ipq806x: replace caf nss-gmac driver by upstream stmmac

This driver has been cherry-picked and backported from the following
LKML thread:
*https://lkml.org/lkml/2015/5/26/744

It also updates the DT accordingly.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45831
lede-17.01
John Crispin 2015-05-29 12:26:01 +00:00
parent 72369c2976
commit d2a2eb7e48
31 changed files with 3962 additions and 629 deletions

View File

@ -15,7 +15,7 @@ KERNELNAME:=zImage Image dtbs
include $(INCLUDE_DIR)/target.mk include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += \ DEFAULT_PACKAGES += \
kmod-leds-gpio kmod-gpio-button-hotplug kmod-qca-nss-gmac swconfig \ kmod-leds-gpio kmod-gpio-button-hotplug kmod-stmmac swconfig \
kmod-ata-core kmod-ata-ahci kmod-ata-ahci-platform kmod-ata-core kmod-ata-ahci kmod-ata-ahci-platform

View File

@ -25,7 +25,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
qcom-msm8974-sony-xperia-honami.dtb qcom-msm8974-sony-xperia-honami.dtb
--- /dev/null --- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
@@ -0,0 +1,257 @@ @@ -0,0 +1,132 @@
+#include "qcom-ipq8064-v1.0.dtsi" +#include "qcom-ipq8064-v1.0.dtsi"
+ +
+/ { +/ {
@ -50,15 +50,8 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
+ linux,stdout-path = "serial0:115200n8"; + linux,stdout-path = "serial0:115200n8";
+ }; + };
+ +
+ aliases {
+ mdio-gpio0 = &mdio0;
+ };
+
+ soc { + soc {
+ pinmux@800000 { + pinmux@800000 {
+ pinctrl-0 = <&mdio0_pins &rgmii0_pinmux>;
+ pinctrl-names = "default";
+
+ i2c4_pins: i2c4_pinmux { + i2c4_pins: i2c4_pinmux {
+ pins = "gpio12", "gpio13"; + pins = "gpio12", "gpio13";
+ function = "gsbi4"; + function = "gsbi4";
@ -73,23 +66,6 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
+ bias-none; + bias-none;
+ }; + };
+ }; + };
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ rgmii0_pinmux: rgmii0_pinmux {
+ mux {
+ pins = "gpio2", "gpio66";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+ }; + };
+ +
+ gsbi2: gsbi@12480000 { + gsbi2: gsbi@12480000 {
@ -180,106 +156,5 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
+ usb30@1 { + usb30@1 {
+ status = "ok"; + status = "ok";
+ }; + };
+
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
+
+ phy0: ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ device_type = "ethernet-phy";
+ reg = <4>;
+ };
+
+ phy6: ethernet-phy@6 {
+ device_type = "ethernet-phy";
+ reg = <6>;
+ };
+
+ phy7: ethernet-phy@7 {
+ device_type = "ethernet-phy";
+ reg = <7>;
+ };
+ };
+
+ nss-gmac-common {
+ reg = <0x03000000 0x0000FFFF 0x1bb00000 0x0000FFFF 0x00900000 0x00004000>;
+ reg-names = "nss_reg_base" , "qsgmii_reg_base", "clk_ctl_base";
+ };
+
+ gmac0: ethernet@37000000 {
+ status = "ok";
+ phy-mode = "rgmii";
+ qcom,id = <0>;
+ qcom,phy_mdio_addr = <4>;
+ qcom,poll_required = <1>;
+ qcom,rgmii_delay = <1>;
+ qcom,emulation = <0>;
+ qcom,forced_speed = <1000>;
+ qcom,forced_duplex = <1>;
+ qcom,socver = <0>;
+ local-mac-address = [000000000000];
+ mdiobus = <&mdio0>;
+ };
+
+ gmac1: ethernet@37200000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <1>;
+ qcom,phy_mdio_addr = <0>;
+ qcom,poll_required = <0>;
+ qcom,rgmii_delay = <0>;
+ qcom,emulation = <0>;
+ qcom,forced_speed = <1000>;
+ qcom,forced_duplex = <1>;
+ qcom,socver = <0>;
+ local-mac-address = [000000000000];
+ mdiobus = <&mdio0>;
+ };
+
+ gmac2: ethernet@37400000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+ qcom,phy_mdio_addr = <6>;
+ qcom,poll_required = <1>;
+ qcom,rgmii_delay = <0>;
+ qcom,emulation = <0>;
+ qcom,forced_speed = <0>;
+ qcom,forced_duplex = <0>;
+ qcom,socver = <0>;
+ local-mac-address = [000000000000];
+ mdiobus = <&mdio0>;
+ };
+
+ gmac3: ethernet@37600000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <3>;
+ qcom,phy_mdio_addr = <7>;
+ qcom,poll_required = <1>;
+ qcom,rgmii_delay = <0>;
+ qcom,emulation = <0>;
+ qcom,forced_speed = <0>;
+ qcom,forced_duplex = <0>;
+ qcom,socver = <0>;
+ local-mac-address = [000000000000];
+ mdiobus = <&mdio0>;
+ };
+ }; + };
+}; +};

View File

@ -60,7 +60,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
}; };
--- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts --- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
@@ -37,6 +37,30 @@ @@ -30,6 +30,30 @@
bias-disable; bias-disable;
}; };
@ -91,10 +91,11 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
spi_pins: spi_pins { spi_pins: spi_pins {
mux { mux {
pins = "gpio18", "gpio19", "gpio21"; pins = "gpio18", "gpio19", "gpio21";
@@ -153,6 +177,27 @@ @@ -128,5 +152,26 @@
usb30@1 {
status = "ok"; status = "ok";
}; };
+
+ pcie0: pci@1b500000 { + pcie0: pci@1b500000 {
+ status = "ok"; + status = "ok";
+ reset-gpio = <&qcom_pinmux 3 0>; + reset-gpio = <&qcom_pinmux 3 0>;
@ -115,10 +116,8 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
+ pinctrl-0 = <&pcie3_pins>; + pinctrl-0 = <&pcie3_pins>;
+ pinctrl-names = "default"; + pinctrl-names = "default";
+ }; + };
+ };
mdio0: mdio { };
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -3,6 +3,8 @@ @@ -3,6 +3,8 @@
@ -130,7 +129,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
/ { / {
model = "Qualcomm IPQ8064"; model = "Qualcomm IPQ8064";
@@ -306,6 +307,129 @@ @@ -306,6 +308,129 @@
#reset-cells = <1>; #reset-cells = <1>;
}; };
@ -260,7 +259,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
hs_phy_1: phy@100f8800 { hs_phy_1: phy@100f8800 {
compatible = "qcom,dwc3-hs-usb-phy"; compatible = "qcom,dwc3-hs-usb-phy";
reg = <0x100f8800 0x30>; reg = <0x100f8800 0x30>;
@@ -389,6 +513,5 @@ @@ -389,6 +514,5 @@
dr_mode = "host"; dr_mode = "host";
}; };
}; };

View File

@ -14,11 +14,9 @@ Signed-off-by: Mark Brown <broonie@kernel.org>
drivers/regulator/qcom_rpm-regulator.c | 19 +++++++++++++++++++ drivers/regulator/qcom_rpm-regulator.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+) 1 file changed, 19 insertions(+)
diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c
index b55cd5b..fbcbd3f 100644
--- a/drivers/regulator/qcom_rpm-regulator.c --- a/drivers/regulator/qcom_rpm-regulator.c
+++ b/drivers/regulator/qcom_rpm-regulator.c +++ b/drivers/regulator/qcom_rpm-regulator.c
@@ -183,6 +183,13 @@ static const struct regulator_linear_range ftsmps_ranges[] = { @@ -183,6 +183,13 @@ static const struct regulator_linear_ran
REGULATOR_LINEAR_RANGE(1500000, 64, 100, 50000), REGULATOR_LINEAR_RANGE(1500000, 64, 100, 50000),
}; };
@ -32,7 +30,7 @@ index b55cd5b..fbcbd3f 100644
static const struct regulator_linear_range ncp_ranges[] = { static const struct regulator_linear_range ncp_ranges[] = {
REGULATOR_LINEAR_RANGE(1500000, 0, 31, 50000), REGULATOR_LINEAR_RANGE(1500000, 0, 31, 50000),
}; };
@@ -559,6 +566,16 @@ static const struct qcom_rpm_reg pm8921_switch = { @@ -559,6 +566,16 @@ static const struct qcom_rpm_reg pm8921_
.parts = &rpm8960_switch_parts, .parts = &rpm8960_switch_parts,
}; };
@ -49,7 +47,7 @@ index b55cd5b..fbcbd3f 100644
static const struct of_device_id rpm_of_match[] = { static const struct of_device_id rpm_of_match[] = {
{ .compatible = "qcom,rpm-pm8058-pldo", .data = &pm8058_pldo }, { .compatible = "qcom,rpm-pm8058-pldo", .data = &pm8058_pldo },
{ .compatible = "qcom,rpm-pm8058-nldo", .data = &pm8058_nldo }, { .compatible = "qcom,rpm-pm8058-nldo", .data = &pm8058_nldo },
@@ -578,6 +595,8 @@ static const struct of_device_id rpm_of_match[] = { @@ -578,6 +595,8 @@ static const struct of_device_id rpm_of_
{ .compatible = "qcom,rpm-pm8921-ftsmps", .data = &pm8921_ftsmps }, { .compatible = "qcom,rpm-pm8921-ftsmps", .data = &pm8921_ftsmps },
{ .compatible = "qcom,rpm-pm8921-ncp", .data = &pm8921_ncp }, { .compatible = "qcom,rpm-pm8921-ncp", .data = &pm8921_ncp },
{ .compatible = "qcom,rpm-pm8921-switch", .data = &pm8921_switch }, { .compatible = "qcom,rpm-pm8921-switch", .data = &pm8921_switch },
@ -58,6 +56,3 @@ index b55cd5b..fbcbd3f 100644
{ } { }
}; };
MODULE_DEVICE_TABLE(of, rpm_of_match); MODULE_DEVICE_TABLE(of, rpm_of_match);
--
2.1.4

View File

@ -13,11 +13,9 @@ Signed-off-by: Lee Jones <lee.jones@linaro.org>
drivers/regulator/qcom_rpm-regulator.c | 1 + drivers/regulator/qcom_rpm-regulator.c | 1 +
1 file changed, 1 insertion(+) 1 file changed, 1 insertion(+)
diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c
index 8364ff3..edd0a17 100644
--- a/drivers/regulator/qcom_rpm-regulator.c --- a/drivers/regulator/qcom_rpm-regulator.c
+++ b/drivers/regulator/qcom_rpm-regulator.c +++ b/drivers/regulator/qcom_rpm-regulator.c
@@ -205,6 +205,7 @@ static int rpm_reg_write(struct qcom_rpm_reg *vreg, @@ -205,6 +205,7 @@ static int rpm_reg_write(struct qcom_rpm
vreg->val[req->word] |= value << req->shift; vreg->val[req->word] |= value << req->shift;
return qcom_rpm_write(vreg->rpm, return qcom_rpm_write(vreg->rpm,
@ -25,6 +23,3 @@ index 8364ff3..edd0a17 100644
vreg->resource, vreg->resource,
vreg->val, vreg->val,
vreg->parts->request_len); vreg->parts->request_len);
--
2.1.4

View File

@ -7,8 +7,8 @@
+#include <dt-bindings/mfd/qcom-rpm.h> +#include <dt-bindings/mfd/qcom-rpm.h>
#include <dt-bindings/soc/qcom,gsbi.h> #include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/reset/qcom,gcc-ipq806x.h> #include <dt-bindings/reset/qcom,gcc-ipq806x.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -75,6 +76,63 @@ @@ -76,6 +77,63 @@
ranges; ranges;
compatible = "simple-bus"; compatible = "simple-bus";
@ -72,7 +72,7 @@
qcom_pinmux: pinmux@800000 { qcom_pinmux: pinmux@800000 {
compatible = "qcom,ipq8064-pinctrl"; compatible = "qcom,ipq8064-pinctrl";
reg = <0x800000 0x4000>; reg = <0x800000 0x4000>;
@@ -119,6 +177,12 @@ @@ -120,6 +178,12 @@
reg = <0x02098000 0x1000>, <0x02008000 0x1000>; reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
}; };

View File

@ -42,11 +42,9 @@ Signed-off-by: Michael Turquette <mturquette@linaro.org>
drivers/clk/clk-mux.c | 2 +- drivers/clk/clk-mux.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-) 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index 4f96ff3..6e1ecf9 100644
--- a/drivers/clk/clk-mux.c --- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c +++ b/drivers/clk/clk-mux.c
@@ -77,7 +77,7 @@ static int clk_mux_set_parent(struct clk_hw *hw, u8 index) @@ -77,7 +77,7 @@ static int clk_mux_set_parent(struct clk
else { else {
if (mux->flags & CLK_MUX_INDEX_BIT) if (mux->flags & CLK_MUX_INDEX_BIT)
@ -55,6 +53,3 @@ index 4f96ff3..6e1ecf9 100644
if (mux->flags & CLK_MUX_INDEX_ONE) if (mux->flags & CLK_MUX_INDEX_ONE)
index++; index++;
--
2.1.4

View File

@ -22,7 +22,7 @@ Signed-off-by: Michael Turquette <mturquette@linaro.org>
--- a/drivers/clk/clk-divider.c --- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c +++ b/drivers/clk/clk-divider.c
@@ -463,3 +463,19 @@ struct clk *clk_register_divider_table(s @@ -461,3 +461,19 @@ struct clk *clk_register_divider_table(s
width, clk_divider_flags, table, lock); width, clk_divider_flags, table, lock);
} }
EXPORT_SYMBOL_GPL(clk_register_divider_table); EXPORT_SYMBOL_GPL(clk_register_divider_table);

View File

@ -1,6 +1,6 @@
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -23,6 +23,11 @@ @@ -24,6 +24,11 @@
next-level-cache = <&L2>; next-level-cache = <&L2>;
qcom,acc = <&acc0>; qcom,acc = <&acc0>;
qcom,saw = <&saw0>; qcom,saw = <&saw0>;
@ -12,7 +12,7 @@
}; };
cpu@1 { cpu@1 {
@@ -33,11 +38,24 @@ @@ -34,11 +39,24 @@
next-level-cache = <&L2>; next-level-cache = <&L2>;
qcom,acc = <&acc1>; qcom,acc = <&acc1>;
qcom,saw = <&saw1>; qcom,saw = <&saw1>;
@ -37,7 +37,7 @@
}; };
}; };
@@ -70,6 +88,46 @@ @@ -71,6 +89,46 @@
}; };
}; };
@ -84,7 +84,7 @@
soc: soc { soc: soc {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
@@ -170,11 +228,13 @@ @@ -171,11 +229,13 @@
acc0: clock-controller@2088000 { acc0: clock-controller@2088000 {
compatible = "qcom,kpss-acc-v1"; compatible = "qcom,kpss-acc-v1";
reg = <0x02088000 0x1000>, <0x02008000 0x1000>; reg = <0x02088000 0x1000>, <0x02008000 0x1000>;

View File

@ -1,164 +0,0 @@
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -22,8 +22,15 @@
linux,stdout-path = "serial0:115200n8";
};
+ aliases {
+ mdio-gpio0 = &mdio0;
+ };
+
soc {
pinmux@800000 {
+ pinctrl-0 = <&mdio0_pins &rgmii2_pins>;
+ pinctrl-names = "default";
+
i2c4_pins: i2c4_pinmux {
pins = "gpio12", "gpio13";
function = "gsbi4";
@@ -54,6 +61,25 @@
bias-none;
};
};
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ rgmii2_pins: rgmii2_pins {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
+ function = "rgmii2";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
};
gsbi@16300000 {
@@ -89,6 +115,7 @@
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
+ m25p,fast-read;
partition@0 {
label = "lowlevel_init";
@@ -163,5 +190,66 @@
pinctrl-0 = <&pcie2_pins>;
pinctrl-names = "default";
};
+
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
+
+ phy0: ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ device_type = "ethernet-phy";
+ reg = <4>;
+ };
+ };
+
+ nss-gmac-common {
+ reg = <0x03000000 0x0000FFFF 0x1bb00000 0x0000FFFF 0x00900000 0x00004000>;
+ reg-names = "nss_reg_base" , "qsgmii_reg_base", "clk_ctl_base";
+ };
+
+ gmac1: ethernet@37200000 {
+ status = "ok";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+ qcom,phy_mdio_addr = <4>;
+ qcom,poll_required = <1>;
+ qcom,rgmii_delay = <0>;
+ qcom,emulation = <0>;
+ qcom,forced_speed = <1000>;
+ qcom,forced_duplex = <1>;
+ qcom,socver = <0>;
+ local-mac-address = [000000000000];
+ mdiobus = <&mdio0>;
+ };
+
+ gmac2: ethernet@37400000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+ qcom,phy_mdio_addr = <0>;
+ qcom,poll_required = <0>;
+ qcom,rgmii_delay = <0>;
+ qcom,emulation = <0>;
+ qcom,forced_speed = <1000>;
+ qcom,forced_duplex = <1>;
+ qcom,socver = <0>;
+ local-mac-address = [000000000000];
+ mdiobus = <&mdio0>;
+ };
};
};
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -637,5 +638,42 @@
dr_mode = "host";
};
};
+
+ nss-gmac-common {
+ reg = <0x03000000 0x0000FFFF 0x1bb00000 0x0000FFFF 0x00900000 0x00004000>;
+ reg-names = "nss_reg_base" , "qsgmii_reg_base", "clk_ctl_base";
+ };
+
+ gmac0: ethernet@37000000 {
+ device_type = "network";
+ compatible = "qcom,nss-gmac";
+ reg = <0x37000000 0x200000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ gmac1: ethernet@37200000 {
+ device_type = "network";
+ compatible = "qcom,nss-gmac";
+ reg = <0x37200000 0x200000>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ gmac2: ethernet@37400000 {
+ device_type = "network";
+ compatible = "qcom,nss-gmac";
+ reg = <0x37400000 0x200000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ gmac3: ethernet@37600000 {
+ device_type = "network";
+ compatible = "qcom,nss-gmac";
+ reg = <0x37600000 0x200000>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
};
};

