kernel: bump 4.19 to 4.19.85

Refreshed all patches.

Altered patches:
- 080-sata_support.patch

Remove upstreamed:
- 034-v4.20-MIPS-BCM47XX-Enable-USB-power-on-Netgear-WNDR3400v3.patch
- 001-4.21-01-BCM63XX-fix-switch-core-reset-on-BCM6368.patch
- 073-qcom-ipq4019-fix-cpu0-s-qcom-saw2-reg-value.patch

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
master
Koen Vandeputte 2019-11-21 14:09:35 +01:00
parent db9e9e8382
commit e29500eb84
20 changed files with 59 additions and 153 deletions

View File

@ -8,11 +8,11 @@ endif
LINUX_VERSION-4.9 = .202
LINUX_VERSION-4.14 = .155
LINUX_VERSION-4.19 = .84
LINUX_VERSION-4.19 = .85
LINUX_KERNEL_HASH-4.9.202 = 8108ec1cd10fc40821c84e9f087dba10b1767aad66596f4a36925faef55e4ebf
LINUX_KERNEL_HASH-4.14.155 = 77d61979556b81c95b81452fa10e1fe9368cbe2f9f80a13e4669b0464722e481
LINUX_KERNEL_HASH-4.19.84 = 868b4a92619cb00ab142a20a67f000525b9605820d1b66faa4a183133eac0660
LINUX_KERNEL_HASH-4.19.85 = 7bf435970aeeafd46263f49730087a61c4858d8b8fc5a4002ceac971b45f4fb7
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))

View File

@ -26,7 +26,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
/* Device and char device-related information */
static DEFINE_IDA(gpio_ida);
static dev_t gpio_devt;
@@ -2634,7 +2636,7 @@ int gpiod_direction_output(struct gpio_d
@@ -2654,7 +2656,7 @@ int gpiod_direction_output(struct gpio_d
value = !!value;
/* GPIOs used for IRQs shall not be set as output */
@ -35,7 +35,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
gpiod_err(desc,
"%s: tried to set a GPIO tied to an IRQ as output\n",
__func__);
@@ -3333,7 +3335,7 @@ int gpiochip_lock_as_irq(struct gpio_chi
@@ -3353,7 +3355,7 @@ int gpiochip_lock_as_irq(struct gpio_chi
}
}

View File

@ -37,7 +37,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
static int lan78xx_read_reg(struct lan78xx_net *dev, u32 index, u32 *data)
{
u32 *buf = kmalloc(sizeof(u32), GFP_KERNEL);
@@ -3006,8 +3015,14 @@ static int lan78xx_bind(struct lan78xx_n
@@ -3011,8 +3020,14 @@ static int lan78xx_bind(struct lan78xx_n
if (DEFAULT_RX_CSUM_ENABLE)
dev->net->features |= NETIF_F_RXCSUM;

View File

@ -28,7 +28,7 @@ See: https://github.com/raspberrypi/linux/issues/2447
static int lan78xx_read_reg(struct lan78xx_net *dev, u32 index, u32 *data)
{
u32 *buf = kmalloc(sizeof(u32), GFP_KERNEL);
@@ -3819,7 +3824,12 @@ static int lan78xx_probe(struct usb_inte
@@ -3824,7 +3829,12 @@ static int lan78xx_probe(struct usb_inte
dev->pipe_intr = usb_rcvintpipe(dev->udev,
dev->ep_intr->desc.bEndpointAddress &
USB_ENDPOINT_NUMBER_MASK);

View File

@ -12,7 +12,7 @@ in both dwc_otg and in ipv6 processing.
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -3253,7 +3253,7 @@ static int rx_submit(struct lan78xx_net
@@ -3258,7 +3258,7 @@ static int rx_submit(struct lan78xx_net
size_t size = dev->rx_urb_size;
int ret = 0;

View File

@ -20,7 +20,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -286,6 +286,8 @@ int bcmgenet_mii_probe(struct net_device
@@ -285,6 +285,8 @@ int bcmgenet_mii_probe(struct net_device
/* Communicate the integrated PHY revision */
if (priv->internal_phy)
phy_flags = priv->gphy_rev;

