mirror of https://github.com/hak5/openwrt.git
ar71xx: add support for the D-Link DIR-825 rev. B1 board (thanks to ValXdater)
SVN-Revision: 18621lede-17.01
parent
8a7e19e7db
commit
e4d21e0399
|
@ -0,0 +1,16 @@
|
||||||
|
config interface loopback
|
||||||
|
option ifname lo
|
||||||
|
option proto static
|
||||||
|
option ipaddr 127.0.0.1
|
||||||
|
option netmask 255.0.0.0
|
||||||
|
|
||||||
|
config interface lan
|
||||||
|
option ifname eth0
|
||||||
|
option type bridge
|
||||||
|
option proto static
|
||||||
|
option ipaddr 192.168.1.1
|
||||||
|
option netmask 255.255.255.0
|
||||||
|
|
||||||
|
config interface wan
|
||||||
|
option ifname eth1
|
||||||
|
option proto dhcp
|
|
@ -42,6 +42,9 @@ get_status_led() {
|
||||||
bullet-m | rocket-m | nano-m)
|
bullet-m | rocket-m | nano-m)
|
||||||
status_led="ubnt:green:link4"
|
status_led="ubnt:green:link4"
|
||||||
;;
|
;;
|
||||||
|
dir825b1)
|
||||||
|
status_led="dir825b1:orange:power"
|
||||||
|
;;
|
||||||
ls-sr71)
|
ls-sr71)
|
||||||
status_led="ubnt:green:d22"
|
status_led="ubnt:green:d22"
|
||||||
;;
|
;;
|
||||||
|
|
|
@ -19,6 +19,9 @@ ar71xx_board_name() {
|
||||||
*AW-NR580)
|
*AW-NR580)
|
||||||
name="aw-nr580"
|
name="aw-nr580"
|
||||||
;;
|
;;
|
||||||
|
*DIR825B1)
|
||||||
|
name="dir825b1"
|
||||||
|
;;
|
||||||
*"Bullet M")
|
*"Bullet M")
|
||||||
name="bullet-m"
|
name="bullet-m"
|
||||||
;;
|
;;
|
||||||
|
|
|
@ -68,7 +68,7 @@ platform_check_image() {
|
||||||
[ "$ARGC" -gt 1 ] && return 1
|
[ "$ARGC" -gt 1 ] && return 1
|
||||||
|
|
||||||
case "$board" in
|
case "$board" in
|
||||||
ap83 | mzk-w04nu | mzk-w300nh | tew-632brp | wrt-400n | bullet-m | nano-m | rocket-m)
|
ap83 | dir825b1 | mzk-w04nu | mzk-w300nh | tew-632brp | wrt-400n | bullet-m | nano-m | rocket-m)
|
||||||
[ "$magic" != "2705" ] && {
|
[ "$magic" != "2705" ] && {
|
||||||
echo "Invalid image type."
|
echo "Invalid image type."
|
||||||
return 1
|
return 1
|
||||||
|
|
|
@ -6,6 +6,7 @@ CONFIG_AG71XX=y
|
||||||
CONFIG_AR71XX_MACH_AP81=y
|
CONFIG_AR71XX_MACH_AP81=y
|
||||||
CONFIG_AR71XX_MACH_AP83=y
|
CONFIG_AR71XX_MACH_AP83=y
|
||||||
CONFIG_AR71XX_MACH_AW_NR580=y
|
CONFIG_AR71XX_MACH_AW_NR580=y
|
||||||
|
