kernel: update bcma and ssb to wireless-testing master-2014-12-05

This brings ssb and bcma to wireless-testing tag master-2014-12-05

In addition it also adds the ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-
axi-in-DTS-f.patch which adds the irq number in a way it is done in the
mainline kernel.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43544

target/linux/bcm53xx/patches-3.14/046-ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch

@@ -0,0 +1,58 @@
+From dec378827c4aaab6c46ecdd5fc2c3b3155d68743 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Wed, 24 Sep 2014 23:50:07 +0200
+Subject: [PATCH] ARM: BCM5301X: Add IRQs to Broadcom's bus-axi in DTS file
+
+IRQ support for Broadcom's bus-axi driver bcma was merged into John
+Linville's wireless tree and will show up in 3.19. This patch makes use
+of this feature in the DTS file for the the BCM5301X SoCs. I left the
+PCIe controller out, because this still needs some discussion.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/arm/boot/dts/bcm5301x.dtsi | 34 ++++++++++++++++++++++++++++++++++
+ 1 file changed, 34 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -101,6 +101,40 @@
+ 		#address-cells = <1>;
+ 		#size-cells = <1>;
+ 
++		#interrupt-cells = <1>;
++		interrupt-map-mask = <0x000fffff 0xffff>;
++		interrupt-map = 
++			/* ChipCommon */
++			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
++
++			/* USB 2.0 Controller */
++			<0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
++
++			/* USB 3.0 Controller */
++			<0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
++
++			/* Ethernet Controller 0 */
++			<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
++
++			/* Ethernet Controller 1 */
++			<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
++
++			/* Ethernet Controller 2 */
++			<0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
++
++			/* Ethernet Controller 3 */
++			<0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
++
++			/* NAND Controller */
++			<0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
++
+ 		chipcommon: chipcommon@0 {
+ 			reg = <0x00000000 0x1000>;
+ 

target/linux/bcm53xx/patches-3.14/047-ARM-BCM5301X-Add-buttons-for-Netgear-R6250.patch

@@ -13,8 +13,6 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  arch/arm/boot/dts/bcm5301x.dtsi             |  1 +
  2 files changed, 26 insertions(+)
 
-diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-index 58d999d..4ed7de1 100644
 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
 +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
 @@ -66,4 +66,29 @@
@@ -47,8 +45,6 @@ index 58d999d..4ed7de1 100644
 +		};
 +	};
  };
-diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
-index b7c4e9e..78aec62 100644
 --- a/arch/arm/boot/dts/bcm5301x.dtsi
 +++ b/arch/arm/boot/dts/bcm5301x.dtsi
 @@ -9,6 +9,7 @@
@@ -59,6 +55,3 @@ index b7c4e9e..78aec62 100644
  #include <dt-bindings/interrupt-controller/irq.h>
  #include <dt-bindings/interrupt-controller/arm-gic.h>
  #include "skeleton.dtsi"
--- 
-1.8.4.5
-

target/linux/bcm53xx/patches-3.14/121-bcma-get-irqs-from-dt.patch

@@ -1,38 +0,0 @@
-From 6611afa6c49434780096cdf2c1028f0ac277f9bc Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 9 Jan 2014 19:40:14 +0100
-Subject: [PATCH v3 2/2] bcma: get IRQ numbers from dt
-
-It is not possible to auto detect the irq numbers used by the cores on
-an arm SoC. If bcma was registered with device tree it will search for
-some device tree nodes with the irq number and add it to the core
-configuration.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/bcma/main.c | 49 ++++++++++++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 48 insertions(+), 1 deletion(-)
- 
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -10,6 +10,7 @@
- #include <linux/platform_device.h>
- #include <linux/bcma/bcma.h>
- #include <linux/slab.h>
-+#include <linux/of_irq.h>
- #include <linux/of_address.h>
- 
- MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
-@@ -159,8 +160,10 @@ static void bcma_of_fill_device(struct p
- 	struct device_node *node;
- 
- 	node = bcma_of_find_child_device(parent, core);
--	if (node)
--		core->dev.of_node = node;
-+	if (!node)
-+		return;
-+	core->dev.of_node = node;
-+	core->irq = irq_of_parse_and_map(node, 0);
- }
- #else
- static void bcma_of_fill_device(struct platform_device *parent,

target/linux/bcm53xx/patches-3.14/130-ARM-BCM5301X-register-bcma-bus.patch

@@ -9,7 +9,7 @@ Subject: [PATCH 07/17] ARM: BCM5301X: register bcma bus
 
 --- a/arch/arm/boot/dts/bcm5301x.dtsi
 +++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -94,18 +94,102 @@
+@@ -95,12 +95,23 @@
  		};
  	};
  
@@ -31,84 +31,36 @@ Subject: [PATCH 07/17] ARM: BCM5301X: register bcma bus
  		#size-cells = <1>;
 +		sprom = <&sprom0>;
  
- 		chipcommon: chipcommon@0 {
- 			reg = <0x00000000 0x1000>;
-+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ 		#interrupt-cells = <1>;
+ 		interrupt-map-mask = <0x000fffff 0xffff>;
+@@ -108,6 +119,30 @@
+ 			/* ChipCommon */
+ 			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
  
- 			gpio-controller;
- 			#gpio-cells = <2>;
- 		};
++			/* PCIe Controller 0 */
++			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 +
-+		pcie@12000 {
-+			reg = <0x00012000 0x1000>;
-+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
-+		};
++			/* PCIe Controller 1 */
++			<0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
 +
-+		pcie@13000 {
-+			reg = <0x00013000 0x1000>;
-+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-+		};
++			/* PCIe Controller 2 */
++			<0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
 +
-+		pcie@14000 {
-+			reg = <0x00014000 0x1000>;
-+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
-+		usb2@21000 {
-+			reg = <0x00021000 0x1000>;
-+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
-+		usb3@23000 {
-+			reg = <0x00023000 0x1000>;
-+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
-+		ethernet@24000 {
-+			reg = <0x00024000 0x1000>;
-+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
-+		ethernet@25000 {
-+			reg = <0x00025000 0x1000>;
-+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
-+		ethernet@26000 {
-+			reg = <0x00026000 0x1000>;
-+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
-+		ethernet@27000 {
-+			reg = <0x00027000 0x1000>;
-+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
-+		nand@28000 {
-+			reg = <0x00028000 0x1000>;
-+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-+		};
- 	};
- };
+ 			/* USB 2.0 Controller */
+ 			<0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+ 

target/linux/bcm53xx/patches-3.14/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch

@@ -17,7 +17,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 
 --- a/arch/arm/mach-bcm/Kconfig
 +++ b/arch/arm/mach-bcm/Kconfig
-@@ -46,6 +46,7 @@ config ARCH_BCM_5301X
+@@ -45,6 +45,7 @@ config ARCH_BCM_5301X
  	select ARM_GLOBAL_TIMER
  	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
  	select MIGHT_HAVE_PCI
@@ -120,7 +120,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 +	struct pci_sys_data *sys = pdev->sysdata;
 +	struct bcma_device *bdev = sys->private_data;
 +
-+	return bdev->irq;
++	return bcma_core_irq(bdev, 5);
 +}
 +
 +static u32 bcma_pcie2_cfg_base(struct bcma_device *bdev, int busno,

target/linux/bcm53xx/patches-3.14/304-ARM-BCM5301X-Switch-DT-files-to-gpio-keys-polled.patch

@@ -17,8 +17,6 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
  arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 2 +-
  5 files changed, 5 insertions(+), 5 deletions(-)
 
-diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-index 5fc0fae..583720e 100644
 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
 +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
 @@ -24,7 +24,7 @@
@@ -30,8 +28,6 @@ index 5fc0fae..583720e 100644
  		#address-cells = <1>;
  		#size-cells = <0>;
  		poll-interval = <200>;
-diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-index 05e80b1..70a1093 100644
 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
 +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
 @@ -68,7 +68,7 @@
@@ -43,8 +39,6 @@ index 05e80b1..70a1093 100644
  		#address-cells = <1>;
  		#size-cells = <0>;
  		poll-interval = <200>;
-diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-index 12fc2a0..ac299a2 100644
 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
 +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
 @@ -58,7 +58,7 @@
@@ -56,8 +50,6 @@ index 12fc2a0..ac299a2 100644
  		#address-cells = <1>;
  		#size-cells = <0>;
  		poll-interval = <200>;
-diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-index fb76378..934b244 100644
 --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
 +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
 @@ -58,7 +58,7 @@
@@ -69,8 +61,6 @@ index fb76378..934b244 100644
  		#address-cells = <1>;
  		#size-cells = <0>;
  		poll-interval = <200>;
-diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-index bbb414f..d2aefef 100644
 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
 +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
 @@ -24,7 +24,7 @@
@@ -82,6 +72,3 @@ index bbb414f..d2aefef 100644
  		#address-cells = <1>;
  		#size-cells = <0>;
  		poll-interval = <200>;
--- 
-1.8.4.5
-

target/linux/bcm53xx/patches-3.14/305-ARM-BCM5301X-Enable-ChipCommon-UART-serial-console.patch

@@ -14,8 +14,6 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
  arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 10 ++++++++++
  4 files changed, 40 insertions(+)
 
-diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-index 583720e..d472c36 100644
 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
 +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
 @@ -23,6 +23,16 @@
@@ -35,8 +33,6 @@ index 583720e..d472c36 100644
  	gpio-keys {
  		compatible = "gpio-keys-polled";
  		#address-cells = <1>;
-diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-index ac299a2..257d6da 100644
 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
 +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
 @@ -23,6 +23,16 @@
@@ -56,8 +52,6 @@ index ac299a2..257d6da 100644
  	leds {
  		compatible = "gpio-leds";
  
-diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-index 934b244..cad0e85 100644
 --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
 +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
 @@ -23,6 +23,16 @@
@@ -77,8 +71,6 @@ index 934b244..cad0e85 100644
  	leds {
  		compatible = "gpio-leds";
  
-diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-index d2aefef..f3a0326 100644
 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
 +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
 @@ -23,6 +23,16 @@
@@ -98,6 +90,3 @@ index d2aefef..f3a0326 100644
  	gpio-keys {
  		compatible = "gpio-keys-polled";
  		#address-cells = <1>;
--- 
-1.8.4.5
-

target/linux/bcm53xx/patches-3.14/320-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch

@@ -13,8 +13,6 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
  2 files changed, 37 insertions(+), 1 deletion(-)
  create mode 100644 arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
 
