mirror of https://github.com/hak5/openwrt.git
Florian Fainelli
parent
50c5e5d9c9
commit
cea3074292
|
|
@ -1,7 +1,7 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.19
|
||||
# Thu Dec 14 00:45:45 2006
|
||||
# Linux kernel version: 2.6.19.1
|
||||
# Thu Dec 28 03:16:16 2006
|
||||
#
|
||||
CONFIG_MIPS=y
|
||||
|
||||
|
|
@ -1142,7 +1142,56 @@ CONFIG_HW_RANDOM=y
|
|||
#
|
||||
# I2C support
|
||||
#
|
||||
# CONFIG_I2C is not set
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=m
|
||||
|
||||
#
|
||||
# I2C Algorithms
|
||||
#
|
||||
CONFIG_I2C_ALGOBIT=m
|
||||
CONFIG_I2C_ALGOPCF=m
|
||||
CONFIG_I2C_ALGOPCA=m
|
||||
|
||||
#
|
||||
# I2C Hardware Bus support
|
||||
#
|
||||
# CONFIG_I2C_ALI1535 is not set
|
||||
# CONFIG_I2C_ALI1563 is not set
|
||||
# CONFIG_I2C_ALI15X3 is not set
|
||||
# CONFIG_I2C_AMD756 is not set
|
||||
# CONFIG_I2C_AMD8111 is not set
|
||||
CONFIG_I2C_AU1X00GPIO=y
|
||||
# CONFIG_I2C_I801 is not set
|
||||
# CONFIG_I2C_I810 is not set
|
||||
# CONFIG_I2C_PIIX4 is not set
|
||||
# CONFIG_I2C_NFORCE2 is not set
|
||||
# CONFIG_I2C_OCORES is not set
|
||||
# CONFIG_I2C_PARPORT_LIGHT is not set
|
||||
# CONFIG_I2C_PROSAVAGE is not set
|
||||
# CONFIG_I2C_SAVAGE4 is not set
|
||||
# CONFIG_I2C_SIS5595 is not set
|
||||
# CONFIG_I2C_SIS630 is not set
|
||||
# CONFIG_I2C_SIS96X is not set
|
||||
# CONFIG_I2C_STUB is not set
|
||||
# CONFIG_I2C_VIA is not set
|
||||
# CONFIG_I2C_VIAPRO is not set
|
||||
# CONFIG_I2C_VOODOO3 is not set
|
||||
# CONFIG_I2C_PCA_ISA is not set
|
||||
|
||||
#
|
||||
# Miscellaneous I2C Chip support
|
||||
#
|
||||
# CONFIG_SENSORS_DS1337 is not set
|
||||
# CONFIG_SENSORS_DS1374 is not set
|
||||
# CONFIG_SENSORS_EEPROM is not set
|
||||
# CONFIG_SENSORS_PCF8574 is not set
|
||||
# CONFIG_SENSORS_PCA9539 is not set
|
||||
# CONFIG_SENSORS_PCF8591 is not set
|
||||
# CONFIG_SENSORS_MAX6875 is not set
|
||||
# CONFIG_I2C_DEBUG_CORE is not set
|
||||
# CONFIG_I2C_DEBUG_ALGO is not set
|
||||
# CONFIG_I2C_DEBUG_BUS is not set
|
||||
# CONFIG_I2C_DEBUG_CHIP is not set
|
||||
|
||||
#
|
||||
# SPI support
|
||||
|
|
|
|||
|
|
@ -0,0 +1,16 @@
|
|||
diff -urN linux-2.6.19/arch/mips/pci/ops-au1000.c linux-2.6.19.new/arch/mips/pci/ops-au1000.c
|
||||
--- linux-2.6.19/arch/mips/pci/ops-au1000.c 2006-11-29 22:57:37.000000000 +0100
|
||||
+++ linux-2.6.19.new/arch/mips/pci/ops-au1000.c 2006-12-28 03:02:42.000000000 +0100
|
||||
@@ -172,7 +172,11 @@
|
||||
error = -1;
|
||||
DBG("Au1x Master Abort\n");
|
||||
} else if ((status >> 28) & 0xf) {
|
||||
- DBG("PCI ERR detected: status %x\n", status);
|
||||
+ DBG("PCI ERR detected: device %d, status %x\n", device, ((status >> 28) & 0xf));
|
||||
+
|
||||
+ /* clear errors */
|
||||
+ au_writel(status & 0xf000ffff, Au1500_PCI_STATCMD);
|
||||
+
|
||||
*data = 0xffffffff;
|
||||
error = -1;
|
||||
}
|
||||
|
|
@ -0,0 +1,456 @@
|
|||
diff -urN linux-2.6.19/drivers/i2c/busses/Kconfig linux-2.6.19.new/drivers/i2c/busses/Kconfig
|
||||
--- linux-2.6.19/drivers/i2c/busses/Kconfig 2006-11-29 22:57:37.000000000 +0100
|
||||
+++ linux-2.6.19.new/drivers/i2c/busses/Kconfig 2006-12-28 17:04:34.000000000 +0100
|
||||
@@ -84,6 +84,16 @@
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called i2c-au1550.