View File

@ -0,0 +1,733 @@
From 2fbb18f85826a9ba308fedb2cf90d3a661a39fd7 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Fri, 27 Mar 2015 00:16:14 -0700
Subject: [PATCH] clk: qcom: Add support for NSS/GMAC clocks and resets
Add the NSS/GMAC clocks and the TCM clock and NSS resets.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/qcom/gcc-ipq806x.c | 594 ++++++++++++++++++++++++++-
drivers/clk/qcom/gcc-ipq806x.c.rej | 50 +++
include/dt-bindings/clock/qcom,gcc-ipq806x.h | 2 +
include/dt-bindings/reset/qcom,gcc-ipq806x.h | 43 ++
4 files changed, 688 insertions(+), 1 deletion(-)
create mode 100644 drivers/clk/qcom/gcc-ipq806x.c.rej
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -209,11 +209,46 @@ static struct clk_regmap pll14_vote = {
},
};
+#define NSS_PLL_RATE(f, _l, _m, _n, i) \
+ { \
+ .freq = f, \
+ .l = _l, \
+ .m = _m, \
+ .n = _n, \
+ .ibits = i, \
+ }
+
+static struct pll_freq_tbl pll18_freq_tbl[] = {
+ NSS_PLL_RATE(550000000, 44, 0, 1, 0x01495625),
+ NSS_PLL_RATE(733000000, 58, 16, 25, 0x014b5625),
+};
+
+static struct clk_pll pll18 = {
+ .l_reg = 0x31a4,
+ .m_reg = 0x31a8,
+ .n_reg = 0x31ac,
+ .config_reg = 0x31b4,
+ .mode_reg = 0x31a0,
+ .status_reg = 0x31b8,
+ .status_bit = 16,
+ .post_div_shift = 16,
+ .post_div_width = 1,
+ .freq_tbl = pll18_freq_tbl,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "pll18",
+ .parent_names = (const char *[]){ "pxo" },
+ .num_parents = 1,
+ .ops = &clk_pll_ops,
+ },
+};
+
#define P_PXO 0
#define P_PLL8 1
#define P_PLL3 1
#define P_PLL0 2
#define P_CXO 2
+#define P_PLL14 3
+#define P_PLL18 4
static const u8 gcc_pxo_pll8_map[] = {
[P_PXO] = 0,
@@ -264,6 +299,22 @@ static const char *gcc_pxo_pll8_pll0_map
"pll0_vote",
};
+static const u8 gcc_pxo_pll8_pll14_pll18_pll0_map[] = {
+ [P_PXO] = 0 ,
+ [P_PLL8] = 4,
+ [P_PLL0] = 2,
+ [P_PLL14] = 5,
+ [P_PLL18] = 1,
+};
+
+static const char *gcc_pxo_pll8_pll14_pll18_pll0[] = {
+ "pxo",
+ "pll8_vote",
+ "pll0_vote",
+ "pll14",
+ "pll18",
+};
+
static struct freq_tbl clk_tbl_gsbi_uart[] = {
{ 1843200, P_PLL8, 2, 6, 625 },
{ 3686400, P_PLL8, 2, 12, 625 },
@@ -2239,6 +2290,472 @@ static struct clk_branch usb_fs1_h_clk =
},
};
+static const struct freq_tbl clk_tbl_gmac[] = {
+ { 133000000, P_PLL0, 1, 50, 301 },
+ { 266000000, P_PLL0, 1, 127, 382 },
+ { }
+};
+
+static struct clk_dyn_rcg gmac_core1_src = {
+ .ns_reg[0] = 0x3cac,
+ .ns_reg[1] = 0x3cb0,
+ .md_reg[0] = 0x3ca4,
+ .md_reg[1] = 0x3ca8,
+ .bank_reg = 0x3ca0,
+ .mn[0] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .mn[1] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_gmac,
+ .clkr = {
+ .enable_reg = 0x3ca0,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core1_src",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ },
+ },
+};
+
+static struct clk_branch gmac_core1_clk = {
+ .halt_reg = 0x3c20,
+ .halt_bit = 4,
+ .hwcg_reg = 0x3cb4,
+ .hwcg_bit = 6,
+ .clkr = {
+ .enable_reg = 0x3cb4,
+ .enable_mask = BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core1_clk",
+ .parent_names = (const char *[]){
+ "gmac_core1_src",
+ },
+ .num_parents = 1,
+ .ops = &clk_branch_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static struct clk_dyn_rcg gmac_core2_src = {
+ .ns_reg[0] = 0x3ccc,
+ .ns_reg[1] = 0x3cd0,
+ .md_reg[0] = 0x3cc4,
+ .md_reg[1] = 0x3cc8,
+ .bank_reg = 0x3ca0,
+ .mn[0] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .mn[1] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_gmac,
+ .clkr = {
+ .enable_reg = 0x3cc0,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core2_src",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ },
+ },
+};
+
+static struct clk_branch gmac_core2_clk = {
+ .halt_reg = 0x3c20,
+ .halt_bit = 5,
+ .hwcg_reg = 0x3cd4,
+ .hwcg_bit = 6,
+ .clkr = {
+ .enable_reg = 0x3cd4,
+ .enable_mask = BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core2_clk",
+ .parent_names = (const char *[]){
+ "gmac_core2_src",
+ },
+ .num_parents = 1,
+ .ops = &clk_branch_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static struct clk_dyn_rcg gmac_core3_src = {
+ .ns_reg[0] = 0x3cec,
+ .ns_reg[1] = 0x3cf0,
+ .md_reg[0] = 0x3ce4,
+ .md_reg[1] = 0x3ce8,
+ .bank_reg = 0x3ce0,
+ .mn[0] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .mn[1] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_gmac,
+ .clkr = {
+ .enable_reg = 0x3ce0,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core3_src",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ },
+ },
+};
+
+static struct clk_branch gmac_core3_clk = {
+ .halt_reg = 0x3c20,
+ .halt_bit = 6,
+ .hwcg_reg = 0x3cf4,
+ .hwcg_bit = 6,
+ .clkr = {
+ .enable_reg = 0x3cf4,
+ .enable_mask = BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core3_clk",
+ .parent_names = (const char *[]){
+ "gmac_core3_src",
+ },
+ .num_parents = 1,
+ .ops = &clk_branch_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static struct clk_dyn_rcg gmac_core4_src = {
+ .ns_reg[0] = 0x3d0c,
+ .ns_reg[1] = 0x3d10,
+ .md_reg[0] = 0x3d04,
+ .md_reg[1] = 0x3d08,
+ .bank_reg = 0x3d00,
+ .mn[0] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .mn[1] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_gmac,
+ .clkr = {
+ .enable_reg = 0x3d00,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core4_src",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ },
+ },
+};
+
+static struct clk_branch gmac_core4_clk = {
+ .halt_reg = 0x3c20,
+ .halt_bit = 7,
+ .hwcg_reg = 0x3d14,
+ .hwcg_bit = 6,
+ .clkr = {
+ .enable_reg = 0x3d14,
+ .enable_mask = BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core4_clk",
+ .parent_names = (const char *[]){
+ "gmac_core4_src",
+ },
+ .num_parents = 1,
+ .ops = &clk_branch_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static const struct freq_tbl clk_tbl_nss_tcm[] = {
+ { 266000000, P_PLL0, 3, 0, 0 },
+ { 400000000, P_PLL0, 2, 0, 0 },
+ { }
+};
+
+static struct clk_dyn_rcg nss_tcm_src = {
+ .ns_reg[0] = 0x3dc4,
+ .ns_reg[1] = 0x3dc8,
+ .bank_reg = 0x3dc0,
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 4,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 4,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_nss_tcm,
+ .clkr = {
+ .enable_reg = 0x3dc0,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "nss_tcm_src",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ },
+ },
+};
+
+static struct clk_branch nss_tcm_clk = {
+ .halt_reg = 0x3c20,
+ .halt_bit = 14,
+ .clkr = {
+ .enable_reg = 0x3dd0,
+ .enable_mask = BIT(6) | BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "nss_tcm_clk",
+ .parent_names = (const char *[]){
+ "nss_tcm_src",
+ },
+ .num_parents = 1,
+ .ops = &clk_branch_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static const struct freq_tbl clk_tbl_nss[] = {
+ { 110000000, P_PLL18, 1, 1, 5 },
+ { 275000000, P_PLL18, 2, 0, 0 },
+ { 550000000, P_PLL18, 1, 0, 0 },
+ { 733000000, P_PLL18, 1, 0, 0 },
+ { }
+};
+
+static struct clk_dyn_rcg ubi32_core1_src_clk = {
+ .ns_reg[0] = 0x3d2c,
+ .ns_reg[1] = 0x3d30,
+ .md_reg[0] = 0x3d24,
+ .md_reg[1] = 0x3d28,
+ .bank_reg = 0x3d20,
+ .mn[0] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .mn[1] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_nss,
+ .clkr = {
+ .enable_reg = 0x3d20,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "ubi32_core1_src_clk",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+ },
+ },
+};
+
+static struct clk_dyn_rcg ubi32_core2_src_clk = {
+ .ns_reg[0] = 0x3d4c,
+ .ns_reg[1] = 0x3d50,
+ .md_reg[0] = 0x3d44,
+ .md_reg[1] = 0x3d48,
+ .bank_reg = 0x3d40,
+ .mn[0] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .mn[1] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_nss,
+ .clkr = {
+ .enable_reg = 0x3d40,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "ubi32_core2_src_clk",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+ },
+ },
+};
+
static struct clk_regmap *gcc_ipq806x_clks[] = {
[PLL0] = &pll0.clkr,
[PLL0_VOTE] = &pll0_vote,
@@ -2247,6 +2764,7 @@ static struct clk_regmap *gcc_ipq806x_cl
[PLL8_VOTE] = &pll8_vote,
[PLL14] = &pll14.clkr,
[PLL14_VOTE] = &pll14_vote,
+ [PLL18] = &pll18.clkr,
[GSBI1_UART_SRC] = &gsbi1_uart_src.clkr,
[GSBI1_UART_CLK] = &gsbi1_uart_clk.clkr,
[GSBI2_UART_SRC] = &gsbi2_uart_src.clkr,
@@ -2344,6 +2862,18 @@ static struct clk_regmap *gcc_ipq806x_cl
[PLL9] = &hfpll0.clkr,
[PLL10] = &hfpll1.clkr,
[PLL12] = &hfpll_l2.clkr,
+ [GMAC_CORE1_CLK_SRC] = &gmac_core1_src.clkr,
+ [GMAC_CORE1_CLK] = &gmac_core1_clk.clkr,
+ [GMAC_CORE2_CLK_SRC] = &gmac_core2_src.clkr,
+ [GMAC_CORE2_CLK] = &gmac_core2_clk.clkr,
+ [GMAC_CORE3_CLK_SRC] = &gmac_core3_src.clkr,
+ [GMAC_CORE3_CLK] = &gmac_core3_clk.clkr,
+ [GMAC_CORE4_CLK_SRC] = &gmac_core4_src.clkr,
+ [GMAC_CORE4_CLK] = &gmac_core4_clk.clkr,
+ [UBI32_CORE1_CLK_SRC] = &ubi32_core1_src_clk.clkr,
+ [UBI32_CORE2_CLK_SRC] = &ubi32_core2_src_clk.clkr,
+ [NSSTCM_CLK_SRC] = &nss_tcm_src.clkr,
+ [NSSTCM_CLK] = &nss_tcm_clk.clkr,
};
static const struct qcom_reset_map gcc_ipq806x_resets[] = {
@@ -2462,6 +2992,48 @@ static const struct qcom_reset_map gcc_i
[USB30_1_PHY_RESET] = { 0x3b58, 0 },
[NSSFB0_RESET] = { 0x3b60, 6 },
[NSSFB1_RESET] = { 0x3b60, 7 },
+ [UBI32_CORE1_CLKRST_CLAMP_RESET] = { 0x3d3c, 3},
+ [UBI32_CORE1_CLAMP_RESET] = { 0x3d3c, 2 },
+ [UBI32_CORE1_AHB_RESET] = { 0x3d3c, 1 },
+ [UBI32_CORE1_AXI_RESET] = { 0x3d3c, 0 },
+ [UBI32_CORE2_CLKRST_CLAMP_RESET] = { 0x3d5c, 3 },
+ [UBI32_CORE2_CLAMP_RESET] = { 0x3d5c, 2 },
+ [UBI32_CORE2_AHB_RESET] = { 0x3d5c, 1 },
+ [UBI32_CORE2_AXI_RESET] = { 0x3d5c, 0 },
+ [GMAC_CORE1_RESET] = { 0x3cbc, 0 },
+ [GMAC_CORE2_RESET] = { 0x3cdc, 0 },
+ [GMAC_CORE3_RESET] = { 0x3cfc, 0 },
+ [GMAC_CORE4_RESET] = { 0x3d1c, 0 },
+ [GMAC_AHB_RESET] = { 0x3e24, 0 },
+ [NSS_CH0_RST_RX_CLK_N_RESET] = { 0x3b60, 0 },
+ [NSS_CH0_RST_TX_CLK_N_RESET] = { 0x3b60, 1 },
+ [NSS_CH0_RST_RX_125M_N_RESET] = { 0x3b60, 2 },
+ [NSS_CH0_HW_RST_RX_125M_N_RESET] = { 0x3b60, 3 },
+ [NSS_CH0_RST_TX_125M_N_RESET] = { 0x3b60, 4 },
+ [NSS_CH1_RST_RX_CLK_N_RESET] = { 0x3b60, 5 },
+ [NSS_CH1_RST_TX_CLK_N_RESET] = { 0x3b60, 6 },
+ [NSS_CH1_RST_RX_125M_N_RESET] = { 0x3b60, 7 },
+ [NSS_CH1_HW_RST_RX_125M_N_RESET] = { 0x3b60, 8 },
+ [NSS_CH1_RST_TX_125M_N_RESET] = { 0x3b60, 9 },
+ [NSS_CH2_RST_RX_CLK_N_RESET] = { 0x3b60, 10 },
+ [NSS_CH2_RST_TX_CLK_N_RESET] = { 0x3b60, 11 },
+ [NSS_CH2_RST_RX_125M_N_RESET] = { 0x3b60, 12 },
+ [NSS_CH2_HW_RST_RX_125M_N_RESET] = { 0x3b60, 13 },
+ [NSS_CH2_RST_TX_125M_N_RESET] = { 0x3b60, 14 },
+ [NSS_CH3_RST_RX_CLK_N_RESET] = { 0x3b60, 15 },
+ [NSS_CH3_RST_TX_CLK_N_RESET] = { 0x3b60, 16 },
+ [NSS_CH3_RST_RX_125M_N_RESET] = { 0x3b60, 17 },
+ [NSS_CH3_HW_RST_RX_125M_N_RESET] = { 0x3b60, 18 },
+ [NSS_CH3_RST_TX_125M_N_RESET] = { 0x3b60, 19 },
+ [NSS_RST_RX_250M_125M_N_RESET] = { 0x3b60, 20 },
+ [NSS_RST_TX_250M_125M_N_RESET] = { 0x3b60, 21 },
+ [NSS_QSGMII_TXPI_RST_N_RESET] = { 0x3b60, 22 },
+ [NSS_QSGMII_CDR_RST_N_RESET] = { 0x3b60, 23 },
+ [NSS_SGMII2_CDR_RST_N_RESET] = { 0x3b60, 24 },
+ [NSS_SGMII3_CDR_RST_N_RESET] = { 0x3b60, 25 },
+ [NSS_CAL_PRBS_RST_N_RESET] = { 0x3b60, 26 },
+ [NSS_LCKDT_RST_N_RESET] = { 0x3b60, 27 },
+ [NSS_SRDS_N_RESET] = { 0x3b60, 28 },
};
static const struct regmap_config gcc_ipq806x_regmap_config = {
@@ -2490,6 +3062,8 @@ static int gcc_ipq806x_probe(struct plat
{
struct clk *clk;
struct device *dev = &pdev->dev;
+ struct regmap *regmap;
+ int ret;
/* Temporary until RPM clocks supported */
clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 25000000);
@@ -2500,7 +3074,25 @@ static int gcc_ipq806x_probe(struct plat
if (IS_ERR(clk))
return PTR_ERR(clk);
- return qcom_cc_probe(pdev, &gcc_ipq806x_desc);
+ ret = qcom_cc_probe(pdev, &gcc_ipq806x_desc);
+ if (ret)
+ return ret;
+
+ regmap = dev_get_regmap(dev, NULL);
+ if (!regmap)
+ return -ENODEV;
+
+ /* Setup PLL18 static bits */
+ regmap_update_bits(regmap, 0x31a4, 0xffffffc0, 0x40000400);
+ regmap_write(regmap, 0x31b0, 0x3080);
+
+ /* Set GMAC footswitch sleep/wakeup values */
+ regmap_write(regmap, 0x3cb8, 8);
+ regmap_write(regmap, 0x3cd8, 8);
+ regmap_write(regmap, 0x3cf8, 8);
+ regmap_write(regmap, 0x3d18, 8);
+
+ return 0;
}
static int gcc_ipq806x_remove(struct platform_device *pdev)
--- a/include/dt-bindings/clock/qcom,gcc-ipq806x.h
+++ b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
@@ -289,5 +289,7 @@
#define UBI32_CORE2_CLK_SRC 278
#define UBI32_CORE1_CLK 279
#define UBI32_CORE2_CLK 280
+#define NSSTCM_CLK_SRC 281
+#define NSSTCM_CLK 282
#endif
--- a/include/dt-bindings/reset/qcom,gcc-ipq806x.h
+++ b/include/dt-bindings/reset/qcom,gcc-ipq806x.h
@@ -129,4 +129,47 @@
#define USB30_1_PHY_RESET 112
#define NSSFB0_RESET 113
#define NSSFB1_RESET 114
+#define UBI32_CORE1_CLKRST_CLAMP_RESET 115
+#define UBI32_CORE1_CLAMP_RESET 116
+#define UBI32_CORE1_AHB_RESET 117
+#define UBI32_CORE1_AXI_RESET 118
+#define UBI32_CORE2_CLKRST_CLAMP_RESET 119
+#define UBI32_CORE2_CLAMP_RESET 120
+#define UBI32_CORE2_AHB_RESET 121
+#define UBI32_CORE2_AXI_RESET 122
+#define GMAC_CORE1_RESET 123
+#define GMAC_CORE2_RESET 124
+#define GMAC_CORE3_RESET 125
+#define GMAC_CORE4_RESET 126
+#define GMAC_AHB_RESET 127
+#define NSS_CH0_RST_RX_CLK_N_RESET 128
+#define NSS_CH0_RST_TX_CLK_N_RESET 129
+#define NSS_CH0_RST_RX_125M_N_RESET 130
+#define NSS_CH0_HW_RST_RX_125M_N_RESET 131
+#define NSS_CH0_RST_TX_125M_N_RESET 132
+#define NSS_CH1_RST_RX_CLK_N_RESET 133
+#define NSS_CH1_RST_TX_CLK_N_RESET 134
+#define NSS_CH1_RST_RX_125M_N_RESET 135
+#define NSS_CH1_HW_RST_RX_125M_N_RESET 136
+#define NSS_CH1_RST_TX_125M_N_RESET 137
+#define NSS_CH2_RST_RX_CLK_N_RESET 138
+#define NSS_CH2_RST_TX_CLK_N_RESET 139
+#define NSS_CH2_RST_RX_125M_N_RESET 140
+#define NSS_CH2_HW_RST_RX_125M_N_RESET 141
+#define NSS_CH2_RST_TX_125M_N_RESET 142
+#define NSS_CH3_RST_RX_CLK_N_RESET 143
+#define NSS_CH3_RST_TX_CLK_N_RESET 144
+#define NSS_CH3_RST_RX_125M_N_RESET 145
+#define NSS_CH3_HW_RST_RX_125M_N_RESET 146
+#define NSS_CH3_RST_TX_125M_N_RESET 147
+#define NSS_RST_RX_250M_125M_N_RESET 148
+#define NSS_RST_TX_250M_125M_N_RESET 149
+#define NSS_QSGMII_TXPI_RST_N_RESET 150
+#define NSS_QSGMII_CDR_RST_N_RESET 151
+#define NSS_SGMII2_CDR_RST_N_RESET 152
+#define NSS_SGMII3_CDR_RST_N_RESET 153
+#define NSS_CAL_PRBS_RST_N_RESET 154
+#define NSS_LCKDT_RST_N_RESET 155
+#define NSS_SRDS_N_RESET 156
+
#endif