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 64c8f3f..41e8455 100644
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
 @@ -55,7 +55,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
@@ -27,9 +25,6 @@ index 64c8f3f..41e8455 100644
  dtb-$(CONFIG_ARCH_BERLIN) += \
  	berlin2-sony-nsz-gs7.dtb	\
  	berlin2cd-google-chromecast.dtb
-diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-new file mode 100644
-index 0000000..5e4b3a9
 --- /dev/null
 +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
 @@ -0,0 +1,35 @@
@@ -68,6 +63,3 @@ index 0000000..5e4b3a9
 +		};
 +	};
 +};
--- 
-1.8.4.5
-

target/linux/bcm53xx/patches-3.14/420-mtd-bcm5301x_nand.patch

@@ -22,7 +22,7 @@
  nand-objs := nand_base.o nand_bbt.o
 --- /dev/null
 +++ b/drivers/mtd/nand/bcm_nand.c
-@@ -0,0 +1,1591 @@
+@@ -0,0 +1,1590 @@
 +/*
 + * Nortstar NAND controller driver
 + * for Linux NAND library and MTD interface
@@ -1527,15 +1527,9 @@
 +static int bcmnand_probe(struct bcma_device *core)
 +{
 +	struct device *dev = &core->dev;
-+	struct device_node *np = dev->of_node;
 +	struct bcmnand_ctrl *ctrl;
 +	int res, i, irq;
 +
-+	if (!np) {
-+		pr_err("%s: no device tree node found\n", DRV_NAME);
-+		return -ENOENT;
-+	}
-+
 +	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
 +	if (!ctrl)
 +		return -ENOMEM;
@@ -1546,8 +1540,13 @@
 +	ctrl->core = core;
 +
 +	/* Acquire all interrupt lines */
-+	for (i = 0; i < of_irq_count(np); i++) {
-+		irq = irq_of_parse_and_map(np, i);
++	for (i = 0; i < NANDC_IRQ_NUM; i++) {
++		irq = bcma_core_irq(core, i);
++		if (!irq) {
++			pr_err("%s: IRQ no available irq: %i (idx: %i)\n",
++			       DRV_NAME, irq, i);
++			return res;
++		}
 +		res = devm_request_irq(dev, irq, bcmnand_isr, 0, DRV_NAME, ctrl);
 +		if (res < 0) {
 +			pr_err("%s: problem requesting irq: %i (idx: %i)\n",

target/linux/bcm53xx/patches-3.18/046-ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch

@@ -0,0 +1,58 @@
+From dec378827c4aaab6c46ecdd5fc2c3b3155d68743 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Wed, 24 Sep 2014 23:50:07 +0200
+Subject: [PATCH] ARM: BCM5301X: Add IRQs to Broadcom's bus-axi in DTS file
+
+IRQ support for Broadcom's bus-axi driver bcma was merged into John
+Linville's wireless tree and will show up in 3.19. This patch makes use
+of this feature in the DTS file for the the BCM5301X SoCs. I left the
+PCIe controller out, because this still needs some discussion.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/arm/boot/dts/bcm5301x.dtsi | 34 ++++++++++++++++++++++++++++++++++
+ 1 file changed, 34 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -101,6 +101,40 @@
+ 		#address-cells = <1>;
+ 		#size-cells = <1>;
+ 
++		#interrupt-cells = <1>;
++		interrupt-map-mask = <0x000fffff 0xffff>;
++		interrupt-map = 
++			/* ChipCommon */
++			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
++
++			/* USB 2.0 Controller */
++			<0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
++
++			/* USB 3.0 Controller */
++			<0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
++
++			/* Ethernet Controller 0 */
++			<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
++
++			/* Ethernet Controller 1 */
++			<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
++
++			/* Ethernet Controller 2 */
++			<0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
++
++			/* Ethernet Controller 3 */
++			<0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
++
++			/* NAND Controller */
++			<0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
++
+ 		chipcommon: chipcommon@0 {
+ 			reg = <0x00000000 0x1000>;
+ 

target/linux/bcm53xx/patches-3.18/060-bcma-make-it-possible-to-specify-a-IRQ-num-in-bcma_c.patch

@@ -1,162 +0,0 @@
-From f3bbc921543ad8098617a5a6a8054fab11878a25 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Wed, 1 Oct 2014 00:30:37 +0200
-Subject: [PATCH 1/3] bcma: make it possible to specify a IRQ num in
- bcma_core_irq()
-
-This moves bcma_core_irq() to main.c and add a extra parameter with a
-number so that we can return different irq number for devices with more
-than one.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/bcma/driver_chipcommon.c      |  2 +-
- drivers/bcma/driver_gpio.c            |  4 ++--
- drivers/bcma/driver_mips.c            | 11 ++---------
- drivers/bcma/driver_pci_host.c        |  4 ++--
- drivers/bcma/main.c                   | 22 ++++++++++++++++++++++
- include/linux/bcma/bcma.h             |  2 ++
- include/linux/bcma/bcma_driver_mips.h |  4 ++--
- 7 files changed, 33 insertions(+), 16 deletions(-)
-
---- a/drivers/bcma/driver_chipcommon.c
-+++ b/drivers/bcma/driver_chipcommon.c
-@@ -339,7 +339,7 @@ void bcma_chipco_serial_init(struct bcma
- 		return;
- 	}
- 
--	irq = bcma_core_irq(cc->core);
-+	irq = bcma_core_irq(cc->core, 0);
- 
- 	/* Determine the registers of the UARTs */
- 	cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
---- a/drivers/bcma/driver_gpio.c
-+++ b/drivers/bcma/driver_gpio.c
-@@ -152,7 +152,7 @@ static int bcma_gpio_irq_domain_init(str
- 					 handle_simple_irq);
- 	}
- 
--	hwirq = bcma_core_irq(cc->core);
-+	hwirq = bcma_core_irq(cc->core, 0);
- 	err = request_irq(hwirq, bcma_gpio_irq_handler, IRQF_SHARED, "gpio",
- 			  cc);
- 	if (err)
-@@ -183,7 +183,7 @@ static void bcma_gpio_irq_domain_exit(st
- 		return;
- 
- 	bcma_cc_mask32(cc, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO);
--	free_irq(bcma_core_irq(cc->core), cc);
-+	free_irq(bcma_core_irq(cc->core, 0), cc);
- 	for (gpio = 0; gpio < chip->ngpio; gpio++) {
- 		int irq = irq_find_mapping(cc->irq_domain, gpio);
- 
---- a/drivers/bcma/driver_mips.c
-+++ b/drivers/bcma/driver_mips.c
-@@ -115,7 +115,7 @@ static u32 bcma_core_mips_irqflag(struct
-  * If disabled, 5 is returned.
-  * If not supported, 6 is returned.
-  */
--static unsigned int bcma_core_mips_irq(struct bcma_device *dev)
-+unsigned int bcma_core_mips_irq(struct bcma_device *dev)
- {
- 	struct bcma_device *mdev = dev->bus->drv_mips.core;
- 	u32 irqflag;
-@@ -133,13 +133,6 @@ static unsigned int bcma_core_mips_irq(s
- 	return 5;
- }
- 
--unsigned int bcma_core_irq(struct bcma_device *dev)
--{
--	unsigned int mips_irq = bcma_core_mips_irq(dev);
--	return mips_irq <= 4 ? mips_irq + 2 : 0;
--}
--EXPORT_SYMBOL(bcma_core_irq);
--
- static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
- {
- 	unsigned int oldirq = bcma_core_mips_irq(dev);
-@@ -423,7 +416,7 @@ void bcma_core_mips_init(struct bcma_drv
- 		break;
- 	default:
- 		list_for_each_entry(core, &bus->cores, list) {
--			core->irq = bcma_core_irq(core);
-+			core->irq = bcma_core_irq(core, 0);
- 		}
- 		bcma_err(bus,
- 			 "Unknown device (0x%x) found, can not configure IRQs\n",
---- a/drivers/bcma/driver_pci_host.c
-+++ b/drivers/bcma/driver_pci_host.c
-@@ -593,7 +593,7 @@ int bcma_core_pci_plat_dev_init(struct p
- 	pr_info("PCI: Fixing up device %s\n", pci_name(dev));
- 
- 	/* Fix up interrupt lines */
--	dev->irq = bcma_core_irq(pc_host->pdev->core);
-+	dev->irq = bcma_core_irq(pc_host->pdev->core, 0);
- 	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
- 
- 	readrq = pcie_get_readrq(dev);
-@@ -617,6 +617,6 @@ int bcma_core_pci_pcibios_map_irq(const
- 
- 	pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
- 			       pci_ops);
--	return bcma_core_irq(pc_host->pdev->core);
-+	return bcma_core_irq(pc_host->pdev->core, 0);
- }
- EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -169,6 +169,28 @@ static void bcma_of_fill_device(struct p
- }
- #endif /* CONFIG_OF */
- 
-+unsigned int bcma_core_irq(struct bcma_device *core, int num)
-+{
-+	struct bcma_bus *bus = core->bus;
-+	unsigned int mips_irq;
-+
-+	switch (bus->hosttype) {
-+	case BCMA_HOSTTYPE_PCI:
-+		return bus->host_pci->irq;
-+	case BCMA_HOSTTYPE_SOC:
-+		if (bus->drv_mips.core && num == 0) {
-+			mips_irq = bcma_core_mips_irq(core);
-+			return mips_irq <= 4 ? mips_irq + 2 : 0;
-+		}
-+		break;
-+	case BCMA_HOSTTYPE_SDIO:
-+		return 0;
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(bcma_core_irq);
-+
- void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
- {
- 	core->dev.release = bcma_release_core_dev;
---- a/include/linux/bcma/bcma.h
-+++ b/include/linux/bcma/bcma.h
-@@ -447,4 +447,6 @@ extern u32 bcma_chipco_pll_read(struct b
- #define  BCMA_DMA_TRANSLATION_DMA64_CMT	0x80000000 /* Client Mode Translation for 64-bit DMA */
- extern u32 bcma_core_dma_translation(struct bcma_device *core);
- 
-+extern unsigned int bcma_core_irq(struct bcma_device *core, int num);
-+
- #endif /* LINUX_BCMA_H_ */
---- a/include/linux/bcma/bcma_driver_mips.h
-+++ b/include/linux/bcma/bcma_driver_mips.h
-@@ -43,12 +43,12 @@ struct bcma_drv_mips {
- extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
- extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
- 
--extern unsigned int bcma_core_irq(struct bcma_device *core);
-+extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
- #else
- static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
- static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
- 
--static inline unsigned int bcma_core_irq(struct bcma_device *core)
-+static inline unsigned int bcma_core_mips_irq(struct bcma_device *dev)
- {
- 	return 0;
- }