|
||||
|
||||
+config I2C_AU1X00GPIO
|
||||
+ tristate "Au1x00 i2c using GPIO pins"
|
||||
+ depends on I2C && MTX1
|
||||
+ help
|
||||
+ If you say yest to this option, support will be included for the
|
||||
+ Au1x00 GPIO interface.
|
||||
+
|
||||
+ This driver can also be built as a module. If so, the module
|
||||
+ will be called i2c-au1x00gpio.
|
||||
+
|
||||
config I2C_ELEKTOR
|
||||
tristate "Elektor ISA card"
|
||||
depends on I2C && ISA && BROKEN_ON_SMP
|
||||
diff -urN linux-2.6.19/drivers/i2c/busses/Makefile linux-2.6.19.new/drivers/i2c/busses/Makefile
|
||||
--- linux-2.6.19/drivers/i2c/busses/Makefile 2006-11-29 22:57:37.000000000 +0100
|
||||
+++ linux-2.6.19.new/drivers/i2c/busses/Makefile 2006-12-28 03:07:37.000000000 +0100
|
||||
@@ -9,6 +9,7 @@
|
||||
obj-$(CONFIG_I2C_AMD756_S4882) += i2c-amd756-s4882.o
|
||||
obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o
|
||||
obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
|
||||
+obj-$(CONFIG_I2C_AU1X00GPIO) += i2c-au1x00gpio.o
|
||||
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
|
||||
obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o
|
||||
obj-$(CONFIG_I2C_I801) += i2c-i801.o
|
||||
diff -urN linux-2.6.19/drivers/i2c/busses/i2c-au1x00gpio.c linux-2.6.19.new/drivers/i2c/busses/i2c-au1x00gpio.c
|
||||
--- linux-2.6.19/drivers/i2c/busses/i2c-au1x00gpio.c 1970-01-01 01:00:00.000000000 +0100
|
||||
+++ linux-2.6.19.new/drivers/i2c/busses/i2c-au1x00gpio.c 2006-12-28 17:02:10.000000000 +0100
|
||||
@@ -0,0 +1,421 @@
|
||||
+/* ------------------------------------------------------------------------- */
|
||||
+/* i2c-au1x00gpio.c i2c-hw access for Au1x00 GPIO pins. */
|
||||
+/* ------------------------------------------------------------------------- */
|
||||
+/* Copyright (C) 1995-2000 Michael Stickel
|
||||
+
|
||||
+ This program is free software; you can redistribute it and/or modify
|
||||
+ it under the terms of the GNU General Public License as published by
|
||||
+ the Free Software Foundation; either version 2 of the License, or
|
||||
+ (at your option) any later version.
|
||||
+
|
||||
+ This program is distributed in the hope that it will be useful,
|
||||
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
+ GNU General Public License for more details.
