mirror of https://github.com/hak5/openwrt.git
ar71xx: add support for Wallys DR531
Wallys DR531 is based on Qualcomm Atheros QCA9531 v2. Short specification: - 550/400/200 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet - 64 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz with external PA (SE2576L), up to 30 dBm - 2x MMCX connectors - mini-PCIe connector with PCIe/USB buses and SIM slot - 7x LED, 1x button, 1x optional buzzer - UART, (E)JTAG and LED headers Default configuration: - WAN on eth1 (RJ45 near DC jack) - LAN on eth0 (RJ45 near button) - S4 LED set to be status LED - all LEDs configurable form user space - button configured for reset Flash instruction (do it under U-Boot, using UART): 1. tftp 0x80060000 lede-ar71xx-generic-dr531-squashfs-sysupgrade.bin 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9f050000" 5. saveenv && reset Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>lede-17.01
Piotr Dymacz
Jo-Philipp Wich
parent
3c6b091b65
commit
e767980eb8
|
|
@ -156,6 +156,11 @@ db120)
|
|||
ucidef_set_led_usbdev "usb" "USB" "db120:green:usb" "1-1"
|
||||
;;
|
||||
|
||||
dr531)
|
||||
ucidef_set_led_netdev "lan" "LAN" "dr531:green:lan" "eth0"
|
||||
ucidef_set_led_netdev "wan" "WAN" "dr531:green:wan" "eth1"
|
||||
;;
|
||||
|
||||
dragino2)
|
||||
ucidef_set_led_wlan "wlan" "WLAN" "dragino2:red:wlan" "phy0tpt"
|
||||
ucidef_set_led_netdev "lan" "LAN" "dragino2:red:lan" "eth0"
|
||||
|
|
|
|||
|
|
@ -426,6 +426,7 @@ unifiac-pro)
|
|||
"0@eth0" "2:lan" "3:wan"
|
||||
;;
|
||||
|
||||
dr531 |\
|
||||
wpj531)
|
||||
ucidef_set_interfaces_lan_wan "eth0" "eth1"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -113,6 +113,9 @@ get_status_led() {
|
|||
dr344)
|
||||
status_led="dr344:green:status"
|
||||
;;
|
||||
dr531)
|
||||
status_led="dr531:green:sig4"
|
||||
;;
|
||||
dragino2)
|
||||
status_led="dragino2:red:system"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -505,6 +505,9 @@ ar71xx_board_detect() {
|
|||
*DR344)
|
||||
name="dr344"
|
||||
;;
|
||||
*DR531)
|
||||
name="dr531"
|
||||
;;
|
||||
*"Dragino v2")
|
||||
name="dragino2"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -224,6 +224,7 @@ platform_check_image() {
|
|||
dlan-hotspot | \
|
||||
dlan-pro-500-wp | \
|
||||
dlan-pro-1200-ac | \
|
||||
dr531 | \
|
||||
dragino2 | \
|
||||
epg5000 | \
|
||||
esr1750 | \
|
||||
|
|
|
|||
|
|
@ -76,6 +76,7 @@ CONFIG_ATH79_MACH_DLAN_HOTSPOT=y
|
|||
CONFIG_ATH79_MACH_DLAN_PRO_1200_AC=y
|
||||
CONFIG_ATH79_MACH_DLAN_PRO_500_WP=y
|
||||
CONFIG_ATH79_MACH_DR344=y
|
||||
CONFIG_ATH79_MACH_DR531=y
|
||||
CONFIG_ATH79_MACH_DRAGINO2=y
|
||||
CONFIG_ATH79_MACH_EAP300V2=y
|
||||
CONFIG_ATH79_MACH_EAP7660D=y
|
||||
|
|
|
|||
|
|
@ -522,6 +522,16 @@ config ATH79_MACH_DR344
|
|||
select ATH79_DEV_USB
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
config ATH79_MACH_DR531
|
||||
bool "Wallys DR531 board support"
|
||||
select SOC_QCA953X
|
||||
select ATH79_DEV_ETH
|
||||
select ATH79_DEV_GPIO_BUTTONS
|
||||
select ATH79_DEV_LEDS_GPIO
|
||||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_USB
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
