bcm53xx: backport BCM5301X patches from 2019-09-30

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
lede-17.01
Rafał Miłecki 2016-09-30 15:43:08 +02:00
parent cea09329e5
commit d5dcb1bf97
8 changed files with 471 additions and 30 deletions

View File

@ -0,0 +1,70 @@
From 345fd105ff676ef672d1e41b31165b47aa040dab Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 21 Sep 2016 22:58:32 +0200
Subject: [PATCH] ARM: BCM5301X: Add separated DTS include file for BCM47094
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Use it to store BCM47094 specific properties/values and avoid repeating
them in device DTS files.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 3 +--
arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 3 +--
arch/arm/boot/dts/bcm47094.dtsi | 11 +++++++++++
3 files changed, 13 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/boot/dts/bcm47094.dtsi
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -9,7 +9,7 @@
/dts-v1/;
-#include "bcm4708.dtsi"
+#include "bcm47094.dtsi"
#include "bcm5301x-nand-cs0-bch1.dtsi"
/ {
@@ -107,7 +107,6 @@
&uart0 {
status = "okay";
- clock-frequency = <125000000>;
};
&usb3 {
--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -6,7 +6,7 @@
/dts-v1/;
-#include "bcm4708.dtsi"
+#include "bcm47094.dtsi"
#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
@@ -100,5 +100,4 @@
&uart0 {
status = "okay";
- clock-frequency = <125000000>;
};
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094.dtsi
@@ -0,0 +1,11 @@
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+#include "bcm4708.dtsi"
+
+&uart0 {
+ clock-frequency = <125000000>;
+};

View File

@ -0,0 +1,92 @@
From 3ede027b3dce2fca07350b7587c7c8f44706c94c Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 21 Sep 2016 22:58:33 +0200
Subject: [PATCH] ARM: BCM5301X: Enable UART on Netgear R8000
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
It was tested by LEDE users, all we need is to adjust clock frequency.
While we're at it create a separated DTS include file to share code with
other BCM4709 devices easier.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 2 +-
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 2 +-
arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 2 +-
arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 6 +++++-
arch/arm/boot/dts/bcm4709.dtsi | 11 +++++++++++
5 files changed, 19 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/boot/dts/bcm4709.dtsi
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -9,7 +9,7 @@
/dts-v1/;
-#include "bcm4708.dtsi"
+#include "bcm4709.dtsi"
#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -9,7 +9,7 @@
/dts-v1/;
-#include "bcm4708.dtsi"
+#include "bcm4709.dtsi"
#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -9,7 +9,7 @@
/dts-v1/;
-#include "bcm4708.dtsi"
+#include "bcm4709.dtsi"
#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -9,7 +9,7 @@
/dts-v1/;
-#include "bcm4708.dtsi"
+#include "bcm4709.dtsi"
#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
@@ -107,6 +107,10 @@
};
};
+&uart0 {
+ status = "okay";
+};
+
&usb2 {
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4709.dtsi
@@ -0,0 +1,11 @@
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+#include "bcm4708.dtsi"
+
+&uart0 {
+ clock-frequency = <125000000>;
+};

View File

@ -0,0 +1,51 @@
From 5b92db97f4ae345bd6f045c9427471680a7fe2e7 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 21 Sep 2016 22:58:34 +0200
Subject: [PATCH] ARM: BCM5301X: Specify USB 3.0 PHY in DT
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Driver for Northstar USB 3.0 PHY has been recently added under the name
phy-bcm-ns-usb3. Add binding for it into the DT files.
The only slightly tricky part is BCM47094 which uses different PHY
version and requires different compatible value.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm47094.dtsi | 6 ++++++
arch/arm/boot/dts/bcm5301x.dtsi | 7 +++++++
2 files changed, 13 insertions(+)
--- a/arch/arm/boot/dts/bcm47094.dtsi
+++ b/arch/arm/boot/dts/bcm47094.dtsi
@@ -6,6 +6,12 @@
#include "bcm4708.dtsi"
+/ {
+ usb3_phy: usb3-phy {
+ compatible = "brcm,ns-bx-usb3-phy";
+ };
+};
+
&uart0 {
clock-frequency = <125000000>;
};
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -149,6 +149,13 @@
clock-names = "phy-ref-clk";
};
+ usb3_phy: usb3-phy {
+ compatible = "brcm,ns-ax-usb3-phy";
+ reg = <0x18105000 0x1000>, <0x18003000 0x1000>;
+ reg-names = "dmp", "ccb-mii";
+ #phy-cells = <0>;
+ };
+
axi@18000000 {
compatible = "brcm,bus-axi";
reg = <0x18000000 0x1000>;

