mirror of https://github.com/hak5/openwrt.git
bcm53xx: backport USB 3.0 Northstar PHY driver
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>lede-17.01
Rafał Miłecki
parent
b9d8c81018
commit
e674c1aab3
|
|
@ -259,6 +259,7 @@ CONFIG_PERF_USE_VMALLOC=y
|
||||||
CONFIG_PGTABLE_LEVELS=2
|
CONFIG_PGTABLE_LEVELS=2
|
||||||
CONFIG_PHYLIB=y
|
CONFIG_PHYLIB=y
|
||||||
# CONFIG_PHY_BCM_NS_USB2 is not set
|
# CONFIG_PHY_BCM_NS_USB2 is not set
|
||||||
|
# CONFIG_PHY_BCM_NS_USB3 is not set
|
||||||
CONFIG_PINCTRL=y
|
CONFIG_PINCTRL=y
|
||||||
# CONFIG_PL310_ERRATA_588369 is not set
|
# CONFIG_PL310_ERRATA_588369 is not set
|
||||||
# CONFIG_PL310_ERRATA_727915 is not set
|
# CONFIG_PL310_ERRATA_727915 is not set
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,361 @@
|
||||||
|
From b8d7478ecfec51b3430f677da44e662d5ff12444 Mon Sep 17 00:00:00 2001
|
||||||
|
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
|
||||||
|
Date: Fri, 12 Aug 2016 00:28:03 +0200
|
||||||
|
Subject: [PATCH] phy: bcm-ns-usb3: new driver for USB 3.0 PHY on Northstar
|
||||||
|
MIME-Version: 1.0
|
||||||
|
Content-Type: text/plain; charset=UTF-8
|
||||||
|
Content-Transfer-Encoding: 8bit
|
||||||
|
|
||||||
|
Northstar is a family of SoCs used in home routers. They have USB 2.0
|
||||||
|
and 3.0 controllers with PHYs that need to be properly initialized.
|
||||||
|
This driver provides PHY init support in a generic way and can be bound
|
||||||
|
with XHCI controller driver.
|
||||||
|
|
||||||
|
There aren't any public datasheets from Broadcom so we can't have nice
|
||||||
|
defines for all used bits. It means we just follow Broadcom's
|
||||||
|
initialization procedure using their magic values. We were quite lucky
|
||||||
|
actually that Broadcom put some comments in their SDK reference code
|
||||||
|
explaining what given writes are responsible for.
|
||||||
|
|
||||||
|
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
||||||
|
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
||||||
|
---
|
||||||
|
.../devicetree/bindings/phy/bcm-ns-usb3-phy.txt | 23 ++
|
||||||
|
drivers/phy/Kconfig | 9 +
|
||||||
|
drivers/phy/Makefile | 1 +
|
||||||
|
drivers/phy/phy-bcm-ns-usb3.c | 274 +++++++++++++++++++++
|
||||||
|
4 files changed, 307 insertions(+)
|
||||||
|
create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
|
||||||
|
create mode 100644 drivers/phy/phy-bcm-ns-usb3.c
|
||||||
|
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
|
||||||
|
@@ -0,0 +1,23 @@
|
||||||
|
+Driver for Broadcom Northstar USB 3.0 PHY
|
||||||
|
+
|
||||||
|
+Required properties:
|
||||||
|
+
|
||||||
|
+- compatible: one of: "brcm,ns-ax-usb3-phy", "brcm,ns-bx-usb3-phy".
|
||||||
|
+- reg: register mappings for DMP (Device Management Plugin) and ChipCommon B
|
||||||
|
+ MMI.
|
||||||
|
+- reg-names: "dmp" and "ccb-mii"
|
||||||
|
+
|
||||||
|
+Initialization of USB 3.0 PHY depends on Northstar version. There are currently
|
||||||
|
+three known series: Ax, Bx and Cx.
