
+
|
|
||||||
+ /* write addr */
|
|
||||||
+ /* cap addr */
|
|
||||||
+ ret = pcie_phy_wait_ack(dbi_base, addr);
|
|
||||||
+ if (ret)
|
|
||||||
+ return ret;
|
|
||||||
+
|
|
||||||
+ var = data << PCIE_PHY_CTRL_DATA_LOC;
|
|
||||||
+ writel(var, dbi_base + PCIE_PHY_CTRL);
|
|
||||||
+
|
|
||||||
+ /* capture data */
|
|
||||||
+ var |= (0x1 << PCIE_PHY_CTRL_CAP_DAT_LOC);
|
|
||||||
+ writel(var, dbi_base + PCIE_PHY_CTRL);
|
|
||||||
+
|
|
||||||
+ ret = pcie_phy_poll_ack(dbi_base, 1);
|
|
||||||
+ if (ret)
|
|
||||||
+ return ret;
|
|
||||||
+
|
|
||||||
+ /* deassert cap data */
|
|
||||||
+ var = data << PCIE_PHY_CTRL_DATA_LOC;
|
|
||||||
+ writel(var, dbi_base + PCIE_PHY_CTRL);
|
|
||||||
+
|
|
||||||
+ /* wait for ack de-assertion */
|
|
||||||
+ ret = pcie_phy_poll_ack(dbi_base, 0);
|
|
||||||
+ if (ret)
|
|
||||||
+ return ret;
|
|
||||||
+
|
|
||||||
+ /* assert wr signal */
|
|
||||||
+ var = 0x1 << PCIE_PHY_CTRL_WR_LOC;
|
|
||||||
+ writel(var, dbi_base + PCIE_PHY_CTRL);
|
|
||||||
+
|
|
||||||
+ /* wait for ack */
|
|
||||||
+ ret = pcie_phy_poll_ack(dbi_base, 1);
|
|
||||||
+ if (ret)
|
|
||||||
+ return ret;
|
|
||||||
+
|
|
||||||
+ /* deassert wr signal */
|
|
||||||
+ var = data << PCIE_PHY_CTRL_DATA_LOC;
|
|
||||||
+ writel(var, dbi_base + PCIE_PHY_CTRL);
|
|
||||||
+
|
|
||||||
+ /* wait for ack de-assertion */
|
|
||||||
+ ret = pcie_phy_poll_ack(dbi_base, 0);
|
|
||||||
+ if (ret)
|
|
||||||
+ return ret;
|
|
||||||
+
|
|
||||||
+ writel(0x0, dbi_base + PCIE_PHY_CTRL);
|
|
||||||
+
|
|
||||||
+ return 0;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+/* Added for PCI abort handling */
|
|
||||||
+static int imx6q_pcie_abort_handler(unsigned long addr,
|
|
||||||
+ unsigned int fsr, struct pt_regs *regs)
|
|
||||||
+{
|
|
||||||
+ /*
|
|
||||||
+ * If it was an imprecise abort, then we need to correct the
|
|
||||||
+ * return address to be _after_ the instruction.
|
|
||||||
+ */
|
|
||||||
+ if (fsr & (1 << 10))
|
|
||||||
+ regs->ARM_pc += 4;
|
|
||||||
+ return 0;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int imx6_pcie_assert_core_reset(struct pcie_port *pp)
|
|
||||||
+{
|
|
||||||
+ struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
|
|
||||||
+
|
|
||||||
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
||||||
+ IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18);
|
|
||||||
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
||||||
+ IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
|
|
||||||
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
||||||
+ IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16);
|
|
||||||
+
|
|
||||||
+ gpio_set_value(imx6_pcie->reset_gpio, 0);
|
|
||||||
+ msleep(100);
|
|
||||||
+ gpio_set_value(imx6_pcie->reset_gpio, 1);
|
|
||||||
+
|
|
||||||
+ return 0;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int imx6_pcie_deassert_core_reset(struct pcie_port *pp)
|
|
||||||
+{
|
|
||||||
+ struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
|
|
||||||
+ int ret;
|
|
||||||
+
|
|
||||||
+ if (gpio_is_valid(imx6_pcie->power_on_gpio))
|
|
||||||
+ gpio_set_value(imx6_pcie->power_on_gpio, 1);
|
|
||||||
+
|
|
||||||
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
||||||
+ IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
|
|
||||||
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
||||||
+ IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
|
|
||||||
+
|
|
||||||
+ ret = clk_prepare_enable(imx6_pcie->sata_ref_100m);
|
|
||||||
+ if (ret) {
|
|
||||||
+ dev_err(pp->dev, "unable to enable sata_ref_100m\n");
|
|
||||||
+ goto err_sata_ref;
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ ret = clk_prepare_enable(imx6_pcie->pcie_ref_125m);
|
|
||||||
+ if (ret) {
|
|
||||||
+ dev_err(pp->dev, "unable to enable pcie_ref_125m\n");
|
|
||||||
+ goto err_pcie_ref;