|
||||
+
|
||||
+ You should have received a copy of the GNU General Public License
|
||||
+ along with this program; if not, write to the Free Software
|
||||
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
|
||||
+/* ------------------------------------------------------------------------- */
|
||||
+
|
||||
+/* With some changes from Ky<4B>stialkki <kmalkki@cc.hut.fi> and even
|
||||
+ Frodo Looijaard <frodol@dds.nl>
|
||||
+ Simon G. Vogl
|
||||
+*/
|
||||
+
|
||||
+/* $Id: i2c-au1x00gpio.c,v 1.1.1.2 2004/01/22 15:35:47 br1 Exp $ */
|
||||
+
|
||||
+#include <linux/module.h>
|
||||
+#include <linux/types.h>
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/stddef.h>
|
||||
+#include <linux/ioport.h>
|
||||
+#include <asm/uaccess.h>
|
||||
+#include <asm/io.h>
|
||||
+#include <asm-mips/mach-au1x00/au1000.h>
|
||||
+#include <asm-mips/mach-au1x00/au1000_gpio.h>
|
||||
+
|
||||
+#include <linux/slab.h>
|
||||
+#include <linux/mm.h>
|
||||
+
|
||||
+#include <linux/i2c.h>
|
||||
+#include <linux/i2c-algo-bit.h>
|
||||
+
|
||||
+#ifndef __exit
|
||||
+#define __exit __init
|
||||
+#endif
|
||||
+
|
||||
+
|
||||
+struct i2c_au1x00gpio
|
||||
+{
|
||||
+ struct i2c_au1x00gpio *next;
|
||||
+
|
||||
+ short scl_gpio;
|
||||
+ short sda_gpio;
|
||||
+
|
||||
+ unsigned long scl_mask;
|
||||
+ unsigned long sda_mask;
|
||||
+
|
||||
+ struct i2c_adapter adapter;
|
||||
+ struct i2c_algo_bit_data bit_au1x00gpio_data;
|
||||
+};
|
||||
+
|
||||
+static struct i2c_au1x00gpio *adapter_list;
|
||||
+
|
||||
+
|
||||
+
|
||||
+/* ----- global defines ----------------------------------------------- */
|
||||
+#define DEB(x) /* should be reasonable open, close &c. */
|
||||
+#define DEB2(x) /* low level debugging - very slow */
|
||||
+#define DEBE(x) x /* error messages */
|
||||
+
|
||||
+/* ----- printer port defines ------------------------------------------*/
|
||||
+
|
||||
+/* ----- local functions ---------------------------------------------- */
|
||||
+
|
||||
+
|
||||
+//-- Primary GPIO
|
||||
+static void bit_au1x00gpio_setscl(void *data, int state)
|
||||
+{
|
||||
+ struct i2c_au1x00gpio * adapter = (struct i2c_au1x00gpio *)data;
|
||||
+ if (state)
|
||||
+ au_writel(adapter->scl_mask, SYS_TRIOUTCLR); // Disable Driver: Switch off Transistor => 1
|
||||
+ else
|
||||
+ au_writel(adapter->scl_mask, SYS_OUTPUTCLR); // Clear Output and switch on Transistor => 0
|
||||
+}
|
||||
+
|
||||
+
|
||||
+static void bit_au1x00gpio_setsda(void *data, int state)
|
||||
+{
|
||||
+ struct i2c_au1x00gpio * adapter = (struct i2c_au1x00gpio *)data;
|
||||
+ if (state)
|
||||
+ au_writel(adapter->sda_mask, SYS_TRIOUTCLR);
|
||||
+ else
|
||||
+ au_writel(adapter->sda_mask, SYS_OUTPUTCLR);
|
||||
+}
|
||||
+
|
||||
+
|
||||
+static int bit_au1x00gpio_getscl(void *data)
|
||||
+{
|
||||
+ struct i2c_au1x00gpio * adapter = (struct i2c_au1x00gpio *)data;
|
||||
+ return (au_readl(SYS_PINSTATERD) & adapter->scl_mask) ? 1 : 0;
|
||||
+}
|
||||
+
|
||||
+
|
||||
+static int bit_au1x00gpio_getsda(void *data)
|
||||
+{
|
||||
+ struct i2c_au1x00gpio * adapter = (struct i2c_au1x00gpio *)data;
|
||||
+ return (au_readl(SYS_PINSTATERD) & adapter->sda_mask) ? 1 : 0;
|
||||
+}
|
||||
+
|
||||
+
|
||||
+
|
||||
+
|
||||
+/*--
|
||||
+ *-- Functions for accessing GPIO-2
|
||||
+ *--
|
||||
+ */
|
||||
+static void bit_au1x00gpio2_setscl(void *data, int state)
|
||||
+{
|
||||
+ struct i2c_au1x00gpio * adapter = (struct i2c_au1x00gpio *)data;
|
||||
+ if (state)
|
||||
+ {
|
||||
+ au_writel(au_readl(GPIO2_DIR) & ~adapter->scl_mask, GPIO2_DIR);
|
||||
+ }
|
||||
+ else
|
||||
+ {
|
||||
+ au_writel(au_readl(GPIO2_OUTPUT) & ~adapter->scl_mask, GPIO2_OUTPUT);
|
||||
+ au_writel(au_readl(GPIO2_DIR) | adapter->scl_mask, GPIO2_DIR);
|
||||
+ }
|
||||
+}
|
||||
+
|
||||
+static void bit_au1x00gpio2_setsda(void *data, int state)
|
||||
+{
|
||||
+ struct i2c_au1x00gpio * adapter = (struct i2c_au1x00gpio *)data;
|
||||
+ if (state)
|
||||
+ {
|
||||
+ au_writel(au_readl(GPIO2_DIR) & ~adapter->sda_mask, GPIO2_DIR);
|
||||
+ }
|
||||
+ else
|
||||
+ {
|
||||
+ au_writel(au_readl(GPIO2_OUTPUT) & ~adapter->sda_mask, GPIO2_OUTPUT);
|
||||
+ au_writel(au_readl(GPIO2_DIR) | adapter->sda_mask, GPIO2_DIR);
|
||||
+ }
|
||||
+}
|
||||
+
|
||||
+static int bit_au1x00gpio2_getscl(void *data)
|
||||
+{
|
||||
+ struct i2c_au1x00gpio * adapter = (struct i2c_au1x00gpio *)data;
|
||||
+ return (au_readl(GPIO2_PINSTATE) & adapter->scl_mask) ? 1 : 0;
|
||||
+}
|
||||
+
|
||||
+static int bit_au1x00gpio2_getsda(void *data)
|
||||
+{
|
||||
+ struct i2c_au1x00gpio * adapter = (struct i2c_au1x00gpio *)data;
|
||||
+ return (au_readl(GPIO2_PINSTATE) & adapter->sda_mask) ? 1 : 0;
|
||||
+}
|
||||
+
|
||||
+
|
||||
+
|
||||
+static int check_i2c_au1x00gpio_adapter(struct i2c_au1x00gpio *adapter)
|
||||
+{
|
||||
+ int state = 0;
|
||||
+
|
||||
+ adapter->bit_au1x00gpio_data.setsda (adapter, 1);
|
||||
+ adapter->bit_au1x00gpio_data.setscl (adapter, 1);