|
||||||
|
+Known A0: BCM4707 rev 0
|
||||||
|
+Known B0: BCM4707 rev 4, BCM53573 rev 2
|
||||||
|
+Known B1: BCM4707 rev 6
|
||||||
|
+Known C0: BCM47094 rev 0
|
||||||
|
+
|
||||||
|
+Example:
|
||||||
|
+ usb3-phy {
|
||||||
|
+ compatible = "brcm,ns-ax-usb3-phy";
|
||||||
|
+ reg = <0x18105000 0x1000>, <0x18003000 0x1000>;
|
||||||
|
+ reg-names = "dmp", "ccb-mii";
|
||||||
|
+ #phy-cells = <0>;
|
||||||
|
+ };
|
||||||
|
--- a/drivers/phy/Kconfig
|
||||||
|
+++ b/drivers/phy/Kconfig
|
||||||
|
@@ -24,6 +24,15 @@ config PHY_BCM_NS_USB2
|
||||||
|
Enable this to support Broadcom USB 2.0 PHY connected to the USB
|
||||||
|
controller on Northstar family.
|
||||||
|
|
||||||
|
+config PHY_BCM_NS_USB3
|
||||||
|
+ tristate "Broadcom Northstar USB 3.0 PHY Driver"
|
||||||
|
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
|
||||||
|
+ depends on HAS_IOMEM && OF
|
||||||
|
+ select GENERIC_PHY
|
||||||
|
+ help
|
||||||
|
+ Enable this to support Broadcom USB 3.0 PHY connected to the USB
|
||||||
|
+ controller on Northstar family.
|
||||||
|
+
|
||||||
|
config PHY_BERLIN_USB
|
||||||
|
tristate "Marvell Berlin USB PHY Driver"
|
||||||
|
depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
|
||||||
|
--- a/drivers/phy/Makefile
|
||||||
|
+++ b/drivers/phy/Makefile
|
||||||
|
@@ -4,6 +4,7 @@
|
||||||
|
|
||||||
|
obj-$(CONFIG_GENERIC_PHY) += phy-core.o
|
||||||
|
obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o
|
||||||
|
+obj-$(CONFIG_PHY_BCM_NS_USB3) += phy-bcm-ns-usb3.o
|
||||||
|
obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
|
||||||
|
obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
|
||||||
|
obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/drivers/phy/phy-bcm-ns-usb3.c
|
||||||
|
@@ -0,0 +1,274 @@
|
||||||
|
+/*
|
||||||
|
+ * Broadcom Northstar USB 3.0 PHY Driver
|
||||||
|
+ *
|
||||||
|
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
|
||||||
|
+ *
|
||||||
|
+ * All magic values used for initialization (and related comments) were obtained
|
||||||
|
+ * from Broadcom's SDK:
|
||||||
|
+ * Copyright (c) Broadcom Corp, 2012
|
||||||
|
+ *
|
||||||
|
+ * This program is free software; you can redistribute it and/or modify
|
||||||
|
+ * it under the terms of the GNU General Public License version 2 as
|
||||||
|
+ * published by the Free Software Foundation.
|
||||||
|
+ */
|
||||||
|
+
|
||||||
|
+#include <linux/bcma/bcma.h>
|
||||||
|
+#include <linux/delay.h>
|
||||||
|
+#include <linux/err.h>
|
||||||
|
+#include <linux/module.h>
|
||||||
|
+#include <linux/of_platform.h>
|
||||||
|
+#include <linux/platform_device.h>
|
||||||
|
+#include <linux/phy/phy.h>
|
||||||
|
+#include <linux/slab.h>
|
||||||
|
+
|
||||||
|
+#define BCM_NS_USB3_MII_MNG_TIMEOUT_US 1000 /* usecs */
|
||||||
|
+
|
||||||
|
+enum bcm_ns_family {
|
||||||
|
+ BCM_NS_UNKNOWN,
|
||||||
|
+ BCM_NS_AX,
|
||||||
|
+ BCM_NS_BX,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+struct bcm_ns_usb3 {
|
||||||
|
+ struct device *dev;
|
||||||
|
+ enum bcm_ns_family family;
|
||||||
|
+ void __iomem *dmp;
|
||||||
|
+ void __iomem *ccb_mii;
|
||||||
|
+ struct phy *phy;
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static const struct of_device_id bcm_ns_usb3_id_table[] = {
|
||||||
|
+ {
|
||||||
|
+ .compatible = "brcm,ns-ax-usb3-phy",
|
||||||
|
+ .data = (int *)BCM_NS_AX,
|
||||||
|
+ },
|
||||||
|
+ {
|
||||||
|
+ .compatible = "brcm,ns-bx-usb3-phy",
|
||||||
|
+ .data = (int *)BCM_NS_BX,
|
||||||
|
+ },
|
||||||
|
+ {},
|
||||||
|
+};
|
||||||
|
+MODULE_DEVICE_TABLE(of, bcm_ns_usb3_id_table);
|
||||||
|
+
|
||||||
|
+static int bcm_ns_usb3_wait_reg(struct bcm_ns_usb3 *usb3, void __iomem *addr,
|
||||||
|
+ u32 mask, u32 value, unsigned long timeout)
|
||||||
|
+{
|
||||||
|
+ unsigned long deadline = jiffies + timeout;
|
||||||
|
+ u32 val;
|
||||||
|
+
|
||||||
|
+ do {
|
||||||
|
+ val = readl(addr);
|
||||||
|
+ if ((val & mask) == value)
|
||||||
|
+ return 0;
|
||||||
|
+ cpu_relax();
|
||||||
|
+ udelay(10);
|
||||||
|
+ } while (!time_after_eq(jiffies, deadline));
|
||||||
|
+
|
||||||
|
+ dev_err(usb3->dev, "Timeout waiting for register %p\n", addr);
|
||||||
|
+
|
||||||
|
+ return -EBUSY;
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+static inline int bcm_ns_usb3_mii_mng_wait_idle(struct bcm_ns_usb3 *usb3)
|
||||||
|
+{
|
||||||
|
+ return bcm_ns_usb3_wait_reg(usb3, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL,
|
||||||
|
+ 0x0100, 0x0000,
|
||||||
|
+ usecs_to_jiffies(BCM_NS_USB3_MII_MNG_TIMEOUT_US));
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+static int bcm_ns_usb3_mii_mng_write32(struct bcm_ns_usb3 *usb3, u32 value)
|
||||||
|
+{
|
||||||
|
+ int err;
|
||||||
|
+
|
||||||
|
+ err = bcm_ns_usb3_mii_mng_wait_idle(usb3);
|
||||||
|
+ if (err < 0) {
|
||||||
|
+ dev_err(usb3->dev, "Couldn't write 0x%08x value\n", value);
|
||||||
|
+ return err;
|
||||||
|
+ }
|
||||||
|
+
|
||||||
|
+ writel(value, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA);
|
||||||
|
+
|
||||||
|
+ return 0;
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3)
|
||||||
|
+{
|
||||||
|
+ int err;
|
||||||
|
+
|
||||||
|
+ /* Enable MDIO. Setting MDCDIV as 26 */
|
||||||
|
+ writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL);
|
||||||
|
+
|
||||||
|
+ /* Wait for MDIO? */
|
||||||
|
+ udelay(2);
|
||||||
|
+
|
||||||
|
+ /* USB3 PLL Block */
|
||||||
|
+ err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000);
|
||||||
