ramips: add support for HiWiFi HC5861B

HiWiFi "Gee Enjoy1200" HC5861B is a dual-band router based on MediaTek MT7628AN
https://www.hiwifi.com/enjoy-view

Specifications:
- MediaTek MT7628AN 580MHz
- 128 MB DDR2 RAM
- 16 MB SPI Flash
- 2.4G MT7628AN 802.11bgn 2T2R 300Mbps
- 5G MT7612EN 802.11ac 2T2R 867Mbps
- 5x 10/100 Mbps Ethernet

Flash instruction:
1. Get SSH access to the router
2. SSH to router with `ssh -p 1022 root@192.168.199.1`, The SSH password is the same as the webconfig one
3. Upload OpenWrt sysupgrade firmware into the router's `/tmp` folder with SCP
4. Run `mtd write /tmp/<filename> firmware`
5. reboot

Everything is working

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
openwrt-19.07
Deng Qingfang 2018-08-10 01:22:46 +08:00 committed by Mathias Kresin
parent 1213504750
commit d20f4fc628
5 changed files with 155 additions and 1 deletions

View File

@ -240,6 +240,9 @@ hg255d)
set_usb_led "$boardname:green:usb"
ucidef_set_led_netdev "internet" "internet" "$boardname:green:internet" "eth0.2"
;;
hiwifi,hc5861b)
set_wifi_led "$boardname:green:wlan2g"
;;
hpm)
ucidef_set_led_default "power" "POWER" "$boardname:orange:power" "1"
ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0"

View File

@ -199,6 +199,7 @@ ramips_setup_interfaces()
gl-mt300n|\
gl-mt750|\
hg255d|\
hiwifi,hc5861b|\
jhr-n805r|\
jhr-n825r|\
jhr-n926r|\
@ -483,7 +484,8 @@ ramips_setup_macs()
;;
hc5*61|\
hc5661a|\
hc5962)
hc5962|\
hiwifi,hc5861b)
lan_mac=`mtd_get_mac_ascii bdinfo "Vfac_mac "`
[ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
wan_mac=$(macaddr_add "$lan_mac" 1)

View File

@ -73,6 +73,7 @@ platform_check_image() {
hc5*61|\
hc5661a|\
hg255d|\
hiwifi,hc5861b|\
hlk-rm04|\
hpm|\
ht-tm02|\

View File

@ -0,0 +1,141 @@
/dts-v1/;
#include "mt7628an.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "hiwifi,hc5861b", "mediatek,mt7628an-soc";
model = "HiWiFi HC5861B";
aliases {
led-status = &led_system;
};
chosen {
bootargs = "console=ttyS0,115200";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x8000000>;
};
gpio-leds {
compatible = "gpio-leds";
led_system: system {
label = "hc5861b:green:system";
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
wlan2g {
label = "hc5861b:green:wlan2g";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
};
};
gpio-keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "refclk", "wdt", "wled_an";
ralink,function = "gpio";
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "hw_panic";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xf70000>;
};
partition@fc0000 {
label = "oem";
reg = <0xfc0000 0x20000>;
read-only;
};
bdinfo: partition@fe0000 {
label = "bdinfo";
reg = <0xfe0000 0x10000>;
read-only;
};
partition@ff0000 {
label = "backup";
reg = <0xff0000 0x10000>;
read-only;
};
};
};
};
&ethernet {
mtd-mac-address = <&factory 0x4>;
};
&wmac {
status = "okay";
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
mtd-mac-address = <&factory 0x2e>;
ieee80211-freq-limit = <5000000 6000000>;
led {
led-sources = <2>;
led-active-low;
};
};
};

View File

@ -69,6 +69,13 @@ define Device/hc5661a
endef
TARGET_DEVICES += hc5661a
define Device/hiwifi_hc5861b
DTS := HC5861B
IMAGE_SIZE := 15808k
DEVICE_TITLE := HiWiFi HC5861B
endef
TARGET_DEVICES += hiwifi_hc5861b
define Device/LinkIt7688
DTS := LINKIT7688
IMAGE_SIZE := $(ralink_default_fw_size_32M)