x86: Move USB support from subtargets to target config

All x86 subtargets enable USB support, so it makes sense to enable it
in the target config instead, to avoid duplication.

Also refresh subtarget configs accordingly.

Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>

target/linux/x86/64/config-default

@@ -150,7 +150,6 @@ CONFIG_HAVE_LIVEPATCH=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_HAVE_STACK_VALIDATION=y
 CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HID=y
 CONFIG_HID_BATTERY_STRENGTH=y
 CONFIG_HID_GENERIC=y
 CONFIG_HID_HYPERV_MOUSE=y
@@ -278,16 +277,8 @@ CONFIG_TREE_RCU=y
 CONFIG_UCS2_STRING=y
 CONFIG_UCSI=y
 # CONFIG_UNISYSSPAR is not set
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_EHCI_PCI=y
-CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PCI=y
-# CONFIG_USB_OHCI_HCD_PLATFORM is not set
 CONFIG_USB_STORAGE=y
-CONFIG_USB_UHCI_HCD=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_PCI=y
 # CONFIG_USB_XHCI_PLATFORM is not set

target/linux/x86/config-4.9

@@ -216,9 +216,7 @@ CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_HAVE_UID16=y
 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
 CONFIG_HAVE_USER_RETURN_NOTIFIER=y
-CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
-CONFIG_USB_HID=y
-CONFIG_USB_HIDDEV=y
 CONFIG_HIGHMEM=y
 # CONFIG_HIGHMEM4G is not set
 CONFIG_HIGHMEM64G=y
@@ -402,7 +400,17 @@ CONFIG_THREAD_INFO_IN_TASK=y
 CONFIG_TICK_CPU_ACCOUNTING=y
 # CONFIG_TOSHIBA is not set
 CONFIG_UP_LATE_INIT=y
+CONFIG_USB=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_HCD_PLATFORM is not set
+CONFIG_USB_EHCI_PCI=y
+CONFIG_USB_HID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PLATFORM is not set
 CONFIG_USB_SUPPORT=y
+CONFIG_USB_UHCI_HCD=y
 # CONFIG_USERIO is not set
 # CONFIG_USER_NS is not set
 CONFIG_USER_STACKTRACE_SUPPORT=y

target/linux/x86/generic/config-default

@@ -154,7 +154,6 @@ CONFIG_HAVE_KVM_IRQ_ROUTING=y
 CONFIG_HAVE_KVM_MSI=y
 CONFIG_HDMI=y
 CONFIG_HIBERNATE_CALLBACKS=y
-CONFIG_HID=y
 CONFIG_HID_BATTERY_STRENGTH=y
 CONFIG_HOTPLUG_CPU=y
 CONFIG_HPET=y
@@ -306,15 +305,7 @@ CONFIG_TASK_DELAY_ACCT=y
 # CONFIG_TOSHIBA_BT_RFKILL is not set
 CONFIG_TREE_RCU=y
 CONFIG_UCS2_STRING=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_EHCI_PCI=y
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_HCD_PLATFORM is not set
 CONFIG_USB_STORAGE=y
-CONFIG_USB_UHCI_HCD=y
 CONFIG_USER_RETURN_NOTIFIER=y
 CONFIG_VGACON_SOFT_SCROLLBACK=y
 CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64

target/linux/x86/geode/config-default

@@ -59,7 +59,6 @@ CONFIG_GPIO_SYSFS=y
 # CONFIG_GPIO_WS16C48 is not set
 CONFIG_HAVE_ACPI_APEI=y
 CONFIG_HAVE_ACPI_APEI_NMI=y
-CONFIG_HID=y
 CONFIG_HIGHMEM4G=y
 # CONFIG_HIGHMEM64G is not set
 # CONFIG_HPET is not set
@@ -117,14 +116,7 @@ CONFIG_SENSORS_LM90=y
 CONFIG_SERIAL_8250_PNP=y
 # CONFIG_SURFACE_PRO3_BUTTON is not set
 # CONFIG_TOSHIBA_BT_RFKILL is not set
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_EHCI_PCI=y
-CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PCI=y
-# CONFIG_USB_OHCI_HCD_PLATFORM is not set
 # CONFIG_USB_UHCI_HCD is not set
 CONFIG_VGACON_SOFT_SCROLLBACK=y
 CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64

target/linux/x86/legacy/config-default

@@ -102,7 +102,6 @@ CONFIG_HAVE_ACPI_APEI_NMI=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_CLK_PREPARE=y
 CONFIG_HDMI=y
-CONFIG_HID=y
 CONFIG_HID_BATTERY_STRENGTH=y
 # CONFIG_HIGHMEM64G is not set
 CONFIG_HPET=y
@@ -185,15 +184,7 @@ CONFIG_SATA_AHCI=y
 CONFIG_SERIAL_8250_PNP=y
 # CONFIG_SURFACE_PRO3_BUTTON is not set
 # CONFIG_TOSHIBA_BT_RFKILL is not set
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_EHCI_PCI=y
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_HCD_PLATFORM is not set
 CONFIG_USB_STORAGE=y
-CONFIG_USB_UHCI_HCD=y
 CONFIG_VGACON_SOFT_SCROLLBACK=y
 CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
 # CONFIG_WDT is not set