|
+ if (err < 0)
|
||||||
|
+ return err;
|
||||||
|
+
|
||||||
|
+ /* Assert Ana_Pllseq start */
|
||||||
|
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x58061000);
|
||||||
|
+
|
||||||
|
+ /* Assert CML Divider ratio to 26 */
|
||||||
|
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400);
|
||||||
|
+
|
||||||
|
+ /* Asserting PLL Reset */
|
||||||
|
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x582ec000);
|
||||||
|
+
|
||||||
|
+ /* Deaaserting PLL Reset */
|
||||||
|
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x582e8000);
|
||||||
|
+
|
||||||
|
+ /* Waiting MII Mgt interface idle */
|
||||||
|
+ bcm_ns_usb3_mii_mng_wait_idle(usb3);
|
||||||
|
+
|
||||||
|
+ /* Deasserting USB3 system reset */
|
||||||
|
+ writel(0, usb3->dmp + BCMA_RESET_CTL);
|
||||||
|
+
|
||||||
|
+ /* PLL frequency monitor enable */
|
||||||
|
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x58069000);
|
||||||
|
+
|
||||||
|
+ /* PIPE Block */
|
||||||
|
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8060);
|
||||||
|
+
|
||||||
|
+ /* CMPMAX & CMPMINTH setting */
|
||||||
|
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x580af30d);
|
||||||
|
+
|
||||||
|
+ /* DEGLITCH MIN & MAX setting */
|
||||||
|
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x580e6302);
|
||||||
|
+
|
||||||
|
+ /* TXPMD block */
|
||||||
|
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040);
|
||||||
|
+
|
||||||
|
+ /* Enabling SSC */
|
||||||
|
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003);
|
||||||
|
+
|
||||||
|
+ /* Waiting MII Mgt interface idle */
|
||||||
|
+ bcm_ns_usb3_mii_mng_wait_idle(usb3);
|
||||||
|
+
|
||||||
|
+ return 0;
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+static int bcm_ns_usb3_phy_init_ns_ax(struct bcm_ns_usb3 *usb3)
|
||||||
|
+{
|
||||||
|
+ int err;
|
||||||
|
+
|
||||||
|
+ /* Enable MDIO. Setting MDCDIV as 26 */
|
||||||
|
+ writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL);
|
||||||
|
+
|
||||||
|
+ /* Wait for MDIO? */
|
||||||
|
+ udelay(2);
|
||||||
|
+
|
||||||
|
+ /* PLL30 block */
|
||||||
|
+ err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000);
|
||||||
|
+ if (err < 0)
|
||||||
|
+ return err;
|
||||||
|
+
|
||||||
|
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400);
|
||||||
|
+
|
||||||
|
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x587e80e0);
|
||||||
|
+
|
||||||
|
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x580a009c);
|
||||||
|
+
|
||||||
|
+ /* Enable SSC */
|
||||||
|
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040);
|
||||||
|
+
|
||||||
|
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x580a21d3);
|
||||||
|
+
|
||||||
|
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003);
|
||||||
|
+
|
||||||
|
+ /* Waiting MII Mgt interface idle */
|
||||||
|
+ bcm_ns_usb3_mii_mng_wait_idle(usb3);
|
||||||
|
+
|
||||||
|
+ /* Deasserting USB3 system reset */
|
||||||
|
+ writel(0, usb3->dmp + BCMA_RESET_CTL);
|
||||||
|
+
|
||||||
|
+ return 0;
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+static int bcm_ns_usb3_phy_init(struct phy *phy)