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ ret = clk_prepare_enable(imx6_pcie->lvds_gate);
|
|
||||||
+ if (ret) {
|
|
||||||
+ dev_err(pp->dev, "unable to enable lvds_gate\n");
|
|
||||||
+ goto err_lvds_gate;
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ ret = clk_prepare_enable(imx6_pcie->pcie_axi);
|
|
||||||
+ if (ret) {
|
|
||||||
+ dev_err(pp->dev, "unable to enable pcie_axi\n");
|
|
||||||
+ goto err_pcie_axi;
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ /* allow the clocks to stabilize */
|
|
||||||
+ usleep_range(200, 500);
|
|
||||||
+
|
|
||||||
+ return 0;
|
|
||||||
+
|
|
||||||
+err_pcie_axi:
|
|
||||||
+ clk_disable_unprepare(imx6_pcie->lvds_gate);
|
|
||||||
+err_lvds_gate:
|
|
||||||
+ clk_disable_unprepare(imx6_pcie->pcie_ref_125m);
|
|
||||||
+err_pcie_ref:
|
|
||||||
+ clk_disable_unprepare(imx6_pcie->sata_ref_100m);
|
|
||||||
+err_sata_ref:
|
|
||||||
+ return ret;
|
|
||||||
+
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static void imx6_pcie_init_phy(struct pcie_port *pp)
|
|
||||||
+{
|
|
||||||
+ struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
|
|
||||||
+
|
|
||||||
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
||||||
+ IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
|
|
||||||
+
|
|
||||||
+ /* configure constant input signal to the pcie ctrl and phy */
|
|
||||||
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
||||||
+ IMX6Q_GPR12_DEVICE_TYPE, PCI_EXP_TYPE_ROOT_PORT << 12);
|
|
||||||
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
||||||
+ IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
|
|
||||||
+
|
|
||||||
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
||||||
+ IMX6Q_GPR8_TX_DEEMPH_GEN1, 0 << 0);
|
|
||||||
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
||||||
+ IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, 0 << 6);
|
|
||||||
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
||||||
+ IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, 20 << 12);
|
|
||||||
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
||||||
+ IMX6Q_GPR8_TX_SWING_FULL, 127 << 18);
|
|
||||||
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
||||||
+ IMX6Q_GPR8_TX_SWING_LOW, 127 << 25);
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static void imx6_pcie_host_init(struct pcie_port *pp)
|
|
||||||
+{
|
|
||||||
+ int count = 0;
|
|
||||||
+ struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
|
|
||||||
+
|
|
||||||
+ imx6_pcie_assert_core_reset(pp);
|
|
||||||
+
|
|
||||||
+ imx6_pcie_init_phy(pp);
|
|
||||||
+
|
|
||||||
+ imx6_pcie_deassert_core_reset(pp);
|
|
||||||
+
|
|
||||||
+ dw_pcie_setup_rc(pp);
|
|
||||||
+
|
|
||||||
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
||||||
+ IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
|
|
||||||
+
|
|
||||||
+ while (!dw_pcie_link_up(pp)) {
|
|
||||||
+ usleep_range(100, 1000);
|
|
||||||
+ count++;
|
|
||||||
+ if (count >= 10) {
|
|
||||||
+ dev_err(pp->dev, "phy link never came up\n");
|
|
||||||
+ dev_dbg(pp->dev,
|
|
||||||
+ "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
|
|
||||||
+ readl(pp->dbi_base + PCIE_PHY_DEBUG_R0),
|
|
||||||
+ readl(pp->dbi_base + PCIE_PHY_DEBUG_R1));
|
|
||||||
+ break;
|
|
||||||
+ }
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ return;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int imx6_pcie_link_up(struct pcie_port *pp)
|
|
||||||
+{
|
|
||||||
+ u32 rc, ltssm, rx_valid, temp;
|
|
||||||
+
|
|
||||||
+ /* link is debug bit 36, debug register 1 starts at bit 32 */
|
|
||||||
+ rc = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1) & (0x1 << (36 - 32));
|
|
||||||
+ if (rc)
|
|
||||||
+ return -EAGAIN;
|
|
||||||
+
|
|
||||||
+ /*
|
|
||||||
+ * From L0, initiate MAC entry to gen2 if EP/RC supports gen2.
|
|
||||||
+ * Wait 2ms (LTSSM timeout is 24ms, PHY lock is ~5us in gen2).