CONFIG_AR71XX_MACH_DIR825B1=y
|
||||||
CONFIG_AR71XX_MACH_GENERIC=y
|
CONFIG_AR71XX_MACH_GENERIC=y
|
||||||
CONFIG_AR71XX_MACH_MZK_W04NU=y
|
CONFIG_AR71XX_MACH_MZK_W04NU=y
|
||||||
CONFIG_AR71XX_MACH_MZK_W300NH=y
|
CONFIG_AR71XX_MACH_MZK_W300NH=y
|
||||||
|
|
|
@ -7,6 +7,7 @@ CONFIG_AG71XX=y
|
||||||
CONFIG_AR71XX_MACH_AP81=y
|
CONFIG_AR71XX_MACH_AP81=y
|
||||||
CONFIG_AR71XX_MACH_AP83=y
|
CONFIG_AR71XX_MACH_AP83=y
|
||||||
CONFIG_AR71XX_MACH_AW_NR580=y
|
CONFIG_AR71XX_MACH_AW_NR580=y
|
||||||
|
CONFIG_AR71XX_MACH_DIR825B1=y
|
||||||
CONFIG_AR71XX_MACH_GENERIC=y
|
CONFIG_AR71XX_MACH_GENERIC=y
|
||||||
CONFIG_AR71XX_MACH_MZK_W04NU=y
|
CONFIG_AR71XX_MACH_MZK_W04NU=y
|
||||||
CONFIG_AR71XX_MACH_MZK_W300NH=y
|
CONFIG_AR71XX_MACH_MZK_W300NH=y
|
||||||
|
|
|
@ -10,6 +10,10 @@ config AR71XX_MACH_AP83
|
||||||
bool "Atheros AP83 board support"
|
bool "Atheros AP83 board support"
|
||||||
default y
|
default y
|
||||||
|
|
||||||
|
config AR71XX_MACH_DIR825B1
|
||||||
|
bool "D-Link DIR-825 rev. B1 board support"
|
||||||
|
default y
|
||||||
|
|
||||||
config AR71XX_MACH_PB42
|
config AR71XX_MACH_PB42
|
||||||
bool "Atheros PB42 board support"
|
bool "Atheros PB42 board support"
|
||||||
default y
|
default y
|
||||||
|
|
|
@ -16,6 +16,7 @@ obj-$(CONFIG_PCI) += pci.o
|
||||||
obj-$(CONFIG_AR71XX_MACH_AP81) += mach-ap81.o
|
obj-$(CONFIG_AR71XX_MACH_AP81) += mach-ap81.o
|
||||||
obj-$(CONFIG_AR71XX_MACH_AP83) += mach-ap83.o
|
obj-$(CONFIG_AR71XX_MACH_AP83) += mach-ap83.o
|
||||||
obj-$(CONFIG_AR71XX_MACH_AW_NR580) += mach-aw-nr580.o
|
obj-$(CONFIG_AR71XX_MACH_AW_NR580) += mach-aw-nr580.o
|
||||||
|
obj-$(CONFIG_AR71XX_MACH_DIR825B1) += mach-dir825b1.o
|
||||||
obj-$(CONFIG_AR71XX_MACH_GENERIC) += mach-generic.o
|
obj-$(CONFIG_AR71XX_MACH_GENERIC) += mach-generic.o
|
||||||
obj-$(CONFIG_AR71XX_MACH_MZK_W04NU) += mach-mzk-w04nu.o
|
obj-$(CONFIG_AR71XX_MACH_MZK_W04NU) += mach-mzk-w04nu.o
|
||||||
obj-$(CONFIG_AR71XX_MACH_MZK_W300NH) += mach-mzk-w300nh.o
|
obj-$(CONFIG_AR71XX_MACH_MZK_W300NH) += mach-mzk-w300nh.o
|
||||||
|
|
|
@ -0,0 +1,317 @@
|
||||||
|
/*
|
||||||
|
* D-Link DIR-825 rev. B1 board support
|
||||||
|
*
|
||||||
|
* Copyright (C) 2009 Lukas Kuna, Evkanet, s.r.o.