View File

@ -0,0 +1,105 @@
From 4f09499bc1d9bb095caccbcd73ff951ee631e521 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Fri, 8 May 2015 15:42:40 -0700
Subject: [PATCH 1/8] stmmac: add phy-handle support to the platform layer
On stmmac driver, PHY specification in device-tree was done using the
non-standard property "snps,phy-addr". Specifying a PHY on a different
MDIO bus that the one within the stmmac controller doesn't seem to be
possible when device-tree is used.
This change adds support for the phy-handle property, as specified in
Documentation/devicetree/bindings/net/ethernet.txt.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 28 ++++++++++++++--------
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 6 ++++-
include/linux/stmmac.h | 1 +
3 files changed, 24 insertions(+), 11 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -52,6 +52,7 @@
#include "stmmac_ptp.h"
#include "stmmac.h"
#include <linux/reset.h>
+#include <linux/of_mdio.h>
#define STMMAC_ALIGN(x) L1_CACHE_ALIGN(x)
@@ -818,18 +819,25 @@ static int stmmac_init_phy(struct net_de
priv->speed = 0;
priv->oldduplex = -1;
- if (priv->plat->phy_bus_name)
- snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x",
- priv->plat->phy_bus_name, priv->plat->bus_id);
- else
- snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
- priv->plat->bus_id);
-
- snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
- priv->plat->phy_addr);
- pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id_fmt);
+ if (priv->plat->phy_node) {
+ phydev = of_phy_connect(dev, priv->plat->phy_node,
+ &stmmac_adjust_link, 0, interface);
+ } else {
+ if (priv->plat->phy_bus_name)
+ snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x",
+ priv->plat->phy_bus_name, priv->plat->bus_id);
+ else
+ snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
+ priv->plat->bus_id);
+
+ snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
+ priv->plat->phy_addr);
+ pr_debug("stmmac_init_phy: trying to attach to %s\n",
+ phy_id_fmt);
- phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link, interface);
+ phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link,
+ interface);
+ }
if (IS_ERR(phydev)) {
pr_err("%s: Could not attach to PHY\n", dev->name);
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -27,6 +27,7 @@
#include <linux/of.h>
#include <linux/of_net.h>
#include <linux/of_device.h>
+#include <linux/of_mdio.h>
#include "stmmac.h"
static const struct of_device_id stmmac_dt_ids[] = {
@@ -155,13 +156,16 @@ static int stmmac_probe_config_dt(struct
/* Default to phy auto-detection */
plat->phy_addr = -1;
+ /* If we find a phy-handle property, use it as the PHY */
+ plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
+
/* "snps,phy-addr" is not a standard property. Mark it as deprecated
* and warn of its use. Remove this when phy node support is added.
*/
if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
- if (plat->phy_bus_name)
+ if (plat->phy_node || plat->phy_bus_name)
plat->mdio_bus_data = NULL;
else
plat->mdio_bus_data =
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -99,6 +99,7 @@ struct plat_stmmacenet_data {
int phy_addr;
int interface;
struct stmmac_mdio_bus_data *mdio_bus_data;
+ struct device_node *phy_node;
struct stmmac_dma_cfg *dma_cfg;
int clk_csr;
int has_gmac;

View File

@ -0,0 +1,65 @@
From 0149d275415cd1b2382ce94e5eb32641590097d0 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Fri, 8 May 2015 15:57:12 -0700
Subject: [PATCH 2/8] stmmac: move error path at the end of
stmmac_probe_config_dt()
We will want to do additional clean-up on certain errors. Therefore,
this change moves the error path at the end of the function for better
code readability.
This patch doesn't change anything functionally.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -117,13 +117,18 @@ static int stmmac_probe_config_dt(struct
struct device_node *np = pdev->dev.of_node;
struct stmmac_dma_cfg *dma_cfg;
const struct of_device_id *device;
+ int ret;
- if (!np)
- return -ENODEV;
+ if (!np) {
+ ret = -ENODEV;
+ goto err;
+ }
device = of_match_device(stmmac_dt_ids, &pdev->dev);
- if (!device)
- return -ENODEV;
+ if (!device) {
+ ret = -ENODEV;
+ goto err;
+ }
if (device->data) {
const struct stmmac_of_data *data = device->data;
@@ -219,8 +224,10 @@ static int stmmac_probe_config_dt(struct
if (of_find_property(np, "snps,pbl", NULL)) {
dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg),
GFP_KERNEL);
- if (!dma_cfg)
- return -ENOMEM;
+ if (!dma_cfg) {
+ ret = -ENOMEM;
+ goto err;
+ }
plat->dma_cfg = dma_cfg;
of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
dma_cfg->fixed_burst =
@@ -235,6 +242,9 @@ static int stmmac_probe_config_dt(struct
}
return 0;
+
+err:
+ return ret;
}
#else
static int stmmac_probe_config_dt(struct platform_device *pdev,

View File

@ -0,0 +1,64 @@
From 3a95f75867be562cb919ff23a738f70357188fbd Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Fri, 8 May 2015 16:02:03 -0700
Subject: [PATCH 3/8] stmmac: add fixed-link device-tree support
In case DT is used, this change adds the ability to the stmmac driver to
detect a fixed-link PHY, instanciate it, and use it during
phy_connect().
Fixed link PHYs DT usage is described in:
Documentation/devicetree/bindings/net/fixed-link.txt
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +-
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 12 +++++++++++-
2 files changed, 12 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -858,7 +858,7 @@ static int stmmac_init_phy(struct net_de
* device as well.
* Note: phydev->phy_id is the result of reading the UID PHY registers.
*/
- if (phydev->phy_id == 0) {
+ if (!priv->plat->phy_node && phydev->phy_id == 0) {
phy_disconnect(phydev);
return -ENODEV;
}
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -164,6 +164,14 @@ static int stmmac_probe_config_dt(struct
/* If we find a phy-handle property, use it as the PHY */
plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
+ /* If phy-handle is not specified, check if we have a fixed-phy */
+ if (!plat->phy_node && of_phy_is_fixed_link(np)) {
+ if ((of_phy_register_fixed_link(np) < 0))
+ return -ENODEV;
+
+ plat->phy_node = of_node_get(np);
+ }
+
/* "snps,phy-addr" is not a standard property. Mark it as deprecated
* and warn of its use. Remove this when phy node support is added.
*/
@@ -226,7 +234,7 @@ static int stmmac_probe_config_dt(struct
GFP_KERNEL);
if (!dma_cfg) {
ret = -ENOMEM;
- goto err;
+ goto err2;
}
plat->dma_cfg = dma_cfg;
of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
@@ -243,6 +251,8 @@ static int stmmac_probe_config_dt(struct
return 0;
+err2:
+ of_node_put(np);
err:
return ret;
}