target/linux/bcm53xx/patches-3.18/061-bcma-get-IRQ-numbers-from-dt.patch

@@ -1,141 +0,0 @@
-From 4eb6a1fd46965ed6c3fb9327276eb53a3021eaaa Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 9 Jan 2014 19:40:14 +0100
-Subject: [PATCH 3/3] bcma: get IRQ numbers from dt
-
-It is not possible to auto detect the irq numbers used by the cores on
-an arm SoC. If bcma was registered with device tree it will search for
-some device tree nodes with the irq number and add it to the core
-configuration.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- Documentation/devicetree/bindings/bus/bcma.txt | 21 +++++++++++
- drivers/bcma/main.c                            | 52 +++++++++++++++++++++++++-
- 2 files changed, 72 insertions(+), 1 deletion(-)
-
---- a/Documentation/devicetree/bindings/bus/bcma.txt
-+++ b/Documentation/devicetree/bindings/bus/bcma.txt
-@@ -8,6 +8,11 @@ Required properties:
- 
- The cores on the AXI bus are automatically detected by bcma with the
- memory ranges they are using and they get registered afterwards.
-+Automatic detection of the IRQ number is not working on
-+BCM47xx/BCM53xx ARM SoCs. To assign IRQ numbers to the cores, provide
-+them manually through device tree. Use an interrupt-map to specify the
-+IRQ used by the devices on the bus. The first address is just an index,
-+because we do not have any special register.
- 
- The top-level axi bus may contain children representing attached cores
- (devices). This is needed since some hardware details can't be auto
-@@ -22,6 +27,22 @@ Example:
- 		ranges = <0x00000000 0x18000000 0x00100000>;
- 		#address-cells = <1>;
- 		#size-cells = <1>;
-+		#interrupt-cells = <1>;
-+		interrupt-map-mask = <0x000fffff 0xffff>;
-+		interrupt-map =
-+			/* Ethernet Controller 0 */
-+			<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-+
-+			/* Ethernet Controller 1 */
-+			<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-+
-+			/* PCIe Controller 0 */
-+			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
- 
- 		chipcommon {
- 			reg = <0x00000000 0x1000>;
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -11,6 +11,7 @@
- #include <linux/bcma/bcma.h>
- #include <linux/slab.h>
- #include <linux/of_address.h>
-+#include <linux/of_irq.h>
- 
- MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
- MODULE_LICENSE("GPL");
-@@ -153,6 +154,46 @@ static struct device_node *bcma_of_find_
- 	return NULL;
- }
- 
-+static int bcma_of_irq_parse(struct platform_device *parent,
-+			     struct bcma_device *core,
-+			     struct of_phandle_args *out_irq, int num)
-+{
-+	__be32 laddr[1];
-+	int rc;
-+
-+	if (core->dev.of_node) {
-+		rc = of_irq_parse_one(core->dev.of_node, num, out_irq);
-+		if (!rc)
-+			return rc;
-+	}
-+
-+	out_irq->np = parent->dev.of_node;
-+	out_irq->args_count = 1;
-+	out_irq->args[0] = num;
-+
-+	laddr[0] = cpu_to_be32(core->addr);
-+	return of_irq_parse_raw(laddr, out_irq);
-+}
-+
-+static unsigned int bcma_of_get_irq(struct platform_device *parent,
-+				    struct bcma_device *core, int num)
-+{
-+	struct of_phandle_args out_irq;
-+	int ret;
-+
-+	if (!parent || !parent->dev.of_node)
-+		return 0;
-+
-+	ret = bcma_of_irq_parse(parent, core, &out_irq, num);
-+	if (ret) {
-+		bcma_debug(core->bus, "bcma_of_get_irq() failed with rc=%d\n",
-+			   ret);
-+		return 0;
-+	}
-+
-+	return irq_create_of_mapping(&out_irq);
-+}
-+
- static void bcma_of_fill_device(struct platform_device *parent,
- 				struct bcma_device *core)
- {
-@@ -161,12 +202,19 @@ static void bcma_of_fill_device(struct p
- 	node = bcma_of_find_child_device(parent, core);
- 	if (node)
- 		core->dev.of_node = node;
-+
-+	core->irq = bcma_of_get_irq(parent, core, 0);
- }
- #else
- static void bcma_of_fill_device(struct platform_device *parent,
- 				struct bcma_device *core)
- {
- }
-+static inline unsigned int bcma_of_get_irq(struct platform_device *parent,
-+					   struct bcma_device *core, int num)
-+{
-+	return 0;
-+}
- #endif /* CONFIG_OF */
- 
- unsigned int bcma_core_irq(struct bcma_device *core, int num)
-@@ -182,7 +230,9 @@ unsigned int bcma_core_irq(struct bcma_d
- 			mips_irq = bcma_core_mips_irq(core);
- 			return mips_irq <= 4 ? mips_irq + 2 : 0;
- 		}
--		break;
-+		if (bus->host_pdev)
-+			return bcma_of_get_irq(bus->host_pdev, core, num);
-+		return 0;
- 	case BCMA_HOSTTYPE_SDIO:
- 		return 0;
- 	}

target/linux/bcm53xx/patches-3.18/130-ARM-BCM5301X-register-bcma-bus.patch

@@ -9,7 +9,7 @@ Subject: [PATCH 07/17] ARM: BCM5301X: register bcma bus
 
 --- a/arch/arm/boot/dts/bcm5301x.dtsi
 +++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -95,18 +95,102 @@
+@@ -95,12 +95,23 @@
  		};
  	};
  
@@ -31,84 +31,36 @@ Subject: [PATCH 07/17] ARM: BCM5301X: register bcma bus
  		#size-cells = <1>;
 +		sprom = <&sprom0>;
  
- 		chipcommon: chipcommon@0 {
- 			reg = <0x00000000 0x1000>;
-+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ 		#interrupt-cells = <1>;
+ 		interrupt-map-mask = <0x000fffff 0xffff>;
+@@ -108,6 +119,30 @@
+ 			/* ChipCommon */
+ 			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
  
- 			gpio-controller;
- 			#gpio-cells = <2>;
- 		};
++			/* PCIe Controller 0 */
++			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 +
-+		pcie@12000 {
-+			reg = <0x00012000 0x1000>;
-+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
-+		};
++			/* PCIe Controller 1 */
++			<0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
 +
-+		pcie@13000 {
-+			reg = <0x00013000 0x1000>;
-+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-+		};
++			/* PCIe Controller 2 */
++			<0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
 +
-+		pcie@14000 {
-+			reg = <0x00014000 0x1000>;
-+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
-+		usb2@21000 {
-+			reg = <0x00021000 0x1000>;
-+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
-+		usb3@23000 {
-+			reg = <0x00023000 0x1000>;
-+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
-+		ethernet@24000 {
-+			reg = <0x00024000 0x1000>;
-+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
-+		ethernet@25000 {
-+			reg = <0x00025000 0x1000>;
-+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
-+		ethernet@26000 {
-+			reg = <0x00026000 0x1000>;
-+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
-+		ethernet@27000 {
-+			reg = <0x00027000 0x1000>;
-+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
-+		nand@28000 {
-+			reg = <0x00028000 0x1000>;
-+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-+		};
- 	};
- };
+ 			/* USB 2.0 Controller */
+ 			<0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+ 

target/linux/bcm53xx/patches-3.18/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch

@@ -120,7 +120,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 +	struct pci_sys_data *sys = pdev->sysdata;
 +	struct bcma_device *bdev = sys->private_data;
 +
-+	return bdev->irq;
++	return bcma_core_irq(bdev, 5);
 +}
 +
 +static u32 bcma_pcie2_cfg_base(struct bcma_device *bdev, int busno,

target/linux/bcm53xx/patches-3.18/420-mtd-bcm5301x_nand.patch

@@ -22,7 +22,7 @@
  nand-objs := nand_base.o nand_bbt.o nand_timings.o
 --- /dev/null
 +++ b/drivers/mtd/nand/bcm_nand.c
-@@ -0,0 +1,1591 @@
+@@ -0,0 +1,1590 @@
 +/*
 + * Nortstar NAND controller driver
 + * for Linux NAND library and MTD interface
@@ -1527,15 +1527,9 @@
 +static int bcmnand_probe(struct bcma_device *core)
 +{
 +	struct device *dev = &core->dev;
-+	struct device_node *np = dev->of_node;
 +	struct bcmnand_ctrl *ctrl;
 +	int res, i, irq;
 +
-+	if (!np) {
-+		pr_err("%s: no device tree node found\n", DRV_NAME);
-+		return -ENOENT;
-+	}
-+
 +	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
 +	if (!ctrl)
 +		return -ENOMEM;
@@ -1546,8 +1540,13 @@
 +	ctrl->core = core;
 +
 +	/* Acquire all interrupt lines */
-+	for (i = 0; i < of_irq_count(np); i++) {
-+		irq = irq_of_parse_and_map(np, i);
++	for (i = 0; i < NANDC_IRQ_NUM; i++) {
++		irq = bcma_core_irq(core, i);
++		if (!irq) {
++			pr_err("%s: IRQ no available irq: %i (idx: %i)\n",
++			       DRV_NAME, irq, i);
++			return res;
++		}
 +		res = devm_request_irq(dev, irq, bcmnand_isr, 0, DRV_NAME, ctrl);
 +		if (res < 0) {
 +			pr_err("%s: problem requesting irq: %i (idx: %i)\n",

target/linux/generic/patches-3.10/020-ssb_update.patch

@@ -526,6 +526,16 @@
  int ssb_gpio_init(struct ssb_bus *bus)
  {
  	if (ssb_chipco_available(&bus->chipco))
+@@ -201,7 +475,8 @@ int ssb_gpio_unregister(struct ssb_bus *
+ {
+ 	if (ssb_chipco_available(&bus->chipco) ||
+ 	    ssb_extif_available(&bus->extif)) {
+-		return gpiochip_remove(&bus->gpio);
++		gpiochip_remove(&bus->gpio);
++		return 0;
+ 	} else {
+ 		SSB_WARN_ON(1);
+ 	}
 --- a/drivers/ssb/main.c
 +++ b/drivers/ssb/main.c
 @@ -553,6 +553,14 @@ static int ssb_devices_register(struct s
@@ -726,15 +736,82 @@
  	for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
 --- a/drivers/ssb/pcihost_wrapper.c
 +++ b/drivers/ssb/pcihost_wrapper.c
-@@ -38,7 +38,7 @@ static int ssb_pcihost_resume(struct pci
+@@ -11,15 +11,17 @@
+  * Licensed under the GNU/GPL. See COPYING for details.
+  */
+ 
++#include <linux/pm.h>
+ #include <linux/pci.h>
+ #include <linux/export.h>
+ #include <linux/slab.h>
+ #include <linux/ssb/ssb.h>
+ 
+ 
+-#ifdef CONFIG_PM
+-static int ssb_pcihost_suspend(struct pci_dev *dev, pm_message_t state)
++#ifdef CONFIG_PM_SLEEP
++static int ssb_pcihost_suspend(struct device *d)
+ {
++	struct pci_dev *dev = to_pci_dev(d);
+ 	struct ssb_bus *ssb = pci_get_drvdata(dev);
+ 	int err;
+ 
+@@ -28,17 +30,23 @@ static int ssb_pcihost_suspend(struct pc
+ 		return err;
+ 	pci_save_state(dev);
+ 	pci_disable_device(dev);
+-	pci_set_power_state(dev, pci_choose_state(dev, state));
++
++	/* if there is a wakeup enabled child device on ssb bus,
++	   enable pci wakeup posibility. */
++	device_set_wakeup_enable(d, d->power.wakeup_path);
++
++	pci_prepare_to_sleep(dev);
+ 
+ 	return 0;
+ }
+ 
+-static int ssb_pcihost_resume(struct pci_dev *dev)
++static int ssb_pcihost_resume(struct device *d)
+ {
++	struct pci_dev *dev = to_pci_dev(d);
  	struct ssb_bus *ssb = pci_get_drvdata(dev);
  	int err;
  