|
|
||||||
+ * If (MAC/LTSSM.state == Recovery.RcvrLock)
|
|
||||||
+ * && (PHY/rx_valid==0) then pulse PHY/rx_reset. Transition
|
|
||||||
+ * to gen2 is stuck
|
|
||||||
+ */
|
|
||||||
+ pcie_phy_read(pp->dbi_base, PCIE_PHY_RX_ASIC_OUT, &rx_valid);
|
|
||||||
+ ltssm = readl(pp->dbi_base + PCIE_PHY_DEBUG_R0) & 0x3F;
|
|
||||||
+
|
|
||||||
+ if (rx_valid & 0x01)
|
|
||||||
+ return 0;
|
|
||||||
+
|
|
||||||
+ if (ltssm != 0x0d)
|
|
||||||
+ return 0;
|
|
||||||
+
|
|
||||||
+ dev_err(pp->dev, "transition to gen2 is stuck, reset PHY!\n");
|
|
||||||
+
|
|
||||||
+ pcie_phy_read(pp->dbi_base,
|
|
||||||
+ PHY_RX_OVRD_IN_LO, &temp);
|
|
||||||
+ temp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN
|
|
||||||
+ | PHY_RX_OVRD_IN_LO_RX_PLL_EN);
|
|
||||||
+ pcie_phy_write(pp->dbi_base,
|
|
||||||
+ PHY_RX_OVRD_IN_LO, temp);
|
|
||||||
+
|
|
||||||
+ usleep_range(2000, 3000);
|
|
||||||
+
|
|
||||||
+ pcie_phy_read(pp->dbi_base,
|
|
||||||
+ PHY_RX_OVRD_IN_LO, &temp);
|
|
||||||
+ temp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN
|
|
||||||
+ | PHY_RX_OVRD_IN_LO_RX_PLL_EN);
|
|
||||||
+ pcie_phy_write(pp->dbi_base,
|
|
||||||
+ PHY_RX_OVRD_IN_LO, temp);
|
|
||||||
+
|
|
||||||
+ return 0;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static struct pcie_host_ops imx6_pcie_host_ops = {
|
|
||||||
+ .link_up = imx6_pcie_link_up,
|
|
||||||
+ .host_init = imx6_pcie_host_init,
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+static int imx6_add_pcie_port(struct pcie_port *pp,
|
|
||||||
+ struct platform_device *pdev)
|
|
||||||
+{
|
|
||||||
+ int ret;
|
|
||||||
+
|
|
||||||
+ pp->irq = platform_get_irq(pdev, 0);
|
|
||||||
+ if (!pp->irq) {
|
|
||||||
+ dev_err(&pdev->dev, "failed to get irq\n");
|
|
||||||
+ return -ENODEV;
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ pp->root_bus_nr = -1;
|
|
||||||
+ pp->ops = &imx6_pcie_host_ops;
|
|
||||||
+
|
|
||||||
+ spin_lock_init(&pp->conf_lock);
|
|
||||||
+ ret = dw_pcie_host_init(pp);
|
|
||||||
+ if (ret) {
|
|
||||||
+ dev_err(&pdev->dev, "failed to initialize host\n");
|
|
||||||
+ return ret;
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ return 0;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int __init imx6_pcie_probe(struct platform_device *pdev)
|
|
||||||
+{
|
|
||||||
+ struct imx6_pcie *imx6_pcie;
|
|
||||||
+ struct pcie_port *pp;
|
|
||||||
+ struct device_node *np = pdev->dev.of_node;
|
|
||||||
+ struct resource *dbi_base;
|
|
||||||
+ int ret;
|
|
||||||
+
|
|
||||||
+ imx6_pcie = devm_kzalloc(&pdev->dev, sizeof(*imx6_pcie), GFP_KERNEL);
|
|
||||||
+ if (!imx6_pcie)
|
|
||||||
+ return -ENOMEM;
|
|
||||||
+
|
|
||||||
+ pp = &imx6_pcie->pp;
|
|
||||||
+ pp->dev = &pdev->dev;
|
|
||||||
+
|
|
||||||
+ /* Added for PCI abort handling */
|
|
||||||
+ hook_fault_code(16 + 6, imx6q_pcie_abort_handler, SIGBUS, 0,
|
|
||||||
+ "imprecise external abort");
|
|
||||||
+
|
|
||||||
+ dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
||||||
+ if (!dbi_base) {
|
|
||||||
+ dev_err(&pdev->dev, "dbi_base memory resource not found\n");
|
|
||||||
+ return -ENODEV;
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ pp->dbi_base = devm_ioremap_resource(&pdev->dev, dbi_base);
|
|
||||||
+ if (IS_ERR(pp->dbi_base)) {
|
|
||||||
+ dev_err(&pdev->dev, "unable to remap dbi_base\n");
|
|
||||||
+ ret = PTR_ERR(pp->dbi_base);
|
|
||||||
+ goto err;
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ /* Fetch GPIOs */
|
|
||||||
+ imx6_pcie->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0);
|
|
||||||
+ if (!gpio_is_valid(imx6_pcie->reset_gpio)) {
|
|
||||||
+ dev_err(&pdev->dev, "no reset-gpio defined\n");
|
|
||||||
+ ret = -ENODEV;
|
|
||||||
+ }
|
|
||||||
+ ret = devm_gpio_request_one(&pdev->dev,
|
|
||||||
+ imx6_pcie->reset_gpio,
|
|
||||||
+ GPIOF_OUT_INIT_LOW,
|
|
||||||
+ "PCIe reset");
|
|
||||||
