ramips: add support for ELECOM WRC-2533GST

ELECOM WRC-2533GST is a 2.4/5 GHz band 11ac rotuer, based on
MediaTek MT7621A.

Specification:

- MT7621A (2-Core, 4-Threads)
- 128 MB of RAM (DDR3)
- 16 MB of Flash (SPI)
- 4T4R 2.4/5 GHz wifi
  - MediaTek MT7615
- 5x 10/100/1000 Mbps Ethernet
- 4x LEDs, 6 keys (2x buttons, 1x slide switch)
- UART header on PCB
  - Vcc, GND, TX, RX from ethernet port side
  - baudrate: 57600 bps

Flash instruction using factory image:

1. Connect the computer to the LAN port of WRC-2533GST
2. Connect power cable to WRC-2533GST and turn on it
3. Access to "https://192.168.2.1/" and open firmware update
page ("ファームウェア更新")
4. Select the OpenWrt factory image and click apply ("適用")
button
5. Wait ~150 seconds to complete flashing

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
openwrt-19.07
INAGAKI Hiroshi 2018-07-26 23:24:22 +09:00 committed by John Crispin
parent 869b0d11db
commit ce93445cd6
4 changed files with 204 additions and 0 deletions

View File

@ -232,6 +232,7 @@ ramips_setup_interfaces()
;;
dir-860l-b1|\
elecom,wrc-1167ghbk2-s|\
elecom,wrc-2533gst|\
iodata,wn-ax1167gr|\
iodata,wn-gx300gr)
ucidef_add_switch "switch0" \
@ -466,6 +467,7 @@ ramips_setup_macs()
wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
;;
elecom,wrc-1167ghbk2-s|\
elecom,wrc-2533gst|\
sk-wb8)
wan_mac=$(mtd_get_mac_binary factory 57350)
;;

View File

@ -55,6 +55,7 @@ platform_check_image() {
duzun-dm06|\
e1700|\
elecom,wrc-1167ghbk2-s|\
elecom,wrc-2533gst|\
esr-9753|\
ew1200|\
ex2700|\

View File

@ -0,0 +1,178 @@
/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "elecom,wrc-2533gst", "mediatek,mt7621-soc";
model = "ELECOM WRC-2533GST";
aliases {
led-status = &led_power_green;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x8000000>;
};
chosen {
bootargs = "console=ttyS0,57600";
};
gpio-leds {
compatible = "gpio-leds";
led_power_green: power_green {
label = "wrc-2533gst:green:power";
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
};
power_blue {
label = "wrc-2533gst:blue:power";
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
};
wps {
label = "wrc-2533gst:red:wps";
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
power_red {
label = "wrc-2533gst:red:power";
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
client {
label = "client";
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
ap {
label = "ap";
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
extender {
label = "extender";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
router {
label = "router";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
};
};
&ethernet {
mtd-mac-address = <&factory 0xe000>;
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xb00000>;
};
partition@b50000 {
label = "tm_pattern";
reg = <0xb50000 0x380000>;
read-only;
};
partition@ed0000 {
label = "tm_key";
reg = <0xed0000 0x80000>;
read-only;
};
partition@f50000 {
label = "art_block";
reg = <0xf50000 0x30000>;
read-only;
};
partition@f80000 {
label = "user_data";
reg = <0xf80000 0x80000>;
read-only;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "uart3", "jtag", "wdt", "sdhci";
ralink,function = "gpio";
};
};
};
&pcie {
status = "okay";
// WRC-2533GST has MT7615 for 2.4/5 GHz wifi,
// but it's not supported in OpenWrt.
};
&xhci {
status = "disabled";
};

View File

@ -4,6 +4,19 @@
DEVICE_VARS += TPLINK_BOARD_ID TPLINK_HEADER_VERSION TPLINK_HWID TPLINK_HWREV
define Build/elecom-gst-factory
$(eval product=$(word 1,$(1)))
$(eval version=$(word 2,$(1)))
( $(STAGING_DIR_HOST)/bin/mkhash md5 $@ | tr -d '\n' ) >> $@
( \
echo -n "ELECOM $(product) v$(version)" | \
dd bs=32 count=1 conv=sync; \
dd if=$@; \
) > $@.new
mv $@.new $@
echo -n "MT7621_ELECOM_$(product)" >> $@
endef
define Build/elecom-wrc-factory
$(eval product=$(word 1,$(1)))
$(eval version=$(word 2,$(1)))
@ -104,6 +117,16 @@ define Device/elecom_wrc-1167ghbk2-s
endef
TARGET_DEVICES += elecom_wrc-1167ghbk2-s
define Device/elecom_wrc-2533gst
DTS := WRC-2533GST
IMAGE_SIZE := 11264k
DEVICE_TITLE := ELECOM WRC-2533GST
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) |\
elecom-gst-factory WRC-2533GST 0.00
endef
TARGET_DEVICES += elecom_wrc-2533gst
define Device/ew1200
DTS := EW1200
IMAGE_SIZE := $(ralink_default_fw_size_16M)