 -	pci_set_power_state(dev, 0);
-+	pci_set_power_state(dev, PCI_D0);
++	pci_back_from_sleep(dev);
  	err = pci_enable_device(dev);
  	if (err)
  		return err;
+@@ -49,10 +57,12 @@ static int ssb_pcihost_resume(struct pci
+ 
+ 	return 0;
+ }
+-#else /* CONFIG_PM */
+-# define ssb_pcihost_suspend	NULL
+-# define ssb_pcihost_resume	NULL
+-#endif /* CONFIG_PM */
++
++static const struct dev_pm_ops ssb_pcihost_pm_ops = {
++	SET_SYSTEM_SLEEP_PM_OPS(ssb_pcihost_suspend, ssb_pcihost_resume)
++};
++
++#endif /* CONFIG_PM_SLEEP */
+ 
+ static int ssb_pcihost_probe(struct pci_dev *dev,
+ 			     const struct pci_device_id *id)
+@@ -115,8 +125,9 @@ int ssb_pcihost_register(struct pci_driv
+ {
+ 	driver->probe = ssb_pcihost_probe;
+ 	driver->remove = ssb_pcihost_remove;
+-	driver->suspend = ssb_pcihost_suspend;
+-	driver->resume = ssb_pcihost_resume;
++#ifdef CONFIG_PM_SLEEP
++	driver->driver.pm = &ssb_pcihost_pm_ops;
++#endif
+ 
+ 	return pci_register_driver(driver);
+ }
 --- a/drivers/ssb/sprom.c
 +++ b/drivers/ssb/sprom.c
 @@ -54,7 +54,7 @@ static int hex2sprom(u16 *sprom, const c

target/linux/generic/patches-3.10/025-bcma_backport.patch

@@ -48,16 +48,17 @@
  bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN)	+= driver_gmac_cmn.o
 --- a/drivers/bcma/bcma_private.h
 +++ b/drivers/bcma/bcma_private.h
-@@ -22,6 +22,8 @@
+@@ -22,6 +22,9 @@
  struct bcma_bus;
  
  /* main.c */
 +bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
 +		     int timeout);
++void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core);
  int bcma_bus_register(struct bcma_bus *bus);
  void bcma_bus_unregister(struct bcma_bus *bus);
  int __init bcma_bus_early_register(struct bcma_bus *bus,
-@@ -31,8 +33,6 @@ int __init bcma_bus_early_register(struc
+@@ -31,8 +34,6 @@ int __init bcma_bus_early_register(struc
  int bcma_bus_suspend(struct bcma_bus *bus);
  int bcma_bus_resume(struct bcma_bus *bus);
  #endif
@@ -66,7 +67,7 @@
  
  /* scan.c */
  int bcma_bus_scan(struct bcma_bus *bus);
-@@ -50,6 +50,10 @@ void bcma_chipco_serial_init(struct bcma
+@@ -50,6 +51,10 @@ void bcma_chipco_serial_init(struct bcma
  extern struct platform_device bcma_pflash_dev;
  #endif /* CONFIG_BCMA_DRIVER_MIPS */
  
@@ -77,7 +78,7 @@
  /* driver_chipcommon_pmu.c */
  u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc);
  u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc);
-@@ -84,6 +88,20 @@ extern int __init bcma_host_pci_init(voi
+@@ -84,6 +89,20 @@ extern int __init bcma_host_pci_init(voi
  extern void __exit bcma_host_pci_exit(void);
  #endif /* CONFIG_BCMA_HOST_PCI */
  
@@ -173,6 +174,15 @@
  	}
  
  	if (cc->capabilities & BCMA_CC_CAP_PMU)
+@@ -332,7 +339,7 @@ void bcma_chipco_serial_init(struct bcma
+ 		return;
+ 	}
+ 
+-	irq = bcma_core_irq(cc->core);
++	irq = bcma_core_irq(cc->core, 0);
+ 
+ 	/* Determine the registers of the UARTs */
+ 	cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
 --- a/drivers/bcma/driver_chipcommon_pmu.c
 +++ b/drivers/bcma/driver_chipcommon_pmu.c
 @@ -56,6 +56,109 @@ void bcma_chipco_regctl_maskset(struct b
@@ -476,7 +486,7 @@
 +					 handle_simple_irq);
 +	}
 +
-+	hwirq = bcma_core_irq(cc->core);
++	hwirq = bcma_core_irq(cc->core, 0);
 +	err = request_irq(hwirq, bcma_gpio_irq_handler, IRQF_SHARED, "gpio",
 +			  cc);
 +	if (err)
@@ -507,7 +517,7 @@
 +		return;
 +
 +	bcma_cc_mask32(cc, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO);
-+	free_irq(bcma_core_irq(cc->core), cc);
++	free_irq(bcma_core_irq(cc->core, 0), cc);
 +	for (gpio = 0; gpio < chip->ngpio; gpio++) {
 +		int irq = irq_find_mapping(cc->irq_domain, gpio);
 +
@@ -557,7 +567,7 @@
  	/* There is just one SoC in one device and its GPIO addresses should be
  	 * deterministic to address them more easily. The other buses could get
  	 * a random base number. */
-@@ -105,10 +239,21 @@ int bcma_gpio_init(struct bcma_drv_cc *c
+@@ -105,10 +239,22 @@ int bcma_gpio_init(struct bcma_drv_cc *c
  	else
  		chip->base		= -1;
  
@@ -577,8 +587,10 @@
  
  int bcma_gpio_unregister(struct bcma_drv_cc *cc)
  {
+-	return gpiochip_remove(&cc->gpio);
 +	bcma_gpio_irq_domain_exit(cc);
- 	return gpiochip_remove(&cc->gpio);
++	gpiochip_remove(&cc->gpio);
++	return 0;
  }
 --- a/drivers/bcma/driver_pci.c
 +++ b/drivers/bcma/driver_pci.c
@@ -706,8 +718,12 @@
  
  	if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) {
  		/* This is not a device on the PCI-core bridge. */
-@@ -595,6 +596,11 @@ int bcma_core_pci_plat_dev_init(struct p
- 	dev->irq = bcma_core_irq(pc_host->pdev->core);
+@@ -592,9 +593,14 @@ int bcma_core_pci_plat_dev_init(struct p
+ 	pr_info("PCI: Fixing up device %s\n", pci_name(dev));
+ 
+ 	/* Fix up interrupt lines */
+-	dev->irq = bcma_core_irq(pc_host->pdev->core);
++	dev->irq = bcma_core_irq(pc_host->pdev->core, 0);
  	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
  
 +	readrq = pcie_get_readrq(dev);
@@ -718,6 +734,14 @@
  	return 0;
  }
  EXPORT_SYMBOL(bcma_core_pci_plat_dev_init);
+@@ -611,6 +617,6 @@ int bcma_core_pci_pcibios_map_irq(const
+ 
+ 	pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
+ 			       pci_ops);
+-	return bcma_core_irq(pc_host->pdev->core);
++	return bcma_core_irq(pc_host->pdev->core, 0);
+ }
+ EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
 --- /dev/null
 +++ b/drivers/bcma/driver_pcie2.c
 @@ -0,0 +1,175 @@
@@ -930,15 +954,16 @@
  }
  
  #ifdef CONFIG_PM_SLEEP
-@@ -267,15 +272,20 @@ static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bc
+@@ -267,15 +272,21 @@ static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bc
  
  #endif /* CONFIG_PM_SLEEP */
  
 -static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
 +static const struct pci_device_id bcma_pci_bridge_tbl[] = {
  	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) },
+-	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43224) },
 +	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4313) },
- 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43224) },
++	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43224) },	/* 0xa8d8 */
  	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) },
  	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
  	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
@@ -948,21 +973,23 @@
 +	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a9) },
 +	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43aa) },
  	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
-+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43227) },	/* 0xA8DB */
++	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43227) },	/* 0xa8db, BCM43217 (sic!) */
++	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43228) },	/* 0xa8dc */
  	{ 0, },
  };
  MODULE_DEVICE_TABLE(pci, bcma_pci_bridge_tbl);
 --- a/drivers/bcma/main.c
 +++ b/drivers/bcma/main.c
-@@ -10,6 +10,7 @@
+@@ -10,6 +10,8 @@
  #include <linux/platform_device.h>
  #include <linux/bcma/bcma.h>
  #include <linux/slab.h>
 +#include <linux/of_address.h>
++#include <linux/of_irq.h>
  
  MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
  MODULE_LICENSE("GPL");
-@@ -69,28 +70,36 @@ static u16 bcma_cc_core_id(struct bcma_b
+@@ -69,28 +71,36 @@ static u16 bcma_cc_core_id(struct bcma_b
  	return BCMA_CORE_CHIPCOMMON;
  }
  
@@ -1010,7 +1037,7 @@
  }
  
  static void bcma_release_core_dev(struct device *dev)
-@@ -103,55 +112,121 @@ static void bcma_release_core_dev(struct
+@@ -103,55 +113,195 @@ static void bcma_release_core_dev(struct
  	kfree(core);
  }
  
@@ -1026,7 +1053,7 @@
 +	return false;
 +}
 +
-+#ifdef CONFIG_OF
++#if defined(CONFIG_OF) && defined(CONFIG_OF_ADDRESS)
 +static struct device_node *bcma_of_find_child_device(struct platform_device *parent,
 +						     struct bcma_device *core)
 +{
@@ -1047,6 +1074,46 @@
 +	return NULL;
 +}
 +
++static int bcma_of_irq_parse(struct platform_device *parent,
++			     struct bcma_device *core,
++			     struct of_phandle_args *out_irq, int num)
++{
++	__be32 laddr[1];
++	int rc;
++
++	if (core->dev.of_node) {
++		rc = of_irq_parse_one(core->dev.of_node, num, out_irq);
++		if (!rc)
++			return rc;
++	}
++
++	out_irq->np = parent->dev.of_node;
++	out_irq->args_count = 1;
++	out_irq->args[0] = num;
++
++	laddr[0] = cpu_to_be32(core->addr);
++	return of_irq_parse_raw(laddr, out_irq);
++}
++
++static unsigned int bcma_of_get_irq(struct platform_device *parent,
++				    struct bcma_device *core, int num)
++{
++	struct of_phandle_args out_irq;
++	int ret;
++
++	if (!parent || !parent->dev.of_node)
++		return 0;
++
++	ret = bcma_of_irq_parse(parent, core, &out_irq, num);
++	if (ret) {
++		bcma_debug(core->bus, "bcma_of_get_irq() failed with rc=%d\n",
++			   ret);
++		return 0;
++	}
++
++	return irq_create_of_mapping(&out_irq);
++}
++
 +static void bcma_of_fill_device(struct platform_device *parent,
 +				struct bcma_device *core)
 +{
@@ -1055,18 +1122,47 @@
 +	node = bcma_of_find_child_device(parent, core);
 +	if (node)
 +		core->dev.of_node = node;
++
++	core->irq = bcma_of_get_irq(parent, core, 0);
 +}
 +#else
 +static void bcma_of_fill_device(struct platform_device *parent,
 +				struct bcma_device *core)
 +{
 +}
++static inline unsigned int bcma_of_get_irq(struct platform_device *parent,
++					   struct bcma_device *core, int num)
++{
++	return 0;
++}
 +#endif /* CONFIG_OF */
 +
-+static void bcma_register_core(struct bcma_bus *bus, struct bcma_device *core)
++unsigned int bcma_core_irq(struct bcma_device *core, int num)
 +{
-+	int err;
++	struct bcma_bus *bus = core->bus;
++	unsigned int mips_irq;
 +
++	switch (bus->hosttype) {
++	case BCMA_HOSTTYPE_PCI:
++		return bus->host_pci->irq;
++	case BCMA_HOSTTYPE_SOC:
++		if (bus->drv_mips.core && num == 0) {
++			mips_irq = bcma_core_mips_irq(core);
++			return mips_irq <= 4 ? mips_irq + 2 : 0;
++		}
++		if (bus->host_pdev)
++			return bcma_of_get_irq(bus->host_pdev, core, num);
++		return 0;
++	case BCMA_HOSTTYPE_SDIO:
++		return 0;
++	}
++
++	return 0;
++}
++EXPORT_SYMBOL(bcma_core_irq);
++
++void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
++{
 +	core->dev.release = bcma_release_core_dev;
 +	core->dev.bus = &bcma_bus_type;
 +	dev_set_name(&core->dev, "bcma%d:%d", bus->num, core->core_index);
@@ -1090,6 +1186,11 @@
 +	case BCMA_HOSTTYPE_SDIO:
 +		break;
 +	}
++}
++
++static void bcma_register_core(struct bcma_bus *bus, struct bcma_device *core)
++{
++	int err;
 +
 +	err = device_register(&core->dev);
 +	if (err) {
@@ -1161,7 +1262,7 @@
  	}
  
  #ifdef CONFIG_BCMA_DRIVER_MIPS
-@@ -218,7 +293,7 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -218,7 +368,7 @@ int bcma_bus_register(struct bcma_bus *b
  	err = bcma_bus_scan(bus);
  	if (err) {
  		bcma_err(bus, "Failed to scan: %d\n", err);
@@ -1170,7 +1271,7 @@
  	}
  
  	/* Early init CC core */
-@@ -228,6 +303,12 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -228,6 +378,12 @@ int bcma_bus_register(struct bcma_bus *b
  		bcma_core_chipcommon_early_init(&bus->drv_cc);
  	}
  
@@ -1183,7 +1284,7 @@
  	/* Try to get SPROM */
  	err = bcma_sprom_get(bus);
  	if (err == -ENOENT) {
-@@ -242,6 +323,13 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -242,6 +398,13 @@ int bcma_bus_register(struct bcma_bus *b
  		bcma_core_chipcommon_init(&bus->drv_cc);
  	}
  
@@ -1197,7 +1298,7 @@
  	/* Init MIPS core */
  	core = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
  	if (core) {
-@@ -263,6 +351,13 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -263,6 +426,13 @@ int bcma_bus_register(struct bcma_bus *b
  		bcma_core_pci_init(&bus->drv_pci[1]);
  	}
  
@@ -1211,7 +1312,7 @@
  	/* Init GBIT MAC COMMON core */
  	core = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON);
  	if (core) {
-@@ -271,7 +366,7 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -271,7 +441,7 @@ int bcma_bus_register(struct bcma_bus *b
  	}
  
  	/* Register found cores */
@@ -1220,7 +1321,7 @@
  
  	bcma_info(bus, "Bus registered\n");
  
-@@ -289,6 +384,8 @@ void bcma_bus_unregister(struct bcma_bus
+@@ -289,6 +459,8 @@ void bcma_bus_unregister(struct bcma_bus
  	else if (err)
  		bcma_err(bus, "Can not unregister GPIO driver: %i\n", err);
  
@@ -1229,7 +1330,7 @@
  	cores[0] = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
  	cores[1] = bcma_find_core(bus, BCMA_CORE_PCIE);
  	cores[2] = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON);
-@@ -308,8 +405,6 @@ int __init bcma_bus_early_register(struc
+@@ -308,8 +480,6 @@ int __init bcma_bus_early_register(struc
  	struct bcma_device *core;
  	struct bcma_device_id match;
  
@@ -1238,7 +1339,7 @@
  	match.manuf = BCMA_MANUF_BCM;
  	match.id = bcma_cc_core_id(bus);
  	match.class = BCMA_CL_SIM;
-@@ -468,6 +563,11 @@ static int __init bcma_modinit(void)
+@@ -468,6 +638,11 @@ static int __init bcma_modinit(void)
  	if (err)
  		return err;
  
@@ -1250,7 +1351,7 @@
  #ifdef CONFIG_BCMA_HOST_PCI
  	err = bcma_host_pci_init();
  	if (err) {
-@@ -485,6 +585,7 @@ static void __exit bcma_modexit(void)
+@@ -485,6 +660,7 @@ static void __exit bcma_modexit(void)
  #ifdef CONFIG_BCMA_HOST_PCI
  	bcma_host_pci_exit();
  #endif
@@ -1431,6 +1532,14 @@
  	erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
  	if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
  		eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE);
+@@ -489,6 +505,7 @@ int bcma_bus_scan(struct bcma_bus *bus)
+ 		bus->nr_cores++;
+ 		other_core = bcma_find_core_reverse(bus, core->id.id);
+ 		core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1;
++		bcma_prepare_core(bus, core);
+ 
+ 		bcma_info(bus, "Core %d found: %s (manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+ 			  core->core_index, bcma_device_name(&core->id),
 --- a/drivers/bcma/sprom.c
 +++ b/drivers/bcma/sprom.c
 @@ -72,12 +72,12 @@ fail:
@@ -1760,6 +1869,13 @@
  extern bool bcma_core_is_enabled(struct bcma_device *core);
  extern void bcma_core_disable(struct bcma_device *core, u32 flags);
  extern int bcma_core_enable(struct bcma_device *core, u32 flags);
+@@ -415,4 +447,6 @@ extern u32 bcma_chipco_pll_read(struct b
+ #define  BCMA_DMA_TRANSLATION_DMA64_CMT	0x80000000 /* Client Mode Translation for 64-bit DMA */
+ extern u32 bcma_core_dma_translation(struct bcma_device *core);
+ 
++extern unsigned int bcma_core_irq(struct bcma_device *core, int num);
++
+ #endif /* LINUX_BCMA_H_ */
 --- a/include/linux/bcma/bcma_driver_chipcommon.h
 +++ b/include/linux/bcma/bcma_driver_chipcommon.h
 @@ -330,6 +330,8 @@
@@ -1869,6 +1985,23 @@
 +void bcma_chipco_b_mii_write(struct bcma_drv_cc_b *ccb, u32 offset, u32 value);
 +
  #endif /* LINUX_BCMA_DRIVER_CC_H_ */
+--- a/include/linux/bcma/bcma_driver_mips.h
++++ b/include/linux/bcma/bcma_driver_mips.h
+@@ -43,12 +43,12 @@ struct bcma_drv_mips {
+ extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
+ extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
+ 
+-extern unsigned int bcma_core_irq(struct bcma_device *core);
++extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
+ #else
+ static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
+ static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
+ 
+-static inline unsigned int bcma_core_irq(struct bcma_device *core)
++static inline unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+ {
+ 	return 0;
+ }
 --- a/include/linux/bcma/bcma_driver_pci.h
 +++ b/include/linux/bcma/bcma_driver_pci.h
 @@ -181,10 +181,31 @@ struct pci_dev;
@@ -2169,7 +2302,30 @@
  static const char * const part_probes[] = { "bcm47xxpart", NULL };
  
  static struct physmap_flash_data bcma_pflash_data = {
-@@ -229,11 +237,51 @@ u32 bcma_cpu_clock(struct bcma_drv_mips 
+@@ -107,7 +115,7 @@ static u32 bcma_core_mips_irqflag(struct
+  * If disabled, 5 is returned.
+  * If not supported, 6 is returned.
+  */
+-static unsigned int bcma_core_mips_irq(struct bcma_device *dev)
++unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+ {
+ 	struct bcma_device *mdev = dev->bus->drv_mips.core;
+ 	u32 irqflag;
+@@ -125,13 +133,6 @@ static unsigned int bcma_core_mips_irq(s
+ 	return 5;
+ }
+ 
+-unsigned int bcma_core_irq(struct bcma_device *dev)
+-{
+-	unsigned int mips_irq = bcma_core_mips_irq(dev);
+-	return mips_irq <= 4 ? mips_irq + 2 : 0;
+-}
+-EXPORT_SYMBOL(bcma_core_irq);
+-
+ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
+ {
+ 	unsigned int oldirq = bcma_core_mips_irq(dev);
+@@ -229,11 +230,51 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
  }
  EXPORT_SYMBOL(bcma_cpu_clock);
  
@@ -2221,7 +2377,7 @@
  
  	switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
  	case BCMA_CC_FLASHT_STSER:
-@@ -269,6 +317,20 @@ static void bcma_core_mips_flash_detect(
+@@ -269,6 +310,20 @@ static void bcma_core_mips_flash_detect(
  			bcma_nflash_init(cc);
  		}
  	}
@@ -2242,6 +2398,15 @@
  }
  
  void bcma_core_mips_early_init(struct bcma_drv_mips *mcore)
+@@ -361,7 +416,7 @@ void bcma_core_mips_init(struct bcma_drv
+ 		break;
+ 	default:
+ 		list_for_each_entry(core, &bus->cores, list) {
+-			core->irq = bcma_core_irq(core);
++			core->irq = bcma_core_irq(core, 0);
+ 		}
+ 		bcma_err(bus,
+ 			 "Unknown device (0x%x) found, can not configure IRQs\n",
 --- a/drivers/bcma/host_soc.c
 +++ b/drivers/bcma/host_soc.c
 @@ -7,6 +7,9 @@
@@ -2495,7 +2660,7 @@
  	bcm47xx_fill_bcma_boardinfo(&bcm47xx_bus.bcma.bus.boardinfo, NULL);
 --- /dev/null
 +++ b/Documentation/devicetree/bindings/bus/bcma.txt
-@@ -0,0 +1,32 @@
+@@ -0,0 +1,53 @@
 +Driver for ARM AXI Bus with Broadcom Plugins (bcma)
 +
 +Required properties:
@@ -2506,6 +2671,11 @@
 +
 +The cores on the AXI bus are automatically detected by bcma with the
 +memory ranges they are using and they get registered afterwards.
++Automatic detection of the IRQ number is not working on
++BCM47xx/BCM53xx ARM SoCs. To assign IRQ numbers to the cores, provide
++them manually through device tree. Use an interrupt-map to specify the
++IRQ used by the devices on the bus. The first address is just an index,
++because we do not have any special register.
 +
 +The top-level axi bus may contain children representing attached cores
 +(devices). This is needed since some hardware details can't be auto
@@ -2520,6 +2690,22 @@
 +		ranges = <0x00000000 0x18000000 0x00100000>;
 +		#address-cells = <1>;
 +		#size-cells = <1>;
++		#interrupt-cells = <1>;
++		interrupt-map-mask = <0x000fffff 0xffff>;
++		interrupt-map =
++			/* Ethernet Controller 0 */
++			<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
++
++			/* Ethernet Controller 1 */
++			<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
++
++			/* PCIe Controller 0 */
++			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 +
 +		chipcommon {
 +			reg = <0x00000000 0x1000>;

target/linux/generic/patches-3.14/020-ssb_update.patch

@@ -8,6 +8,18 @@
  	{ 0, },
  };
  MODULE_DEVICE_TABLE(pci, b43_pci_bridge_tbl);
+--- a/drivers/ssb/driver_gpio.c
++++ b/drivers/ssb/driver_gpio.c
+@@ -475,7 +475,8 @@ int ssb_gpio_unregister(struct ssb_bus *
+ {
+ 	if (ssb_chipco_available(&bus->chipco) ||
+ 	    ssb_extif_available(&bus->extif)) {
+-		return gpiochip_remove(&bus->gpio);
++		gpiochip_remove(&bus->gpio);
++		return 0;
+ 	} else {
+ 		SSB_WARN_ON(1);
+ 	}
 --- a/drivers/ssb/pci.c
 +++ b/drivers/ssb/pci.c
 @@ -326,13 +326,13 @@ err_ctlreg:
@@ -163,6 +175,84 @@
  