config ATH79_MACH_DRAGINO2
|
||||
bool "DRAGINO V2 support"
|
||||
select SOC_AR933X
|
||||
|
|
|
|||
|
|
@ -80,6 +80,7 @@ obj-$(CONFIG_ATH79_MACH_DIR_615_I1) += mach-dir-615-i1.o
|
|||
obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o
|
||||
obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += mach-dir-825-c1.o
|
||||
obj-$(CONFIG_ATH79_MACH_DR344) += mach-dr344.o
|
||||
obj-$(CONFIG_ATH79_MACH_DR531) += mach-dr531.o
|
||||
obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o
|
||||
obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o
|
||||
obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,155 @@
|
|||
/*
|
||||
* Wallys DR531 board support
|
||||
*
|
||||
* Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
|
||||
*
|
||||
* Based on mach-wpj531.c
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/pci.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
#include <asm/mach-ath79/ath79.h>
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "dev-ap9x-pci.h"
|
||||
#include "dev-eth.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "dev-usb.h"
|
||||
#include "dev-wmac.h"
|
||||
#include "machtypes.h"
|
||||
#include "pci.h"
|
||||
|
||||
#define DR531_GPIO_BUZZER 4
|
||||
#define DR531_GPIO_LED_WAN 11
|
||||
#define DR531_GPIO_LED_LAN 14
|
||||
#define DR531_GPIO_LED_SIG1 12
|
||||
#define DR531_GPIO_LED_SIG2 16
|
||||
#define DR531_GPIO_LED_SIG3 15
|
||||
#define DR531_GPIO_LED_SIG4 13
|
||||
|
||||
#define DR531_GPIO_BTN_RESET 17
|
||||
|
||||
#define DR531_KEYS_POLL_INTERVAL 20 /* msecs */
|
||||
#define DR531_KEYS_DEBOUNCE_INTERVAL (3 * DR531_KEYS_POLL_INTERVAL)
|
||||
|
||||
#define DR531_MAC0_OFFSET 0x0
|
||||
#define DR531_MAC1_OFFSET 0x8
|
||||
#define DR531_WMAC_CALDATA_OFFSET 0x1000
|
||||
|
||||
static struct gpio_led dr531_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "dr531:green:wan",
|
||||
.gpio = DR531_GPIO_LED_WAN,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "dr531:green:lan",
|
||||
.gpio = DR531_GPIO_LED_LAN,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "dr531:green:sig1",
|
||||
.gpio = DR531_GPIO_LED_SIG1,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "dr531:green:sig2",
|
||||
.gpio = DR531_GPIO_LED_SIG2,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "dr531:green:sig3",
|
||||
.gpio = DR531_GPIO_LED_SIG3,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "dr531:green:sig4",
|
||||
.gpio = DR531_GPIO_LED_SIG4,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "dr531:buzzer",
|
||||
.gpio = DR531_GPIO_BUZZER,
|
||||
.active_low = 0,
|
||||
}
|
||||
};
|
||||
|
||||
static struct gpio_keys_button dr531_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "reset",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.debounce_interval = DR531_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = DR531_GPIO_BTN_RESET,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static void __init dr531_gpio_setup(void)
|
||||
{
|
||||
ath79_gpio_direction_select(DR531_GPIO_BUZZER, true);
|
||||
ath79_gpio_direction_select(DR531_GPIO_LED_WAN, true);
|
||||