View File

@ -0,0 +1,427 @@
From 69fb970ad3fe05af7cb99ea78230c69c7ca0d03b Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Fri, 8 May 2015 16:10:22 -0700
Subject: [PATCH 4/8] stmmac: add ipq806x glue layer
The ethernet controller available in IPQ806x is a Synopsys DesignWare
Gigabit MAC IP core, already supported by the stmmac driver.
This glue layer implements some platform specific settings required to
get the controller working on an IPQ806x based platform.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
drivers/net/ethernet/stmicro/stmmac/Kconfig | 1 +
drivers/net/ethernet/stmicro/stmmac/Makefile | 2 +-
drivers/net/ethernet/stmicro/stmmac/dwmac-ipq.c | 324 +++++++++++++++++++++
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 +
.../net/ethernet/stmicro/stmmac/stmmac_platform.h | 1 +
5 files changed, 328 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-ipq.c
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -16,6 +16,7 @@ if STMMAC_ETH
config STMMAC_PLATFORM
bool "STMMAC Platform bus support"
depends on STMMAC_ETH
+ select MFD_SYSCON
default y
---help---
This selects the platform specific bus support for
@@ -26,6 +27,15 @@ config STMMAC_PLATFORM
If unsure, say N.
+config DWMAC_IPQ806X
+ bool "QCA IPQ806x dwmac support"
+ depends on STMMAC_PLATFORM && ARCH_QCOM
+ help
+ Support for Ethernet controller on QCA IPQ806x SoC.
+
+ This selects the QCA IPQ806x SoC glue layer support for
+ the stmmac device driver.
+
config DWMAC_MESON
bool "Amlogic Meson dwmac support"
depends on STMMAC_PLATFORM && ARCH_MESON
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -1,6 +1,7 @@
obj-$(CONFIG_STMMAC_ETH) += stmmac.o
stmmac-$(CONFIG_STMMAC_PLATFORM) += stmmac_platform.o
stmmac-$(CONFIG_STMMAC_PCI) += stmmac_pci.o
+stmmac-$(CONFIG_DWMAC_IPQ806X) += dwmac-ipq806x.o
stmmac-$(CONFIG_DWMAC_MESON) += dwmac-meson.o
stmmac-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o
stmmac-$(CONFIG_DWMAC_STI) += dwmac-sti.o
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -46,6 +46,9 @@ static const struct of_device_id stmmac_
#ifdef CONFIG_DWMAC_SOCFPGA
{ .compatible = "altr,socfpga-stmmac", .data = &socfpga_gmac_data },
#endif
+#ifdef CONFIG_DWMAC_IPQ806X
+ { .compatible = "qcom,ipq806x-gmac", .data = &ipq806x_gmac_data },
+#endif
/* SoC specific glue layers should come before generic bindings */
{ .compatible = "st,spear600-gmac"},
{ .compatible = "snps,dwmac-3.610"},
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
@@ -0,0 +1,343 @@
+/*
+ * Qualcomm Atheros IPQ806x GMAC glue layer
+ *
+ * Copyright (C) 2015 The Linux Foundation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/phy.h>
+#include <linux/regmap.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
+#include <linux/of_net.h>
+#include <linux/mfd/syscon.h>
+#include <linux/stmmac.h>
+#include <linux/of_mdio.h>
+
+#include "stmmac.h"
+
+#define NSS_COMMON_CLK_GATE 0x8
+#define NSS_COMMON_CLK_GATE_PTP_EN(x) BIT(0x10 + x)
+#define NSS_COMMON_CLK_GATE_RGMII_RX_EN(x) BIT(0x9 + (x * 2))
+#define NSS_COMMON_CLK_GATE_RGMII_TX_EN(x) BIT(0x8 + (x * 2))
+#define NSS_COMMON_CLK_GATE_GMII_RX_EN(x) BIT(0x4 + x)
+#define NSS_COMMON_CLK_GATE_GMII_TX_EN(x) BIT(0x0 + x)
+
+#define NSS_COMMON_CLK_DIV0 0xC
+#define NSS_COMMON_CLK_DIV_OFFSET(x) (x * 8)
+#define NSS_COMMON_CLK_DIV_MASK 0x7f
+
+#define NSS_COMMON_CLK_SRC_CTRL 0x14
+#define NSS_COMMON_CLK_SRC_CTRL_OFFSET(x) (1 << x)
+/* Mode is coded on 1 bit but is different depending on the MAC ID:
+ * MAC0: QSGMII=0 RGMII=1
+ * MAC1: QSGMII=0 SGMII=0 RGMII=1
+ * MAC2 & MAC3: QSGMII=0 SGMII=1
+ */
+#define NSS_COMMON_CLK_SRC_CTRL_RGMII(x) 1
+#define NSS_COMMON_CLK_SRC_CTRL_SGMII(x) ((x >= 2) ? 1 : 0)
+
+#define NSS_COMMON_MACSEC_CTL 0x28
+#define NSS_COMMON_MACSEC_CTL_EXT_BYPASS_EN(x) (1 << x)
+
+#define NSS_COMMON_GMAC_CTL(x) (0x30 + (x * 4))
+#define NSS_COMMON_GMAC_CTL_CSYS_REQ BIT(19)
+#define NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL BIT(16)
+#define NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET 8
+#define NSS_COMMON_GMAC_CTL_IFG_OFFSET 0
+#define NSS_COMMON_GMAC_CTL_IFG_MASK 0x3f
+
+#define NSS_COMMON_CLK_DIV_RGMII_1000 1
+#define NSS_COMMON_CLK_DIV_RGMII_100 9
+#define NSS_COMMON_CLK_DIV_RGMII_10 99
+#define NSS_COMMON_CLK_DIV_SGMII_1000 0
+#define NSS_COMMON_CLK_DIV_SGMII_100 4
+#define NSS_COMMON_CLK_DIV_SGMII_10 49
+
+#define QSGMII_PCS_MODE_CTL 0x68
+#define QSGMII_PCS_MODE_CTL_AUTONEG_EN(x) BIT((x * 8) + 7)
+
+#define QSGMII_PCS_CAL_LCKDT_CTL 0x120
+#define QSGMII_PCS_CAL_LCKDT_CTL_RST BIT(19)
+
+/* Only GMAC1/2/3 support SGMII and their CTL register are not contiguous */
+#define QSGMII_PHY_SGMII_CTL(x) ((x == 1) ? 0x134 : \
+ (0x13c + (4 * (x - 2))))
+#define QSGMII_PHY_CDR_EN BIT(0)
+#define QSGMII_PHY_RX_FRONT_EN BIT(1)
+#define QSGMII_PHY_RX_SIGNAL_DETECT_EN BIT(2)
+#define QSGMII_PHY_TX_DRIVER_EN BIT(3)
+#define QSGMII_PHY_QSGMII_EN BIT(7)
+#define QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET 12
+#define QSGMII_PHY_PHASE_LOOP_GAIN_MASK 0x7
+#define QSGMII_PHY_RX_DC_BIAS_OFFSET 18
+#define QSGMII_PHY_RX_DC_BIAS_MASK 0x3
+#define QSGMII_PHY_RX_INPUT_EQU_OFFSET 20
+#define QSGMII_PHY_RX_INPUT_EQU_MASK 0x3
+#define QSGMII_PHY_CDR_PI_SLEW_OFFSET 22
+#define QSGMII_PHY_CDR_PI_SLEW_MASK 0x3
+#define QSGMII_PHY_TX_DRV_AMP_OFFSET 28
+#define QSGMII_PHY_TX_DRV_AMP_MASK 0xf
+
+struct ipq806x_gmac {
+ struct platform_device *pdev;
+ struct regmap *nss_common;
+ struct regmap *qsgmii_csr;
+ uint32_t id;
+ struct clk *core_clk;
+ phy_interface_t phy_mode;
+};
+
+static int get_clk_div_sgmii(struct ipq806x_gmac *gmac, unsigned int speed)
+{
+ struct device *dev = &gmac->pdev->dev;
+ int div;
+
+ switch (speed) {
+ case SPEED_1000:
+ div = NSS_COMMON_CLK_DIV_SGMII_1000;
+ break;
+
+ case SPEED_100:
+ div = NSS_COMMON_CLK_DIV_SGMII_100;
+ break;
+
+ case SPEED_10:
+ div = NSS_COMMON_CLK_DIV_SGMII_10;
+ break;
+
+ default:
+ dev_err(dev, "Speed %dMbps not supported in SGMII\n", speed);
+ return -EINVAL;
+ }
+
+ return div;
+}
+
+static int get_clk_div_rgmii(struct ipq806x_gmac *gmac, unsigned int speed)
+{
+ struct device *dev = &gmac->pdev->dev;
+ int div;
+
+ switch (speed) {
+ case SPEED_1000:
+ div = NSS_COMMON_CLK_DIV_RGMII_1000;
+ break;
+
+ case SPEED_100:
+ div = NSS_COMMON_CLK_DIV_RGMII_100;
+ break;
+
+ case SPEED_10:
+ div = NSS_COMMON_CLK_DIV_RGMII_10;
+ break;
+
+ default:
+ dev_err(dev, "Speed %dMbps not supported in RGMII\n", speed);
+ return -EINVAL;
+ }
+
+ return div;
+}
+
+static int ipq806x_gmac_set_speed(struct ipq806x_gmac *gmac, unsigned int speed)
+{
+ uint32_t clk_bits, val;
+ int div;
+
+ switch (gmac->phy_mode) {
+ case PHY_INTERFACE_MODE_RGMII:
+ div = get_clk_div_rgmii(gmac, speed);
+ clk_bits = NSS_COMMON_CLK_GATE_RGMII_RX_EN(gmac->id) |
+ NSS_COMMON_CLK_GATE_RGMII_TX_EN(gmac->id);
+ break;
+
+ case PHY_INTERFACE_MODE_SGMII:
+ div = get_clk_div_sgmii(gmac, speed);
+ clk_bits = NSS_COMMON_CLK_GATE_GMII_RX_EN(gmac->id) |
+ NSS_COMMON_CLK_GATE_GMII_TX_EN(gmac->id);
+ break;
+
+ default:
+ dev_err(&gmac->pdev->dev, "Unsupported PHY mode: \"%s\"\n",
+ phy_modes(gmac->phy_mode));
+ return -EINVAL;
+ }
+
+ /* Disable the clocks */
+ regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
+ val &= ~clk_bits;
+ regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
+
+ /* Set the divider */
+ regmap_read(gmac->nss_common, NSS_COMMON_CLK_DIV0, &val);
+ val &= ~(NSS_COMMON_CLK_DIV_MASK
+ << NSS_COMMON_CLK_DIV_OFFSET(gmac->id));
+ val |= div << NSS_COMMON_CLK_DIV_OFFSET(gmac->id);
+ regmap_write(gmac->nss_common, NSS_COMMON_CLK_DIV0, val);
+
+ /* Enable the clock back */
+ regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
+ val |= clk_bits;
+ regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
+
+ return 0;
+}
+
+static void *ipq806x_gmac_of_parse(struct ipq806x_gmac *gmac)
+{
+ struct device *dev = &gmac->pdev->dev;
+
+ gmac->phy_mode = of_get_phy_mode(dev->of_node);
+ if (gmac->phy_mode < 0) {
+ dev_err(dev, "missing phy mode property\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (of_property_read_u32(dev->of_node, "qcom,id", &gmac->id) < 0) {
+ dev_err(dev, "missing qcom id property\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ /* The GMACs are called 1 to 4 in the documentation, but to simplify the
+ * code and keep it consistent with the Linux convention, we'll number
+ * them from 0 to 3 here.
+ */
+ if (gmac->id < 0 || gmac->id > 3) {
+ dev_err(dev, "invalid gmac id\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ gmac->core_clk = devm_clk_get(dev, "stmmaceth");
+ if (IS_ERR(gmac->core_clk)) {
+ dev_err(dev, "missing stmmaceth clk property\n");
+ return gmac->core_clk;
+ }
+ clk_set_rate(gmac->core_clk, 266000000);
+
+ /* Setup the register map for the nss common registers */
+ gmac->nss_common = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "qcom,nss-common");
+ if (IS_ERR(gmac->nss_common)) {
+ dev_err(dev, "missing nss-common node\n");
+ return gmac->nss_common;
+ }
+
+ /* Setup the register map for the qsgmii csr registers */
+ gmac->qsgmii_csr = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "qcom,qsgmii-csr");
+ if (IS_ERR(gmac->qsgmii_csr)) {
+ dev_err(dev, "missing qsgmii-csr node\n");
+ return gmac->qsgmii_csr;
+ }
+
+ return NULL;
+}
+
+static void *ipq806x_gmac_setup(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ipq806x_gmac *gmac;
+ int val;
+ void *err;
+
+ gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL);
+ if (!gmac)
+ return ERR_PTR(-ENOMEM);
+
+ gmac->pdev = pdev;
+
+ err = ipq806x_gmac_of_parse(gmac);
+ if (err) {
+ dev_err(dev, "device tree parsing error\n");
+ return err;
+ }
+
+ regmap_write(gmac->qsgmii_csr, QSGMII_PCS_CAL_LCKDT_CTL,
+ QSGMII_PCS_CAL_LCKDT_CTL_RST);
+
+ /* Inter frame gap is set to 12 */
+ val = 12 << NSS_COMMON_GMAC_CTL_IFG_OFFSET |
+ 12 << NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET;
+ /* We also initiate an AXI low power exit request */
+ val |= NSS_COMMON_GMAC_CTL_CSYS_REQ;
+ switch (gmac->phy_mode) {
+ case PHY_INTERFACE_MODE_RGMII:
+ val |= NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL;
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ val &= ~NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL;
+ break;
+ default:
+ dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
+ phy_modes(gmac->phy_mode));
+ return NULL;
+ }
+ regmap_write(gmac->nss_common, NSS_COMMON_GMAC_CTL(gmac->id), val);
+
+ /* Configure the clock src according to the mode */
+ regmap_read(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, &val);
+ val &= ~NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
+ switch (gmac->phy_mode) {
+ case PHY_INTERFACE_MODE_RGMII:
+ val |= NSS_COMMON_CLK_SRC_CTRL_RGMII(gmac->id) <<
+ NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ val |= NSS_COMMON_CLK_SRC_CTRL_SGMII(gmac->id) <<
+ NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
+ break;
+ default:
+ dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
+ phy_modes(gmac->phy_mode));
+ return NULL;
+ }
+ regmap_write(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, val);
+
+ /* Enable PTP clock */
+ regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
+ val |= NSS_COMMON_CLK_GATE_PTP_EN(gmac->id);
+ regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
+
+ if (gmac->phy_mode == PHY_INTERFACE_MODE_SGMII) {
+ regmap_write(gmac->qsgmii_csr, QSGMII_PHY_SGMII_CTL(gmac->id),
+ QSGMII_PHY_CDR_EN |
+ QSGMII_PHY_RX_FRONT_EN |
+ QSGMII_PHY_RX_SIGNAL_DETECT_EN |
+ QSGMII_PHY_TX_DRIVER_EN |
+ QSGMII_PHY_QSGMII_EN |
+ 0x4 << QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET |
+ 0x3 << QSGMII_PHY_RX_DC_BIAS_OFFSET |
+ 0x1 << QSGMII_PHY_RX_INPUT_EQU_OFFSET |
+ 0x2 << QSGMII_PHY_CDR_PI_SLEW_OFFSET |
+ 0xC << QSGMII_PHY_TX_DRV_AMP_OFFSET);
+ }
+
+ return gmac;
+}
+
+static void ipq806x_gmac_fix_mac_speed(void *priv, unsigned int speed)
+{
+ struct ipq806x_gmac *gmac = priv;
+
+ ipq806x_gmac_set_speed(gmac, speed);
+}
+
+const struct stmmac_of_data ipq806x_gmac_data = {
+ .has_gmac = 1,
+ .setup = ipq806x_gmac_setup,
+ .fix_mac_speed = ipq806x_gmac_fix_mac_speed,
+};
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -137,6 +137,9 @@ void stmmac_disable_eee_mode(struct stmm
bool stmmac_eee_init(struct stmmac_priv *priv);
#ifdef CONFIG_STMMAC_PLATFORM
+#ifdef CONFIG_DWMAC_IPQ806X
+extern const struct stmmac_of_data ipq806x_gmac_data;
+#endif
#ifdef CONFIG_DWMAC_MESON
extern const struct stmmac_of_data meson6_dwmac_data;
#endif

View File

@ -0,0 +1,52 @@
From 0f9605d9409b77a89daef91cc68239fc2ff50457 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Fri, 8 May 2015 16:51:25 -0700
Subject: [PATCH 5/8] net: stmmac: ipq806x: document device tree bindings
Add the device tree bindings documentation for the QCA IPQ806x
variant of the Synopsys DesignWare MAC.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
.../devicetree/bindings/net/ipq806x-dwmac.txt | 35 ++++++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/ipq806x-dwmac.txt
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ipq806x-dwmac.txt
@@ -0,0 +1,35 @@
+* IPQ806x DWMAC Ethernet controller
+
+The device inherits all the properties of the dwmac/stmmac devices
+described in the file net/stmmac.txt with the following changes.
+
+Required properties:
+
+- compatible: should be "qcom,ipq806x-gmac" along with "snps,dwmac"
+ and any applicable more detailed version number
+ described in net/stmmac.txt
+
+- qcom,nss-common: should contain a phandle to a syscon device mapping the
+ nss-common registers.
+
+- qcom,qsgmii-csr: should contain a phandle to a syscon device mapping the
+ qsgmii-csr registers.
+
+Example:
+
+ gmac: ethernet@37000000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac";
+ reg = <0x37000000 0x200000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE1_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE1_RESET>;
+ reset-names = "stmmaceth";
+ };

View File

@ -0,0 +1,171 @@
From df944689d491e6af533173bf2ef448c3dd334f15 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Mon, 11 May 2015 15:15:25 -0700
Subject: [PATCH 6/8] net: stmmac: create one debugfs dir per net-device
stmmac DebugFS entries are currently global to the driver. As a result,
having more than one stmmac device in the system creates the following
error:
* ERROR stmmaceth, debugfs create directory failed
* stmmac_hw_setup: failed debugFS registration
This also results in being able to access the debugfs information for
the first registered device only.
This patch changes the debugfs structure to have one sub-directory per
net-device. Files under "/sys/kernel/debug/stmmaceth" will now show-up
under /sys/kernel/debug/stmmaceth/ethN/.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 6 ++
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 76 ++++++++++++++++-------
2 files changed, 59 insertions(+), 23 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -116,6 +116,12 @@ struct stmmac_priv {
int use_riwt;
int irq_wake;
spinlock_t ptp_lock;
+
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *dbgfs_dir;
+ struct dentry *dbgfs_rings_status;
+ struct dentry *dbgfs_dma_cap;
+#endif
};
int stmmac_mdio_unregister(struct net_device *ndev);
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -119,7 +119,7 @@ static irqreturn_t stmmac_interrupt(int
#ifdef CONFIG_STMMAC_DEBUG_FS
static int stmmac_init_fs(struct net_device *dev);
-static void stmmac_exit_fs(void);
+static void stmmac_exit_fs(struct net_device *dev);
#endif
#define STMMAC_COAL_TIMER(x) (jiffies + usecs_to_jiffies(x))
@@ -1879,7 +1879,7 @@ static int stmmac_release(struct net_dev
netif_carrier_off(dev);
#ifdef CONFIG_STMMAC_DEBUG_FS
- stmmac_exit_fs();
+ stmmac_exit_fs(dev);
#endif
stmmac_release_ptp(priv);
@@ -2467,8 +2467,6 @@ static int stmmac_ioctl(struct net_devic
#ifdef CONFIG_STMMAC_DEBUG_FS
static struct dentry *stmmac_fs_dir;
-static struct dentry *stmmac_rings_status;
-static struct dentry *stmmac_dma_cap;
static void sysfs_display_ring(void *head, int size, int extend_desc,
struct seq_file *seq)
@@ -2607,36 +2605,39 @@ static const struct file_operations stmm
static int stmmac_init_fs(struct net_device *dev)
{
- /* Create debugfs entries */
- stmmac_fs_dir = debugfs_create_dir(STMMAC_RESOURCE_NAME, NULL);
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ /* Create per netdev entries */
+ priv->dbgfs_dir = debugfs_create_dir(dev->name, stmmac_fs_dir);
- if (!stmmac_fs_dir || IS_ERR(stmmac_fs_dir)) {
- pr_err("ERROR %s, debugfs create directory failed\n",
- STMMAC_RESOURCE_NAME);
+ if (!priv->dbgfs_dir || IS_ERR(priv->dbgfs_dir)) {
+ pr_err("ERROR %s/%s, debugfs create directory failed\n",
+ STMMAC_RESOURCE_NAME, dev->name);
return -ENOMEM;
}
/* Entry to report DMA RX/TX rings */
- stmmac_rings_status = debugfs_create_file("descriptors_status",
- S_IRUGO, stmmac_fs_dir, dev,
- &stmmac_rings_status_fops);
+ priv->dbgfs_rings_status =
+ debugfs_create_file("descriptors_status", S_IRUGO,
+ priv->dbgfs_dir, dev,
+ &stmmac_rings_status_fops);
- if (!stmmac_rings_status || IS_ERR(stmmac_rings_status)) {
+ if (!priv->dbgfs_rings_status || IS_ERR(priv->dbgfs_rings_status)) {
pr_info("ERROR creating stmmac ring debugfs file\n");
- debugfs_remove(stmmac_fs_dir);
+ debugfs_remove_recursive(priv->dbgfs_dir);
return -ENOMEM;
}
/* Entry to report the DMA HW features */
- stmmac_dma_cap = debugfs_create_file("dma_cap", S_IRUGO, stmmac_fs_dir,
- dev, &stmmac_dma_cap_fops);
+ priv->dbgfs_dma_cap = debugfs_create_file("dma_cap", S_IRUGO,
+ priv->dbgfs_dir,
+ dev, &stmmac_dma_cap_fops);
- if (!stmmac_dma_cap || IS_ERR(stmmac_dma_cap)) {
+ if (!priv->dbgfs_dma_cap || IS_ERR(priv->dbgfs_dma_cap)) {
pr_info("ERROR creating stmmac MMC debugfs file\n");
- debugfs_remove(stmmac_rings_status);
- debugfs_remove(stmmac_fs_dir);
+ debugfs_remove_recursive(priv->dbgfs_dir);
return -ENOMEM;
}
@@ -2644,11 +2645,11 @@ static int stmmac_init_fs(struct net_dev
return 0;
}
-static void stmmac_exit_fs(void)
+static void stmmac_exit_fs(struct net_device *dev)
{
- debugfs_remove(stmmac_rings_status);
- debugfs_remove(stmmac_dma_cap);
- debugfs_remove(stmmac_fs_dir);
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ debugfs_remove_recursive(priv->dbgfs_dir);
}
#endif /* CONFIG_STMMAC_DEBUG_FS */
@@ -3032,6 +3033,21 @@ static int __init stmmac_init(void)
ret = stmmac_register_pci();
if (ret)
goto err_pci;
+
+#ifdef CONFIG_STMMAC_DEBUG_FS
+ /* Create debugfs main directory if it doesn't exist yet */
+ if (stmmac_fs_dir == NULL) {
+ stmmac_fs_dir = debugfs_create_dir(STMMAC_RESOURCE_NAME, NULL);
+
+ if (!stmmac_fs_dir || IS_ERR(stmmac_fs_dir)) {
+ pr_err("ERROR %s, debugfs create directory failed\n",
+ STMMAC_RESOURCE_NAME);
+
+ return -ENOMEM;
+ }
+ }
+#endif
+
return 0;
err_pci:
stmmac_unregister_platform();
@@ -3042,6 +3058,9 @@ err:
static void __exit stmmac_exit(void)
{
+#ifdef CONFIG_STMMAC_DEBUG_FS
+ debugfs_remove_recursive(stmmac_fs_dir);
+#endif
stmmac_unregister_platform();
stmmac_unregister_pci();
}