|
||||||
|
*
|
||||||
|
* based on mach-wndr3700.c
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify it
|
||||||
|
* under the terms of the GNU General Public License version 2 as published
|
||||||
|
* by the Free Software Foundation.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <linux/platform_device.h>
|
||||||
|
#include <linux/mtd/mtd.h>
|
||||||
|
#include <linux/mtd/partitions.h>
|
||||||
|
#include <linux/spi/spi.h>
|
||||||
|
#include <linux/spi/flash.h>
|
||||||
|
#include <linux/input.h>
|
||||||
|
|
||||||
|
#include <asm/mips_machine.h>
|
||||||
|
#include <asm/mach-ar71xx/ar71xx.h>
|
||||||
|
#include <asm/mach-ar71xx/pci.h>
|
||||||
|
|
||||||
|
#include <linux/pci.h>
|
||||||
|
#include <linux/ath9k_platform.h>
|
||||||
|
#include <linux/delay.h>
|
||||||
|
|
||||||
|
#include "devices.h"
|
||||||
|
|
||||||
|
|
||||||
|
#define DIR825B1_GPIO_LED_BLUE_USB 0
|
||||||
|
#define DIR825B1_GPIO_LED_ORANGE_POWER 1
|
||||||
|
#define DIR825B1_GPIO_LED_BLUE_POWER 2
|
||||||
|
#define DIR825B1_GPIO_LED_BLUE_POWERSAVE 4
|
||||||
|
#define DIR825B1_GPIO_LED_ORANGE_PLANET 6
|
||||||
|
#define DIR825B1_GPIO_LED_BLUE_PLANET 11
|
||||||
|
|
||||||
|
#define DIR825B1_GPIO_BTN_RESET 3
|
||||||
|
#define DIR825B1_GPIO_BTN_POWERSAVE 8
|
||||||
|
|
||||||
|
#define DIR825B1_BUTTONS_POLL_INTERVAL 20
|
||||||
|
|
||||||
|
|
||||||
|
#define DIR825B1_CAL_LOCATION_0 0xbf661000
|
||||||
|
#define DIR825B1_CAL_LOCATION_1 0xbf665000
|
||||||
|
|
||||||
|
#define DIR825B1_MAC_LOCATION_0 0x2ffa81b8
|
||||||
|
#define DIR825B1_MAC_LOCATION_1 0x2ffa8370
|
||||||
|
|
||||||
|
|
||||||
|
static struct ath9k_platform_data dir825b1_wmac0_data;
|
||||||
|
static struct ath9k_platform_data dir825b1_wmac1_data;
|
||||||
|
static char dir825b1_wmac0_mac[6];
|
||||||
|
static char dir825b1_wmac1_mac[6];
|
||||||
|
|
||||||
|
|
||||||
|
#ifdef CONFIG_MTD_PARTITIONS
|
||||||
|
static struct mtd_partition dir825b1_partitions[] = {
|
||||||
|
{
|
||||||
|
.name = "uboot",
|
||||||
|
.offset = 0,
|
||||||
|
.size = 0x040000,
|
||||||
|
.mask_flags = MTD_WRITEABLE,
|
||||||
|
} , {
|
||||||
|
.name = "config",
|
||||||
|
.offset = 0x040000,
|
||||||
|
.size = 0x010000,
|
||||||
|
.mask_flags = MTD_WRITEABLE,
|
||||||
|
} , {
|
||||||
|
.name = "firmware",
|
||||||
|
.offset = 0x050000,
|
||||||
|
.size = 0x610000,
|
||||||
|
} , {
|
||||||
|
.name = "caldata",
|
||||||
|
.offset = 0x660000,
|
||||||
|
.size = 0x010000,
|
||||||
|
.mask_flags = MTD_WRITEABLE,
|
||||||
|
}
|
||||||
|
};
|
||||||
|
#endif /* CONFIG_MTD_PARTITIONS */
|
||||||
|
|
||||||
|
|
||||||
|
static struct flash_platform_data dir825b1_flash_data = {
|
||||||
|
#ifdef CONFIG_MTD_PARTITIONS
|
||||||
|
.parts = dir825b1_partitions,
|
||||||
|
.nr_parts = ARRAY_SIZE(dir825b1_partitions),
|
||||||
|
#endif
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
static struct spi_board_info dir825b1_spi_info[] = {
|
||||||
|
{
|
||||||
|
.bus_num = 0,
|
||||||
|
.chip_select = 0,
|
||||||
|
.max_speed_hz = 25000000,
|
||||||
|
.modalias = "m25p80",
|
||||||
|
.platform_data = &dir825b1_flash_data,
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
static struct gpio_led dir825b1_leds_gpio[] __initdata = {
|