+ if (ret) {
|
|
||||||
+ dev_err(&pdev->dev, "unable to get reset gpio\n");
|
|
||||||
+ goto err;
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ imx6_pcie->power_on_gpio = of_get_named_gpio(np, "power-on-gpio", 0);
|
|
||||||
+ if (gpio_is_valid(imx6_pcie->power_on_gpio)) {
|
|
||||||
+ ret = devm_gpio_request_one(&pdev->dev,
|
|
||||||
+ imx6_pcie->power_on_gpio,
|
|
||||||
+ GPIOF_OUT_INIT_LOW,
|
|
||||||
+ "PCIe power enable");
|
|
||||||
+ if (ret) {
|
|
||||||
+ dev_err(&pdev->dev, "unable to get power-on gpio\n");
|
|
||||||
+ goto err;
|
|
||||||
+ }
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ imx6_pcie->wake_up_gpio = of_get_named_gpio(np, "wake-up-gpio", 0);
|
|
||||||
+ if (gpio_is_valid(imx6_pcie->wake_up_gpio)) {
|
|
||||||
+ ret = devm_gpio_request_one(&pdev->dev,
|
|
||||||
+ imx6_pcie->wake_up_gpio,
|
|
||||||
+ GPIOF_IN,
|
|
||||||
+ "PCIe wake up");
|
|
||||||
+ if (ret) {
|
|
||||||
+ dev_err(&pdev->dev, "unable to get wake-up gpio\n");
|
|
||||||
+ goto err;
|
|
||||||
+ }
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ imx6_pcie->disable_gpio = of_get_named_gpio(np, "disable-gpio", 0);
|
|
||||||
+ if (gpio_is_valid(imx6_pcie->disable_gpio)) {
|
|
||||||
+ ret = devm_gpio_request_one(&pdev->dev,
|
|
||||||
+ imx6_pcie->disable_gpio,
|
|
||||||
+ GPIOF_OUT_INIT_HIGH,
|
|
||||||
+ "PCIe disable endpoint");
|
|
||||||
+ if (ret) {
|
|
||||||
+ dev_err(&pdev->dev, "unable to get disable-ep gpio\n");
|
|
||||||
+ goto err;
|
|
||||||
+ }
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ /* Fetch clocks */
|
|
||||||
+ imx6_pcie->lvds_gate = devm_clk_get(&pdev->dev, "lvds_gate");
|
|
||||||
+ if (IS_ERR(imx6_pcie->lvds_gate)) {
|
|
||||||
+ dev_err(&pdev->dev,
|
|
||||||
+ "lvds_gate clock select missing or invalid\n");
|
|
||||||
+ ret = PTR_ERR(imx6_pcie->lvds_gate);
|
|
||||||
+ goto err;
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ imx6_pcie->sata_ref_100m = devm_clk_get(&pdev->dev, "sata_ref_100m");
|
|
||||||
+ if (IS_ERR(imx6_pcie->sata_ref_100m)) {
|
|
||||||
+ dev_err(&pdev->dev,
|
|
||||||
+ "sata_ref_100m clock source missing or invalid\n");
|
|
||||||
+ ret = PTR_ERR(imx6_pcie->sata_ref_100m);
|
|
||||||
+ goto err;
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ imx6_pcie->pcie_ref_125m = devm_clk_get(&pdev->dev, "pcie_ref_125m");
|
|
||||||
+ if (IS_ERR(imx6_pcie->pcie_ref_125m)) {
|
|
||||||
+ dev_err(&pdev->dev,
|
|
||||||
+ "pcie_ref_125m clock source missing or invalid\n");
|
|
||||||
+ ret = PTR_ERR(imx6_pcie->pcie_ref_125m);
|
|
||||||
+ goto err;
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ imx6_pcie->pcie_axi = devm_clk_get(&pdev->dev, "pcie_axi");
|
|
||||||
+ if (IS_ERR(imx6_pcie->pcie_axi)) {
|
|
||||||
+ dev_err(&pdev->dev,
|
|
||||||
+ "pcie_axi clock source missing or invalid\n");
|
|
||||||
+ ret = PTR_ERR(imx6_pcie->pcie_axi);
|
|
||||||
+ goto err;
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ /* Grab GPR config register range */
|
|
||||||
+ imx6_pcie->iomuxc_gpr =
|
|
||||||
+ syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
|
|
||||||
+ if (IS_ERR(imx6_pcie->iomuxc_gpr)) {
|
|
||||||
+ dev_err(&pdev->dev, "unable to find iomuxc registers\n");
|
|
||||||
+ ret = PTR_ERR(imx6_pcie->iomuxc_gpr);
|
|
||||||
+ goto err;
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ ret = imx6_add_pcie_port(pp, pdev);
|
|
||||||
+ if (ret < 0)
|
|
||||||
+ goto err;
|
|
||||||
+
|
|
||||||
+ platform_set_drvdata(pdev, imx6_pcie);
|
|
||||||
+ return 0;
|
|
||||||
+
|
|
||||||
+err:
|
|
||||||
+ return ret;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static const struct of_device_id imx6_pcie_of_match[] = {
|
|
||||||
+ { .compatible = "fsl,imx6q-pcie", },
|
|
||||||
+ {},
|
|
||||||
+};
|
|
||||||
+MODULE_DEVICE_TABLE(of, imx6_pcie_of_match);
|
|
||||||
+
|
|
||||||
+static struct platform_driver imx6_pcie_driver = {