View File

@ -0,0 +1,145 @@
From e81de9d28bd0421c236df322872e64edf4ee1852 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Mon, 11 May 2015 16:32:09 -0700
Subject: [PATCH 7/8] ARM: dts: qcom: add mdio nodes to ap148 & db149
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 40 ++++++++++++++++++++++++++-
arch/arm/boot/dts/qcom-ipq8064-db149.dts | 46 ++++++++++++++++++++++++++++++++
2 files changed, 85 insertions(+), 1 deletion(-)
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -14,8 +14,9 @@
};
};
- alias {
+ aliases {
serial0 = &uart4;
+ mdio-gpio0 = &mdio0;
};
chosen {
@@ -54,6 +55,15 @@
bias-none;
};
};
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
};
gsbi@16300000 {
@@ -163,5 +173,33 @@
pinctrl-0 = <&pcie2_pins>;
pinctrl-names = "default";
};
+
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ device_type = "ethernet-phy";
+ reg = <4>;
+ };
+ };
};
};
--- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
@@ -16,6 +16,7 @@
alias {
serial0 = &uart2;
+ mdio-gpio0 = &mdio0;
};
chosen {
@@ -62,6 +63,15 @@
bias-none;
};
};
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
};
gsbi2: gsbi@12480000 {
@@ -173,5 +183,44 @@
pinctrl-0 = <&pcie3_pins>;
pinctrl-names = "default";
};
+
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ device_type = "ethernet-phy";
+ reg = <4>;
+ };
+
+ phy6: ethernet-phy@6 {
+ device_type = "ethernet-phy";
+ reg = <6>;
+ };
+
+ phy7: ethernet-phy@7 {
+ device_type = "ethernet-phy";
+ reg = <7>;
+ };
+ };
};
};

View File

@ -0,0 +1,210 @@
From cab1f4720e82f2e17eaeed9a9ad9e4f07c742977 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Mon, 11 May 2015 12:29:18 -0700
Subject: [PATCH 8/8] ARM: dts: qcom: add gmac nodes to ipq806x platforms
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 31 ++++++++++++
arch/arm/boot/dts/qcom-ipq8064-db149.dts | 43 ++++++++++++++++
arch/arm/boot/dts/qcom-ipq8064.dtsi | 86 ++++++++++++++++++++++++++++++++
3 files changed, 160 insertions(+)
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -64,6 +64,16 @@
bias-disable;
};
};
+
+ rgmii2_pins: rgmii2_pins {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
+ function = "rgmii2";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
};
gsbi@16300000 {
@@ -201,5 +211,26 @@
reg = <4>;
};
};
+
+ gmac1: ethernet@37200000 {
+ status = "ok";
+ phy-mode = "rgmii";
+ phy-handle = <&phy4>;
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+ };
+
+ gmac2: ethernet@37400000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
};
};
--- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
@@ -72,6 +72,14 @@
bias-disable;
};
};
+
+ rgmii0_pins: rgmii0_pins {
+ mux {
+ pins = "gpio2", "gpio66";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
};
gsbi2: gsbi@12480000 {
@@ -222,5 +230,40 @@
reg = <7>;
};
};
+
+ gmac0: ethernet@37000000 {
+ status = "ok";
+ phy-mode = "rgmii";
+ qcom,id = <0>;
+ phy-handle = <&phy4>;
+
+ pinctrl-0 = <&rgmii0_pins>;
+ pinctrl-names = "default";
+ };
+
+ gmac1: ethernet@37200000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <1>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ gmac2: ethernet@37400000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+ phy-handle = <&phy6>;
+ };
+
+ gmac3: ethernet@37600000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <3>;
+ phy-handle = <&phy7>;
+ };
};
};
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -638,5 +638,91 @@
dr_mode = "host";
};
};
+
+ nss_common: syscon@03000000 {
+ compatible = "syscon";
+ reg = <0x03000000 0x0000FFFF>;
+ };
+
+ qsgmii_csr: syscon@1bb00000 {
+ compatible = "syscon";
+ reg = <0x1bb00000 0x000001FF>;
+ };
+
+ gmac0: ethernet@37000000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac";
+ reg = <0x37000000 0x200000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE1_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE1_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
+ gmac1: ethernet@37200000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac";
+ reg = <0x37200000 0x200000>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE2_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE2_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
+ gmac2: ethernet@37400000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac";
+ reg = <0x37400000 0x200000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE3_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE3_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
+ gmac3: ethernet@37600000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac";
+ reg = <0x37600000 0x200000>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE4_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE4_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
};
};

View File

@ -1,4 +1,4 @@
From a32d6e7c8fca6371a2614924b89981bc912b6378 Mon Sep 17 00:00:00 2001 From f26cc3733bdd697bd81ae505fc133fa7c9b6ea19 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org> From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Tue, 7 Apr 2015 19:58:58 -0700 Date: Tue, 7 Apr 2015 19:58:58 -0700
Subject: [PATCH] ARM: dts: qcom: add initial DB149 device-tree Subject: [PATCH] ARM: dts: qcom: add initial DB149 device-tree
@ -9,8 +9,8 @@ SATA, USB2, USB3 and NOR flash.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
--- ---
arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/qcom-ipq8064-db149.dts | 257 +++++++++++++++++++++++++++++++ arch/arm/boot/dts/qcom-ipq8064-db149.dts | 132 +++++++++++++++++++++++++++++++
2 files changed, 258 insertions(+) 2 files changed, 133 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-ipq8064-db149.dts create mode 100644 arch/arm/boot/dts/qcom-ipq8064-db149.dts
--- a/arch/arm/boot/dts/Makefile --- a/arch/arm/boot/dts/Makefile
@ -25,7 +25,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
qcom-msm8974-sony-xperia-honami.dtb qcom-msm8974-sony-xperia-honami.dtb
--- /dev/null --- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
@@ -0,0 +1,257 @@ @@ -0,0 +1,132 @@
+#include "qcom-ipq8064-v1.0.dtsi" +#include "qcom-ipq8064-v1.0.dtsi"
+ +
+/ { +/ {
@ -50,15 +50,8 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
+ linux,stdout-path = "serial0:115200n8"; + linux,stdout-path = "serial0:115200n8";
+ }; + };
+ +
+ aliases {
+ mdio-gpio0 = &mdio0;
+ };
+
+ soc { + soc {
+ pinmux@800000 { + pinmux@800000 {
+ pinctrl-0 = <&mdio0_pins &rgmii0_pinmux>;
+ pinctrl-names = "default";
+
+ i2c4_pins: i2c4_pinmux { + i2c4_pins: i2c4_pinmux {
+ pins = "gpio12", "gpio13"; + pins = "gpio12", "gpio13";
+ function = "gsbi4"; + function = "gsbi4";
@ -73,23 +66,6 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
+ bias-none; + bias-none;
+ }; + };
+ }; + };
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ rgmii0_pinmux: rgmii0_pinmux {
+ mux {
+ pins = "gpio2", "gpio66";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+ }; + };
+ +
+ gsbi2: gsbi@12480000 { + gsbi2: gsbi@12480000 {
@ -180,106 +156,5 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
+ usb30@1 { + usb30@1 {
+ status = "ok"; + status = "ok";
+ }; + };
+
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
+
+ phy0: ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ device_type = "ethernet-phy";
+ reg = <4>;
+ };
+
+ phy6: ethernet-phy@6 {
+ device_type = "ethernet-phy";
+ reg = <6>;
+ };
+
+ phy7: ethernet-phy@7 {
+ device_type = "ethernet-phy";
+ reg = <7>;
+ };
+ };
+
+ nss-gmac-common {
+ reg = <0x03000000 0x0000FFFF 0x1bb00000 0x0000FFFF 0x00900000 0x00004000>;
+ reg-names = "nss_reg_base" , "qsgmii_reg_base", "clk_ctl_base";
+ };
+
+ gmac0: ethernet@37000000 {
+ status = "ok";
+ phy-mode = "rgmii";
+ qcom,id = <0>;
+ qcom,phy_mdio_addr = <4>;
+ qcom,poll_required = <1>;
+ qcom,rgmii_delay = <1>;
+ qcom,emulation = <0>;
+ qcom,forced_speed = <1000>;
+ qcom,forced_duplex = <1>;
+ qcom,socver = <0>;
+ local-mac-address = [000000000000];
+ mdiobus = <&mdio0>;
+ };
+
+ gmac1: ethernet@37200000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <1>;
+ qcom,phy_mdio_addr = <0>;
+ qcom,poll_required = <0>;
+ qcom,rgmii_delay = <0>;
+ qcom,emulation = <0>;
+ qcom,forced_speed = <1000>;
+ qcom,forced_duplex = <1>;
+ qcom,socver = <0>;
+ local-mac-address = [000000000000];
+ mdiobus = <&mdio0>;
+ };
+
+ gmac2: ethernet@37400000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+ qcom,phy_mdio_addr = <6>;
+ qcom,poll_required = <1>;
+ qcom,rgmii_delay = <0>;
+ qcom,emulation = <0>;
+ qcom,forced_speed = <0>;
+ qcom,forced_duplex = <0>;
+ qcom,socver = <0>;
+ local-mac-address = [000000000000];
+ mdiobus = <&mdio0>;
+ };
+
+ gmac3: ethernet@37600000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <3>;
+ qcom,phy_mdio_addr = <7>;
+ qcom,poll_required = <1>;
+ qcom,rgmii_delay = <0>;
+ qcom,emulation = <0>;
+ qcom,forced_speed = <0>;
+ qcom,forced_duplex = <0>;
+ qcom,socver = <0>;
+ local-mac-address = [000000000000];
+ mdiobus = <&mdio0>;
+ };
+ }; + };
+}; +};

View File

@ -60,7 +60,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
}; };
--- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts --- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
@@ -37,6 +37,30 @@ @@ -30,6 +30,30 @@
bias-disable; bias-disable;
}; };
@ -91,10 +91,11 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
spi_pins: spi_pins { spi_pins: spi_pins {
mux { mux {
pins = "gpio18", "gpio19", "gpio21"; pins = "gpio18", "gpio19", "gpio21";
@@ -153,6 +177,27 @@ @@ -128,5 +152,26 @@
usb30@1 {
status = "ok"; status = "ok";
}; };
+
+ pcie0: pci@1b500000 { + pcie0: pci@1b500000 {
+ status = "ok"; + status = "ok";
+ reset-gpio = <&qcom_pinmux 3 0>; + reset-gpio = <&qcom_pinmux 3 0>;
@ -115,10 +116,8 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
+ pinctrl-0 = <&pcie3_pins>; + pinctrl-0 = <&pcie3_pins>;
+ pinctrl-names = "default"; + pinctrl-names = "default";
+ }; + };
+ };
mdio0: mdio { };
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -3,6 +3,8 @@ @@ -3,6 +3,8 @@
@ -130,7 +129,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
/ { / {
model = "Qualcomm IPQ8064"; model = "Qualcomm IPQ8064";
@@ -291,5 +292,128 @@ @@ -291,5 +293,128 @@
#clock-cells = <1>; #clock-cells = <1>;
#reset-cells = <1>; #reset-cells = <1>;
}; };

View File

@ -1,164 +0,0 @@
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -22,8 +22,15 @@
linux,stdout-path = "serial0:115200n8";
};
+ aliases {
+ mdio-gpio0 = &mdio0;
+ };
+
soc {
pinmux@800000 {
+ pinctrl-0 = <&mdio0_pins &rgmii2_pins>;
+ pinctrl-names = "default";
+
i2c4_pins: i2c4_pinmux {
pins = "gpio12", "gpio13";
function = "gsbi4";
@@ -54,6 +61,25 @@
bias-none;
};
};
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ rgmii2_pins: rgmii2_pins {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
+ function = "rgmii2";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
};
gsbi@16300000 {
@@ -89,6 +115,7 @@
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
+ m25p,fast-read;
partition@0 {
label = "lowlevel_init";
@@ -139,5 +166,66 @@
pinctrl-0 = <&pcie2_pins>;
pinctrl-names = "default";
};
+
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
+
+ phy0: ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ device_type = "ethernet-phy";
+ reg = <4>;
+ };
+ };
+
+ nss-gmac-common {
+ reg = <0x03000000 0x0000FFFF 0x1bb00000 0x0000FFFF 0x00900000 0x00004000>;
+ reg-names = "nss_reg_base" , "qsgmii_reg_base", "clk_ctl_base";
+ };
+
+ gmac1: ethernet@37200000 {
+ status = "ok";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+ qcom,phy_mdio_addr = <4>;
+ qcom,poll_required = <1>;
+ qcom,rgmii_delay = <0>;
+ qcom,emulation = <0>;
+ qcom,forced_speed = <1000>;
+ qcom,forced_duplex = <1>;
+ qcom,socver = <0>;
+ local-mac-address = [000000000000];
+ mdiobus = <&mdio0>;
+ };
+
+ gmac2: ethernet@37400000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+ qcom,phy_mdio_addr = <0>;
+ qcom,poll_required = <0>;
+ qcom,rgmii_delay = <0>;
+ qcom,emulation = <0>;
+ qcom,forced_speed = <1000>;
+ qcom,forced_duplex = <1>;
+ qcom,socver = <0>;
+ local-mac-address = [000000000000];
+ mdiobus = <&mdio0>;
+ };
};
};
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -539,5 +540,42 @@
status = "disabled";
};
+
+ nss-gmac-common {
+ reg = <0x03000000 0x0000FFFF 0x1bb00000 0x0000FFFF 0x00900000 0x00004000>;
+ reg-names = "nss_reg_base" , "qsgmii_reg_base", "clk_ctl_base";
+ };
+
+ gmac0: ethernet@37000000 {
+ device_type = "network";
+ compatible = "qcom,nss-gmac";
+ reg = <0x37000000 0x200000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ gmac1: ethernet@37200000 {
+ device_type = "network";
+ compatible = "qcom,nss-gmac";
+ reg = <0x37200000 0x200000>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ gmac2: ethernet@37400000 {
+ device_type = "network";
+ compatible = "qcom,nss-gmac";
+ reg = <0x37400000 0x200000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ gmac3: ethernet@37600000 {
+ device_type = "network";
+ compatible = "qcom,nss-gmac";
+ reg = <0x37600000 0x200000>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
};
};