View File

@ -41,7 +41,7 @@ Signed-off-by: Mark Brown <broonie@kernel.org>
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -3959,8 +3959,23 @@ struct gpio_desc *__must_check gpiod_get
@@ -3979,8 +3979,23 @@ struct gpio_desc *__must_check gpiod_get
* the device name as label
*/
status = gpiod_request(desc, con_id ? con_id : devname);

View File

@ -23,7 +23,7 @@ Signed-off-by: Mark Brown <broonie@kernel.org>
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -4033,6 +4033,8 @@ struct gpio_desc *gpiod_get_from_of_node
@@ -4053,6 +4053,8 @@ struct gpio_desc *gpiod_get_from_of_node
transitory = flags & OF_GPIO_TRANSITORY;
ret = gpiod_request(desc, label);

View File

@ -1,48 +0,0 @@
From feef7918667b84f9d5653c501542dd8d84ae32af Mon Sep 17 00:00:00 2001
From: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Date: Sun, 19 Aug 2018 22:20:23 +0300
Subject: [PATCH] MIPS: BCM47XX: Enable USB power on Netgear WNDR3400v3
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Setting GPIO 21 high seems to be required to enable power to USB ports
on the WNDR3400v3. As there is already similar code for WNR3500L,
make the existing USB power GPIO code generic and use that.
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20259/
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
---
arch/mips/bcm47xx/workarounds.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/arch/mips/bcm47xx/workarounds.c
+++ b/arch/mips/bcm47xx/workarounds.c
@@ -5,9 +5,8 @@
#include <bcm47xx_board.h>
#include <bcm47xx.h>
-static void __init bcm47xx_workarounds_netgear_wnr3500l(void)
+static void __init bcm47xx_workarounds_enable_usb_power(int usb_power)
{
- const int usb_power = 12;
int err;
err = gpio_request_one(usb_power, GPIOF_OUT_INIT_HIGH, "usb_power");
@@ -23,7 +22,10 @@ void __init bcm47xx_workarounds(void)
switch (board) {
case BCM47XX_BOARD_NETGEAR_WNR3500L:
- bcm47xx_workarounds_netgear_wnr3500l();
+ bcm47xx_workarounds_enable_usb_power(12);
+ break;
+ case BCM47XX_BOARD_NETGEAR_WNDR3400_V3:
+ bcm47xx_workarounds_enable_usb_power(21);
break;
default:
/* No workaround(s) needed */

View File

@ -1,26 +0,0 @@
From f1af8bb8e0879a3c2d9679a7274c2774335e9876 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jonas.gorski@gmail.com>
Date: Wed, 14 Nov 2018 12:06:41 +0100
Subject: [PATCH] MIPS: BCM63XX: fix switch core reset on BCM6368
The Ethernet Switch core mask was set to 0, causing the switch core to
be not reset on BCM6368 on boot. Provide the proper mask so the switch
core gets reset to a known good state.
Fixes: 799faa626c71 ("MIPS: BCM63XX: add core reset helper")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
---
arch/mips/bcm63xx/reset.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/bcm63xx/reset.c
+++ b/arch/mips/bcm63xx/reset.c
@@ -120,7 +120,7 @@
#define BCM6368_RESET_DSL 0
#define BCM6368_RESET_SAR SOFTRESET_6368_SAR_MASK
#define BCM6368_RESET_EPHY SOFTRESET_6368_EPHY_MASK
-#define BCM6368_RESET_ENETSW 0
+#define BCM6368_RESET_ENETSW SOFTRESET_6368_ENETSW_MASK
#define BCM6368_RESET_PCM SOFTRESET_6368_PCM_MASK
#define BCM6368_RESET_MPI SOFTRESET_6368_MPI_MASK
#define BCM6368_RESET_PCIE 0

View File

@ -1,6 +1,6 @@
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
@@ -1633,7 +1633,7 @@ static int bcm_enet_change_mtu(struct ne
@@ -1634,7 +1634,7 @@ static int bcm_enet_change_mtu(struct ne
return -EBUSY;
/* add ethernet header + vlan tag size */