|
||||
+
|
||||
+ if (adapter->bit_au1x00gpio_data.getsda(adapter)==0)
|
||||
+ {
|
||||
+ printk ("i2c-au1x00gpio: sda line should read 1 but reads 0\n");
|
||||
+ state = -1;
|
||||
+ }
|
||||
+ if (adapter->bit_au1x00gpio_data.getscl(adapter)==0)
|
||||
+ {
|
||||
+ printk ("i2c-au1x00gpio: scl line should read 1 but reads 0\n");
|
||||
+ state = -1;
|
||||
+ }
|
||||
+
|
||||
+
|
||||
+ adapter->bit_au1x00gpio_data.setsda (adapter, 0);
|
||||
+ adapter->bit_au1x00gpio_data.setscl (adapter, 0);
|
||||
+
|
||||
+ if (adapter->bit_au1x00gpio_data.getsda(adapter)==1)
|
||||
+ {
|
||||
+ printk ("i2c-au1x00gpio: sda line should read 0 but reads 1\n");
|
||||
+ state = -1;
|
||||
+ }
|
||||
+ if (adapter->bit_au1x00gpio_data.getscl(adapter)==1)
|
||||
+ {
|
||||
+ printk ("i2c-au1x00gpio: scl line should read 0 but reads 1\n");
|
||||
+ state = -1;
|
||||
+ }
|
||||
+
|
||||
+ if (state==0)
|
||||
+ printk ("i2c-au1x00gpio: adapter with scl=GPIO%d,sda=GPIO%d is working\n",
|
||||
+ adapter->scl_gpio, adapter->sda_gpio
|
||||
+ );
|
||||
+ return state;
|
||||
+}
|
||||
+
|
||||
+
|
||||
+
|
||||
+#if 0
|
||||
+static int bit_au1x00gpio_reg(struct i2c_client *client)
|
||||
+{
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int bit_au1x00gpio_unreg(struct i2c_client *client)
|
||||
+{
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static void bit_au1x00gpio_inc_use(struct i2c_adapter *adap)
|
||||
+{
|
||||
+ MOD_INC_USE_COUNT;
|
||||
+}
|
||||
+
|
||||
+static void bit_au1x00gpio_dec_use(struct i2c_adapter *adap)
|
||||
+{
|
||||
+ MOD_DEC_USE_COUNT;
|
||||
+}
|
||||
+#endif
|
||||
+
|
||||
+
|
||||
+
|
||||
+static struct i2c_algo_bit_data bit_au1x00gpio_data = {
|
||||
+ .data = NULL,
|
||||
+ .setsda = bit_au1x00gpio_setsda,
|
||||
+ .setscl = bit_au1x00gpio_setscl,
|
||||
+ .getsda = bit_au1x00gpio_getsda,
|
||||
+ .getscl = bit_au1x00gpio_getscl,
|
||||
+ .udelay = 80,
|
||||
+ .timeout = HZ,
|
||||
+};
|
||||
+
|
||||
+
|
||||
+static struct i2c_adapter bit_au1x00gpio_ops = {
|
||||
+ .owner = THIS_MODULE,
|
||||
+ .name = "Au1x00 GPIO I2C adapter",
|
||||
+ .id = I2C_HW_B_AU1x00GPIO,
|
||||
+};
|
||||
+
|
||||
+
|
||||
+
|
||||
+/*
|
||||
+ * scl_gpio:
|
||||
+ * 0..31 for primary GPIO's
|
||||
+ * 200..215 for secondary GPIO's
|
||||
+ *
|
||||
+ * sda_gpio:
|
||||
+ * 0..31 for primary GPIO's
|
||||
+ * 200..215 for secondary GPIO's
|
||||
+ *
|
||||
+ * You can even mix primary and secondary GPIO's.
|
||||
+ * E.g.: i2c_au1x00gpio_create(4,206);
|
||||
+ */
|
||||
+
|
||||
+static int i2c_au1x00gpio_create (int scl_gpio, int sda_gpio)
|
||||
+{
|
||||
+ if ((scl_gpio < 32 || (scl_gpio >= 200 && scl_gpio <= 215)) &&
|
||||
+ (scl_gpio < 32 || (scl_gpio >= 200 && scl_gpio <= 215)))
|
||||
+ {
|
||||
+ struct i2c_au1x00gpio *adapter = kmalloc(sizeof(struct i2c_au1x00gpio),
|
||||
+ GFP_KERNEL);
|
||||
+ if (!adapter) {
|
||||
+ printk(KERN_ERR "i2c-au1x00-gpio: Unable to malloc.\n");
|
||||
+ return -1;
|
||||
+ }
|
||||
+
|
||||
+ printk(KERN_DEBUG "i2c-au1x00-gpio.o: attaching to SCL=GPIO%d, SDA=GPIO%d\n",
|
||||
+ scl_gpio, sda_gpio);
|
||||
+
|
||||
+ memset (adapter, 0, sizeof(struct i2c_au1x00gpio));
|
||||
+
|
||||
+ adapter->adapter = bit_au1x00gpio_ops;
|
||||
+
|
||||
+ adapter->adapter.algo_data = &adapter->bit_au1x00gpio_data;
|
||||
+ adapter->bit_au1x00gpio_data = bit_au1x00gpio_data;
|
||||
+ adapter->bit_au1x00gpio_data.data = adapter;
|
||||
+
|
||||
+ adapter->bit_au1x00gpio_data.data = adapter;
|
||||
+
|
||||
+ adapter->scl_gpio = scl_gpio;
|
||||
+ adapter->sda_gpio = sda_gpio;
|
||||
+
|
||||
+ if (sda_gpio < 32)
|
||||
+ {
|
||||
+ adapter->bit_au1x00gpio_data.setsda = bit_au1x00gpio_setsda;
|
||||
+ adapter->bit_au1x00gpio_data.getsda = bit_au1x00gpio_getsda;
|
||||
+ adapter->sda_mask = 1<<sda_gpio;
|
||||
+ }
|
||||
+ else if (sda_gpio >= 200 && sda_gpio <= 215)
|
||||
+ {
|
||||
+ adapter->bit_au1x00gpio_data.setsda = bit_au1x00gpio2_setsda;
|
||||
+ adapter->bit_au1x00gpio_data.getsda = bit_au1x00gpio2_getsda;
|
||||
+ adapter->sda_mask = 1<<(sda_gpio-200);
|
||||
+ }
|
||||
+
|
||||
+
|
||||
+ if (scl_gpio < 32)
|
||||
+ {
|
||||
+ adapter->bit_au1x00gpio_data.setscl = bit_au1x00gpio_setscl;
|
||||
+ adapter->bit_au1x00gpio_data.getscl = bit_au1x00gpio_getscl;
|
||||
+ adapter->scl_mask = 1<<scl_gpio;
|
||||
+ }
|
||||
+ else if (scl_gpio >= 200 && scl_gpio <= 215)
|
||||
+ {
|
||||
+ adapter->bit_au1x00gpio_data.setscl = bit_au1x00gpio2_setscl;
|
||||
+ adapter->bit_au1x00gpio_data.getscl = bit_au1x00gpio2_getscl;
|
||||
+ adapter->scl_mask = 1<<(scl_gpio-200);
|
||||
+ }
|
||||
+
|
||||
+ au_writel(0L, SYS_PININPUTEN);
|
||||
+ if (check_i2c_au1x00gpio_adapter(adapter)==0)
|
||||
+ {
|
||||
+ adapter->bit_au1x00gpio_data.setsda (adapter, 1);
|
||||
+ adapter->bit_au1x00gpio_data.setscl (adapter, 1);
|
||||
+
|
||||
+ if (i2c_bit_add_bus(&adapter->adapter) < 0)
|
||||
+ {
|
||||
+ printk(KERN_ERR "i2c-au1x00-gpio: Unable to register with I2C.\n");
|
||||
+ kfree(adapter);
|
||||
+ return -1; /* No good */
|
||||
+ }
|
||||
+
|
||||
+ adapter->next = adapter_list;
|
||||
+ adapter_list = adapter;
|
||||
+ return 0;
|
||||
+ }
|
||||