|
|
||||||
+ .driver = {
|
|
||||||
+ .name = "imx6q-pcie",
|
|
||||||
+ .owner = THIS_MODULE,
|
|
||||||
+ .of_match_table = of_match_ptr(imx6_pcie_of_match),
|
|
||||||
+ },
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+/* Freescale PCIe driver does not allow module unload */
|
|
||||||
+
|
|
||||||
+static int __init imx6_pcie_init(void)
|
|
||||||
+{
|
|
||||||
+ return platform_driver_probe(&imx6_pcie_driver, imx6_pcie_probe);
|
|
||||||
+}
|
|
||||||
+module_init(imx6_pcie_init);
|
|
||||||
+
|
|
||||||
+MODULE_AUTHOR("Sean Cross <xobs@kosagi.com>");
|
|
||||||
+MODULE_DESCRIPTION("Freescale i.MX6 PCIe host controller driver");
|
|
||||||
+MODULE_LICENSE("GPL v2");
|
|
||||||
|
|
@ -1,58 +0,0 @@
|
||||||
From: Pratyush Anand <pratyush.anand@st.com>
|
|
||||||
|
|
||||||
pp->io_base which is the input of the outbound IO address translation
|
|
||||||
unit should be the cpu address, it was programmed wrongly to realio
|
|
||||||
address.
|
|
||||||
|
|
||||||
We should pass global_io_offset rather than sys->io_offset to
|
|
||||||
pci_ioremap_io, so we map the new window into the first available spot
|
|
||||||
in the Linux view of the I/O space.
|
|
||||||
|
|
||||||
We must also pass cpu address instead of realio address to
|
|
||||||
pci_ioremap_io.
|
|
||||||
|
|
||||||
This patch fixes above issue. It has been tested with Lecroy PTC in AIC
|
|
||||||
mode and Pericom PI7C9X2G303EL PCIe switch, which does not work
|
|
||||||
otherwise.
|
|
||||||
|
|
||||||
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
|
|
||||||
Tested-by: Mohit Kumar <mohit.kumar@st.com>
|
|
||||||
Tested-by: Tim Harvey <tharvey@gateworks.com>
|
|
||||||
Cc: Arnd Bergmann <arnd@arndb.de>
|
|
||||||
Cc: Marek Vasut <marex@denx.de>
|
|
||||||
Cc: Richard Zhu <Hong-Xing.Zhu@freescale.com>
|
|
||||||
Cc: linux-pci@vger.kernel.org
|
|
||||||
Cc: spear-devel@list.st.com
|
|
||||||
---
|
|
||||||
drivers/pci/host/pcie-designware.c | 5 ++---
|
|
||||||
1 files changed, 2 insertions(+), 3 deletions(-)
|
|
||||||
|
|
||||||
http://thread.gmane.org/gmane.linux.kernel.pci/27204
|
|
||||||
|
|
||||||
--- a/drivers/pci/host/pcie-designware.c
|
|
||||||
+++ b/drivers/pci/host/pcie-designware.c
|
|
||||||
@@ -177,6 +177,7 @@ int __init dw_pcie_host_init(struct pcie
|
|
||||||
+ global_io_offset);
|
|
||||||
pp->config.io_size = resource_size(&pp->io);
|
|
||||||
pp->config.io_bus_addr = range.pci_addr;
|
|
||||||
+ pp->io_base = range.cpu_addr;
|
|
||||||
}
|
|
||||||
if (restype == IORESOURCE_MEM) {
|
|
||||||
of_pci_range_to_resource(&range, np, &pp->mem);
|
|
||||||
@@ -202,7 +203,6 @@ int __init dw_pcie_host_init(struct pcie
|
|
||||||
|
|
||||||
pp->cfg0_base = pp->cfg.start;
|
|
||||||
pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size;
|
|
||||||
- pp->io_base = pp->io.start;
|
|
||||||
pp->mem_base = pp->mem.start;
|
|
||||||
|
|
||||||
pp->va_cfg0_base = devm_ioremap(pp->dev, pp->cfg0_base,
|
|
||||||
@@ -449,7 +449,7 @@ int dw_pcie_setup(int nr, struct pci_sys
|
|
||||||
|
|
||||||
if (global_io_offset < SZ_1M && pp->config.io_size > 0) {
|
|
||||||
sys->io_offset = global_io_offset - pp->config.io_bus_addr;
|
|
||||||
- pci_ioremap_io(sys->io_offset, pp->io.start);
|
|
||||||
+ pci_ioremap_io(global_io_offset, pp->io_base);
|
|
||||||
global_io_offset += SZ_64K;
|
|
||||||
pci_add_resource_offset(&sys->resources, &pp->io,
|
|
||||||
sys->io_offset);
|
|
||||||
|
|
@ -1,24 +0,0 @@
|
||||||
From 8c8c877d8490c9d51210ee9e90d5f4d740f115c9 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Tim Harvey <tharvey@gateworks.com>
|
|
||||||
Date: Thu, 17 Oct 2013 15:55:47 -0700
|
|
||||||
Subject: [PATCH 3/5] PCI: imx6: init must be early
|
|
||||||
|
|
||||||
If driver init is not early the pcie port driver gets initalized
|
|
||||||
first and interrupts are not configured for the imx6 pcie driver.