View File

@ -15,7 +15,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
@@ -866,10 +866,8 @@ static int bcm_enet_open(struct net_devi
@@ -867,10 +867,8 @@ static int bcm_enet_open(struct net_devi
struct bcm_enet_priv *priv;
struct sockaddr addr;
struct device *kdev;
@ -26,7 +26,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
void *p;
u32 val;
@@ -877,40 +875,10 @@ static int bcm_enet_open(struct net_devi
@@ -878,40 +876,10 @@ static int bcm_enet_open(struct net_devi
kdev = &priv->pdev->dev;
if (priv->has_phy) {
@ -68,7 +68,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
}
/* mask all interrupts and request them */
@@ -920,7 +888,7 @@ static int bcm_enet_open(struct net_devi
@@ -921,7 +889,7 @@ static int bcm_enet_open(struct net_devi
ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
if (ret)
@ -77,7 +77,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
ret = request_irq(priv->irq_rx, bcm_enet_isr_dma, 0,
dev->name, dev);
@@ -1082,8 +1050,8 @@ static int bcm_enet_open(struct net_devi
@@ -1083,8 +1051,8 @@ static int bcm_enet_open(struct net_devi
enet_dmac_writel(priv, priv->dma_chan_int_mask,
ENETDMAC_IRMASK, priv->tx_chan);
@ -88,7 +88,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
else
bcm_enet_adjust_link(dev);
@@ -1124,10 +1092,6 @@ out_freeirq_rx:
@@ -1125,10 +1093,6 @@ out_freeirq_rx:
out_freeirq:
free_irq(dev->irq, dev);
@ -99,7 +99,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
return ret;
}
@@ -1232,10 +1196,6 @@ static int bcm_enet_stop(struct net_devi
@@ -1233,10 +1197,6 @@ static int bcm_enet_stop(struct net_devi
free_irq(priv->irq_rx, dev);
free_irq(dev->irq, dev);
@ -110,7 +110,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
return 0;
}
@@ -1801,14 +1761,47 @@ static int bcm_enet_probe(struct platfor
@@ -1802,14 +1762,47 @@ static int bcm_enet_probe(struct platfor
/* do minimal hardware init to be able to probe mii bus */
bcm_enet_hw_preinit(priv);
@ -159,7 +159,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
}
bus = priv->mii_bus;
@@ -1832,6 +1825,35 @@ static int bcm_enet_probe(struct platfor
@@ -1833,6 +1826,35 @@ static int bcm_enet_probe(struct platfor
dev_err(&pdev->dev, "unable to register mdio bus\n");
goto out_free_mdio;
}
@ -195,7 +195,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
} else {
/* run platform code to initialize PHY device */
@@ -1839,45 +1861,16 @@ static int bcm_enet_probe(struct platfor
@@ -1840,45 +1862,16 @@ static int bcm_enet_probe(struct platfor
pd->mii_config(dev, 1, bcm_enet_mdio_read_mii,
bcm_enet_mdio_write_mii)) {
dev_err(&pdev->dev, "unable to configure mdio bus\n");
@ -245,7 +245,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
if (priv->mii_bus)
mdiobus_unregister(priv->mii_bus);
@@ -1885,6 +1878,9 @@ out_free_mdio:
@@ -1886,6 +1879,9 @@ out_free_mdio:
if (priv->mii_bus)
mdiobus_free(priv->mii_bus);
@ -255,7 +255,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
out_uninit_hw:
/* turn off mdc clock */
enet_writel(priv, 0, ENET_MIISC_REG);
@@ -1915,6 +1911,7 @@ static int bcm_enet_remove(struct platfo
@@ -1916,6 +1912,7 @@ static int bcm_enet_remove(struct platfo
enet_writel(priv, 0, ENET_MIISC_REG);
if (priv->has_phy) {