  	/* Extract cores power info info */
  	for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
+--- a/drivers/ssb/pcihost_wrapper.c
++++ b/drivers/ssb/pcihost_wrapper.c
+@@ -11,15 +11,17 @@
+  * Licensed under the GNU/GPL. See COPYING for details.
+  */
+ 
++#include <linux/pm.h>
+ #include <linux/pci.h>
+ #include <linux/export.h>
+ #include <linux/slab.h>
+ #include <linux/ssb/ssb.h>
+ 
+ 
+-#ifdef CONFIG_PM
+-static int ssb_pcihost_suspend(struct pci_dev *dev, pm_message_t state)
++#ifdef CONFIG_PM_SLEEP
++static int ssb_pcihost_suspend(struct device *d)
+ {
++	struct pci_dev *dev = to_pci_dev(d);
+ 	struct ssb_bus *ssb = pci_get_drvdata(dev);
+ 	int err;
+ 
+@@ -28,17 +30,23 @@ static int ssb_pcihost_suspend(struct pc
+ 		return err;
+ 	pci_save_state(dev);
+ 	pci_disable_device(dev);
+-	pci_set_power_state(dev, pci_choose_state(dev, state));
++
++	/* if there is a wakeup enabled child device on ssb bus,
++	   enable pci wakeup posibility. */
++	device_set_wakeup_enable(d, d->power.wakeup_path);
++
++	pci_prepare_to_sleep(dev);
+ 
+ 	return 0;
+ }
+ 
+-static int ssb_pcihost_resume(struct pci_dev *dev)
++static int ssb_pcihost_resume(struct device *d)
+ {
++	struct pci_dev *dev = to_pci_dev(d);
+ 	struct ssb_bus *ssb = pci_get_drvdata(dev);
+ 	int err;
+ 
+-	pci_set_power_state(dev, PCI_D0);
++	pci_back_from_sleep(dev);
+ 	err = pci_enable_device(dev);
+ 	if (err)
+ 		return err;
+@@ -49,10 +57,12 @@ static int ssb_pcihost_resume(struct pci
+ 
+ 	return 0;
+ }
+-#else /* CONFIG_PM */
+-# define ssb_pcihost_suspend	NULL
+-# define ssb_pcihost_resume	NULL
+-#endif /* CONFIG_PM */
++
++static const struct dev_pm_ops ssb_pcihost_pm_ops = {
++	SET_SYSTEM_SLEEP_PM_OPS(ssb_pcihost_suspend, ssb_pcihost_resume)
++};
++
++#endif /* CONFIG_PM_SLEEP */
+ 
+ static int ssb_pcihost_probe(struct pci_dev *dev,
+ 			     const struct pci_device_id *id)
+@@ -115,8 +125,9 @@ int ssb_pcihost_register(struct pci_driv
+ {
+ 	driver->probe = ssb_pcihost_probe;
+ 	driver->remove = ssb_pcihost_remove;
+-	driver->suspend = ssb_pcihost_suspend;
+-	driver->resume = ssb_pcihost_resume;
++#ifdef CONFIG_PM_SLEEP
++	driver->driver.pm = &ssb_pcihost_pm_ops;
++#endif
+ 
+ 	return pci_register_driver(driver);
+ }
 --- a/include/linux/ssb/ssb.h
 +++ b/include/linux/ssb/ssb.h
 @@ -33,6 +33,7 @@ struct ssb_sprom {

target/linux/generic/patches-3.14/025-bcma_backport.patch

@@ -11,6 +11,17 @@
  bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE)	+= driver_pci_host.o
  bcma-$(CONFIG_BCMA_DRIVER_MIPS)		+= driver_mips.o
  bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN)	+= driver_gmac_cmn.o
+--- a/drivers/bcma/driver_chipcommon.c
++++ b/drivers/bcma/driver_chipcommon.c
+@@ -339,7 +339,7 @@ void bcma_chipco_serial_init(struct bcma
+ 		return;
+ 	}
+ 
+-	irq = bcma_core_irq(cc->core);
++	irq = bcma_core_irq(cc->core, 0);
+ 
+ 	/* Determine the registers of the UARTs */
+ 	cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
 --- a/drivers/bcma/driver_chipcommon_pmu.c
 +++ b/drivers/bcma/driver_chipcommon_pmu.c
 @@ -603,6 +603,8 @@ void bcma_pmu_spuravoid_pllupdate(struct
@@ -33,6 +44,24 @@
  static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
  {
  	struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
+@@ -152,7 +152,7 @@ static int bcma_gpio_irq_domain_init(str
+ 					 handle_simple_irq);
+ 	}
+ 
+-	hwirq = bcma_core_irq(cc->core);
++	hwirq = bcma_core_irq(cc->core, 0);
+ 	err = request_irq(hwirq, bcma_gpio_irq_handler, IRQF_SHARED, "gpio",
+ 			  cc);
+ 	if (err)
+@@ -183,7 +183,7 @@ static void bcma_gpio_irq_domain_exit(st
+ 		return;
+ 
+ 	bcma_cc_mask32(cc, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO);
+-	free_irq(bcma_core_irq(cc->core), cc);
++	free_irq(bcma_core_irq(cc->core, 0), cc);
+ 	for (gpio = 0; gpio < chip->ngpio; gpio++) {
+ 		int irq = irq_find_mapping(cc->irq_domain, gpio);
+ 
 @@ -215,10 +215,22 @@ int bcma_gpio_init(struct bcma_drv_cc *c
  	chip->set		= bcma_gpio_set_value;
  	chip->direction_input	= bcma_gpio_direction_input;
@@ -58,6 +87,33 @@
  	/* There is just one SoC in one device and its GPIO addresses should be
  	 * deterministic to address them more easily. The other buses could get
  	 * a random base number. */
+@@ -243,5 +255,6 @@ int bcma_gpio_init(struct bcma_drv_cc *c
+ int bcma_gpio_unregister(struct bcma_drv_cc *cc)
+ {
+ 	bcma_gpio_irq_domain_exit(cc);
+-	return gpiochip_remove(&cc->gpio);
++	gpiochip_remove(&cc->gpio);
++	return 0;
+ }
+--- a/drivers/bcma/driver_pci_host.c
++++ b/drivers/bcma/driver_pci_host.c
+@@ -593,7 +593,7 @@ int bcma_core_pci_plat_dev_init(struct p
+ 	pr_info("PCI: Fixing up device %s\n", pci_name(dev));
+ 
+ 	/* Fix up interrupt lines */
+-	dev->irq = bcma_core_irq(pc_host->pdev->core);
++	dev->irq = bcma_core_irq(pc_host->pdev->core, 0);
+ 	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+ 
+ 	readrq = pcie_get_readrq(dev);
+@@ -617,6 +617,6 @@ int bcma_core_pci_pcibios_map_irq(const
+ 
+ 	pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
+ 			       pci_ops);
+-	return bcma_core_irq(pc_host->pdev->core);
++	return bcma_core_irq(pc_host->pdev->core, 0);
+ }
+ EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
 --- /dev/null
 +++ b/drivers/bcma/driver_pcie2.c
 @@ -0,0 +1,175 @@
@@ -270,15 +326,16 @@
  MODULE_DEVICE_TABLE(pci, bcma_pci_bridge_tbl);
 --- a/drivers/bcma/main.c
 +++ b/drivers/bcma/main.c
-@@ -10,6 +10,7 @@
+@@ -10,6 +10,8 @@
  #include <linux/platform_device.h>
  #include <linux/bcma/bcma.h>
  #include <linux/slab.h>
 +#include <linux/of_address.h>
++#include <linux/of_irq.h>
  
  MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
  MODULE_LICENSE("GPL");
-@@ -120,56 +121,124 @@ static void bcma_release_core_dev(struct
+@@ -120,56 +122,195 @@ static void bcma_release_core_dev(struct
  	kfree(core);
  }
  
@@ -315,6 +372,46 @@
 +	return NULL;
 +}
 +
++static int bcma_of_irq_parse(struct platform_device *parent,
++			     struct bcma_device *core,
++			     struct of_phandle_args *out_irq, int num)
++{
++	__be32 laddr[1];
++	int rc;
++
++	if (core->dev.of_node) {
++		rc = of_irq_parse_one(core->dev.of_node, num, out_irq);
++		if (!rc)
++			return rc;
++	}
++
++	out_irq->np = parent->dev.of_node;
++	out_irq->args_count = 1;
++	out_irq->args[0] = num;
++
++	laddr[0] = cpu_to_be32(core->addr);
++	return of_irq_parse_raw(laddr, out_irq);
++}
++
++static unsigned int bcma_of_get_irq(struct platform_device *parent,
++				    struct bcma_device *core, int num)
++{
++	struct of_phandle_args out_irq;
++	int ret;
++
++	if (!parent || !parent->dev.of_node)
++		return 0;
++
++	ret = bcma_of_irq_parse(parent, core, &out_irq, num);
++	if (ret) {
++		bcma_debug(core->bus, "bcma_of_get_irq() failed with rc=%d\n",
++			   ret);
++		return 0;
++	}
++
++	return irq_create_of_mapping(&out_irq);
++}
++
 +static void bcma_of_fill_device(struct platform_device *parent,
 +				struct bcma_device *core)
 +{
@@ -323,14 +420,45 @@
 +	node = bcma_of_find_child_device(parent, core);
 +	if (node)
 +		core->dev.of_node = node;
++
++	core->irq = bcma_of_get_irq(parent, core, 0);
 +}
 +#else
 +static void bcma_of_fill_device(struct platform_device *parent,
 +				struct bcma_device *core)
 +{
 +}
++static inline unsigned int bcma_of_get_irq(struct platform_device *parent,
++					   struct bcma_device *core, int num)
++{
++	return 0;
++}
 +#endif /* CONFIG_OF */
 +
++unsigned int bcma_core_irq(struct bcma_device *core, int num)
++{
++	struct bcma_bus *bus = core->bus;
++	unsigned int mips_irq;
++
++	switch (bus->hosttype) {
++	case BCMA_HOSTTYPE_PCI:
++		return bus->host_pci->irq;
++	case BCMA_HOSTTYPE_SOC:
++		if (bus->drv_mips.core && num == 0) {
++			mips_irq = bcma_core_mips_irq(core);
++			return mips_irq <= 4 ? mips_irq + 2 : 0;
++		}
++		if (bus->host_pdev)
++			return bcma_of_get_irq(bus->host_pdev, core, num);
++		return 0;
++	case BCMA_HOSTTYPE_SDIO:
++		return 0;
++	}
++
++	return 0;
++}
++EXPORT_SYMBOL(bcma_core_irq);
++
 +void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
 +{
 +	core->dev.release = bcma_release_core_dev;
@@ -433,7 +561,7 @@
  	}
  