View File

@ -0,0 +1,733 @@
From 2fbb18f85826a9ba308fedb2cf90d3a661a39fd7 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Fri, 27 Mar 2015 00:16:14 -0700
Subject: [PATCH] clk: qcom: Add support for NSS/GMAC clocks and resets
Add the NSS/GMAC clocks and the TCM clock and NSS resets.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/qcom/gcc-ipq806x.c | 594 ++++++++++++++++++++++++++-
drivers/clk/qcom/gcc-ipq806x.c.rej | 50 +++
include/dt-bindings/clock/qcom,gcc-ipq806x.h | 2 +
include/dt-bindings/reset/qcom,gcc-ipq806x.h | 43 ++
4 files changed, 688 insertions(+), 1 deletion(-)
create mode 100644 drivers/clk/qcom/gcc-ipq806x.c.rej
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -220,11 +220,46 @@ static struct clk_regmap pll14_vote = {
},
};
+#define NSS_PLL_RATE(f, _l, _m, _n, i) \
+ { \
+ .freq = f, \
+ .l = _l, \
+ .m = _m, \
+ .n = _n, \
+ .ibits = i, \
+ }
+
+static struct pll_freq_tbl pll18_freq_tbl[] = {
+ NSS_PLL_RATE(550000000, 44, 0, 1, 0x01495625),
+ NSS_PLL_RATE(733000000, 58, 16, 25, 0x014b5625),
+};
+
+static struct clk_pll pll18 = {
+ .l_reg = 0x31a4,
+ .m_reg = 0x31a8,
+ .n_reg = 0x31ac,
+ .config_reg = 0x31b4,
+ .mode_reg = 0x31a0,
+ .status_reg = 0x31b8,
+ .status_bit = 16,
+ .post_div_shift = 16,
+ .post_div_width = 1,
+ .freq_tbl = pll18_freq_tbl,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "pll18",
+ .parent_names = (const char *[]){ "pxo" },
+ .num_parents = 1,
+ .ops = &clk_pll_ops,
+ },
+};
+
#define P_PXO 0
#define P_PLL8 1
#define P_PLL3 1
#define P_PLL0 2
#define P_CXO 2
+#define P_PLL14 3
+#define P_PLL18 4
static const u8 gcc_pxo_pll8_map[] = {
[P_PXO] = 0,
@@ -275,6 +310,22 @@ static const char *gcc_pxo_pll8_pll0_map
"pll0_vote",
};
+static const u8 gcc_pxo_pll8_pll14_pll18_pll0_map[] = {
+ [P_PXO] = 0 ,
+ [P_PLL8] = 4,
+ [P_PLL0] = 2,
+ [P_PLL14] = 5,
+ [P_PLL18] = 1,
+};
+
+static const char *gcc_pxo_pll8_pll14_pll18_pll0[] = {
+ "pxo",
+ "pll8_vote",
+ "pll0_vote",
+ "pll14",
+ "pll18",
+};
+
static struct freq_tbl clk_tbl_gsbi_uart[] = {
{ 1843200, P_PLL8, 2, 6, 625 },
{ 3686400, P_PLL8, 2, 12, 625 },
@@ -2250,6 +2301,472 @@ static struct clk_branch usb_fs1_h_clk =
},
};
+static const struct freq_tbl clk_tbl_gmac[] = {
+ { 133000000, P_PLL0, 1, 50, 301 },
+ { 266000000, P_PLL0, 1, 127, 382 },
+ { }
+};
+
+static struct clk_dyn_rcg gmac_core1_src = {
+ .ns_reg[0] = 0x3cac,
+ .ns_reg[1] = 0x3cb0,
+ .md_reg[0] = 0x3ca4,
+ .md_reg[1] = 0x3ca8,
+ .bank_reg = 0x3ca0,
+ .mn[0] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .mn[1] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_gmac,
+ .clkr = {
+ .enable_reg = 0x3ca0,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core1_src",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ },
+ },
+};
+
+static struct clk_branch gmac_core1_clk = {
+ .halt_reg = 0x3c20,
+ .halt_bit = 4,
+ .hwcg_reg = 0x3cb4,
+ .hwcg_bit = 6,
+ .clkr = {
+ .enable_reg = 0x3cb4,
+ .enable_mask = BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core1_clk",
+ .parent_names = (const char *[]){
+ "gmac_core1_src",
+ },
+ .num_parents = 1,
+ .ops = &clk_branch_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static struct clk_dyn_rcg gmac_core2_src = {
+ .ns_reg[0] = 0x3ccc,
+ .ns_reg[1] = 0x3cd0,
+ .md_reg[0] = 0x3cc4,
+ .md_reg[1] = 0x3cc8,
+ .bank_reg = 0x3ca0,
+ .mn[0] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .mn[1] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_gmac,
+ .clkr = {
+ .enable_reg = 0x3cc0,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core2_src",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ },
+ },
+};
+
+static struct clk_branch gmac_core2_clk = {
+ .halt_reg = 0x3c20,
+ .halt_bit = 5,
+ .hwcg_reg = 0x3cd4,
+ .hwcg_bit = 6,
+ .clkr = {
+ .enable_reg = 0x3cd4,
+ .enable_mask = BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core2_clk",
+ .parent_names = (const char *[]){
+ "gmac_core2_src",
+ },
+ .num_parents = 1,
+ .ops = &clk_branch_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static struct clk_dyn_rcg gmac_core3_src = {
+ .ns_reg[0] = 0x3cec,
+ .ns_reg[1] = 0x3cf0,
+ .md_reg[0] = 0x3ce4,
+ .md_reg[1] = 0x3ce8,
+ .bank_reg = 0x3ce0,
+ .mn[0] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .mn[1] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_gmac,
+ .clkr = {
+ .enable_reg = 0x3ce0,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core3_src",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ },
+ },
+};
+
+static struct clk_branch gmac_core3_clk = {
+ .halt_reg = 0x3c20,
+ .halt_bit = 6,
+ .hwcg_reg = 0x3cf4,
+ .hwcg_bit = 6,
+ .clkr = {
+ .enable_reg = 0x3cf4,
+ .enable_mask = BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core3_clk",
+ .parent_names = (const char *[]){
+ "gmac_core3_src",
+ },
+ .num_parents = 1,
+ .ops = &clk_branch_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static struct clk_dyn_rcg gmac_core4_src = {
+ .ns_reg[0] = 0x3d0c,
+ .ns_reg[1] = 0x3d10,
+ .md_reg[0] = 0x3d04,
+ .md_reg[1] = 0x3d08,
+ .bank_reg = 0x3d00,
+ .mn[0] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .mn[1] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_gmac,
+ .clkr = {
+ .enable_reg = 0x3d00,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core4_src",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ },
+ },
+};
+
+static struct clk_branch gmac_core4_clk = {
+ .halt_reg = 0x3c20,
+ .halt_bit = 7,
+ .hwcg_reg = 0x3d14,
+ .hwcg_bit = 6,
+ .clkr = {
+ .enable_reg = 0x3d14,
+ .enable_mask = BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core4_clk",
+ .parent_names = (const char *[]){
+ "gmac_core4_src",
+ },
+ .num_parents = 1,
+ .ops = &clk_branch_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static const struct freq_tbl clk_tbl_nss_tcm[] = {
+ { 266000000, P_PLL0, 3, 0, 0 },
+ { 400000000, P_PLL0, 2, 0, 0 },
+ { }
+};
+
+static struct clk_dyn_rcg nss_tcm_src = {
+ .ns_reg[0] = 0x3dc4,
+ .ns_reg[1] = 0x3dc8,
+ .bank_reg = 0x3dc0,
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 4,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 4,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_nss_tcm,
+ .clkr = {
+ .enable_reg = 0x3dc0,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "nss_tcm_src",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ },
+ },
+};
+
+static struct clk_branch nss_tcm_clk = {
+ .halt_reg = 0x3c20,
+ .halt_bit = 14,
+ .clkr = {
+ .enable_reg = 0x3dd0,
+ .enable_mask = BIT(6) | BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "nss_tcm_clk",
+ .parent_names = (const char *[]){
+ "nss_tcm_src",
+ },
+ .num_parents = 1,
+ .ops = &clk_branch_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static const struct freq_tbl clk_tbl_nss[] = {
+ { 110000000, P_PLL18, 1, 1, 5 },
+ { 275000000, P_PLL18, 2, 0, 0 },
+ { 550000000, P_PLL18, 1, 0, 0 },
+ { 733000000, P_PLL18, 1, 0, 0 },
+ { }
+};
+
+static struct clk_dyn_rcg ubi32_core1_src_clk = {
+ .ns_reg[0] = 0x3d2c,
+ .ns_reg[1] = 0x3d30,
+ .md_reg[0] = 0x3d24,
+ .md_reg[1] = 0x3d28,
+ .bank_reg = 0x3d20,
+ .mn[0] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .mn[1] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_nss,
+ .clkr = {
+ .enable_reg = 0x3d20,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "ubi32_core1_src_clk",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+ },
+ },
+};
+
+static struct clk_dyn_rcg ubi32_core2_src_clk = {
+ .ns_reg[0] = 0x3d4c,
+ .ns_reg[1] = 0x3d50,
+ .md_reg[0] = 0x3d44,
+ .md_reg[1] = 0x3d48,
+ .bank_reg = 0x3d40,
+ .mn[0] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .mn[1] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_nss,
+ .clkr = {
+ .enable_reg = 0x3d40,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "ubi32_core2_src_clk",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+ },
+ },
+};
+
static struct clk_regmap *gcc_ipq806x_clks[] = {
[PLL0] = &pll0.clkr,
[PLL0_VOTE] = &pll0_vote,
@@ -2259,6 +2776,7 @@ static struct clk_regmap *gcc_ipq806x_cl
[PLL8_VOTE] = &pll8_vote,
[PLL14] = &pll14.clkr,
[PLL14_VOTE] = &pll14_vote,
+ [PLL18] = &pll18.clkr,
[GSBI1_UART_SRC] = &gsbi1_uart_src.clkr,
[GSBI1_UART_CLK] = &gsbi1_uart_clk.clkr,
[GSBI2_UART_SRC] = &gsbi2_uart_src.clkr,
@@ -2356,6 +2874,18 @@ static struct clk_regmap *gcc_ipq806x_cl
[PLL9] = &hfpll0.clkr,
[PLL10] = &hfpll1.clkr,
[PLL12] = &hfpll_l2.clkr,
+ [GMAC_CORE1_CLK_SRC] = &gmac_core1_src.clkr,
+ [GMAC_CORE1_CLK] = &gmac_core1_clk.clkr,
+ [GMAC_CORE2_CLK_SRC] = &gmac_core2_src.clkr,
+ [GMAC_CORE2_CLK] = &gmac_core2_clk.clkr,
+ [GMAC_CORE3_CLK_SRC] = &gmac_core3_src.clkr,
+ [GMAC_CORE3_CLK] = &gmac_core3_clk.clkr,
+ [GMAC_CORE4_CLK_SRC] = &gmac_core4_src.clkr,
+ [GMAC_CORE4_CLK] = &gmac_core4_clk.clkr,
+ [UBI32_CORE1_CLK_SRC] = &ubi32_core1_src_clk.clkr,
+ [UBI32_CORE2_CLK_SRC] = &ubi32_core2_src_clk.clkr,
+ [NSSTCM_CLK_SRC] = &nss_tcm_src.clkr,
+ [NSSTCM_CLK] = &nss_tcm_clk.clkr,
};
static const struct qcom_reset_map gcc_ipq806x_resets[] = {
@@ -2474,6 +3004,48 @@ static const struct qcom_reset_map gcc_i
[USB30_1_PHY_RESET] = { 0x3b58, 0 },
[NSSFB0_RESET] = { 0x3b60, 6 },
[NSSFB1_RESET] = { 0x3b60, 7 },
+ [UBI32_CORE1_CLKRST_CLAMP_RESET] = { 0x3d3c, 3},
+ [UBI32_CORE1_CLAMP_RESET] = { 0x3d3c, 2 },
+ [UBI32_CORE1_AHB_RESET] = { 0x3d3c, 1 },
+ [UBI32_CORE1_AXI_RESET] = { 0x3d3c, 0 },
+ [UBI32_CORE2_CLKRST_CLAMP_RESET] = { 0x3d5c, 3 },
+ [UBI32_CORE2_CLAMP_RESET] = { 0x3d5c, 2 },
+ [UBI32_CORE2_AHB_RESET] = { 0x3d5c, 1 },
+ [UBI32_CORE2_AXI_RESET] = { 0x3d5c, 0 },
+ [GMAC_CORE1_RESET] = { 0x3cbc, 0 },
+ [GMAC_CORE2_RESET] = { 0x3cdc, 0 },
+ [GMAC_CORE3_RESET] = { 0x3cfc, 0 },
+ [GMAC_CORE4_RESET] = { 0x3d1c, 0 },
+ [GMAC_AHB_RESET] = { 0x3e24, 0 },
+ [NSS_CH0_RST_RX_CLK_N_RESET] = { 0x3b60, 0 },
+ [NSS_CH0_RST_TX_CLK_N_RESET] = { 0x3b60, 1 },
+ [NSS_CH0_RST_RX_125M_N_RESET] = { 0x3b60, 2 },
+ [NSS_CH0_HW_RST_RX_125M_N_RESET] = { 0x3b60, 3 },
+ [NSS_CH0_RST_TX_125M_N_RESET] = { 0x3b60, 4 },
+ [NSS_CH1_RST_RX_CLK_N_RESET] = { 0x3b60, 5 },
+ [NSS_CH1_RST_TX_CLK_N_RESET] = { 0x3b60, 6 },
+ [NSS_CH1_RST_RX_125M_N_RESET] = { 0x3b60, 7 },
+ [NSS_CH1_HW_RST_RX_125M_N_RESET] = { 0x3b60, 8 },
+ [NSS_CH1_RST_TX_125M_N_RESET] = { 0x3b60, 9 },
+ [NSS_CH2_RST_RX_CLK_N_RESET] = { 0x3b60, 10 },
+ [NSS_CH2_RST_TX_CLK_N_RESET] = { 0x3b60, 11 },
+ [NSS_CH2_RST_RX_125M_N_RESET] = { 0x3b60, 12 },
+ [NSS_CH2_HW_RST_RX_125M_N_RESET] = { 0x3b60, 13 },
+ [NSS_CH2_RST_TX_125M_N_RESET] = { 0x3b60, 14 },
+ [NSS_CH3_RST_RX_CLK_N_RESET] = { 0x3b60, 15 },
+ [NSS_CH3_RST_TX_CLK_N_RESET] = { 0x3b60, 16 },
+ [NSS_CH3_RST_RX_125M_N_RESET] = { 0x3b60, 17 },
+ [NSS_CH3_HW_RST_RX_125M_N_RESET] = { 0x3b60, 18 },
+ [NSS_CH3_RST_TX_125M_N_RESET] = { 0x3b60, 19 },
+ [NSS_RST_RX_250M_125M_N_RESET] = { 0x3b60, 20 },
+ [NSS_RST_TX_250M_125M_N_RESET] = { 0x3b60, 21 },
+ [NSS_QSGMII_TXPI_RST_N_RESET] = { 0x3b60, 22 },
+ [NSS_QSGMII_CDR_RST_N_RESET] = { 0x3b60, 23 },
+ [NSS_SGMII2_CDR_RST_N_RESET] = { 0x3b60, 24 },
+ [NSS_SGMII3_CDR_RST_N_RESET] = { 0x3b60, 25 },
+ [NSS_CAL_PRBS_RST_N_RESET] = { 0x3b60, 26 },
+ [NSS_LCKDT_RST_N_RESET] = { 0x3b60, 27 },
+ [NSS_SRDS_N_RESET] = { 0x3b60, 28 },
};
static const struct regmap_config gcc_ipq806x_regmap_config = {
@@ -2502,6 +3074,8 @@ static int gcc_ipq806x_probe(struct plat
{
struct clk *clk;
struct device *dev = &pdev->dev;
+ struct regmap *regmap;
+ int ret;
/* Temporary until RPM clocks supported */
clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 25000000);
@@ -2512,7 +3086,25 @@ static int gcc_ipq806x_probe(struct plat
if (IS_ERR(clk))
return PTR_ERR(clk);
- return qcom_cc_probe(pdev, &gcc_ipq806x_desc);
+ ret = qcom_cc_probe(pdev, &gcc_ipq806x_desc);
+ if (ret)
+ return ret;
+
+ regmap = dev_get_regmap(dev, NULL);
+ if (!regmap)
+ return -ENODEV;
+
+ /* Setup PLL18 static bits */
+ regmap_update_bits(regmap, 0x31a4, 0xffffffc0, 0x40000400);
+ regmap_write(regmap, 0x31b0, 0x3080);
+
+ /* Set GMAC footswitch sleep/wakeup values */
+ regmap_write(regmap, 0x3cb8, 8);
+ regmap_write(regmap, 0x3cd8, 8);
+ regmap_write(regmap, 0x3cf8, 8);
+ regmap_write(regmap, 0x3d18, 8);
+
+ return 0;
}
static int gcc_ipq806x_remove(struct platform_device *pdev)
--- a/include/dt-bindings/clock/qcom,gcc-ipq806x.h
+++ b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
@@ -288,5 +288,7 @@
#define UBI32_CORE2_CLK_SRC 278
#define UBI32_CORE1_CLK 279
#define UBI32_CORE2_CLK 280
+#define NSSTCM_CLK_SRC 281
+#define NSSTCM_CLK 282
#endif
--- a/include/dt-bindings/reset/qcom,gcc-ipq806x.h
+++ b/include/dt-bindings/reset/qcom,gcc-ipq806x.h
@@ -129,4 +129,47 @@
#define USB30_1_PHY_RESET 112
#define NSSFB0_RESET 113
#define NSSFB1_RESET 114
+#define UBI32_CORE1_CLKRST_CLAMP_RESET 115
+#define UBI32_CORE1_CLAMP_RESET 116
+#define UBI32_CORE1_AHB_RESET 117
+#define UBI32_CORE1_AXI_RESET 118
+#define UBI32_CORE2_CLKRST_CLAMP_RESET 119
+#define UBI32_CORE2_CLAMP_RESET 120
+#define UBI32_CORE2_AHB_RESET 121
+#define UBI32_CORE2_AXI_RESET 122
+#define GMAC_CORE1_RESET 123
+#define GMAC_CORE2_RESET 124
+#define GMAC_CORE3_RESET 125
+#define GMAC_CORE4_RESET 126
+#define GMAC_AHB_RESET 127
+#define NSS_CH0_RST_RX_CLK_N_RESET 128
+#define NSS_CH0_RST_TX_CLK_N_RESET 129
+#define NSS_CH0_RST_RX_125M_N_RESET 130
+#define NSS_CH0_HW_RST_RX_125M_N_RESET 131
+#define NSS_CH0_RST_TX_125M_N_RESET 132
+#define NSS_CH1_RST_RX_CLK_N_RESET 133
+#define NSS_CH1_RST_TX_CLK_N_RESET 134
+#define NSS_CH1_RST_RX_125M_N_RESET 135
+#define NSS_CH1_HW_RST_RX_125M_N_RESET 136
+#define NSS_CH1_RST_TX_125M_N_RESET 137
+#define NSS_CH2_RST_RX_CLK_N_RESET 138
+#define NSS_CH2_RST_TX_CLK_N_RESET 139
+#define NSS_CH2_RST_RX_125M_N_RESET 140
+#define NSS_CH2_HW_RST_RX_125M_N_RESET 141
+#define NSS_CH2_RST_TX_125M_N_RESET 142
+#define NSS_CH3_RST_RX_CLK_N_RESET 143
+#define NSS_CH3_RST_TX_CLK_N_RESET 144
+#define NSS_CH3_RST_RX_125M_N_RESET 145
+#define NSS_CH3_HW_RST_RX_125M_N_RESET 146
+#define NSS_CH3_RST_TX_125M_N_RESET 147
+#define NSS_RST_RX_250M_125M_N_RESET 148
+#define NSS_RST_TX_250M_125M_N_RESET 149
+#define NSS_QSGMII_TXPI_RST_N_RESET 150
+#define NSS_QSGMII_CDR_RST_N_RESET 151
+#define NSS_SGMII2_CDR_RST_N_RESET 152
+#define NSS_SGMII3_CDR_RST_N_RESET 153
+#define NSS_CAL_PRBS_RST_N_RESET 154
+#define NSS_LCKDT_RST_N_RESET 155
+#define NSS_SRDS_N_RESET 156
+
#endif

