ar71xx: add support for COMFAST CF-E355AC v2

COMFAST CF-E355AC v2 is a ceiling mount AP with PoE support, based on
Qualcomm/Atheros QCA9531 + QCA9886.

Short specification:

- 2x 10/100 Mbps Ethernet, with PoE support
- 128MB of RAM (DDR2)
- 16 MB of FLASH
- 2T2R 2.4 GHz, 802.11b/g/n
- 2T2R 5 GHz, 802.11ac/n/a, WAVE 2
- built-in 4x 3 dBi antennas
- output power (max): 500 mW (27 dBm)
- 1x RGB LED, 1x button
- built-in watchdog chipset

Flash instruction:

Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.

Signed-off-by: Ding Tengfei <dtf@comfast.cn>
[updated kernel config for both boards]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
openwrt-18.06
Ding Tengfei 2018-01-22 14:57:57 +08:00 committed by Piotr Dymacz
parent b1d57dadb2
commit e07014e70b
8 changed files with 29 additions and 3 deletions

View File

@ -216,6 +216,11 @@ cf-e375ac)
ucidef_set_led_wlan "wlan1" "WLAN" "comfast:blue:wlan" "phy1tpt"
;;
cf-e355ac|\
cf-e355ac-v2)
ucidef_set_led_netdev "lan" "LAN" "cf-e355ac:green:lan" "eth0"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "cf-e355ac:blue:wlan2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "cf-e355ac:red:wlan5g" "phy0tpt"
;;
cf-e380ac-v1|\
cf-e380ac-v2)
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"

View File

@ -155,6 +155,7 @@ case "$FIRMWARE" in
archer-c58-v1|\
archer-c59-v1|\
archer-c60-v1|\
cf-e355ac-v2|\
cf-e375ac)
ath10kcal_extract "art" 20480 12064
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \

View File

@ -519,6 +519,9 @@ ar71xx_board_detect() {
*"CF-E355AC")
name="cf-e355ac"
;;
*"CF-E355AC v2")
name="cf-e355ac-v2"
;;
*"CF-E375AC")
name="cf-e375ac"
;;

View File

@ -209,6 +209,7 @@ platform_check_image() {
cf-e316n-v2|\
cf-e320n-v2|\
cf-e355ac|\
cf-e355ac-v2|\
cf-e375ac|\
cf-e380ac-v1|\
cf-e380ac-v2|\

View File

@ -2176,11 +2176,14 @@ config ATH79_MACH_CF_E320N_V2
select ATH79_DEV_WMAC
config ATH79_MACH_CF_E355AC
bool "COMFAST CF-E355AC support"
bool "COMFAST CF-E355AC v1/v2 support"
select SOC_QCA953X
select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_CF_E375AC

View File

@ -2,7 +2,8 @@
* Support for COMFAST boards:
* - CF-E316N v2 (AR9341)
* - CF-E320N v2 (QCA9531)
* - CF-E355AC (QCA9531)
* - CF-E355AC (QCA9531 + QCA9882)
* - CF-E355AC v2 (QCA9531 + QCA9886)
* - CF-E375AC (QCA9563 + QCA9886 + QCA8337)
* - CF-E380AC v1/v2 (QCA9558)
* - CF-E520N/CF-E530N (QCA9531)
@ -481,6 +482,9 @@ static void __init cf_e355ac_setup(void)
MIPS_MACHINE(ATH79_MACH_CF_E355AC, "CF-E355AC", "COMFAST CF-E355AC",
cf_e355ac_setup);
MIPS_MACHINE(ATH79_MACH_CF_E355AC_V2, "CF-E355AC-V2", "COMFAST CF-E355AC v2",
cf_e355ac_setup);
static void __init cf_e375ac_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f040000);

View File

@ -64,6 +64,7 @@ enum ath79_mach_type {
ATH79_MACH_CF_E316N_V2, /* COMFAST CF-E316N v2 */
ATH79_MACH_CF_E320N_V2, /* COMFAST CF-E320N v2 */
ATH79_MACH_CF_E355AC, /* COMFAST CF-E355AC */
ATH79_MACH_CF_E355AC_V2, /* COMFAST CF-E355AC v2*/
ATH79_MACH_CF_E375AC, /* COMFAST CF-E375AC */
ATH79_MACH_CF_E380AC_V1, /* COMFAST CF-E380AC v1 */
ATH79_MACH_CF_E380AC_V2, /* COMFAST CF-E380AC v2 */

View File

@ -203,6 +203,14 @@ define Device/cf-e355ac
endef
TARGET_DEVICES += cf-e355ac
define Device/cf-e355ac-v2
$(Device/cf-e355ac)
DEVICE_TITLE := COMFAST CF-E355AC v2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca9888
BOARDNAME := CF-E355AC-V2
endef
TARGET_DEVICES += cf-e355ac-v2
define Device/cf-e375ac
DEVICE_TITLE := COMFAST CF-E375AC
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9888