View File

@ -0,0 +1,93 @@
From 46daccf62d1651bf8b09978478ca6465a7a81f47 Mon Sep 17 00:00:00 2001
From: Dan Haab <dhaab@luxul.com>
Date: Tue, 27 Sep 2016 11:27:10 -0600
Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XAP-1510
Luxul XAP-1510 is an AP device based on BCM4708 SoC with 2 x BCM4360
chipsets on PCB connected using PCIe.
Signed-off-by: Dan Haab <dhaab@luxul.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 64 ++++++++++++++++++++++++++++
2 files changed, 65 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -65,6 +65,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4708-asus-rt-ac56u.dtb \
bcm4708-asus-rt-ac68u.dtb \
bcm4708-buffalo-wzr-1750dhp.dtb \
+ bcm4708-luxul-xap-1510.dtb \
bcm4708-luxul-xwc-1000.dtb \
bcm4708-netgear-r6250.dtb \
bcm4708-netgear-r6300-v2.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2016 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+ compatible = "luxul,xap-1510v1", "brcm,bcm4708";
+ model = "Luxul XAP-1510 V1";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ 5ghz {
+ label = "bcm53xx:blue:5ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ 2ghz {
+ label = "bcm53xx:blue:2ghz";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&spi_nor {
+ status = "okay";
+};

View File

@ -0,0 +1,159 @@
From ef3bc318adeb15b38688df6a583bafea2befce43 Mon Sep 17 00:00:00 2001
From: Dan Haab <dhaab@luxul.com>
Date: Tue, 27 Sep 2016 11:27:11 -0600
Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XWR-3100
Luxul XWR-3100 is a wireless router based on BCM47094 SoC with two
4366c0 FullMAC PCIe cards on the PCB. It uses NAND with BCH-4 ECC
algorithm.
Signed-off-by: Dan Haab <dhaab@luxul.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 111 ++++++++++++++++++++++++++
arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi | 13 +++
3 files changed, 125 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
create mode 100644 arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4709-netgear-r7000.dtb \
bcm4709-netgear-r8000.dtb \
bcm47094-dlink-dir-885l.dtb \
+ bcm47094-luxul-xwr-3100.dtb \
bcm47094-netgear-r8500.dtb \
bcm94708.dtb \
bcm94709.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2016 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+ compatible = "luxul,xwr-3100v1", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Luxul XWR-3100 V1";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "bcm53xx:green:power";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ lan3 {
+ label = "bcm53xx:green:lan1";
+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ lan4 {
+ label = "bcm53xx:green:lan0";
+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ wan {
+ label = "bcm53xx:green:wan";
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ lan1 {
+ label = "bcm53xx:green:lan3";
+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ lan2 {
+ label = "bcm53xx:green:lan2";
+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ usb3 {
+ label = "bcm53xx:green:usb3";
+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+
+ 2ghz {
+ label = "bcm53xx:green:2ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ 5ghz {
+ label = "bcm53xx:green:5ghz";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+ status = "okay";
+};
--- /dev/null
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
@@ -0,0 +1,13 @@
+/*
+ * Copyright 2016 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+#include "bcm5301x-nand-cs0.dtsi"
+
+&nandcs {
+ nand-ecc-algo = "bch";
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+};

View File

@ -9,14 +9,14 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -75,6 +75,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
@@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4709-asus-rt-ac87u.dtb \
bcm4709-buffalo-wxr-1900dhp.dtb \
bcm4709-netgear-r7000.dtb \
+ bcm4709-netgear-r7900.dtb \
bcm4709-netgear-r8000.dtb \
bcm47094-dlink-dir-885l.dtb \
bcm47094-netgear-r8500.dtb \
bcm47094-luxul-xwr-3100.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7900.dts
@@ -0,0 +1,41 @@
@ -31,7 +31,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {

View File

@ -13,9 +13,9 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
bcm4708-asus-rt-ac68u.dtb \
bcm4708-buffalo-wzr-1750dhp.dtb \
+ bcm4708-linksys-ea6300-v1.dtb \
bcm4708-luxul-xap-1510.dtb \
bcm4708-luxul-xwc-1000.dtb \
bcm4708-netgear-r6250.dtb \
bcm4708-netgear-r6300-v2.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
@@ -0,0 +1,48 @@

View File

@ -70,47 +70,23 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+};
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -65,3 +65,8 @@
@@ -65,3 +65,7 @@
};
};
};
+
+&uart0 {
+ status = "okay";
+ clock-frequency = <125000000>;
+};
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -128,6 +128,10 @@
@@ -128,6 +128,9 @@
};
};
+&uart0 {
+ status = "okay";
+ clock-frequency = <125000000>;
+};
&usb2 {
vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -108,6 +108,11 @@
};
};
+&uart0 {
+ status = "okay";
+ clock-frequency = <125000000>;
+};
+
&usb2 {
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -104,4 +104,5 @@
&uart0 {
status = "okay";
+ clock-frequency = <125000000>;
};