mirror of https://github.com/hak5/openwrt.git
ath79: add support for TP-Link CPE610 v2
TP-Link CPE610 v2 is an outdoor wireless CPE for 5 GHz with one Ethernet port based on Atheros AR9344 Specifications: - 560/450/225 MHz (CPU/DDR/AHB) - 1x 10/100 Mbps Ethernet - 64 MB of DDR2 RAM - 8 MB of SPI-NOR Flash - 23dBi high-gain directional 2×2 MIMO antenna and a dedicated metal reflector - Power, LAN, WLAN5G green LEDs - 3x green RSSI LEDs Flashing instructions: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Signed-off-by: Andrew Cameron <apcameron@softhome.net>master
Andrew Cameron
Adrian Schmutzler
parent
9a477b833a
commit
d93da0d016
|
|
@ -0,0 +1,34 @@
|
||||||
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||||
|
/dts-v1/;
|
||||||
|
|
||||||
|
#include "ar9344_tplink_cpe.dtsi"
|
||||||
|
|
||||||
|
/ {
|
||||||
|
model = "TP-Link CPE610 v2";
|
||||||
|
compatible = "tplink,cpe610-v2", "qca,ar9344";
|
||||||
|
|
||||||
|
aliases {
|
||||||
|
led-boot = &led_lan;
|
||||||
|
led-failsafe = &led_lan;
|
||||||
|
led-upgrade = &led_lan;
|
||||||
|
};
|
||||||
|
|
||||||
|
leds {
|
||||||
|
compatible = "gpio-leds";
|
||||||
|
|
||||||
|
led_lan: lan {
|
||||||
|
label = "tp-link:green:lan";
|
||||||
|
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||||
|
};
|
||||||
|
|
||||||
|
wlan5g {
|
||||||
|
label = "tp-link:green:wlan5g";
|
||||||
|
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||||
|
linux,default-trigger = "phy0tpt";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
ð1 {
|
||||||
|
compatible = "syscon", "simple-mfd";
|
||||||
|
};
|
||||||
|
|
@ -243,6 +243,9 @@ tplink,cpe510-v3)
|
||||||
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13"
|
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13"
|
||||||
;;
|
;;
|
||||||
tplink,cpe610-v1|\
|
tplink,cpe610-v1|\
|
||||||
|
tplink,cpe610-v2)
|
||||||
|
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
|
||||||
|
;;
|
||||||
tplink,tl-wr902ac-v1)
|
tplink,tl-wr902ac-v1)
|
||||||
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
|
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
|
||||||
ucidef_set_led_netdev "internet" "Internet" "tp-link:green:internet" "eth0"
|
ucidef_set_led_netdev "internet" "Internet" "tp-link:green:internet" "eth0"
|
||||||
|
|
|
||||||
|
|
@ -39,6 +39,7 @@ ath79_setup_interfaces()
|
||||||
tplink,cpe510-v2|\
|
tplink,cpe510-v2|\
|
||||||
tplink,cpe510-v3|\
|
tplink,cpe510-v3|\
|
||||||
tplink,cpe610-v1|\
|
tplink,cpe610-v1|\
|
||||||
|
tplink,cpe610-v2|\
|
||||||
tplink,re350k-v1|\
|
tplink,re350k-v1|\
|
||||||
tplink,re355-v1|\
|
tplink,re355-v1|\
|
||||||
tplink,re450-v1|\
|
tplink,re450-v1|\
|
||||||
|
|
|
||||||
|
|
@ -352,6 +352,16 @@ define Device/tplink_cpe610-v1
|
||||||
endef
|
endef
|
||||||
TARGET_DEVICES += tplink_cpe610-v1
|
TARGET_DEVICES += tplink_cpe610-v1
|
||||||
|
|
||||||
|
define Device/tplink_cpe610-v2
|
||||||
|
$(Device/tplink-safeloader-okli)
|
||||||
|
SOC := ar9344
|
||||||
|
IMAGE_SIZE := 7680k
|
||||||
|
DEVICE_MODEL := CPE610
|
||||||
|
DEVICE_VARIANT := v2
|
||||||
|
TPLINK_BOARD_ID := CPE610V2
|
||||||
|
endef
|
||||||
|
TARGET_DEVICES += tplink_cpe610-v2
|
||||||
|
|
||||||
define Device/tplink_re350k-v1
|
define Device/tplink_re350k-v1
|
||||||
$(Device/tplink-safeloader)
|
$(Device/tplink-safeloader)
|
||||||
SOC := qca9558
|
SOC := qca9558
|
||||||
|
|
|
||||||
|
|
@ -474,6 +474,46 @@ static struct device_info boards[] = {
|
||||||
.last_sysupgrade_partition = "support-list",
|
.last_sysupgrade_partition = "support-list",
|
||||||
},
|
},
|
||||||
|
|
||||||
|
/** Firmware layout for the CPE610V2 */
|
||||||
|
{
|
||||||
|
.id = "CPE610V2",
|
||||||
|
.vendor = "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n",
|
||||||
|
.support_list =
|
||||||
|
"SupportList:\r\n"
|
||||||
|
"CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n"
|
||||||
|
"CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n"
|
||||||
|
"CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n"
|
||||||
|
"CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n"
|
||||||
|
"CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n"
|
||||||
|
"CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n"
|
||||||
|
"CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n"
|
||||||
|
"CPE610(TP-LINK|UN|N300-5):2.0\r\n"
|
||||||
|
"CPE610(TP-LINK|EU|N300-5):2.0\r\n"
|
||||||
|
"CPE610(TP-LINK|US|N300-5):2.0\r\n",
|
||||||
|
.support_trail = '\xff',
|
||||||
|
.soft_ver = NULL,
|
||||||
|
|
||||||
|
.partitions = {
|
||||||
|
{"fs-uboot", 0x00000, 0x20000},
|
||||||
|
{"partition-table", 0x20000, 0x02000},
|
||||||
|
{"default-mac", 0x30000, 0x00020},
|
||||||
|
{"product-info", 0x31100, 0x00100},
|
||||||
|
{"signature", 0x32000, 0x00400},
|
||||||
|
{"os-image", 0x40000, 0x200000},
|
||||||
|
{"file-system", 0x240000, 0x570000},
|
||||||
|
{"soft-version", 0x7b0000, 0x00100},
|
||||||
|
{"support-list", 0x7b1000, 0x00400},
|
||||||
|
{"user-config", 0x7c0000, 0x10000},
|
||||||
|
{"default-config", 0x7d0000, 0x10000},
|
||||||
|
{"log", 0x7e0000, 0x10000},
|
||||||
|
{"radio", 0x7f0000, 0x10000},
|
||||||
|
{NULL, 0, 0}
|
||||||
|
},
|
||||||
|
|
||||||
|
.first_sysupgrade_partition = "os-image",
|
||||||
|
.last_sysupgrade_partition = "support-list",
|
||||||
|
},
|
||||||
|
|
||||||
{
|
{
|
||||||
.id = "WBS210",
|
.id = "WBS210",
|
||||||
.vendor = "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
|
.vendor = "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue