mirror of https://github.com/hak5/openwrt.git
Convert the NAND driver to platform_driver, allow tgz image to be built correctly
SVN-Revision: 8058lede-17.01
Florian Fainelli
parent
90e990be2b
commit
cfddec3e1d
|
|
@ -128,6 +128,8 @@ static struct platform_device cf_slot0 = {
|
|||
static struct resource nand_slot0_res[] = {
|
||||
{
|
||||
.name = "nand_membase",
|
||||
.start = 0x18a20000,
|
||||
.end = (0x18a20000+0x1000)-1,
|
||||
.flags = IORESOURCE_MEM
|
||||
}
|
||||
};
|
||||
|
|
|
|||
|
|
@ -1,8 +1,11 @@
|
|||
#include <linux/init.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mtd/nand.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/delay.h>
|
||||
|
||||
#include <asm/io.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/bootinfo.h>
|
||||
|
|
@ -29,7 +32,30 @@
|
|||
#define LO_ULED (1 << 7)
|
||||
|
||||
#define MEM32(x) *((volatile unsigned *) (x))
|
||||
static void __iomem *p_nand;
|
||||
|
||||
struct rb500_nand_info {
|
||||
struct nand_chip chip;
|
||||
struct mtd_info mtd;
|
||||
void __iomem *io_base;
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
int nr_parts;
|
||||
struct mtd_partition *parts;
|
||||
#endif
|
||||
int init_ok;
|
||||
int flags1;
|
||||
int flags2;
|
||||
};
|
||||
|
||||
static struct mtd_partition partition_info[] = {
|
||||
{
|
||||
name:"RouterBoard NAND Boot",
|
||||
offset:0,
|
||||
size:4 * 1024 * 1024},
|
||||
{
|
||||
name:"rootfs",
|
||||
offset:MTDPART_OFS_NXTBLK,
|
||||
size:MTDPART_SIZ_FULL}
|
||||
};
|
||||
|
||||
extern void changeLatchU5(unsigned char orMask, unsigned char nandMask);
|
||||
|
||||
|
|
@ -66,72 +92,121 @@ static void rbmips_hwcontrol500(struct mtd_info *mtd, int cmd,
|
|||
|
||||
}
|
||||
|
||||
static struct mtd_partition partition_info[] = {
|
||||
unsigned get_rbnand_block_size(struct rb500_nand_info *data)
|
||||
{
|
||||
name:"RouterBoard NAND Boot",
|
||||
offset:0,
|
||||
size:4 * 1024 * 1024},
|
||||
{
|
||||
name:"RouterBoard NAND Main",
|
||||
offset:MTDPART_OFS_NXTBLK,
|
||||
size:MTDPART_SIZ_FULL}
|
||||
};
|
||||
|
||||
static struct mtd_info rmtd;
|
||||
static struct nand_chip rnand;
|
||||
|
||||
static unsigned init_ok = 0;
|
||||
|
||||
unsigned get_rbnand_block_size(void)
|
||||
{
|
||||
if (init_ok)
|
||||
return rmtd.writesize;
|
||||
if (data->init_ok)
|
||||
return data->mtd.writesize;
|
||||
else
|
||||
return 0;
|
||||
}
|
||||
|
||||
EXPORT_SYMBOL(get_rbnand_block_size);
|
||||
|
||||
int __init rbmips_init(void)
|
||||
static int rbmips_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct rb500_nand_info *data;
|
||||
int res = 0;
|
||||
int *b;
|
||||
memset(&rmtd, 0, sizeof(rmtd));
|
||||
memset(&rnand, 0, sizeof(rnand));
|
||||
|
||||
printk("RB500 nand\n");
|
||||
changeLatchU5(LO_FOFF | LO_CEX,
|
||||
LO_ULED | LO_ALE | LO_CLE | LO_WPX);
|
||||
rnand.cmd_ctrl = rbmips_hwcontrol500;
|
||||
|
||||
rnand.dev_ready = rb500_dev_ready;
|
||||
rnand.IO_ADDR_W = (unsigned char *)
|
||||
KSEG1ADDR(MEM32(IDT434_REG_BASE + DEV2BASE));
|
||||
rnand.IO_ADDR_R = rnand.IO_ADDR_W;
|
||||
|
||||
p_nand = (void __iomem *) ioremap((void *) 0x18a20000, 0x1000);
|
||||
if (!p_nand) {
|
||||
printk("RBnand Unable ioremap buffer");
|
||||
return -ENXIO;
|
||||
/* Allocate memory for the structure */
|
||||
data = kzalloc(sizeof(*data), GFP_KERNEL);
|
||||
if (!data) {
|
||||
dev_err(&pdev->dev, "Failed to allocate device structure\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
rnand.ecc.mode = NAND_ECC_SOFT;
|
||||
rnand.chip_delay = 25;
|
||||
rnand.options |= NAND_NO_AUTOINCR;
|
||||
rmtd.priv = &rnand;
|
||||
|
||||
data->io_base = ioremap(pdev->resource[0].start, pdev->resource[0].end - pdev->resource[0].start + 1);
|
||||
|
||||
if (data->io_base == NULL) {
|
||||
dev_err(&pdev->dev, "ioremap failed\n");
|
||||
kfree(data);
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