|
|
||||||
|
|
||||||
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
|
|
||||||
---
|
|
||||||
drivers/pci/host/pci-imx6.c | 2 +-
|
|
||||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
|
||||||
|
|
||||||
--- a/drivers/pci/host/pci-imx6.c
|
|
||||||
+++ b/drivers/pci/host/pci-imx6.c
|
|
||||||
@@ -568,7 +568,7 @@ static int __init imx6_pcie_init(void)
|
|
||||||
{
|
|
||||||
return platform_driver_probe(&imx6_pcie_driver, imx6_pcie_probe);
|
|
||||||
}
|
|
||||||
-module_init(imx6_pcie_init);
|
|
||||||
+fs_initcall(imx6_pcie_init);
|
|
||||||
|
|
||||||
MODULE_AUTHOR("Sean Cross <xobs@kosagi.com>");
|
|
||||||
MODULE_DESCRIPTION("Freescale i.MX6 PCIe host controller driver");
|
|
||||||
|
|
@ -1,36 +0,0 @@
|
||||||
From 8590081d5328fe59d4f72aaadafb47fb91d8dc7c Mon Sep 17 00:00:00 2001
|
|
||||||
From: Tim Harvey <tharvey@gateworks.com>
|
|
||||||
Date: Thu, 17 Oct 2013 15:52:16 -0700
|
|
||||||
Subject: [PATCH] PCI: imx6: fix imprecise abort handler
|
|
||||||
|
|
||||||
An imprecise abort is triggered when a port behind a switch is accessed
|
|
||||||
and no device is present. At enumeration, imprecise aborts are not enabled
|
|
||||||
thus this ends up getting deferred until the kernel has completed init. At
|
|
||||||
that point we must not adjust PC - the handler must do nothing, but a handler
|
|
||||||
must exist.
|
|
||||||
|
|
||||||
This fixes random crashes that occur right after freeing init.
|
|
||||||
This is against linux-pci/host-imx6.
|
|
||||||
|
|
||||||
Acked-by: Marek Vasut <marex@denx.de>
|
|
||||||
Tested-by: Marek Vasut <marex@denx.de>
|
|
||||||
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
|
|
||||||
---
|
|
||||||
drivers/pci/host/pci-imx6.c | 6 ------
|
|
||||||
1 file changed, 6 deletions(-)
|
|
||||||
|
|
||||||
--- a/drivers/pci/host/pci-imx6.c
|
|
||||||
+++ b/drivers/pci/host/pci-imx6.c
|
|
||||||
@@ -200,12 +200,6 @@ static int pcie_phy_write(void __iomem *
|
|
||||||
static int imx6q_pcie_abort_handler(unsigned long addr,
|
|
||||||
unsigned int fsr, struct pt_regs *regs)
|
|
||||||
{
|
|
||||||
- /*
|
|
||||||
- * If it was an imprecise abort, then we need to correct the
|
|
||||||
- * return address to be _after_ the instruction.
|
|
||||||
- */
|
|
||||||
- if (fsr & (1 << 10))
|
|
||||||
- regs->ARM_pc += 4;
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
@ -1,24 +0,0 @@
|
||||||
From 11e8d0ed8cc3b415767961555efc2885791a9391 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Tim Harvey <tharvey@gateworks.com>
|
|
||||||
Date: Thu, 17 Oct 2013 15:57:28 -0700
|
|
||||||
Subject: [PATCH 4/5] PCI: imx6: increase link startup
|
|
||||||
|
|
||||||
An increase link startup delay is required when certain PCI switches are
|
|
||||||
attached to the root complex.