|
||||||
|
+{
|
||||||
|
+ struct bcm_ns_usb3 *usb3 = phy_get_drvdata(phy);
|
||||||
|
+ int err;
|
||||||
|
+
|
||||||
|
+ /* Perform USB3 system soft reset */
|
||||||
|
+ writel(BCMA_RESET_CTL_RESET, usb3->dmp + BCMA_RESET_CTL);
|
||||||
|
+
|
||||||
|
+ switch (usb3->family) {
|
||||||
|
+ case BCM_NS_AX:
|
||||||
|
+ err = bcm_ns_usb3_phy_init_ns_ax(usb3);
|
||||||
|
+ break;
|
||||||
|
+ case BCM_NS_BX:
|
||||||
|
+ err = bcm_ns_usb3_phy_init_ns_bx(usb3);
|
||||||
|
+ break;
|
||||||
|
+ default:
|
||||||
|
+ WARN_ON(1);
|
||||||
|
+ err = -ENOTSUPP;
|
||||||
|
+ }
|
||||||
|
+
|
||||||
|
+ return err;
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+static const struct phy_ops ops = {
|
||||||
|
+ .init = bcm_ns_usb3_phy_init,
|
||||||
|
+ .owner = THIS_MODULE,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static int bcm_ns_usb3_probe(struct platform_device *pdev)
|
||||||
|
+{
|
||||||
|
+ struct device *dev = &pdev->dev;
|
||||||
|
+ const struct of_device_id *of_id;
|
||||||
|
+ struct bcm_ns_usb3 *usb3;
|
||||||
|
+ struct resource *res;
|
||||||
|
+ struct phy_provider *phy_provider;
|
||||||
|
+
|
||||||
|
+ usb3 = devm_kzalloc(dev, sizeof(*usb3), GFP_KERNEL);
|
||||||
|
+ if (!usb3)
|
||||||
|
+ return -ENOMEM;
|
||||||
|
+
|
||||||
|
+ usb3->dev = dev;
|
||||||
|
+
|
||||||
|
+ of_id = of_match_device(bcm_ns_usb3_id_table, dev);
|
||||||
|
+ if (!of_id)
|
||||||
|
+ return -EINVAL;
|
||||||
|
+ usb3->family = (enum bcm_ns_family)of_id->data;
|
||||||
|
+
|
||||||
|
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmp");
|
||||||
|
+ usb3->dmp = devm_ioremap_resource(dev, res);
|
||||||
|
+ if (IS_ERR(usb3->dmp)) {
|
||||||
|
+ dev_err(dev, "Failed to map DMP regs\n");
|
||||||
|
+ return PTR_ERR(usb3->dmp);
|
||||||
|
+ }
|
||||||
|
+
|
||||||
|
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ccb-mii");
|
||||||
|
+ usb3->ccb_mii = devm_ioremap_resource(dev, res);
|
||||||
|
+ if (IS_ERR(usb3->ccb_mii)) {
|
||||||
|
+ dev_err(dev, "Failed to map ChipCommon B MII regs\n");
|
||||||
|
+ return PTR_ERR(usb3->ccb_mii);
|
||||||
|
+ }
|
||||||
|
+
|
||||||
|
+ usb3->phy = devm_phy_create(dev, NULL, &ops);
|
||||||
|
+ if (IS_ERR(usb3->phy)) {
|
||||||
|
+ dev_err(dev, "Failed to create PHY\n");
|
||||||
|
+ return PTR_ERR(usb3->phy);
|
||||||
|
+ }
|
||||||
|
+
|
||||||
|
+ phy_set_drvdata(usb3->phy, usb3);
|
||||||
|
+ platform_set_drvdata(pdev, usb3);
|
||||||
|
+
|
||||||
|
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
|
||||||
|
+ if (!IS_ERR(phy_provider))
|
||||||
|
+ dev_info(dev, "Registered Broadcom Northstar USB 3.0 PHY driver\n");
|
||||||
|
+
|
||||||
|
+ return PTR_ERR_OR_ZERO(phy_provider);
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+static struct platform_driver bcm_ns_usb3_driver = {
|
||||||
|
+ .probe = bcm_ns_usb3_probe,
|
||||||
|
+ .driver = {
|
||||||
|
+ .name = "bcm_ns_usb3",
|
||||||
|
+ .of_match_table = bcm_ns_usb3_id_table,
|
||||||
|
+ },
|
||||||
|
+};
|
||||||
|
+module_platform_driver(bcm_ns_usb3_driver);
|
||||||
|
+
|
||||||
|
+MODULE_LICENSE("GPL v2");
|
||||||
Loading…
Reference in New Issue