||||||
|
{
|
||||||
|
.name = "dir825b1:blue:usb",
|
||||||
|
.gpio = DIR825B1_GPIO_LED_BLUE_USB,
|
||||||
|
.active_low = 1,
|
||||||
|
}, {
|
||||||
|
.name = "dir825b1:orange:power",
|
||||||
|
.gpio = DIR825B1_GPIO_LED_ORANGE_POWER,
|
||||||
|
.active_low = 1,
|
||||||
|
}, {
|
||||||
|
.name = "dir825b1:blue:power",
|
||||||
|
.gpio = DIR825B1_GPIO_LED_BLUE_POWER,
|
||||||
|
.active_low = 1,
|
||||||
|
}, {
|
||||||
|
.name = "dir825b1:blue:powersave",
|
||||||
|
.gpio = DIR825B1_GPIO_LED_BLUE_POWERSAVE,
|
||||||
|
.active_low = 1,
|
||||||
|
}, {
|
||||||
|
.name = "dir825b1:orange:planet",
|
||||||
|
.gpio = DIR825B1_GPIO_LED_ORANGE_PLANET,
|
||||||
|
.active_low = 1,
|
||||||
|
}, {
|
||||||
|
.name = "dir825b1:blue:planet",
|
||||||
|
.gpio = DIR825B1_GPIO_LED_BLUE_PLANET,
|
||||||
|
.active_low = 1,
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
static struct gpio_button dir825b1_gpio_buttons[] __initdata = {
|
||||||
|
{
|
||||||
|
.desc = "reset",
|
||||||
|
.type = EV_KEY,
|
||||||
|
.code = BTN_0,
|
||||||
|
.threshold = 5,
|
||||||
|
.gpio = DIR825B1_GPIO_BTN_RESET,
|
||||||
|
.active_low = 1,
|
||||||
|
} , {
|
||||||
|
.desc = "powersave",
|
||||||
|
.type = EV_KEY,
|
||||||
|
.code = BTN_1,
|
||||||
|
.threshold = 5,
|
||||||
|
.gpio = DIR825B1_GPIO_BTN_POWERSAVE,
|
||||||
|
.active_low = 1,
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
#ifdef CONFIG_PCI
|
||||||
|
static struct ar71xx_pci_irq dir825b1_pci_irqs[] __initdata = {
|
||||||
|
{
|
||||||
|
.slot = 0,
|
||||||
|
.pin = 1,
|
||||||
|
.irq = AR71XX_PCI_IRQ_DEV0,
|
||||||
|
}, {
|
||||||
|
.slot = 1,
|
||||||
|
.pin = 1,
|
||||||
|
.irq = AR71XX_PCI_IRQ_DEV1,
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
static int dir825b1_pci_plat_dev_init(struct pci_dev *dev)
|
||||||
|
{
|
||||||
|
switch(PCI_SLOT(dev->devfn))
|
||||||
|
{
|
||||||
|
case 17:
|
||||||
|
dev->dev.platform_data = &dir825b1_wmac0_data;
|
||||||
|
break;
|
||||||
|
|
||||||
|
case 18:
|
||||||
|
dev->dev.platform_data = &dir825b1_wmac1_data;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
return(0);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
static void dir825b1_pci_fixup(struct pci_dev *dev)
|
||||||
|
{
|
||||||
|
void __iomem *mem;
|
||||||
|
u16 *cal_data;
|
||||||
|
u16 cmd;
|
||||||
|
u32 bar0;
|
||||||
|
u32 val;
|
||||||
|
|
||||||
|
if (ar71xx_mach != AR71XX_MACH_DIR825B1) return;
|
||||||
|
|
||||||
|
dir825b1_pci_plat_dev_init(dev);
|
||||||
|
cal_data = dev->dev.platform_data;
|
||||||
|
|
||||||
|
if (*cal_data != 0xa55a)
|
||||||
|
{
|
||||||
|
printk(KERN_ERR "PCI: no calibration data found for %s\n",
|
||||||
|
pci_name(dev));
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000);
|
||||||
|
if (!mem)
|
||||||
|
{
|
||||||
|
printk(KERN_ERR "PCI: ioremap error for device %s\n",
|
||||||
|
pci_name(dev));
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
printk(KERN_INFO "PCI: fixup device %s\n", pci_name(dev));
|
||||||
|
|
||||||
|
pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
|
||||||
|
|
||||||
|
/* Setup the PCI device to allow access to the internal registers */
|
||||||
|
pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, AR71XX_PCI_MEM_BASE);