View File

@ -32,7 +32,7 @@ Subject: [PATCH 54/81] bcm63xx_enet: enable rgmii clock on external ports
#define ENETSW_MDIOC_EXT_MASK (1 << 16)
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
@@ -2184,6 +2184,18 @@ static int bcm_enetsw_open(struct net_de
@@ -2185,6 +2185,18 @@ static int bcm_enetsw_open(struct net_de
priv->sw_port_link[i] = 0;
}

View File

@ -20,7 +20,7 @@
#include <bcm63xx_dev_enet.h>
#include "bcm63xx_enet.h"
@@ -1931,7 +1932,8 @@ static int bcm_enet_remove(struct platfo
@@ -1932,7 +1933,8 @@ static int bcm_enet_remove(struct platfo
return 0;
}
@ -30,7 +30,7 @@
.probe = bcm_enet_probe,
.remove = bcm_enet_remove,
.driver = {
@@ -1940,6 +1942,42 @@ struct platform_driver bcm63xx_enet_driv
@@ -1941,6 +1943,42 @@ struct platform_driver bcm63xx_enet_driv
},
};
@ -73,7 +73,7 @@
/*
* switch mii access callbacks
*/
@@ -2196,29 +2234,6 @@ static int bcm_enetsw_open(struct net_de
@@ -2197,29 +2235,6 @@ static int bcm_enetsw_open(struct net_de
enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
}
@ -103,7 +103,7 @@
/* initialize flow control buffer allocation */
enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
ENETDMA_BUFALLOC_REG(priv->rx_chan));
@@ -2674,6 +2689,9 @@ static int bcm_enetsw_probe(struct platf
@@ -2675,6 +2690,9 @@ static int bcm_enetsw_probe(struct platf
struct bcm63xx_enetsw_platform_data *pd;
struct resource *res_mem;
int ret, irq_rx, irq_tx;
@ -113,7 +113,7 @@
if (!bcm_enet_shared_base[0])
return -EPROBE_DEFER;
@@ -2754,6 +2772,43 @@ static int bcm_enetsw_probe(struct platf
@@ -2755,6 +2773,43 @@ static int bcm_enetsw_probe(struct platf
priv->pdev = pdev;
priv->net_dev = dev;
@ -157,7 +157,7 @@
return 0;
out_disable_clk:
@@ -2775,6 +2830,9 @@ static int bcm_enetsw_remove(struct plat
@@ -2776,6 +2831,9 @@ static int bcm_enetsw_remove(struct plat
priv = netdev_priv(dev);
unregister_netdev(dev);

View File

@ -1,6 +1,6 @@
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
@@ -2733,9 +2733,9 @@ static int bcm_enetsw_probe(struct platf
@@ -2734,9 +2734,9 @@ static int bcm_enetsw_probe(struct platf
if (ret)
goto out;

View File

@ -1,6 +1,6 @@
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
@@ -2231,6 +2231,10 @@ static int bcm_enetsw_open(struct net_de
@@ -2232,6 +2232,10 @@ static int bcm_enetsw_open(struct net_de
rgmii_ctrl = enetsw_readb(priv, ENETSW_RGMII_CTRL_REG(i));
rgmii_ctrl |= ENETSW_RGMII_CTRL_GMII_CLK_EN;

View File

@ -1,6 +1,6 @@
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -37,12 +37,23 @@ static struct scsi_host_template ahci_pl
@@ -44,11 +44,18 @@ static struct scsi_host_template ahci_pl
AHCI_SHT(DRV_NAME),
};
@ -15,12 +15,26 @@
{
struct device *dev = &pdev->dev;
struct ahci_host_priv *hpriv;
+ const struct ata_port_info *info = &ahci_port_info;
- const struct ata_port_info *port;
+ const struct ata_port_info *port = &ahci_port_info;
int rc;
+ if (IS_ENABLED(CONFIG_ARCH_CNS3XXX))
+ info = &cns3xxx_port_info;
+
hpriv = ahci_platform_get_resources(pdev,
AHCI_PLATFORM_GET_RESETS);
if (IS_ERR(hpriv))
@@ -66,9 +73,14 @@ static int ahci_probe(struct platform_de
if (of_device_is_compatible(dev->of_node, "hisilicon,hisi-ahci"))
hpriv->flags |= AHCI_HFLAG_NO_FBS | AHCI_HFLAG_NO_NCQ;
- port = acpi_device_get_match_data(dev);
- if (!port)
- port = &ahci_port_info;
+ if (IS_ENABLED(CONFIG_ARCH_CNS3XXX)) {
+ port = &cns3xxx_port_info;
+ }
+ else {
+ port = acpi_device_get_match_data(dev);
+ if (!port)
+ port = &ahci_port_info;
+ }
rc = ahci_platform_init_host(pdev, hpriv, port,
&ahci_platform_sht);

