hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ath79: add support for TP-Link CPE610 v2 

TP-Link CPE610 v2 is an outdoor wireless CPE for 5 GHz with
one Ethernet port based on Atheros AR9344

Specifications:
 - 560/450/225 MHz (CPU/DDR/AHB)
 - 1x 10/100 Mbps Ethernet
 - 64 MB of DDR2 RAM
 - 8 MB of SPI-NOR Flash
 - 23dBi high-gain directional 2×2 MIMO antenna and a
   dedicated metal reflector
 - Power, LAN, WLAN5G green LEDs
 - 3x green RSSI LEDs

Flashing instructions:
 Flash factory image through stock firmware WEB UI
 or through TFTP
 To get to TFTP recovery just hold reset button while powering on for
 around 4-5 seconds and release.
 Rename factory image to recovery.bin
 Stock TFTP server IP:192.168.0.100
 Stock device TFTP adress:192.168.0.254

Signed-off-by: Andrew Cameron <apcameron@softhome.net>
master
Andrew Cameron 2020-06-18 08:25:43 -05:00 committed by Adrian Schmutzler
parent 9a477b833a
commit d93da0d016
5 changed files with 88 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

34
target/linux/ath79/dts/ar9344_tplink_cpe610-v2.dts Normal file
View File

@ -0,0 +1,34 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar9344_tplink_cpe.dtsi"
/ {
model = "TP-Link CPE610 v2";
compatible = "tplink,cpe610-v2", "qca,ar9344";
aliases {
led-boot = &led_lan;
led-failsafe = &led_lan;
led-upgrade = &led_lan;
};
leds {
compatible = "gpio-leds";
led_lan: lan {
label = "tp-link:green:lan";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
wlan5g {
label = "tp-link:green:wlan5g";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
};
&eth1 {
compatible = "syscon", "simple-mfd";
};

3
target/linux/ath79/generic/base-files/etc/board.d/01_leds
View File

@ -243,6 +243,9 @@ tplink,cpe510-v3)
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13"
;;
tplink,cpe610-v1|\
tplink,cpe610-v2)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
;;
tplink,tl-wr902ac-v1)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
ucidef_set_led_netdev "internet" "Internet" "tp-link:green:internet" "eth0"

1
target/linux/ath79/generic/base-files/etc/board.d/02_network
View File

@ -39,6 +39,7 @@ ath79_setup_interfaces()
tplink,cpe510-v2|\
tplink,cpe510-v3|\
tplink,cpe610-v1|\
tplink,cpe610-v2|\
tplink,re350k-v1|\
tplink,re355-v1|\
tplink,re450-v1|\

10
target/linux/ath79/image/generic-tp-link.mk
View File

@ -352,6 +352,16 @@ define Device/tplink_cpe610-v1
endef
TARGET_DEVICES += tplink_cpe610-v1
define Device/tplink_cpe610-v2
$(Device/tplink-safeloader-okli)
SOC := ar9344
IMAGE_SIZE := 7680k
DEVICE_MODEL := CPE610
DEVICE_VARIANT := v2
TPLINK_BOARD_ID := CPE610V2
endef
TARGET_DEVICES += tplink_cpe610-v2
define Device/tplink_re350k-v1
$(Device/tplink-safeloader)
SOC := qca9558

40
tools/firmware-utils/src/tplink-safeloader.c
View File

@ -474,6 +474,46 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "support-list",
},
/** Firmware layout for the CPE610V2 */
{
.id = "CPE610V2",
.vendor = "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n",
.support_list =
"SupportList:\r\n"
"CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n"
"CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n"
"CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n"
"CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n"
"CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n"
"CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n"
"CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n"
"CPE610(TP-LINK|UN|N300-5):2.0\r\n"
"CPE610(TP-LINK|EU|N300-5):2.0\r\n"
"CPE610(TP-LINK|US|N300-5):2.0\r\n",
.support_trail = '\xff',
.soft_ver = NULL,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
{"partition-table", 0x20000, 0x02000},
{"default-mac", 0x30000, 0x00020},
{"product-info", 0x31100, 0x00100},
{"signature", 0x32000, 0x00400},
{"os-image", 0x40000, 0x200000},
{"file-system", 0x240000, 0x570000},
{"soft-version", 0x7b0000, 0x00100},
{"support-list", 0x7b1000, 0x00400},
{"user-config", 0x7c0000, 0x10000},
{"default-config", 0x7d0000, 0x10000},
{"log", 0x7e0000, 0x10000},
{"radio", 0x7f0000, 0x10000},
{NULL, 0, 0}
},
.first_sysupgrade_partition = "os-image",
.last_sysupgrade_partition = "support-list",
},
{
.id = "WBS210",
.vendor = "CPE510(TP-LINK|UN|N300-5):1.0\r\n",