|
||||||
|
pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
||||||
|
cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
|
||||||
|
pci_write_config_word(dev, PCI_COMMAND, cmd);
|
||||||
|
|
||||||
|
/* set pointer to first reg address */
|
||||||
|
cal_data += 3;
|
||||||
|
while (*cal_data != 0xffff)
|
||||||
|
{
|
||||||
|
u32 reg;
|
||||||
|
reg = *cal_data++;
|
||||||
|
val = *cal_data++;
|
||||||
|
val |= (*cal_data++) << 16;
|
||||||
|
|
||||||
|
__raw_writel(val, mem + reg);
|
||||||
|
udelay(100);
|
||||||
|
}
|
||||||
|
|
||||||
|
pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
|
||||||
|
dev->vendor = val & 0xffff;
|
||||||
|
dev->device = (val >> 16) & 0xffff;
|
||||||
|
|
||||||
|
pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
|
||||||
|
dev->revision = val & 0xff;
|
||||||
|
dev->class = val >> 8; /* upper 3 bytes */
|
||||||
|
|
||||||
|
pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
||||||
|
cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
|
||||||
|
pci_write_config_word(dev, PCI_COMMAND, cmd);
|
||||||
|
|
||||||
|
pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
|
||||||
|
|
||||||
|
iounmap(mem);
|
||||||
|
}
|
||||||
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID,
|
||||||
|
dir825b1_pci_fixup);
|
||||||
|
|
||||||
|
|
||||||
|
static void __init dir825b1_pci_init(void)
|
||||||
|
{
|
||||||
|
memcpy(dir825b1_wmac0_data.eeprom_data,
|
||||||
|
(u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0),
|
||||||
|
sizeof(dir825b1_wmac0_data.eeprom_data));
|
||||||
|
|
||||||
|
memcpy(dir825b1_wmac1_data.eeprom_data,
|
||||||
|
(u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1),
|
||||||
|
sizeof(dir825b1_wmac1_data.eeprom_data));
|
||||||
|
|
||||||
|
memcpy(dir825b1_wmac0_mac, (u8 *)KSEG1ADDR(DIR825B1_MAC_LOCATION_0), 6);
|
||||||
|
dir825b1_wmac0_data.macaddr = dir825b1_wmac0_mac;
|
||||||
|
memcpy(dir825b1_wmac1_mac, (u8 *)KSEG1ADDR(DIR825B1_MAC_LOCATION_1), 6);
|
||||||
|
dir825b1_wmac1_data.macaddr = dir825b1_wmac1_mac;
|
||||||
|
|
||||||
|
ar71xx_pci_plat_dev_init = dir825b1_pci_plat_dev_init;
|
||||||
|
ar71xx_pci_init(ARRAY_SIZE(dir825b1_pci_irqs), dir825b1_pci_irqs);
|
||||||
|
}
|
||||||
|
#else
|
||||||
|
static void __init dir825b1_pci_init(void) { }
|
||||||
|
#endif /* CONFIG_PCI */
|
||||||
|
|
||||||
|
|
||||||
|
static void __init dir825b1_setup(void)
|
||||||
|
{
|
||||||
|
u8 mac[6], i;
|
||||||
|
|
||||||
|
memcpy(mac, (u8*)KSEG1ADDR(DIR825B1_MAC_LOCATION_1), 6);
|
||||||
|
for(i = 5; i >= 3; i--)
|
||||||
|
if(++mac[i] != 0x00) break;
|
||||||
|
|
||||||
|
ar71xx_set_mac_base(mac);
|
||||||
|
|
||||||
|
ar71xx_add_device_mdio(0x0);
|
||||||
|
|
||||||
|
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
||||||
|
ar71xx_eth0_data.phy_mask = 0x1E;
|
||||||
|
ar71xx_eth0_data.speed = SPEED_1000;
|
||||||
|
ar71xx_eth0_data.duplex = DUPLEX_FULL;
|
||||||
|
ar71xx_eth0_pll_data.pll_1000 = 0x11110000;
|
||||||
|
|
||||||
|
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
||||||
|
ar71xx_eth1_data.phy_mask = 0xC0;
|
||||||
|
ar71xx_eth1_data.speed = SPEED_1000;
|
||||||
|
ar71xx_eth1_data.duplex = DUPLEX_FULL;
|
||||||
|
ar71xx_eth1_pll_data.pll_1000 = 0x11110000;
|
||||||
|
|
||||||
|
ar71xx_add_device_eth(0);
|
||||||
|
ar71xx_add_device_eth(1);
|
||||||
|
|
||||||
|
ar71xx_add_device_spi(NULL, dir825b1_spi_info,
|
||||||
|
ARRAY_SIZE(dir825b1_spi_info));
|
||||||
|
|
||||||
|
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio),
|
||||||
|
dir825b1_leds_gpio);
|
||||||
|
|
||||||
|
ar71xx_add_device_gpio_buttons(-1, DIR825B1_BUTTONS_POLL_INTERVAL,
|
||||||
|
ARRAY_SIZE(dir825b1_gpio_buttons),
|
||||||
|
dir825b1_gpio_buttons);
|
||||||
|
|
||||||
|
ar71xx_add_device_usb();
|
||||||
|
|
||||||
|
dir825b1_pci_init();
|
||||||
|
}
|
||||||
|
|
||||||
|
MIPS_MACHINE(AR71XX_MACH_DIR825B1, "D-Link DIR825B1", dir825b1_setup);
|
|
@ -58,6 +58,9 @@ static struct board_rec boards[] __initdata = {
|
||||||
}, {
|
}, {
|
||||||
.name = "AW-NR580",
|
.name = "AW-NR580",
|
||||||
.mach_type = AR71XX_MACH_AW_NR580,
|
.mach_type = AR71XX_MACH_AW_NR580,
|
||||||
|
}, {
|
||||||
|
.name = "DIR825B1",
|
||||||
|
.mach_type = AR71XX_MACH_DIR825B1,
|
||||||
}, {
|
}, {
|
||||||
.name = "TEW-632BRP",
|
.name = "TEW-632BRP",
|
||||||
.mach_type = AR71XX_MACH_TEW_632BRP,
|
.mach_type = AR71XX_MACH_TEW_632BRP,
|
||||||
|
|
|
@ -124,6 +124,7 @@ enum ar71xx_mach_type {
|
||||||
AR71XX_MACH_AP81, /* Atheros AP81 */
|
AR71XX_MACH_AP81, /* Atheros AP81 */
|
||||||
AR71XX_MACH_AP83, /* Atheros AP83 */
|
AR71XX_MACH_AP83, /* Atheros AP83 */
|
||||||
AR71XX_MACH_AW_NR580, /* AzureWave AW-NR580 */
|
AR71XX_MACH_AW_NR580, /* AzureWave AW-NR580 */
|
||||||
|
AR71XX_MACH_DIR825B1, /* D-Link DIR-825 rev. B1 */
|
||||||
AR71XX_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */
|
AR71XX_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */
|
||||||
AR71XX_MACH_RB_411U, /* MikroTik RouterBOARD 411U */
|
AR71XX_MACH_RB_411U, /* MikroTik RouterBOARD 411U */
|
||||||
AR71XX_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */
|
AR71XX_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */
|
||||||
|
|
|
@ -77,6 +77,23 @@ define Image/Build/WRT400N
|
||||||
fi; fi
|
fi; fi
|
||||||
endef
|
endef
|
||||||
|
|
||||||
|
dir825b1_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,1024k(kernel),5184k(rootfs),64k(caldata)ro,6208k@0x50000(firmware)
|
||||||
|
define Image/Build/DIR825B1
|
||||||
|
$(call PatchKernelLzma,$(2),$(3) $(dir825b1_mtdlayout))
|
||||||
|
$(call MkImageLzma,$(KDIR)/vmlinux-$(2).bin.lzma,$(call imgname,$(1),$(2)).bin)
|
||||||
|
if [ `stat -c%s "$(call imgname,$(1),$(2)).bin"` -gt 1048576 ]; then \
|
||||||
|
echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
|
||||||
|
rm -f $(call imgname,$(1),$(2)).bin; \
|
||||||
|
else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 5308416 ]; then \
|
||||||
|
echo "Warning: $(KDIR)/root.$(1) is too big"; \
|
||||||
|
rm -f $(call imgname,$(1),$(2)).bin; \
|
||||||
|
else \
|
||||||
|
dd if=$(KDIR)/root.$(1) of=$(call imgname,$(1),$(2)).bin bs=1k seek=1024; \
|
||||||
|
cp $(call imgname,$(1),$(2)).bin $(call imgname,$(1),$(2))-backup-loader.bin; \
|
||||||
|
echo -n "01AP94-AR7161-RT-080619-00" >> $(call imgname,$(1),$(2))-backup-loader.bin; \
|
||||||
|
fi; fi
|
||||||
|
endef
|
||||||
|
|
||||||
cameo_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,896k(kernel),2880k(rootfs),64k(art)ro,3776k@0x30000(firmware)