View File

@ -506,7 +506,7 @@ Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
+MODULE_ALIAS("nf-flow-table-hw");
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -5471,6 +5471,13 @@ static int nf_tables_flowtable_parse_hoo
@@ -5473,6 +5473,13 @@ static int nf_tables_flowtable_parse_hoo
if (err < 0)
return err;
@ -520,7 +520,7 @@ Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ops = kcalloc(n, sizeof(struct nf_hook_ops), GFP_KERNEL);
if (!ops)
return -ENOMEM;
@@ -5602,10 +5609,19 @@ static int nf_tables_newflowtable(struct
@@ -5604,10 +5611,19 @@ static int nf_tables_newflowtable(struct
}
flowtable->data.type = type;
@ -540,7 +540,7 @@ Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
err = nf_tables_flowtable_parse_hook(&ctx, nla[NFTA_FLOWTABLE_HOOK],
flowtable);
if (err < 0)
@@ -5731,7 +5747,8 @@ static int nf_tables_fill_flowtable_info
@@ -5733,7 +5749,8 @@ static int nf_tables_fill_flowtable_info
nla_put_string(skb, NFTA_FLOWTABLE_NAME, flowtable->name) ||
nla_put_be32(skb, NFTA_FLOWTABLE_USE, htonl(flowtable->use)) ||
nla_put_be64(skb, NFTA_FLOWTABLE_HANDLE, cpu_to_be64(flowtable->handle),

View File

@ -1,34 +0,0 @@
From bd73a3dd257fb838bd456a18eeee0ef0224b7a40 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@gmail.com>
Date: Wed, 25 Jul 2018 10:37:47 +0200
Subject: [PATCH] ARM: dts: qcom: ipq4019: fix cpu0's qcom,saw2 reg value
while compiling an ipq4019 target, dtc will complain:
regulator@b089000 unit address format error, expected "2089000"
The saw0 regulator reg value seems to be
copied and pasted from qcom-ipq8064.dtsi.
This patch fixes the reg value to match that of the
unit address which in turn silences the warning.
(There is no driver for qcom,saw2 right now.
So this went unnoticed)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -325,7 +325,7 @@
saw0: regulator@b089000 {
compatible = "qcom,saw2";
- reg = <0x02089000 0x1000>, <0x0b009000 0x1000>;
+ reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
regulator;
};

View File

@ -362,7 +362,7 @@
return err;
}
@@ -1125,34 +1126,6 @@ static int mtk_pcie_request_resources(st
@@ -1127,34 +1128,6 @@ static int mtk_pcie_request_resources(st
return 0;
}
@ -397,7 +397,7 @@
static int mtk_pcie_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1179,7 +1152,14 @@ static int mtk_pcie_probe(struct platfor
@@ -1181,7 +1154,14 @@ static int mtk_pcie_probe(struct platfor
if (err)
goto put_resources;
@ -413,7 +413,7 @@
if (err)
goto put_resources;
@@ -1192,6 +1172,80 @@ put_resources:
@@ -1194,6 +1174,80 @@ put_resources:
return err;
}
@ -494,7 +494,7 @@
static const struct mtk_pcie_soc mtk_pcie_soc_v1 = {
.ops = &mtk_pcie_ops,
.startup = mtk_pcie_startup_port,
@@ -1220,10 +1274,13 @@ static const struct of_device_id mtk_pci
@@ -1222,10 +1276,13 @@ static const struct of_device_id mtk_pci
static struct platform_driver mtk_pcie_driver = {
.probe = mtk_pcie_probe,