View File

@ -0,0 +1,105 @@
From 4f09499bc1d9bb095caccbcd73ff951ee631e521 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Fri, 8 May 2015 15:42:40 -0700
Subject: [PATCH 1/8] stmmac: add phy-handle support to the platform layer
On stmmac driver, PHY specification in device-tree was done using the
non-standard property "snps,phy-addr". Specifying a PHY on a different
MDIO bus that the one within the stmmac controller doesn't seem to be
possible when device-tree is used.
This change adds support for the phy-handle property, as specified in
Documentation/devicetree/bindings/net/ethernet.txt.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 28 ++++++++++++++--------
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 6 ++++-
include/linux/stmmac.h | 1 +
3 files changed, 24 insertions(+), 11 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -52,6 +52,7 @@
#include "stmmac_ptp.h"
#include "stmmac.h"
#include <linux/reset.h>
+#include <linux/of_mdio.h>
#define STMMAC_ALIGN(x) L1_CACHE_ALIGN(x)
@@ -816,18 +817,25 @@ static int stmmac_init_phy(struct net_de
priv->speed = 0;
priv->oldduplex = -1;
- if (priv->plat->phy_bus_name)
- snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x",
- priv->plat->phy_bus_name, priv->plat->bus_id);
- else
- snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
- priv->plat->bus_id);
-
- snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
- priv->plat->phy_addr);
- pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id_fmt);
+ if (priv->plat->phy_node) {
+ phydev = of_phy_connect(dev, priv->plat->phy_node,
+ &stmmac_adjust_link, 0, interface);
+ } else {
+ if (priv->plat->phy_bus_name)
+ snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x",
+ priv->plat->phy_bus_name, priv->plat->bus_id);
+ else
+ snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
+ priv->plat->bus_id);
+
+ snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
+ priv->plat->phy_addr);
+ pr_debug("stmmac_init_phy: trying to attach to %s\n",
+ phy_id_fmt);
- phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link, interface);
+ phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link,
+ interface);
+ }
if (IS_ERR(phydev)) {
pr_err("%s: Could not attach to PHY\n", dev->name);
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -27,6 +27,7 @@
#include <linux/of.h>
#include <linux/of_net.h>
#include <linux/of_device.h>
+#include <linux/of_mdio.h>
#include "stmmac.h"
#include "stmmac_platform.h"
@@ -167,13 +168,16 @@ static int stmmac_probe_config_dt(struct
/* Default to phy auto-detection */
plat->phy_addr = -1;
+ /* If we find a phy-handle property, use it as the PHY */
+ plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
+
/* "snps,phy-addr" is not a standard property. Mark it as deprecated
* and warn of its use. Remove this when phy node support is added.
*/
if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
- if (plat->phy_bus_name)
+ if (plat->phy_node || plat->phy_bus_name)
plat->mdio_bus_data = NULL;
else
plat->mdio_bus_data =
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -99,6 +99,7 @@ struct plat_stmmacenet_data {
int phy_addr;
int interface;
struct stmmac_mdio_bus_data *mdio_bus_data;
+ struct device_node *phy_node;
struct stmmac_dma_cfg *dma_cfg;
int clk_csr;
int has_gmac;

View File

@ -0,0 +1,65 @@
From 0149d275415cd1b2382ce94e5eb32641590097d0 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Fri, 8 May 2015 15:57:12 -0700
Subject: [PATCH 2/8] stmmac: move error path at the end of
stmmac_probe_config_dt()
We will want to do additional clean-up on certain errors. Therefore,
this change moves the error path at the end of the function for better
code readability.
This patch doesn't change anything functionally.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -129,13 +129,18 @@ static int stmmac_probe_config_dt(struct
struct device_node *np = pdev->dev.of_node;
struct stmmac_dma_cfg *dma_cfg;
const struct of_device_id *device;
+ int ret;
- if (!np)
- return -ENODEV;
+ if (!np) {
+ ret = -ENODEV;
+ goto err;
+ }
device = of_match_device(stmmac_dt_ids, &pdev->dev);
- if (!device)
- return -ENODEV;
+ if (!device) {
+ ret = -ENODEV;
+ goto err;
+ }
if (device->data) {
const struct stmmac_of_data *data = device->data;
@@ -231,8 +236,10 @@ static int stmmac_probe_config_dt(struct
if (of_find_property(np, "snps,pbl", NULL)) {
dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg),
GFP_KERNEL);
- if (!dma_cfg)
- return -ENOMEM;
+ if (!dma_cfg) {
+ ret = -ENOMEM;
+ goto err;
+ }
plat->dma_cfg = dma_cfg;
of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
dma_cfg->fixed_burst =
@@ -250,6 +257,9 @@ static int stmmac_probe_config_dt(struct
}
return 0;
+
+err:
+ return ret;
}
#else
static int stmmac_probe_config_dt(struct platform_device *pdev,

View File

@ -0,0 +1,64 @@
From 3a95f75867be562cb919ff23a738f70357188fbd Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Fri, 8 May 2015 16:02:03 -0700
Subject: [PATCH 3/8] stmmac: add fixed-link device-tree support
In case DT is used, this change adds the ability to the stmmac driver to
detect a fixed-link PHY, instanciate it, and use it during
phy_connect().
Fixed link PHYs DT usage is described in:
Documentation/devicetree/bindings/net/fixed-link.txt
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +-
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 12 +++++++++++-
2 files changed, 12 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -856,7 +856,7 @@ static int stmmac_init_phy(struct net_de
* device as well.
* Note: phydev->phy_id is the result of reading the UID PHY registers.
*/
- if (phydev->phy_id == 0) {
+ if (!priv->plat->phy_node && phydev->phy_id == 0) {
phy_disconnect(phydev);
return -ENODEV;
}
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -176,6 +176,14 @@ static int stmmac_probe_config_dt(struct
/* If we find a phy-handle property, use it as the PHY */
plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
+ /* If phy-handle is not specified, check if we have a fixed-phy */
+ if (!plat->phy_node && of_phy_is_fixed_link(np)) {
+ if ((of_phy_register_fixed_link(np) < 0))
+ return -ENODEV;
+
+ plat->phy_node = of_node_get(np);
+ }
+
/* "snps,phy-addr" is not a standard property. Mark it as deprecated
* and warn of its use. Remove this when phy node support is added.
*/
@@ -238,7 +246,7 @@ static int stmmac_probe_config_dt(struct
GFP_KERNEL);
if (!dma_cfg) {
ret = -ENOMEM;
- goto err;
+ goto err2;
}
plat->dma_cfg = dma_cfg;
of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
@@ -258,6 +266,8 @@ static int stmmac_probe_config_dt(struct
return 0;
+err2:
+ of_node_put(np);
err:
return ret;
}

View File

@ -0,0 +1,407 @@
From 69fb970ad3fe05af7cb99ea78230c69c7ca0d03b Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Fri, 8 May 2015 16:10:22 -0700
Subject: [PATCH 4/8] stmmac: add ipq806x glue layer
The ethernet controller available in IPQ806x is a Synopsys DesignWare
Gigabit MAC IP core, already supported by the stmmac driver.
This glue layer implements some platform specific settings required to
get the controller working on an IPQ806x based platform.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
drivers/net/ethernet/stmicro/stmmac/Kconfig | 1 +
drivers/net/ethernet/stmicro/stmmac/Makefile | 2 +-
drivers/net/ethernet/stmicro/stmmac/dwmac-ipq.c | 324 +++++++++++++++++++++
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 +
.../net/ethernet/stmicro/stmmac/stmmac_platform.h | 1 +
5 files changed, 328 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-ipq.c
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -16,6 +16,7 @@ if STMMAC_ETH
config STMMAC_PLATFORM
tristate "STMMAC Platform bus support"
depends on STMMAC_ETH
+ select MFD_SYSCON
default y
---help---
This selects the platform specific bus support for the stmmac driver.
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -6,7 +6,7 @@ stmmac-objs:= stmmac_main.o stmmac_ethto
obj-$(CONFIG_STMMAC_PLATFORM) += stmmac-platform.o
stmmac-platform-objs:= stmmac_platform.o dwmac-meson.o dwmac-sunxi.o \
- dwmac-sti.o dwmac-socfpga.o dwmac-rk.o
+ dwmac-sti.o dwmac-socfpga.o dwmac-rk.o dwmac-ipq806x.o
obj-$(CONFIG_STMMAC_PCI) += stmmac-pci.o
stmmac-pci-objs:= stmmac_pci.o
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -42,6 +42,7 @@ static const struct of_device_id stmmac_
{ .compatible = "st,stid127-dwmac", .data = &stid127_dwmac_data},
{ .compatible = "st,stih407-dwmac", .data = &stih4xx_dwmac_data},
{ .compatible = "altr,socfpga-stmmac", .data = &socfpga_gmac_data },
+ { .compatible = "qcom,ipq806x-gmac", .data = &ipq806x_gmac_data },
{ .compatible = "st,spear600-gmac"},
{ .compatible = "snps,dwmac-3.610"},
{ .compatible = "snps,dwmac-3.70a"},
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h
@@ -25,5 +25,6 @@ extern const struct stmmac_of_data stih4
extern const struct stmmac_of_data stid127_dwmac_data;
extern const struct stmmac_of_data socfpga_gmac_data;
extern const struct stmmac_of_data rk3288_gmac_data;
+extern const struct stmmac_of_data ipq806x_gmac_data;
#endif /* __STMMAC_PLATFORM_H__ */
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
@@ -0,0 +1,343 @@
+/*
+ * Qualcomm Atheros IPQ806x GMAC glue layer
+ *
+ * Copyright (C) 2015 The Linux Foundation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/phy.h>
+#include <linux/regmap.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
+#include <linux/of_net.h>
+#include <linux/mfd/syscon.h>
+#include <linux/stmmac.h>
+#include <linux/of_mdio.h>
+
+#include "stmmac_platform.h"
+
+#define NSS_COMMON_CLK_GATE 0x8
+#define NSS_COMMON_CLK_GATE_PTP_EN(x) BIT(0x10 + x)
+#define NSS_COMMON_CLK_GATE_RGMII_RX_EN(x) BIT(0x9 + (x * 2))
+#define NSS_COMMON_CLK_GATE_RGMII_TX_EN(x) BIT(0x8 + (x * 2))
+#define NSS_COMMON_CLK_GATE_GMII_RX_EN(x) BIT(0x4 + x)
+#define NSS_COMMON_CLK_GATE_GMII_TX_EN(x) BIT(0x0 + x)
+
+#define NSS_COMMON_CLK_DIV0 0xC
+#define NSS_COMMON_CLK_DIV_OFFSET(x) (x * 8)
+#define NSS_COMMON_CLK_DIV_MASK 0x7f
+
+#define NSS_COMMON_CLK_SRC_CTRL 0x14
+#define NSS_COMMON_CLK_SRC_CTRL_OFFSET(x) (1 << x)
+/* Mode is coded on 1 bit but is different depending on the MAC ID:
+ * MAC0: QSGMII=0 RGMII=1
+ * MAC1: QSGMII=0 SGMII=0 RGMII=1
+ * MAC2 & MAC3: QSGMII=0 SGMII=1
+ */
+#define NSS_COMMON_CLK_SRC_CTRL_RGMII(x) 1
+#define NSS_COMMON_CLK_SRC_CTRL_SGMII(x) ((x >= 2) ? 1 : 0)
+
+#define NSS_COMMON_MACSEC_CTL 0x28
+#define NSS_COMMON_MACSEC_CTL_EXT_BYPASS_EN(x) (1 << x)
+
+#define NSS_COMMON_GMAC_CTL(x) (0x30 + (x * 4))
+#define NSS_COMMON_GMAC_CTL_CSYS_REQ BIT(19)
+#define NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL BIT(16)
+#define NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET 8
+#define NSS_COMMON_GMAC_CTL_IFG_OFFSET 0
+#define NSS_COMMON_GMAC_CTL_IFG_MASK 0x3f
+
+#define NSS_COMMON_CLK_DIV_RGMII_1000 1
+#define NSS_COMMON_CLK_DIV_RGMII_100 9
+#define NSS_COMMON_CLK_DIV_RGMII_10 99
+#define NSS_COMMON_CLK_DIV_SGMII_1000 0
+#define NSS_COMMON_CLK_DIV_SGMII_100 4
+#define NSS_COMMON_CLK_DIV_SGMII_10 49
+
+#define QSGMII_PCS_MODE_CTL 0x68
+#define QSGMII_PCS_MODE_CTL_AUTONEG_EN(x) BIT((x * 8) + 7)
+
+#define QSGMII_PCS_CAL_LCKDT_CTL 0x120
+#define QSGMII_PCS_CAL_LCKDT_CTL_RST BIT(19)
+
+/* Only GMAC1/2/3 support SGMII and their CTL register are not contiguous */
+#define QSGMII_PHY_SGMII_CTL(x) ((x == 1) ? 0x134 : \
+ (0x13c + (4 * (x - 2))))
+#define QSGMII_PHY_CDR_EN BIT(0)
+#define QSGMII_PHY_RX_FRONT_EN BIT(1)
+#define QSGMII_PHY_RX_SIGNAL_DETECT_EN BIT(2)
+#define QSGMII_PHY_TX_DRIVER_EN BIT(3)
+#define QSGMII_PHY_QSGMII_EN BIT(7)
+#define QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET 12
+#define QSGMII_PHY_PHASE_LOOP_GAIN_MASK 0x7
+#define QSGMII_PHY_RX_DC_BIAS_OFFSET 18
+#define QSGMII_PHY_RX_DC_BIAS_MASK 0x3
+#define QSGMII_PHY_RX_INPUT_EQU_OFFSET 20
+#define QSGMII_PHY_RX_INPUT_EQU_MASK 0x3
+#define QSGMII_PHY_CDR_PI_SLEW_OFFSET 22
+#define QSGMII_PHY_CDR_PI_SLEW_MASK 0x3
+#define QSGMII_PHY_TX_DRV_AMP_OFFSET 28
+#define QSGMII_PHY_TX_DRV_AMP_MASK 0xf
+
+struct ipq806x_gmac {
+ struct platform_device *pdev;
+ struct regmap *nss_common;
+ struct regmap *qsgmii_csr;
+ uint32_t id;
+ struct clk *core_clk;
+ phy_interface_t phy_mode;
+};
+
+static int get_clk_div_sgmii(struct ipq806x_gmac *gmac, unsigned int speed)
+{
+ struct device *dev = &gmac->pdev->dev;
+ int div;
+
+ switch (speed) {
+ case SPEED_1000:
+ div = NSS_COMMON_CLK_DIV_SGMII_1000;
+ break;
+
+ case SPEED_100:
+ div = NSS_COMMON_CLK_DIV_SGMII_100;
+ break;
+
+ case SPEED_10:
+ div = NSS_COMMON_CLK_DIV_SGMII_10;
+ break;
+
+ default:
+ dev_err(dev, "Speed %dMbps not supported in SGMII\n", speed);
+ return -EINVAL;
+ }
+
+ return div;
+}
+
+static int get_clk_div_rgmii(struct ipq806x_gmac *gmac, unsigned int speed)
+{
+ struct device *dev = &gmac->pdev->dev;
+ int div;
+
+ switch (speed) {
+ case SPEED_1000:
+ div = NSS_COMMON_CLK_DIV_RGMII_1000;
+ break;
+
+ case SPEED_100:
+ div = NSS_COMMON_CLK_DIV_RGMII_100;
+ break;
+
+ case SPEED_10:
+ div = NSS_COMMON_CLK_DIV_RGMII_10;
+ break;
+
+ default:
+ dev_err(dev, "Speed %dMbps not supported in RGMII\n", speed);
+ return -EINVAL;
+ }
+
+ return div;
+}
+
+static int ipq806x_gmac_set_speed(struct ipq806x_gmac *gmac, unsigned int speed)
+{
+ uint32_t clk_bits, val;
+ int div;
+
+ switch (gmac->phy_mode) {
+ case PHY_INTERFACE_MODE_RGMII:
+ div = get_clk_div_rgmii(gmac, speed);
+ clk_bits = NSS_COMMON_CLK_GATE_RGMII_RX_EN(gmac->id) |
+ NSS_COMMON_CLK_GATE_RGMII_TX_EN(gmac->id);
+ break;
+
+ case PHY_INTERFACE_MODE_SGMII:
+ div = get_clk_div_sgmii(gmac, speed);
+ clk_bits = NSS_COMMON_CLK_GATE_GMII_RX_EN(gmac->id) |
+ NSS_COMMON_CLK_GATE_GMII_TX_EN(gmac->id);
+ break;
+
+ default:
+ dev_err(&gmac->pdev->dev, "Unsupported PHY mode: \"%s\"\n",
+ phy_modes(gmac->phy_mode));
+ return -EINVAL;
+ }
+
+ /* Disable the clocks */
+ regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
+ val &= ~clk_bits;
+ regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
+
+ /* Set the divider */
+ regmap_read(gmac->nss_common, NSS_COMMON_CLK_DIV0, &val);
+ val &= ~(NSS_COMMON_CLK_DIV_MASK
+ << NSS_COMMON_CLK_DIV_OFFSET(gmac->id));
+ val |= div << NSS_COMMON_CLK_DIV_OFFSET(gmac->id);
+ regmap_write(gmac->nss_common, NSS_COMMON_CLK_DIV0, val);
+
+ /* Enable the clock back */
+ regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
+ val |= clk_bits;
+ regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
+
+ return 0;
+}
+
+static void *ipq806x_gmac_of_parse(struct ipq806x_gmac *gmac)
+{
+ struct device *dev = &gmac->pdev->dev;
+
+ gmac->phy_mode = of_get_phy_mode(dev->of_node);
+ if (gmac->phy_mode < 0) {
+ dev_err(dev, "missing phy mode property\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (of_property_read_u32(dev->of_node, "qcom,id", &gmac->id) < 0) {
+ dev_err(dev, "missing qcom id property\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ /* The GMACs are called 1 to 4 in the documentation, but to simplify the
+ * code and keep it consistent with the Linux convention, we'll number
+ * them from 0 to 3 here.
+ */
+ if (gmac->id < 0 || gmac->id > 3) {
+ dev_err(dev, "invalid gmac id\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ gmac->core_clk = devm_clk_get(dev, "stmmaceth");
+ if (IS_ERR(gmac->core_clk)) {
+ dev_err(dev, "missing stmmaceth clk property\n");
+ return gmac->core_clk;
+ }
+ clk_set_rate(gmac->core_clk, 266000000);
+
+ /* Setup the register map for the nss common registers */
+ gmac->nss_common = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "qcom,nss-common");
+ if (IS_ERR(gmac->nss_common)) {
+ dev_err(dev, "missing nss-common node\n");
+ return gmac->nss_common;
+ }
+
+ /* Setup the register map for the qsgmii csr registers */
+ gmac->qsgmii_csr = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "qcom,qsgmii-csr");
+ if (IS_ERR(gmac->qsgmii_csr)) {
+ dev_err(dev, "missing qsgmii-csr node\n");
+ return gmac->qsgmii_csr;
+ }
+
+ return NULL;
+}
+
+static void *ipq806x_gmac_setup(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ipq806x_gmac *gmac;
+ int val;
+ void *err;
+
+ gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL);
+ if (!gmac)
+ return ERR_PTR(-ENOMEM);
+
+ gmac->pdev = pdev;
+
+ err = ipq806x_gmac_of_parse(gmac);
+ if (err) {
+ dev_err(dev, "device tree parsing error\n");
+ return err;
+ }
+
+ regmap_write(gmac->qsgmii_csr, QSGMII_PCS_CAL_LCKDT_CTL,
+ QSGMII_PCS_CAL_LCKDT_CTL_RST);
+
+ /* Inter frame gap is set to 12 */
+ val = 12 << NSS_COMMON_GMAC_CTL_IFG_OFFSET |
+ 12 << NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET;
+ /* We also initiate an AXI low power exit request */
+ val |= NSS_COMMON_GMAC_CTL_CSYS_REQ;
+ switch (gmac->phy_mode) {
+ case PHY_INTERFACE_MODE_RGMII:
+ val |= NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL;
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ val &= ~NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL;
+ break;
+ default:
+ dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
+ phy_modes(gmac->phy_mode));
+ return NULL;
+ }
+ regmap_write(gmac->nss_common, NSS_COMMON_GMAC_CTL(gmac->id), val);
+
+ /* Configure the clock src according to the mode */
+ regmap_read(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, &val);
+ val &= ~NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
+ switch (gmac->phy_mode) {
+ case PHY_INTERFACE_MODE_RGMII:
+ val |= NSS_COMMON_CLK_SRC_CTRL_RGMII(gmac->id) <<
+ NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ val |= NSS_COMMON_CLK_SRC_CTRL_SGMII(gmac->id) <<
+ NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
+ break;
+ default:
+ dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
+ phy_modes(gmac->phy_mode));
+ return NULL;
+ }
+ regmap_write(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, val);
+
+ /* Enable PTP clock */
+ regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
+ val |= NSS_COMMON_CLK_GATE_PTP_EN(gmac->id);
+ regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
+
+ if (gmac->phy_mode == PHY_INTERFACE_MODE_SGMII) {
+ regmap_write(gmac->qsgmii_csr, QSGMII_PHY_SGMII_CTL(gmac->id),
+ QSGMII_PHY_CDR_EN |
+ QSGMII_PHY_RX_FRONT_EN |
+ QSGMII_PHY_RX_SIGNAL_DETECT_EN |
+ QSGMII_PHY_TX_DRIVER_EN |
+ QSGMII_PHY_QSGMII_EN |
+ 0x4 << QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET |
+ 0x3 << QSGMII_PHY_RX_DC_BIAS_OFFSET |
+ 0x1 << QSGMII_PHY_RX_INPUT_EQU_OFFSET |
+ 0x2 << QSGMII_PHY_CDR_PI_SLEW_OFFSET |
+ 0xC << QSGMII_PHY_TX_DRV_AMP_OFFSET);
+ }
+
+ return gmac;
+}
+
+static void ipq806x_gmac_fix_mac_speed(void *priv, unsigned int speed)
+{
+ struct ipq806x_gmac *gmac = priv;
+
+ ipq806x_gmac_set_speed(gmac, speed);
+}
+
+const struct stmmac_of_data ipq806x_gmac_data = {
+ .has_gmac = 1,
+ .setup = ipq806x_gmac_setup,
+ .fix_mac_speed = ipq806x_gmac_fix_mac_speed,
+};