|
|
||||||
|
|
||||||
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
|
|
||||||
---
|
|
||||||
drivers/pci/host/pci-imx6.c | 2 +-
|
|
||||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
|
||||||
|
|
||||||
--- a/drivers/pci/host/pci-imx6.c
|
|
||||||
+++ b/drivers/pci/host/pci-imx6.c
|
|
||||||
@@ -318,7 +318,7 @@ static void imx6_pcie_host_init(struct p
|
|
||||||
while (!dw_pcie_link_up(pp)) {
|
|
||||||
usleep_range(100, 1000);
|
|
||||||
count++;
|
|
||||||
- if (count >= 10) {
|
|
||||||
+ if (count >= 200) {
|
|
||||||
dev_err(pp->dev, "phy link never came up\n");
|
|
||||||
dev_dbg(pp->dev,
|
|
||||||
"DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
|
|
||||||
|
|
@ -1,43 +0,0 @@
|
||||||
From: Tim Harvey <tharvey@gateworks.com>
|
|
||||||
Subject: [PATCH] PCI: imx6: add support for legacy irqs
|
|
||||||
|
|
||||||
The i.MX6 supports legacy IRQ's via 155,154,153,152. When devices
|
|
||||||
are behind a PCIe-to-PCIe switch (at least for the TI XIO2001) the
|
|
||||||
mapping is reversed from when they are behind a PCIe switch.
|
|
||||||
|
|
||||||
This patch still needs some review and clarification before going
|
|
||||||
upstream.
|
|
||||||
---
|
|
||||||
drivers/pci/host/pcie-designware.c | 21 ++++++++++++++++++++-
|
|
||||||
1 file changed, 20 insertions(+), 1 deletion(-)
|
|
||||||
|
|
||||||
--- a/drivers/pci/host/pcie-designware.c
|
|
||||||
+++ b/drivers/pci/host/pcie-designware.c
|
|
||||||
@@ -482,7 +482,26 @@ int dw_pcie_map_irq(const struct pci_dev
|
|
||||||
{
|
|
||||||
struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata);
|
|
||||||
|
|
||||||
- return pp->irq;
|
|
||||||
+ /* TI XIO2001 PCIe-to-PCI bridge IRQs are flipped it seems */
|
|
||||||
+ if ( dev->bus && dev->bus->self
|
|
||||||
+ && (dev->bus->self->vendor == 0x104c)
|
|
||||||
+ && (dev->bus->self->device == 0x8240)) {
|
|
||||||
+ switch (pin) {
|
|
||||||
+ case 1: return pp->irq - 3;
|
|
||||||
+ case 2: return pp->irq - 2;
|
|
||||||
+ case 3: return pp->irq - 1;
|
|
||||||
+ case 4: return pp->irq;
|
|
||||||
+ default: return -1;
|
|
||||||
+ }
|
|
||||||
+ } else {
|
|
||||||
+ switch (pin) {
|
|
||||||
+ case 1: return pp->irq;
|
|
||||||
+ case 2: return pp->irq - 1;
|
|
||||||
+ case 3: return pp->irq - 2;
|
|
||||||
+ case 4: return pp->irq - 3;
|
|
||||||
+ default: return -1;
|
|
||||||
+ }
|
|
||||||
+ }
|
|
||||||
}
|
|
||||||
|
|
||||||
static struct hw_pci dw_pci = {
|
|
||||||
|
|
@ -1,38 +0,0 @@
|
||||||
From: Tim Harvey <tharvey@gateworks.com>
|
|
||||||
Subject: [PATCH] i2c: imx: retry on NAK
|
|
||||||
|
|
||||||
In case of busy i2c try again to get ACK.
|
|
||||||
|
|
||||||
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
|
|
||||||
Tested-by: Luka Perkov <luka@openwrt.org>
|
|
||||||
---
|
|
||||||
drivers/i2c/busses/i2c-imx.c | 4 +++-
|
|
||||||
1 file changed, 3 insertions(+), 1 deletion(-)
|
|
||||||
|
|
||||||
--- a/drivers/i2c/busses/i2c-imx.c
|
|
||||||
+++ b/drivers/i2c/busses/i2c-imx.c
|
|
||||||
@@ -62,6 +62,7 @@
|
|
||||||
|
|
||||||
/* Default value */
|
|
||||||
#define IMX_I2C_BIT_RATE 100000 /* 100kHz */
|
|
||||||
+#define IMX_I2C_MAX_RETRIES 3 /* number of retries to attempt */
|
|
||||||
|
|
||||||
/* IMX I2C registers:
|
|
||||||
* the I2C register offset is different between SoCs,
|
|
||||||
@@ -298,7 +299,7 @@ static int i2c_imx_acked(struct imx_i2c_
|
|
||||||
{
|
|
||||||
if (imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR) & I2SR_RXAK) {
|
|
||||||
dev_dbg(&i2c_imx->adapter.dev, "<%s> No ACK\n", __func__);
|
|
||||||
- return -EIO; /* No ACK */
|
|
||||||
+ return -EAGAIN; /* try again */
|
|
||||||
}
|
|
||||||
|
|
||||||
dev_dbg(&i2c_imx->adapter.dev, "<%s> ACK received\n", __func__);
|
|
||||||
@@ -633,6 +634,7 @@ static int i2c_imx_probe(struct platform
|
|
||||||
i2c_imx->adapter.dev.parent = &pdev->dev;
|
|
||||||
i2c_imx->adapter.nr = pdev->id;
|
|
||||||
i2c_imx->adapter.dev.of_node = pdev->dev.of_node;
|
|
||||||
+ i2c_imx->adapter.retries = IMX_I2C_MAX_RETRIES;
|
|
||||||
i2c_imx->base = base;
|
|
||||||
|
|
||||||
/* Get I2C clock */
|
|
||||||
|
|
@ -1,69 +0,0 @@
|
||||||
From: Tim Harvey <tharvey@gateworks.com>
|
|
||||||
Subject: [PATCH] sky2: allow mac to come from dt
|
|
||||||
|
|
||||||
The driver reads the mac address from the device registers which would
|
|
||||||
need to have been programmed by the bootloader. This patch adds
|
|
||||||
the ability to pull the mac from devicetree via the aliases/sky2 node.