ath79_gpio_direction_select(DR531_GPIO_LED_LAN, true);
|
||||
ath79_gpio_direction_select(DR531_GPIO_LED_SIG1, true);
|
||||
ath79_gpio_direction_select(DR531_GPIO_LED_SIG2, true);
|
||||
ath79_gpio_direction_select(DR531_GPIO_LED_SIG3, true);
|
||||
ath79_gpio_direction_select(DR531_GPIO_LED_SIG4, true);
|
||||
|
||||
ath79_gpio_output_select(DR531_GPIO_BUZZER, 0);
|
||||
ath79_gpio_output_select(DR531_GPIO_LED_WAN, 0);
|
||||
ath79_gpio_output_select(DR531_GPIO_LED_LAN, 0);
|
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(dr531_leds_gpio),
|
||||
dr531_leds_gpio);
|
||||
|
||||
ath79_register_gpio_keys_polled(-1, DR531_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(dr531_gpio_keys),
|
||||
dr531_gpio_keys);
|
||||
}
|
||||
|
||||
static void __init dr531_setup(void)
|
||||
{
|
||||
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
||||
u8 *mac = (u8 *) KSEG1ADDR(0x1f03f810);
|
||||
|
||||
ath79_register_m25p80(NULL);
|
||||
|
||||
dr531_gpio_setup();
|
||||
|
||||
ath79_setup_ar933x_phy4_switch(false, false);
|
||||
|
||||
ath79_register_mdio(0, 0x0);
|
||||
|
||||
/* LAN */
|
||||
ath79_eth0_data.duplex = DUPLEX_FULL;
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
||||
ath79_eth0_data.speed = SPEED_100;
|
||||
ath79_eth0_data.phy_mask = BIT(4);
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, mac + DR531_MAC1_OFFSET, 0);
|
||||
ath79_register_eth(0);
|
||||
|
||||
/* WAN */
|
||||
ath79_switch_data.phy4_mii_en = 1;
|
||||
ath79_eth1_data.duplex = DUPLEX_FULL;
|
||||
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
||||
ath79_eth1_data.speed = SPEED_1000;
|
||||
ath79_switch_data.phy_poll_mask |= BIT(4);
|
||||
ath79_init_mac(ath79_eth1_data.mac_addr, mac + DR531_MAC0_OFFSET, 0);
|
||||
ath79_register_eth(1);
|
||||
|
||||
ath79_register_wmac(art + DR531_WMAC_CALDATA_OFFSET, NULL);
|
||||
|
||||
ath79_register_pci();
|
||||
ath79_register_usb();
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_DR531, "DR531", "Wallys DR531", dr531_setup);
|
||||
|
|
@ -72,6 +72,7 @@ enum ath79_mach_type {
|
|||
ATH79_MACH_DLAN_PRO_500_WP, /* devolo dLAN pro 500 Wireless+ */
|
||||
ATH79_MACH_DLAN_PRO_1200_AC, /* devolo dLAN pro 1200+ WiFi ac*/
|
||||
ATH79_MACH_DR344, /* Wallys DR344 */
|
||||
ATH79_MACH_DR531, /* Wallys DR531 */
|
||||
ATH79_MACH_DRAGINO2, /* Dragino Version 2 */
|
||||
ATH79_MACH_ESR900, /* EnGenius ESR900 */
|
||||
ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */
|
||||
|
|
|
|||
|
|
@ -67,6 +67,15 @@ define Device/gl-domino
|
|||
endef
|
||||
TARGET_DEVICES += gl-domino
|
||||
|
||||
define Device/dr531
|
||||
DEVICE_TITLE := Wallys DR531
|
||||
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
||||
BOARDNAME = DR531
|
||||
IMAGE_SIZE = 7808k
|
||||
MTDPARTS = spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(partition-table)ro,7808k(firmware),64k(art)ro
|
||||
endef
|
||||
TARGET_DEVICES += dr531
|
||||
|
||||
define Device/wndr3700
|
||||
DEVICE_TITLE := NETGEAR WNDR3700
|
||||
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev kmod-leds-wndr3700-usb
|
||||
|
|
|
|||
Loading…
Reference in New Issue