  #ifdef CONFIG_BCMA_DRIVER_MIPS
-@@ -246,6 +315,12 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -246,6 +387,12 @@ int bcma_bus_register(struct bcma_bus *b
  		bcma_core_chipcommon_early_init(&bus->drv_cc);
  	}
  
@@ -446,7 +574,7 @@
  	/* Try to get SPROM */
  	err = bcma_sprom_get(bus);
  	if (err == -ENOENT) {
-@@ -260,6 +335,13 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -260,6 +407,13 @@ int bcma_bus_register(struct bcma_bus *b
  		bcma_core_chipcommon_init(&bus->drv_cc);
  	}
  
@@ -460,7 +588,7 @@
  	/* Init MIPS core */
  	core = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
  	if (core) {
-@@ -281,6 +363,13 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -281,6 +435,13 @@ int bcma_bus_register(struct bcma_bus *b
  		bcma_core_pci_init(&bus->drv_pci[1]);
  	}
  
@@ -474,7 +602,7 @@
  	/* Init GBIT MAC COMMON core */
  	core = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON);
  	if (core) {
-@@ -289,7 +378,7 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -289,7 +450,7 @@ int bcma_bus_register(struct bcma_bus *b
  	}
  
  	/* Register found cores */
@@ -483,7 +611,7 @@
  
  	bcma_info(bus, "Bus registered\n");
  
-@@ -307,6 +396,8 @@ void bcma_bus_unregister(struct bcma_bus
+@@ -307,6 +468,8 @@ void bcma_bus_unregister(struct bcma_bus
  	else if (err)
  		bcma_err(bus, "Can not unregister GPIO driver: %i\n", err);
  
@@ -492,7 +620,7 @@
  	cores[0] = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
  	cores[1] = bcma_find_core(bus, BCMA_CORE_PCIE);
  	cores[2] = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON);
-@@ -326,8 +417,6 @@ int __init bcma_bus_early_register(struc
+@@ -326,8 +489,6 @@ int __init bcma_bus_early_register(struc
  	struct bcma_device *core;
  	struct bcma_device_id match;
  
@@ -501,7 +629,7 @@
  	match.manuf = BCMA_MANUF_BCM;
  	match.id = bcma_cc_core_id(bus);
  	match.class = BCMA_CL_SIM;
-@@ -486,6 +575,11 @@ static int __init bcma_modinit(void)
+@@ -486,6 +647,11 @@ static int __init bcma_modinit(void)
  	if (err)
  		return err;
  
@@ -513,7 +641,7 @@
  #ifdef CONFIG_BCMA_HOST_PCI
  	err = bcma_host_pci_init();
  	if (err) {
-@@ -503,6 +597,7 @@ static void __exit bcma_modexit(void)
+@@ -503,6 +669,7 @@ static void __exit bcma_modexit(void)
  #ifdef CONFIG_BCMA_HOST_PCI
  	bcma_host_pci_exit();
  #endif
@@ -668,6 +796,30 @@
  	struct bcma_drv_mips drv_mips;
  	struct bcma_drv_gmac_cmn drv_gmac_cmn;
  
+@@ -440,4 +447,6 @@ extern u32 bcma_chipco_pll_read(struct b
+ #define  BCMA_DMA_TRANSLATION_DMA64_CMT	0x80000000 /* Client Mode Translation for 64-bit DMA */
+ extern u32 bcma_core_dma_translation(struct bcma_device *core);
+ 
++extern unsigned int bcma_core_irq(struct bcma_device *core, int num);
++
+ #endif /* LINUX_BCMA_H_ */
+--- a/include/linux/bcma/bcma_driver_mips.h
++++ b/include/linux/bcma/bcma_driver_mips.h
+@@ -43,12 +43,12 @@ struct bcma_drv_mips {
+ extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
+ extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
+ 
+-extern unsigned int bcma_core_irq(struct bcma_device *core);
++extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
+ #else
+ static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
+ static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
+ 
+-static inline unsigned int bcma_core_irq(struct bcma_device *core)
++static inline unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+ {
+ 	return 0;
+ }
 --- /dev/null
 +++ b/include/linux/bcma/bcma_driver_pcie2.h
 @@ -0,0 +1,158 @@
@@ -1115,7 +1267,30 @@
  static const char * const part_probes[] = { "bcm47xxpart", NULL };
  
  static struct physmap_flash_data bcma_pflash_data = {
-@@ -229,11 +237,51 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
+@@ -107,7 +115,7 @@ static u32 bcma_core_mips_irqflag(struct
+  * If disabled, 5 is returned.
+  * If not supported, 6 is returned.
+  */
+-static unsigned int bcma_core_mips_irq(struct bcma_device *dev)
++unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+ {
+ 	struct bcma_device *mdev = dev->bus->drv_mips.core;
+ 	u32 irqflag;
+@@ -125,13 +133,6 @@ static unsigned int bcma_core_mips_irq(s
+ 	return 5;
+ }
+ 
+-unsigned int bcma_core_irq(struct bcma_device *dev)
+-{
+-	unsigned int mips_irq = bcma_core_mips_irq(dev);
+-	return mips_irq <= 4 ? mips_irq + 2 : 0;
+-}
+-EXPORT_SYMBOL(bcma_core_irq);
+-
+ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
+ {
+ 	unsigned int oldirq = bcma_core_mips_irq(dev);
+@@ -229,11 +230,51 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
  }
  EXPORT_SYMBOL(bcma_cpu_clock);
  
@@ -1167,7 +1342,7 @@
  
  	switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
  	case BCMA_CC_FLASHT_STSER:
-@@ -269,6 +317,20 @@ static void bcma_core_mips_flash_detect(
+@@ -269,6 +310,20 @@ static void bcma_core_mips_flash_detect(
  			bcma_nflash_init(cc);
  		}
  	}
@@ -1188,6 +1363,15 @@
  }
  
  void bcma_core_mips_early_init(struct bcma_drv_mips *mcore)
+@@ -361,7 +416,7 @@ void bcma_core_mips_init(struct bcma_drv
+ 		break;
+ 	default:
+ 		list_for_each_entry(core, &bus->cores, list) {
+-			core->irq = bcma_core_irq(core);
++			core->irq = bcma_core_irq(core, 0);
+ 		}
+ 		bcma_err(bus,
+ 			 "Unknown device (0x%x) found, can not configure IRQs\n",
 --- a/include/linux/bcma/bcma_regs.h
 +++ b/include/linux/bcma/bcma_regs.h
 @@ -39,6 +39,11 @@
@@ -1366,7 +1550,7 @@
  
 --- /dev/null
 +++ b/Documentation/devicetree/bindings/bus/bcma.txt
-@@ -0,0 +1,32 @@
+@@ -0,0 +1,53 @@
 +Driver for ARM AXI Bus with Broadcom Plugins (bcma)
 +
 +Required properties:
@@ -1377,6 +1561,11 @@
 +
 +The cores on the AXI bus are automatically detected by bcma with the
 +memory ranges they are using and they get registered afterwards.
++Automatic detection of the IRQ number is not working on
++BCM47xx/BCM53xx ARM SoCs. To assign IRQ numbers to the cores, provide
++them manually through device tree. Use an interrupt-map to specify the
++IRQ used by the devices on the bus. The first address is just an index,
++because we do not have any special register.
 +
 +The top-level axi bus may contain children representing attached cores
 +(devices). This is needed since some hardware details can't be auto
@@ -1391,6 +1580,22 @@
 +		ranges = <0x00000000 0x18000000 0x00100000>;
 +		#address-cells = <1>;
 +		#size-cells = <1>;
++		#interrupt-cells = <1>;
++		interrupt-map-mask = <0x000fffff 0xffff>;
++		interrupt-map =
++			/* Ethernet Controller 0 */
++			<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
++
++			/* Ethernet Controller 1 */
++			<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
++
++			/* PCIe Controller 0 */
++			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 +
 +		chipcommon {
 +			reg = <0x00000000 0x1000>;

target/linux/generic/patches-3.14/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch

@@ -11,7 +11,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 
 --- a/drivers/mtd/ubi/build.c
 +++ b/drivers/mtd/ubi/build.c
-@@ -1209,6 +1209,48 @@
+@@ -1209,6 +1209,48 @@ static struct mtd_info * __init open_mtd
  	return mtd;
  }
  