View File

@ -0,0 +1,52 @@
From 0f9605d9409b77a89daef91cc68239fc2ff50457 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Fri, 8 May 2015 16:51:25 -0700
Subject: [PATCH 5/8] net: stmmac: ipq806x: document device tree bindings
Add the device tree bindings documentation for the QCA IPQ806x
variant of the Synopsys DesignWare MAC.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
.../devicetree/bindings/net/ipq806x-dwmac.txt | 35 ++++++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/ipq806x-dwmac.txt
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ipq806x-dwmac.txt
@@ -0,0 +1,35 @@
+* IPQ806x DWMAC Ethernet controller
+
+The device inherits all the properties of the dwmac/stmmac devices
+described in the file net/stmmac.txt with the following changes.
+
+Required properties:
+
+- compatible: should be "qcom,ipq806x-gmac" along with "snps,dwmac"
+ and any applicable more detailed version number
+ described in net/stmmac.txt
+
+- qcom,nss-common: should contain a phandle to a syscon device mapping the
+ nss-common registers.
+
+- qcom,qsgmii-csr: should contain a phandle to a syscon device mapping the
+ qsgmii-csr registers.
+
+Example:
+
+ gmac: ethernet@37000000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac";
+ reg = <0x37000000 0x200000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE1_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE1_RESET>;
+ reset-names = "stmmaceth";
+ };

View File

@ -0,0 +1,175 @@
From df944689d491e6af533173bf2ef448c3dd334f15 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Mon, 11 May 2015 15:15:25 -0700
Subject: [PATCH 6/8] net: stmmac: create one debugfs dir per net-device
stmmac DebugFS entries are currently global to the driver. As a result,
having more than one stmmac device in the system creates the following
error:
* ERROR stmmaceth, debugfs create directory failed
* stmmac_hw_setup: failed debugFS registration
This also results in being able to access the debugfs information for
the first registered device only.
This patch changes the debugfs structure to have one sub-directory per
net-device. Files under "/sys/kernel/debug/stmmaceth" will now show-up
under /sys/kernel/debug/stmmaceth/ethN/.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 6 ++
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 76 ++++++++++++++++-------
2 files changed, 59 insertions(+), 23 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -116,6 +116,12 @@ struct stmmac_priv {
int use_riwt;
int irq_wake;
spinlock_t ptp_lock;
+
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *dbgfs_dir;
+ struct dentry *dbgfs_rings_status;
+ struct dentry *dbgfs_dma_cap;
+#endif
};
int stmmac_mdio_unregister(struct net_device *ndev);
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -119,7 +119,7 @@ static irqreturn_t stmmac_interrupt(int
#ifdef CONFIG_DEBUG_FS
static int stmmac_init_fs(struct net_device *dev);
-static void stmmac_exit_fs(void);
+static void stmmac_exit_fs(struct net_device *dev);
#endif
#define STMMAC_COAL_TIMER(x) (jiffies + usecs_to_jiffies(x))
@@ -1918,7 +1918,7 @@ static int stmmac_release(struct net_dev
netif_carrier_off(dev);
#ifdef CONFIG_DEBUG_FS
- stmmac_exit_fs();
+ stmmac_exit_fs(dev);
#endif
stmmac_release_ptp(priv);
@@ -2510,8 +2510,6 @@ static int stmmac_ioctl(struct net_devic
#ifdef CONFIG_DEBUG_FS
static struct dentry *stmmac_fs_dir;
-static struct dentry *stmmac_rings_status;
-static struct dentry *stmmac_dma_cap;
static void sysfs_display_ring(void *head, int size, int extend_desc,
struct seq_file *seq)
@@ -2650,36 +2648,39 @@ static const struct file_operations stmm
static int stmmac_init_fs(struct net_device *dev)
{
- /* Create debugfs entries */
- stmmac_fs_dir = debugfs_create_dir(STMMAC_RESOURCE_NAME, NULL);
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ /* Create per netdev entries */
+ priv->dbgfs_dir = debugfs_create_dir(dev->name, stmmac_fs_dir);
- if (!stmmac_fs_dir || IS_ERR(stmmac_fs_dir)) {
- pr_err("ERROR %s, debugfs create directory failed\n",
- STMMAC_RESOURCE_NAME);
+ if (!priv->dbgfs_dir || IS_ERR(priv->dbgfs_dir)) {
+ pr_err("ERROR %s/%s, debugfs create directory failed\n",
+ STMMAC_RESOURCE_NAME, dev->name);
return -ENOMEM;
}
/* Entry to report DMA RX/TX rings */
- stmmac_rings_status = debugfs_create_file("descriptors_status",
- S_IRUGO, stmmac_fs_dir, dev,
- &stmmac_rings_status_fops);
+ priv->dbgfs_rings_status =
+ debugfs_create_file("descriptors_status", S_IRUGO,
+ priv->dbgfs_dir, dev,
+ &stmmac_rings_status_fops);
- if (!stmmac_rings_status || IS_ERR(stmmac_rings_status)) {
+ if (!priv->dbgfs_rings_status || IS_ERR(priv->dbgfs_rings_status)) {
pr_info("ERROR creating stmmac ring debugfs file\n");
- debugfs_remove(stmmac_fs_dir);
+ debugfs_remove_recursive(priv->dbgfs_dir);
return -ENOMEM;
}
/* Entry to report the DMA HW features */
- stmmac_dma_cap = debugfs_create_file("dma_cap", S_IRUGO, stmmac_fs_dir,
- dev, &stmmac_dma_cap_fops);
+ priv->dbgfs_dma_cap = debugfs_create_file("dma_cap", S_IRUGO,
+ priv->dbgfs_dir,
+ dev, &stmmac_dma_cap_fops);
- if (!stmmac_dma_cap || IS_ERR(stmmac_dma_cap)) {
+ if (!priv->dbgfs_dma_cap || IS_ERR(priv->dbgfs_dma_cap)) {
pr_info("ERROR creating stmmac MMC debugfs file\n");
- debugfs_remove(stmmac_rings_status);
- debugfs_remove(stmmac_fs_dir);
+ debugfs_remove_recursive(priv->dbgfs_dir);
return -ENOMEM;
}
@@ -2687,11 +2688,11 @@ static int stmmac_init_fs(struct net_dev
return 0;
}
-static void stmmac_exit_fs(void)
+static void stmmac_exit_fs(struct net_device *dev)
{
- debugfs_remove(stmmac_rings_status);
- debugfs_remove(stmmac_dma_cap);
- debugfs_remove(stmmac_fs_dir);
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ debugfs_remove_recursive(priv->dbgfs_dir);
}
#endif /* CONFIG_DEBUG_FS */
@@ -3136,6 +3137,35 @@ err:
__setup("stmmaceth=", stmmac_cmdline_opt);
#endif /* MODULE */
+static int __init stmmac_init(void)
+{
+#ifdef CONFIG_DEBUG_FS
+ /* Create debugfs main directory if it doesn't exist yet */
+ if (stmmac_fs_dir == NULL) {
+ stmmac_fs_dir = debugfs_create_dir(STMMAC_RESOURCE_NAME, NULL);
+
+ if (!stmmac_fs_dir || IS_ERR(stmmac_fs_dir)) {
+ pr_err("ERROR %s, debugfs create directory failed\n",
+ STMMAC_RESOURCE_NAME);
+
+ return -ENOMEM;
+ }
+ }
+#endif
+
+ return 0;
+}
+
+static void __exit stmmac_exit(void)
+{
+#ifdef CONFIG_DEBUG_FS
+ debugfs_remove_recursive(stmmac_fs_dir);
+#endif
+}
+
+module_init(stmmac_init)
+module_exit(stmmac_exit)
+
MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet device driver");
MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
MODULE_LICENSE("GPL");

View File

@ -0,0 +1,145 @@
From e81de9d28bd0421c236df322872e64edf4ee1852 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Mon, 11 May 2015 16:32:09 -0700
Subject: [PATCH 7/8] ARM: dts: qcom: add mdio nodes to ap148 & db149
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 40 ++++++++++++++++++++++++++-
arch/arm/boot/dts/qcom-ipq8064-db149.dts | 46 ++++++++++++++++++++++++++++++++
2 files changed, 85 insertions(+), 1 deletion(-)
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -14,8 +14,9 @@
};
};
- alias {
+ aliases {
serial0 = &uart4;
+ mdio-gpio0 = &mdio0;
};
chosen {
@@ -54,6 +55,15 @@
bias-none;
};
};
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
};
gsbi@16300000 {
@@ -139,5 +149,33 @@
pinctrl-0 = <&pcie2_pins>;
pinctrl-names = "default";
};
+
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ device_type = "ethernet-phy";
+ reg = <4>;
+ };
+ };
};
};
--- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
@@ -16,6 +16,7 @@
alias {
serial0 = &uart2;
+ mdio-gpio0 = &mdio0;
};
chosen {
@@ -62,6 +63,15 @@
bias-none;
};
};
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
};
gsbi2: gsbi@12480000 {
@@ -173,5 +183,44 @@
pinctrl-0 = <&pcie3_pins>;
pinctrl-names = "default";
};
+
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ device_type = "ethernet-phy";
+ reg = <4>;
+ };
+
+ phy6: ethernet-phy@6 {
+ device_type = "ethernet-phy";
+ reg = <6>;
+ };
+
+ phy7: ethernet-phy@7 {
+ device_type = "ethernet-phy";
+ reg = <7>;
+ };
+ };
};
};

View File

@ -0,0 +1,210 @@
From cab1f4720e82f2e17eaeed9a9ad9e4f07c742977 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Mon, 11 May 2015 12:29:18 -0700
Subject: [PATCH 8/8] ARM: dts: qcom: add gmac nodes to ipq806x platforms
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 31 ++++++++++++
arch/arm/boot/dts/qcom-ipq8064-db149.dts | 43 ++++++++++++++++
arch/arm/boot/dts/qcom-ipq8064.dtsi | 86 ++++++++++++++++++++++++++++++++
3 files changed, 160 insertions(+)
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -64,6 +64,16 @@
bias-disable;
};
};
+
+ rgmii2_pins: rgmii2_pins {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
+ function = "rgmii2";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
};
gsbi@16300000 {
@@ -177,5 +187,26 @@
reg = <4>;
};
};
+
+ gmac1: ethernet@37200000 {
+ status = "ok";
+ phy-mode = "rgmii";
+ phy-handle = <&phy4>;
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+ };
+
+ gmac2: ethernet@37400000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
};
};
--- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
@@ -72,6 +72,14 @@
bias-disable;
};
};
+
+ rgmii0_pins: rgmii0_pins {
+ mux {
+ pins = "gpio2", "gpio66";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
};
gsbi2: gsbi@12480000 {
@@ -222,5 +230,40 @@
reg = <7>;
};
};
+
+ gmac0: ethernet@37000000 {
+ status = "ok";
+ phy-mode = "rgmii";
+ qcom,id = <0>;
+ phy-handle = <&phy4>;
+
+ pinctrl-0 = <&rgmii0_pins>;
+ pinctrl-names = "default";
+ };
+
+ gmac1: ethernet@37200000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <1>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ gmac2: ethernet@37400000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+ phy-handle = <&phy6>;
+ };
+
+ gmac3: ethernet@37600000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <3>;
+ phy-handle = <&phy7>;
+ };
};
};
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -540,5 +540,91 @@
status = "disabled";
};
+
+ nss_common: syscon@03000000 {
+ compatible = "syscon";
+ reg = <0x03000000 0x0000FFFF>;
+ };
+
+ qsgmii_csr: syscon@1bb00000 {
+ compatible = "syscon";
+ reg = <0x1bb00000 0x000001FF>;
+ };
+
+ gmac0: ethernet@37000000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac";
+ reg = <0x37000000 0x200000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE1_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE1_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
+ gmac1: ethernet@37200000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac";
+ reg = <0x37200000 0x200000>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE2_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE2_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
+ gmac2: ethernet@37400000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac";
+ reg = <0x37400000 0x200000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE3_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE3_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
+ gmac3: ethernet@37600000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac";
+ reg = <0x37600000 0x200000>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE4_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE4_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
};
};