+ }
|
||||
+ else
|
||||
+ printk(KERN_ERR "i2c-au1x00-gpio: Invalid argument scl_gpio=%d, sda_gpio=%d.\n", scl_gpio, sda_gpio);
|
||||
+ return -1;
|
||||
+}
|
||||
+
|
||||
+
|
||||
+
|
||||
+static void i2c_au1x00gpio_delete (int scl_gpio, int sda_gpio)
|
||||
+{
|
||||
+ struct i2c_au1x00gpio *adapter, *prev = NULL;
|
||||
+
|
||||
+ for (adapter = adapter_list; adapter; adapter = adapter->next)
|
||||
+ {
|
||||
+ if (adapter->scl_gpio == scl_gpio &&
|
||||
+ adapter->sda_gpio == sda_gpio)
|
||||
+ {
|
||||
+ i2c_bit_del_bus(&adapter->adapter);
|
||||
+ if (prev)
|
||||
+ prev->next = adapter->next;
|
||||
+ else
|
||||
+ adapter_list = adapter->next;
|
||||
+ kfree(adapter);
|
||||
+ return;
|
||||
+ }
|
||||
+ prev = adapter;
|
||||
+ }
|
||||
+}
|
||||
+
|
||||
+
|
||||
+
|
||||
+
|
||||
+
|
||||
+#ifndef CONFIG_I2C_AU1X00GPIO_SCL
|
||||
+#define CONFIG_I2C_AU1X00GPIO_SCL (216)
|
||||
+#endif
|
||||
+
|
||||
+#ifndef CONFIG_I2C_AU1X00GPIO_SDA
|
||||
+#define CONFIG_I2C_AU1X00GPIO_SDA (217)
|
||||
+#endif
|
||||
+
|
||||
+static int au1x00gpiopin_scl = CONFIG_I2C_AU1X00GPIO_SCL;
|
||||
+static int au1x00gpiopin_sda = CONFIG_I2C_AU1X00GPIO_SDA;
|
||||
+
|
||||
+
|
||||
+
|
||||
+int __init i2c_bit_au1x00gpio_init(void)
|
||||
+{
|
||||
+ printk(KERN_INFO "i2c-au1x00gpio.o: i2c Au1x00 GPIO adapter module version\n");
|
||||
+
|
||||
+ if (i2c_au1x00gpio_create (au1x00gpiopin_scl, au1x00gpiopin_sda) == 0)
|
||||
+ {
|
||||
+ printk(KERN_INFO "i2c-au1x00gpio.o: registered I2C-Bus for GPIO%d,GPIO%d\n",
|
||||
+ au1x00gpiopin_scl, au1x00gpiopin_sda
|
||||
+ );
|
||||
+ return 0;
|
||||
+ }
|
||||
+ printk(KERN_INFO "i2c-au1x00gpio.o: failed to register I2C-Bus for GPIO%d,GPIO%d\n",
|
||||
+ au1x00gpiopin_scl, au1x00gpiopin_sda
|
||||
+ );
|
||||
+ return -1;
|
||||
+}
|
||||
+
|
||||
+
|
||||
+void __exit i2c_bit_au1x00gpio_exit(void)
|
||||
+{
|
||||
+ i2c_au1x00gpio_delete (au1x00gpiopin_scl, au1x00gpiopin_sda);
|
||||
+}
|
||||
+
|
||||
+module_param(au1x00gpiopin_scl, int, 0644);
|
||||
+MODULE_PARM_DESC(au1x00gpiopin_scl, "GPIO pin number used for SCL pin.");
|
||||
+
|
||||
+module_param(au1x00gpiopin_sda, int, 0644);
|
||||
+MODULE_PARM_DESC(au1x00gpiopin_sda, "GPIO pin number used for SDA pin.");
|
||||
+
|
||||
+MODULE_AUTHOR("Michael Stickel <michael@cubic.org>");
|
||||
+MODULE_DESCRIPTION("I2C-Bus adapter routines for Au1x00 GPIO adapter.");
|
||||
+MODULE_LICENSE("GPL");
|
||||
+
|
||||
+
|
||||
+#ifdef MODULE
|
||||
+int init_module(void)
|
||||
+{
|
||||
+ return i2c_bit_au1x00gpio_init();
|
||||
+}
|
||||
+
|
||||
+void cleanup_module(void)
|
||||
+{
|
||||
+ i2c_bit_au1x00gpio_exit();
|
||||
+}
|
||||
+#endif
|
||||
Loading…
Reference in New Issue