@@ -60,7 +60,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  static int __init ubi_init(void)
  {
  	int err, i, k;
-@@ -1298,6 +1340,12 @@
+@@ -1298,6 +1340,12 @@ static int __init ubi_init(void)
  		}
  	}
  

target/linux/generic/patches-3.18/020-ssb_update.patch

@@ -0,0 +1,78 @@
+--- a/drivers/ssb/pcihost_wrapper.c
++++ b/drivers/ssb/pcihost_wrapper.c
+@@ -11,15 +11,17 @@
+  * Licensed under the GNU/GPL. See COPYING for details.
+  */
+ 
++#include <linux/pm.h>
+ #include <linux/pci.h>
+ #include <linux/export.h>
+ #include <linux/slab.h>
+ #include <linux/ssb/ssb.h>
+ 
+ 
+-#ifdef CONFIG_PM
+-static int ssb_pcihost_suspend(struct pci_dev *dev, pm_message_t state)
++#ifdef CONFIG_PM_SLEEP
++static int ssb_pcihost_suspend(struct device *d)
+ {
++	struct pci_dev *dev = to_pci_dev(d);
+ 	struct ssb_bus *ssb = pci_get_drvdata(dev);
+ 	int err;
+ 
+@@ -28,17 +30,23 @@ static int ssb_pcihost_suspend(struct pc
+ 		return err;
+ 	pci_save_state(dev);
+ 	pci_disable_device(dev);
+-	pci_set_power_state(dev, pci_choose_state(dev, state));
++
++	/* if there is a wakeup enabled child device on ssb bus,
++	   enable pci wakeup posibility. */
++	device_set_wakeup_enable(d, d->power.wakeup_path);
++
++	pci_prepare_to_sleep(dev);
+ 
+ 	return 0;
+ }
+ 
+-static int ssb_pcihost_resume(struct pci_dev *dev)
++static int ssb_pcihost_resume(struct device *d)
+ {
++	struct pci_dev *dev = to_pci_dev(d);
+ 	struct ssb_bus *ssb = pci_get_drvdata(dev);
+ 	int err;
+ 
+-	pci_set_power_state(dev, PCI_D0);
++	pci_back_from_sleep(dev);
+ 	err = pci_enable_device(dev);
+ 	if (err)
+ 		return err;
+@@ -49,10 +57,12 @@ static int ssb_pcihost_resume(struct pci
+ 
+ 	return 0;
+ }
+-#else /* CONFIG_PM */
+-# define ssb_pcihost_suspend	NULL
+-# define ssb_pcihost_resume	NULL
+-#endif /* CONFIG_PM */
++
++static const struct dev_pm_ops ssb_pcihost_pm_ops = {
++	SET_SYSTEM_SLEEP_PM_OPS(ssb_pcihost_suspend, ssb_pcihost_resume)
++};
++
++#endif /* CONFIG_PM_SLEEP */
+ 
+ static int ssb_pcihost_probe(struct pci_dev *dev,
+ 			     const struct pci_device_id *id)
+@@ -115,8 +125,9 @@ int ssb_pcihost_register(struct pci_driv
+ {
+ 	driver->probe = ssb_pcihost_probe;
+ 	driver->remove = ssb_pcihost_remove;
+-	driver->suspend = ssb_pcihost_suspend;
+-	driver->resume = ssb_pcihost_resume;
++#ifdef CONFIG_PM_SLEEP
++	driver->driver.pm = &ssb_pcihost_pm_ops;
++#endif
+ 
+ 	return pci_register_driver(driver);
+ }

target/linux/generic/patches-3.18/025-bcma_backport.patch

@@ -8,21 +8,198 @@
  int bcma_bus_register(struct bcma_bus *bus);
  void bcma_bus_unregister(struct bcma_bus *bus);
  int __init bcma_bus_early_register(struct bcma_bus *bus,
+--- a/drivers/bcma/driver_chipcommon.c
++++ b/drivers/bcma/driver_chipcommon.c
+@@ -339,7 +339,7 @@ void bcma_chipco_serial_init(struct bcma
+ 		return;
+ 	}
+ 
+-	irq = bcma_core_irq(cc->core);
++	irq = bcma_core_irq(cc->core, 0);
+ 
+ 	/* Determine the registers of the UARTs */
+ 	cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
+--- a/drivers/bcma/driver_gpio.c
++++ b/drivers/bcma/driver_gpio.c
+@@ -152,7 +152,7 @@ static int bcma_gpio_irq_domain_init(str
+ 					 handle_simple_irq);
+ 	}
+ 
+-	hwirq = bcma_core_irq(cc->core);
++	hwirq = bcma_core_irq(cc->core, 0);
+ 	err = request_irq(hwirq, bcma_gpio_irq_handler, IRQF_SHARED, "gpio",
+ 			  cc);
+ 	if (err)
+@@ -183,7 +183,7 @@ static void bcma_gpio_irq_domain_exit(st
+ 		return;
+ 
+ 	bcma_cc_mask32(cc, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO);
+-	free_irq(bcma_core_irq(cc->core), cc);
++	free_irq(bcma_core_irq(cc->core, 0), cc);
+ 	for (gpio = 0; gpio < chip->ngpio; gpio++) {
+ 		int irq = irq_find_mapping(cc->irq_domain, gpio);
+ 
+--- a/drivers/bcma/driver_mips.c
++++ b/drivers/bcma/driver_mips.c
+@@ -115,7 +115,7 @@ static u32 bcma_core_mips_irqflag(struct
+  * If disabled, 5 is returned.
+  * If not supported, 6 is returned.
+  */
+-static unsigned int bcma_core_mips_irq(struct bcma_device *dev)
++unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+ {
+ 	struct bcma_device *mdev = dev->bus->drv_mips.core;
+ 	u32 irqflag;
+@@ -133,13 +133,6 @@ static unsigned int bcma_core_mips_irq(s
+ 	return 5;
+ }
+ 
+-unsigned int bcma_core_irq(struct bcma_device *dev)
+-{
+-	unsigned int mips_irq = bcma_core_mips_irq(dev);
+-	return mips_irq <= 4 ? mips_irq + 2 : 0;
+-}
+-EXPORT_SYMBOL(bcma_core_irq);
+-
+ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
+ {
+ 	unsigned int oldirq = bcma_core_mips_irq(dev);
+@@ -423,7 +416,7 @@ void bcma_core_mips_init(struct bcma_drv
+ 		break;
+ 	default:
+ 		list_for_each_entry(core, &bus->cores, list) {
+-			core->irq = bcma_core_irq(core);
++			core->irq = bcma_core_irq(core, 0);
+ 		}
+ 		bcma_err(bus,
+ 			 "Unknown device (0x%x) found, can not configure IRQs\n",
+--- a/drivers/bcma/driver_pci_host.c
++++ b/drivers/bcma/driver_pci_host.c
+@@ -593,7 +593,7 @@ int bcma_core_pci_plat_dev_init(struct p
+ 	pr_info("PCI: Fixing up device %s\n", pci_name(dev));
+ 
+ 	/* Fix up interrupt lines */
+-	dev->irq = bcma_core_irq(pc_host->pdev->core);
++	dev->irq = bcma_core_irq(pc_host->pdev->core, 0);
+ 	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+ 
+ 	readrq = pcie_get_readrq(dev);
+@@ -617,6 +617,6 @@ int bcma_core_pci_pcibios_map_irq(const
+ 
+ 	pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
+ 			       pci_ops);
+-	return bcma_core_irq(pc_host->pdev->core);
++	return bcma_core_irq(pc_host->pdev->core, 0);
+ }
+ EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
 --- a/drivers/bcma/main.c
 +++ b/drivers/bcma/main.c
-@@ -169,10 +169,8 @@ static void bcma_of_fill_device(struct p
+@@ -11,6 +11,7 @@
+ #include <linux/bcma/bcma.h>
+ #include <linux/slab.h>
+ #include <linux/of_address.h>
++#include <linux/of_irq.h>
+ 
+ MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
+ MODULE_LICENSE("GPL");
+@@ -153,6 +154,46 @@ static struct device_node *bcma_of_find_
+ 	return NULL;
  }
+ 
++static int bcma_of_irq_parse(struct platform_device *parent,
++			     struct bcma_device *core,
++			     struct of_phandle_args *out_irq, int num)
++{
++	__be32 laddr[1];
++	int rc;
++
++	if (core->dev.of_node) {
++		rc = of_irq_parse_one(core->dev.of_node, num, out_irq);
++		if (!rc)
++			return rc;
++	}
++
++	out_irq->np = parent->dev.of_node;
++	out_irq->args_count = 1;
++	out_irq->args[0] = num;
++
++	laddr[0] = cpu_to_be32(core->addr);
++	return of_irq_parse_raw(laddr, out_irq);
++}
++
++static unsigned int bcma_of_get_irq(struct platform_device *parent,
++				    struct bcma_device *core, int num)
++{
++	struct of_phandle_args out_irq;
++	int ret;
++
++	if (!parent || !parent->dev.of_node)
++		return 0;
++
++	ret = bcma_of_irq_parse(parent, core, &out_irq, num);
++	if (ret) {
++		bcma_debug(core->bus, "bcma_of_get_irq() failed with rc=%d\n",
++			   ret);
++		return 0;
++	}
++
++	return irq_create_of_mapping(&out_irq);
++}
++
+ static void bcma_of_fill_device(struct platform_device *parent,
+ 				struct bcma_device *core)
+ {
+@@ -161,18 +202,47 @@ static void bcma_of_fill_device(struct p
+ 	node = bcma_of_find_child_device(parent, core);
+ 	if (node)
+ 		core->dev.of_node = node;
++
++	core->irq = bcma_of_get_irq(parent, core, 0);
+ }
+ #else
+ static void bcma_of_fill_device(struct platform_device *parent,
+ 				struct bcma_device *core)
+ {
+ }
++static inline unsigned int bcma_of_get_irq(struct platform_device *parent,
++					   struct bcma_device *core, int num)
++{
++	return 0;
++}
  #endif /* CONFIG_OF */
  
 -static void bcma_register_core(struct bcma_bus *bus, struct bcma_device *core)
-+void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
++unsigned int bcma_core_irq(struct bcma_device *core, int num)
  {
 -	int err;
--
++	struct bcma_bus *bus = core->bus;
++	unsigned int mips_irq;
++
++	switch (bus->hosttype) {
++	case BCMA_HOSTTYPE_PCI:
++		return bus->host_pci->irq;
++	case BCMA_HOSTTYPE_SOC:
++		if (bus->drv_mips.core && num == 0) {
++			mips_irq = bcma_core_mips_irq(core);
++			return mips_irq <= 4 ? mips_irq + 2 : 0;
++		}
++		if (bus->host_pdev)
++			return bcma_of_get_irq(bus->host_pdev, core, num);
++		return 0;
++	case BCMA_HOSTTYPE_SDIO:
++		return 0;
++	}
+ 
++	return 0;
++}
++EXPORT_SYMBOL(bcma_core_irq);
++
++void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
++{
  	core->dev.release = bcma_release_core_dev;
  	core->dev.bus = &bcma_bus_type;
  	dev_set_name(&core->dev, "bcma%d:%d", bus->num, core->core_index);
-@@ -196,6 +194,11 @@ static void bcma_register_core(struct bc
+@@ -196,6 +266,11 @@ static void bcma_register_core(struct bc
  	case BCMA_HOSTTYPE_SDIO:
  		break;
  	}
@@ -44,3 +221,29 @@
  
  		bcma_info(bus, "Core %d found: %s (manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
  			  core->core_index, bcma_device_name(&core->id),
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -447,4 +447,6 @@ extern u32 bcma_chipco_pll_read(struct b
+ #define  BCMA_DMA_TRANSLATION_DMA64_CMT	0x80000000 /* Client Mode Translation for 64-bit DMA */
+ extern u32 bcma_core_dma_translation(struct bcma_device *core);
+ 
++extern unsigned int bcma_core_irq(struct bcma_device *core, int num);
++
+ #endif /* LINUX_BCMA_H_ */
+--- a/include/linux/bcma/bcma_driver_mips.h
++++ b/include/linux/bcma/bcma_driver_mips.h
+@@ -43,12 +43,12 @@ struct bcma_drv_mips {
+ extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
+ extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
+ 
+-extern unsigned int bcma_core_irq(struct bcma_device *core);
++extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
+ #else
+ static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
+ static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
+ 
+-static inline unsigned int bcma_core_irq(struct bcma_device *core)
++static inline unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+ {
+ 	return 0;
+ }