|
cameo_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,896k(kernel),2880k(rootfs),64k(art)ro,3776k@0x30000(firmware)
|
||||||
define Image/Build/Cameo
|
define Image/Build/Cameo
|
||||||
$(call PatchKernelLzma,$(2),$(3) $(cameo_mtdlayout))
|
$(call PatchKernelLzma,$(2),$(3) $(cameo_mtdlayout))
|
||||||
|
@ -268,6 +285,18 @@ define Image/Build/Template/WRT400N/jffs2-64k
|
||||||
$(call Image/Build/Template/WRT400N,jffs2-64k,$(1),$(2),$(3))
|
$(call Image/Build/Template/WRT400N,jffs2-64k,$(1),$(2),$(3))
|
||||||
endef
|
endef
|
||||||
|
|
||||||
|
define Image/Build/Template/DIR825B1
|
||||||
|
$(call Image/Build/DIR825B1,$(1),$(2),$(3),$(4))
|
||||||
|
endef
|
||||||
|
|
||||||
|
define Image/Build/Template/DIR825B1/squashfs
|
||||||
|
$(call Image/Build/Template/DIR825B1,squashfs,$(1),$(2),$(3))
|
||||||
|
endef
|
||||||
|
|
||||||
|
define Image/Build/Template/DIR825B1/jffs2-64k
|
||||||
|
$(call Image/Build/Template/DIR825B1,jffs2-64k,$(1),$(2),$(3))
|
||||||
|
endef
|
||||||
|
|
||||||
define Image/Build/Template/CyberTAN
|
define Image/Build/Template/CyberTAN
|
||||||
$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4))
|
$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4))
|
||||||
endef
|
endef
|
||||||
|
@ -453,6 +482,10 @@ define Image/Build/Profile/WRT400N
|
||||||
$(call Image/Build/Template/WRT400N/$(1),wrt400n,board=WRT400N)
|
$(call Image/Build/Template/WRT400N/$(1),wrt400n,board=WRT400N)
|
||||||
endef
|
endef
|
||||||
|
|
||||||
|
define Image/Build/Profile/DIR825B1
|
||||||
|
$(call Image/Build/Template/DIR825B1/$(1),dir825b1,board=DIR825B1)
|
||||||
|
endef
|
||||||
|
|
||||||
define Image/Build/Profile/WRT160NL
|
define Image/Build/Profile/WRT160NL
|
||||||
$(call Image/Build/Template/CyberTAN/$(1),wrt160nl,board=WRT160NL,1.00.01)
|
$(call Image/Build/Template/CyberTAN/$(1),wrt160nl,board=WRT160NL,1.00.01)
|
||||||
endef
|
endef
|
||||||
|
@ -461,6 +494,7 @@ define Image/Build/Profile/Default
|
||||||
$(call Image/Build/Profile/AP83,$(1))
|
$(call Image/Build/Profile/AP83,$(1))
|
||||||
$(call Image/Build/Profile/A02RBW300N,$(1))
|
$(call Image/Build/Profile/A02RBW300N,$(1))
|
||||||
$(call Image/Build/Profile/DIR615C1,$(1))
|
$(call Image/Build/Profile/DIR615C1,$(1))
|
||||||
|
$(call Image/Build/Profile/DIR825B1,$(1))
|
||||||
$(call Image/Build/Profile/MZKW04NU,$(1))
|
$(call Image/Build/Profile/MZKW04NU,$(1))
|
||||||
$(call Image/Build/Profile/MZKW300NH,$(1))
|
$(call Image/Build/Profile/MZKW300NH,$(1))
|
||||||
$(call Image/Build/Profile/TEW632BRP,$(1))
|
$(call Image/Build/Profile/TEW632BRP,$(1))
|
||||||
|
|
|
@ -15,3 +15,15 @@ define Profile/DIR615C1/Description
|
||||||
endef
|
endef
|
||||||
|
|
||||||
$(eval $(call Profile,DIR615C1))
|
$(eval $(call Profile,DIR615C1))
|
||||||
|
|
||||||
|
|
||||||
|
define Profile/DIR825B1
|
||||||
|
NAME:=D-Link DIR-825 rev. B1
|
||||||
|
PACKAGES:=kmod-ath9k hostapd-mini
|
||||||
|
endef
|
||||||
|
|
||||||
|
define Profile/DIR825B1/Description
|
||||||
|
Package set optimized for the D-Link DIR-825 rev. B1.
|
||||||
|
endef
|
||||||
|
|
||||||
|
$(eval $(call Profile,DIR825B1))
|
||||||
|
|
Loading…
Reference in New Issue