/* FIXME : this seems to work only for newer RB500, check the version to set the right flags accordingly */
|
||||
data->flags1 = LO_FOFF | LO_CEX;
|
||||
data->flags2 = LO_ULED | LO_ALE | LO_CLE | LO_WPX;
|
||||
|
||||
changeLatchU5(data->flags1, data->flags2);
|
||||
|
||||
data->chip.cmd_ctrl = rbmips_hwcontrol500;
|
||||
|
||||
data->chip.dev_ready = rb500_dev_ready;
|
||||
data->chip.IO_ADDR_W = (unsigned char *)KSEG1ADDR(MEM32(IDT434_REG_BASE + DEV2BASE));
|
||||
data->chip.IO_ADDR_R = data->chip.IO_ADDR_W;
|
||||
|
||||
data->chip.ecc.mode = NAND_ECC_SOFT;
|
||||
data->chip.chip_delay = 25;
|
||||
data->chip.options |= NAND_NO_AUTOINCR;
|
||||
|
||||
data->chip.priv = &data;
|
||||
data->mtd.priv = &data->chip;
|
||||
data->mtd.owner = THIS_MODULE;
|
||||
|
||||
b = (int *) KSEG1ADDR(0x18010020);
|
||||
printk("dev2base 0x%08x mask 0x%08x c 0x%08x tc 0x%08x\n", b[0],
|
||||
b[1], b[2], b[3]);
|
||||
|
||||
if (nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)
|
||||
&& nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)) {
|
||||
printk("RBxxx nand device not found\n");
|
||||
iounmap((void *) p_nand);
|
||||
return -ENXIO;
|
||||
platform_set_drvdata(pdev, data);
|
||||
|
||||
/* Why do we need to scan 4 times ? */
|
||||
if (nand_scan(&data->mtd, 1) && nand_scan(&data->mtd, 1) && nand_scan(&data->mtd, 1) && nand_scan(&data->mtd, 1)) {
|
||||
printk(KERN_INFO "RB500 nand device not found\n");
|
||||
res = -ENXIO;
|
||||
goto out;
|
||||
}
|
||||
|
||||
add_mtd_partitions(&rmtd, partition_info, 2);
|
||||
init_ok = 1;
|
||||
printk(KERN_INFO "RB500 NAND\n");
|
||||
add_mtd_partitions(&data->mtd, partition_info, 2);
|
||||
data->init_ok = 1;
|
||||
|
||||
res = add_mtd_device(&data->mtd);
|
||||
if (!res)
|
||||
return res;
|
||||
|
||||
nand_release(&data->mtd);
|
||||
out:
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
iounmap(data->io_base);
|
||||
kfree(data);
|
||||
return res;
|
||||
}
|
||||
|
||||
static int __devexit rbmips_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct rb500_nand_info *data = platform_get_drvdata(pdev);
|
||||
|
||||
nand_release(&data->mtd);
|
||||
iounmap(data->io_base);
|
||||
kfree(data);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
module_init(rbmips_init);
|
||||
static struct platform_driver rb500_nand_driver = {
|
||||
.probe = rbmips_probe,
|
||||
.remove = rbmips_remove,
|
||||
.driver = {
|
||||
.name = "rb500-nand",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
||||
static int __init rb500_nand_init(void)
|
||||
{
|
||||
int err;
|
||||
err = platform_driver_register(&rb500_nand_driver);
|
||||
return err;
|
||||
}
|
||||
|
||||
static void __exit rb500_nand_exit(void)
|
||||
{
|
||||
platform_driver_unregister(&rb500_nand_driver);
|
||||
}
|
||||
|
||||
module_init(rb500_nand_init);
|
||||
module_exit(rb500_nand_exit);
|
||||
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_AUTHOR("David Goodenough, Felix Fietkau, Florian Fainelli");
|
||||
MODULE_DESCRIPTION("RouterBOARD 500 NAND driver");
|
||||
|
|
|
|||
|
|
@ -49,9 +49,16 @@ define Image/cmdline/squashfs
|
|||
block2mtd.block2mtd=/dev/cfa2,65536 root=/dev/mtdblock0 rootfstype=squashfs init=/etc/preinit
|
||||
endef
|
||||
|
||||
# TGZ images should be used with a yaffs2 rootfs
|
||||
define Image/cmdline/tgz
|
||||
root=/dev/mtdblock1 rootfstype=yaffs2 init=/etc/preinit
|
||||
endef
|
||||
|
||||
define Image/Build
|
||||
$(STAGING_DIR)/bin/patch-cmdline $(KDIR)/vmlinux.elf '$(strip $(call Image/cmdline/$(1))) '
|
||||
ifneq ($(1),tgz)
|
||||
./gen_image.sh $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin 4 $(KDIR)/vmlinux.elf $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)
|
||||
endif
|
||||
endef
|
||||
|
||||
$(eval $(call BuildImage))
|
||||
|
|
|
|||
Loading…
Reference in New Issue