|
|
||||||
|
|
||||||
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
|
|
||||||
---
|
|
||||||
drivers/net/ethernet/marvell/sky2.c | 33 ++++++++++++++++++++++++++++++++-
|
|
||||||
1 file changed, 32 insertions(+), 1 deletion(-)
|
|
||||||
|
|
||||||
--- a/drivers/net/ethernet/marvell/sky2.c
|
|
||||||
+++ b/drivers/net/ethernet/marvell/sky2.c
|
|
||||||
@@ -44,6 +44,8 @@
|
|
||||||
#include <linux/prefetch.h>
|
|
||||||
#include <linux/debugfs.h>
|
|
||||||
#include <linux/mii.h>
|
|
||||||
+#include <linux/of_device.h>
|
|
||||||
+#include <linux/of_net.h>
|
|
||||||
|
|
||||||
#include <asm/irq.h>
|
|
||||||
|
|
||||||
@@ -4748,6 +4750,7 @@ static struct net_device *sky2_init_netd
|
|
||||||
{
|
|
||||||
struct sky2_port *sky2;
|
|
||||||
struct net_device *dev = alloc_etherdev(sizeof(*sky2));
|
|
||||||
+ unsigned char *iap, tmpaddr[ETH_ALEN];
|
|
||||||
|
|
||||||
if (!dev)
|
|
||||||
return NULL;
|
|
||||||
@@ -4802,8 +4805,36 @@ static struct net_device *sky2_init_netd
|
|
||||||
|
|
||||||
dev->features |= dev->hw_features;
|
|
||||||
|
|
||||||
+ /*
|
|
||||||
+ * try to get mac address in the following order:
|
|
||||||
+ * 1) from device tree data
|
|
||||||
+ * 2) from internal registers set by bootloader
|
|
||||||
+ */
|
|
||||||
+ iap = NULL;
|
|
||||||
+ if (IS_ENABLED(CONFIG_OF)) {
|
|
||||||
+ struct device_node *np;
|
|
||||||
+ np = of_find_node_by_path("/aliases");
|
|
||||||
+ if (np) {
|
|
||||||
+ const char *path = of_get_property(np, "sky2", NULL);
|
|
||||||
+ if (path)
|
|
||||||
+ np = of_find_node_by_path(path);
|
|
||||||
+ if (np)
|
|
||||||
+ path = of_get_mac_address(np);
|
|
||||||
+ if (path)
|
|
||||||
+ iap = (unsigned char *) path;
|
|
||||||
+ }
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ /*
|
|
||||||
+ * 2) mac registers set by bootloader
|
|
||||||
+ */
|
|
||||||
+ if (!iap || !is_valid_ether_addr(iap)) {
|
|
||||||
+ memcpy_fromio(&tmpaddr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
|
|
||||||
+ iap = &tmpaddr[0];
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
/* read the mac address */
|
|
||||||
- memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
|
|
||||||
+ memcpy(dev->dev_addr, iap, ETH_ALEN);
|
|
||||||
|
|
||||||
return dev;
|
|
||||||
}
|
|
||||||
|
|
@ -1,11 +0,0 @@
|
||||||
--- a/arch/arm/boot/dts/imx6dl-wandboard.dts
|
|
||||||
+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
|
|
||||||
@@ -19,4 +19,8 @@
|
|
||||||
memory {
|
|
||||||
reg = <0x10000000 0x40000000>;
|
|
||||||
};
|
|
||||||
+
|
|
||||||
+ chosen {
|
|
||||||
+ bootargs = "console=ttymxc0,115200";
|
|
||||||
+ };
|
|
||||||
};
|
|
||||||
Loading…
Reference in New Issue